Linux Process on Database Server

Hi all,
I´ve created a shell script on the Linux server (Red Hat 9) with Oracle 9i.
This shell script call the sqlplus and it performs some SQL commands.
I start the shell script using Putty tool. The network is with some
problems. When the network falls, the shell script process on Linux
falls too. Why? The process is local, on server.
thanks!!!!

This is not an Oracle question.
Every Unix process has three files associated: stdin, stdout, and stderr: standard input, standard output, and standard error.
Standard input in a terminal session is your keyboard, standard output and standard error is your terminal screen.
If the connection is interrupted Unix won't be able to deliver any output, so the process is killed.
You either need to make sure the network problems are adressed, or you run the script using cron or better still: Oracle Enterprise Manager.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

High I/O wait observed in Linux based Oracle Database Server

Hi,
We have just migrated Oracle Database from Solaris Server to Linux VM [ESX] server.
We have observed that there is high I/O wait issues while database query is running on Linux VM, which was ideally zero in case of Solaris. The same Database was running with no i/o wait on solaris physical server.
In the same ref.I would like to below points.
- Recommendations for running Oracle on VM based Linux.
- Recommendations from ESX Host side
Please suggest.

user558914 wrote:
We have just migrated Oracle Database from Solaris Server to Linux VM [ESX] server.
We have observed that there is high I/O wait issues while database query is running on Linux VM, which was ideally zero in case of Solaris. The same Database was running with no i/o wait on solaris physical server.What did you expect? A virtualised I/O subsystem to respond and perform like a real one?
That would a very unrealistic expectation. And as comparisons go, as sensible as comparing the taste of an apple with the odour of the colour blue.
Forget about comparisons. Only marketing, sales and the idiot believe the cr@p that introducing several s/w layers between the the target (e.g. sector on spinning rust) and the destination (e.g. Oracle) makea the path between target and destination, faster.
To optimise the virtualised target, you need to make the path as short as possible. If your virtual disk is for example a file on a cooked file system on the host, then you are introducing the host's complete I/O layer for accessing that virtual drive. If your virtual disk is an actual (raw) partition or drive on the host, then path is faster - passing through the host kernel as direct I/O and bypassing the host's cache and file system drivers.
I suggest that when you setup your virtualised environment, you do proper stress testing of the various configurations of a virtualised I/O subsystem, using something like fio.

DatabaseMetaData error when connect to Linux or Solaris Database Server

I write some code to display table structure of a table,when I connect to sybase,sql server,oracle on Windows or HP or AIX, it works well,but when I connect to Oracle 8.1.7 or Oracle 9.0.1 on Linux and Solaris, these code does not work correctly. My oracle jdbc driver is 9.0.1.

As a copy of this query has been posted to the CR design forum at 11:21, assuming this is indeed a design question.
Thus setting this thread as answered.
- Ludek

Install HRCS 9.0 R5 with Linux Issue: upgrade Database HRCS 9.0 from PT8.52 to PT8.53

Folks,
Hello. I have been installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and client machine is Windows XP. My internet architecture is WebLogic11g/Tuxedo11g/OracleDatabase 11gR1. Peopletools 8.53 runs correctly in browser.
In Oracle Linux 5.10 Database Server machine, I run the scripts "createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql" one by one. Then I use Data Mover to load data from Windows XP into Oracle Linux 5.10 DB instance HRCS90. The Data Mover script hrcs90ora.dms completes successfully in Windows XP. Configuration Manager is set up correctly. But when I login into Application Designer, I cannot login and get the message as below:
"Security Table Manager (Get): The database is at release 8.52. The PeopleTools being run require databases at release 8.53."
I have been following the document http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf to upgrade HCM and Human Resources 9.0 Revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I have been following chapter 4 task by task to do. Actually, I have run 4 scripts into HRCS90 as below:
Task 4-3-5: run rel853.sql at SQL> in Linux.
Task 4-3-6: run grant.sql at SQL> in Linux.
Task 4-5-3: run ddlora.dms in Windows XP Data Mover into HRCS90.
Task 4-6: run msgtlsupg.dms in Windows XP Data Mover into HRCS90.
Then need to run Task 4-7 to copy project ppltls84cur Project in Application Designer. When login into Application Designer with Database HRCS90 and UserID and pwd PS, I get the same error message as below:
"The database is at release 8.52. The PeopleTools being run require Database at release 8.53."
Application Designer is supposed to login by Task 4-7 to copy projects but it cannot. I have tried to fing out what's wrong as below:
In task 4-1-3: I cannot run script dbtsfix.sqr in Linux and Windows XP.
In task 4-1-9: script ptupgibdel.sql does not have the string "End of PT8.53". There is no script ptupgibdel853.sql to run.
In task 4-3-6: when run script grant.sql, table PSSTATUS and PSACCESSPRFL don't exist. There is only PSOPRDEFN table.
I continue to do task by task in chapter 4 until task 4-27 that's the end, but Application Designer still cannot login. All of Application Engine Programs and SQR Programs cannot run.
My questions are:
First, does Oracle Database HRCS90 has table PSOPRDEFN only without table PSSTATUS and PSACCESSPRFL ?
Second, what's the error by task 4-7 when Application Designer still cannot login ?
Third, why Application Designer still cannot login a the end of doing chapter 4 task 4-27 ? How to solve the issue ?
Thanks.
Thanks.

I'm not quite sure what you are missing, but it looks like you missed a script which could cause problems. You need to look through your logs for errors. Are you running rel853 as the AccessID user? I don't know how you would trash PSSTATUS in this process.
You don't mention running this.
Task 4-3-2: Creating Tablespaces
This step runs the PTDDLUPG script, which builds new tablespaces as part of the upgrade to the new PeopleSoft release.
It creates tablespace PSIMAGE2, which doesn't exist in the datamover load you did. Oracle moves and puts around 208 tables here when you run rel853 from what I see.
The first line of rel853 is
UPDATE PSSTATUS SET TOOLSREL='8.53',
LASTREFRESHDTTM = SYSDATE
This is what changes the tools release, sometimes people just run this one update to gain quick and dirty access to a different version.
I pulled this download and ran through it myself without incident doing all the steps you say, adding in 4-3-2 which you seemed to have skipped. I built a system database.
My hcengs.log shows
Importing PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS 1
Building required indexes for PSSTATUS
Updating statistics for PSSTATUS
Records remaining: 7686
After import, PSSTATUS is
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.52
After running rel853n it's now
SQL> COMMIT
2 ;
Commit complete.
SQL> SPOOL OFF
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.53
I ran the other 3 quick scripts. Not sure if it was necessary, but I reset the passwords and re-encrypted them with the new 8.53 datamover for the new salted encryption and fired up app designer. It works. By the way, you should probably run rel853n, it utilizes "newer" (for PeopleSoft that is) data-types than just rel853.sql that were delivered with the 9.0 application line. Since this is a new 9.0 based app build it should be used.

Performance issue with database server

Hello,
We have installed ECC 6.0 on HP UX 11.23 OS with Oracle as database.
We have cluster environment in our production severs.
One server as DB-CI installed and other as Dialogue Instance installed.
After installation, the dialogue instance (Application server))works fine but if we login into DB server and execute any t-code It takes too much time or just stuck.
and after that if I go to application and execute that t-code it works fine and after that if I go to database and execute that t-code now even in DB it works fine.
Kindly guide me.
Thanks,
Chandresh Pranami.

Hi Chandresh,
Check below things for your Database server.
SM50 - Workprocess status busy or wait
ST04 - Data buffer hit ratio
SM37 - Any background job running there.
Normally even if you are login through a diffrent app server the database side execution will happen in db server only.Application server will do the execution but the data read and to be updated will happen in db server only.When the sql request will go to db server may select update..types of sql then it willalways will be processed by db server.
So there will be lot of load already thereIg you execute your work here it will take more time because more load for the application will be there.
Regards
Ashok

Unix/Linux Process Monitoring

When I attempt to run the add monitoring wizard in Operations Manager 2012 R2 against the unix/linux process monitor I receive the following error :-
Date: 12/02/2015 11:55:23
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UISDKException: The page [Microsoft.SystemCenter.CrossPlatform.UI.OM.Integration.Authoring.ProcessTemplate.ProcessDetailsPage] in the assembly [Microsoft.SystemCenter.CrossPlatform.UI.OM.Integration.Authoring.ProcessTemplate,
Version=7.0.6000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the Management Pack that defines this page is installed
or the assembly containing the page is in the path of the executable or that the page derives from known Operations Manager page type. ---> System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions
property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.CreatePage(String assemblyName, String typeName)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.CreatePage(String assemblyName, String typeName)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.GetPages()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomTemplatePagesManager.GetPages()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.PageManagerBase.AttachToFramework(IPageFramework pageFramework, Boolean readOnly)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Pages.TemplateListPage.AddPagesForSelectedItem()
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.UIPageSet.CreatePage(String assemblyName, String typeName)
I receive this in my test lab and in a live environment. Both environments are running Operations Manager 2012 R2 and I have imported the latest management packs which are 7.5.1042.0.
I am full administrator at the server and operations manager level. So what is it I am missing?
Thanks.

Agree with Steve, Upgrade to last UR, This issue is related to Management Pack so that Check correct version of Management Pack which is compatible with SCOM 2012R2
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Oracles Patchset 6 (9.2.0.7) for the 9.2 Database Server and some stats

Hi,
look ( http://orcasoracle.blogspot.com/ ) at some statistics about the Patchsets of the Oracle 9.2 Database Server.
regards
Carl

Yes!
the problem is that .NET is availabe only on WinX Platforms.
I hve heared somethong of mono a .NET Framework on Linux/Unix.
But it's not only this base it's the question which tools/Patterns/Principials
they use to ensure high quality coding.
Carl

How to get log information from database server?

Oracle 9.2 in Unix
we got blocking error in the production database last midnight for 40 min and nothing was being processed during that time which delayed our production night batch process. Then it was gone after 40min. I like to know what was happening during that time in the database. My question is where I can find error in the database server? In bdump? Appreciate any ideas.
Thanks
S.

If you have jobs regularly collect statspack report, then it will be easier to troubleshoot. You can just pull the report from the time period.
A couple of things you can check if there's any storage issue during the time, like some backup or other jobs running taken all OS storage, so Oracle hung because no space to archive logs. Usually this will log errors in alert.log but if bdump destination also full, the error will not be logged.
Check OS activity during the time frame, what's CPU and IO activity. See if you have sar installed and configured
check OS message file.

How to access a PDF file from Oracle DATABASE SERVER

Hi
I have some pdf files in "\home2\docs" directory in Oracle database server 10g. (OS is Linux) I want to access those pdf files from my client system through Oracle Forms. How is it possible?
Please Help!!!! It is very urgent !!!
Expecting fast response!!!!!
Bye

hi
Thank u for ur response.
Initially i tried to access pdf file from database server. I didn't get any solution for that. So I copied all my pdf files to Application server which is in Linux environment at "/home2/docs" directory.
I gave the following command for accessing the pdf files kept in Lnux Application Server from Oracle 10g forms in a button press trigger.
web.show_document('http://192.168.1.53:7779/home2/docs/test.pdf');
It says "page cannot be found"
So I copied one of the pdf file named "test.pdf" to "/oracle/oas10g/IasHome/forms90/java" in Linux Application Server . Then the following command
web.show_document('http://192.168.1.53:7779/forms90/java/test.pdf');
has opened the the pdf file in browser.
192.168.1.53 is my Linux Application Server IP. and 7779 is the port.
Actually we have lacs of pdf files. So i cannot keep all the pdf files in "/oracle/oas10g/IasHome/forms90/java" directory in Linux Application Server. And also all the pdf files not in the same directory , "/home2/docs" some of the pdf files r in the subdirectories of "/home2/docs/" like /home2/docs/sub1, /home2/docs/sub2, /home2/docs/sub3 etc.
Then how to configure my "/oracle/oas10g/IasHome/forms90/server/forms90.conf" file for retrieving pdf files from "/home2/docs/" and its subdirectories. Is Anything other than this, required for solving my problems.
Now My PDF files r in LINUX APPLICATION SERVER not in database server.
Please help!! It is VERY URGENT!!!

Oracle 6i forms & Oracle 9i Database server

Hi everyone,
i recently got appointed in a company as an Oracle DBA...i dont have ne prior experience as an Oracle DBA or developer...i have some general questions regarding Oracle 6i forms...May be u gurus can help me out.
# We have our financial application on oracle 6i forms and oracle 9i as database server. I am trying to create an environment on my test server in order to get familiar with oracle 6i forms, i have the required softwares....whn i start the installation for Oracle 6i forms. it looks for Oracle home and selects Orahome_9 by default.
# Then it asks me for
* Oracle forms developer
*Oracle forms Server
*Oracle Reports Developer
*Oracle Reports Server
i ges i need oracle forms developer,so i check the option and click ok.
# Next it asks me what type of installation id like to perform
*Typical or Custom.
I dont know how to proceed from here, as i dont have much idea about Oracle forms...i kno i must go through documentation.Ive already started that process but a lil advice from yall wud be a gr8 help too...Id luv to hear if u need ne further information bout the configuration...Thanks fr readin.

hi
i would like to prefer you Typical installations.
please checkout the following links for documentations.
http://www.oracle.com/technology/documentation/index.html
http://www.oracle.com/technology/documentation/6i_forms.html
http://www.oracle.com/technology/documentation/oracle9i.html
i hope it will help you.
sarah
Edited by: SaRaH on Jul 14, 2010 4:27 AM

Database server address space

In the document "Database developers guide" is written the following:
"Most significantly, from the point of view of performance, you should note that only PL/SQL and Java methods run within the address space of the server. C/C++ methods are dispatched as external procedures, and run on the server machine but outside the address space of the database server. "
what does it mean - "the address space of the server" ?

Hi,
Its means that it will use free space available in the Memory (i.e., not within the SGA).
Memory = Oracle used Memory (SGA + PGA) + OS Process Memory + Other Running process Memory + Free Memory.
This C/C++ programs will use the free memory.
Regards,
Soumyajit

How to send e-mail with an attachment from remote database server.???

Hi All,
I have tried the simple mail sending and with the attachment using UTL_SMTP. But the problem is , it is sending the mail with attachment of the file name i give, it takes and creates that file and sends as attachment not from the actual file location. I am trying to attach the file which i stored in remote database server.
The following code I tried. But not worked for attachment
DECLARE
   v_From       VARCHAR2(80) := '[email protected]';
   v_Recipient VARCHAR2(80) := '[email protected]';
   v_Subject    VARCHAR2(80) := 'test subject';
   v_Mail_Host VARCHAR2(30) := 'pop3.somedomain.com';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
    'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
    'From: '   || v_From || crlf ||
    'Subject: '|| v_Subject || crlf ||
    'To: '     || v_Recipient || crlf ||
    'MIME-Version: 1.0'|| crlf ||     -- Use MIME mail standard
    'Content-Type: multipart/mixed;'|| crlf ||
    ' boundary="-----SECBOUND"'|| crlf ||
    crlf ||
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/html;'|| crlf ||
    'Content-Transfer_Encoding: 7bit'|| crlf ||
    crlf ||
    'some message text'|| crlf ||     -- Message body
    'more message text'|| crlf ||
    crlf ||
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/html;'|| crlf ||
    ' name="Fund Authorization report"'|| crlf ||
    'Content-Transfer_Encoding: 8bit'|| crlf ||
    'Content-Disposition: attachment;'|| crlf ||
    ' filename="/usr/tmp/Test.html"'|| crlf ||
    crlf ||
    'HTML Attachment'|| crlf ||     -- Content of attachment
    crlf ||
    '-------SECBOUND--'               -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;How can I attach a file which is stored in database server and send it in a mail.
Please someone help me in this.
Thanks,
Alaka.

Try this code
Regards Salim.
CREATE OR REPLACE TRIGGER EmailOnServerErr AFTER SERVERERROR ON DATABASE
DECLARE
   mail_conn       UTL_SMTP.connection;
   crlf            VARCHAR2(2) := chr(13)||chr(10);
   msg             VARCHAR2(32760);
   sid_name        VARCHAR2(16);
   bdump_dest      VARCHAR2(128);
   smtp_relay      VARCHAR2(32) := 'MyMailRelay';
   recipient_address VARCHAR2(64) := '[email protected]';
   sender_address     VARCHAR2(64) := '[email protected]';
   mail_port       NUMBER := 25;
   log_file_handle UTL_FILE.FILE_TYPE;
   log_file_dir    VARCHAR2(256) := 'ERR_LOG_DIR';
   log_file_name   VARCHAR2(256) := 'OracleErrors.log';
   maxlinesize     NUMBER := 32767;
   session_rec     sys.v_$session%ROWTYPE;
   audit_rec       sys.dba_audit_trail%ROWTYPE;
   auditing        BOOLEAN;
   LinesOfSQL      BINARY_INTEGER;
   offending_sql   DBMS_STANDARD.ora_name_list_t;
   CURSOR bdump_cur IS
      SELECT TRIM(value)
      FROM v$parameter
      WHERE name = 'background_dump_dest'
   CURSOR sid_cur IS
      SELECT TRIM(instance_name)
      FROM v$instance
   CURSOR session_cur IS
      SELECT s.*
      FROM v$session s
      WHERE s.sid = dbms_support.mysid
   CURSOR audit_trail_cur(AUDSID IN NUMBER) IS
      SELECT *
      FROM dba_audit_trail
      WHERE sessionid = AUDSID
BEGIN
   IF (USER = 'SYSTEM' OR USER = 'SYS') THEN
      -- Ignore this error
      NULL;
   ELSIF IS_SERVERERROR (1034) THEN
      -- Ignore this error
      NULL;
   ELSE
      -- get the sid
      OPEN sid_cur;
      FETCH sid_cur INTO sid_name;
      CLOSE sid_cur;
      -- get the location of the alert log
      OPEN bdump_cur;
      FETCH bdump_cur INTO bdump_dest;
      CLOSE bdump_cur;
      -- get the session information
      OPEN session_cur;
      FETCH session_cur INTO session_rec;
      CLOSE session_cur;
      -- get the audit_trail information if it exists
      OPEN audit_trail_cur(session_rec.audsid);
      FETCH audit_trail_cur INTO audit_rec;
      auditing := audit_trail_cur%FOUND;
      CLOSE audit_trail_cur;
      IF session_rec.program = 'MyProgram.exe' THEN
         NULL; -- ignore actions from MyProgram - that's where I do maintenance
      ELSE
         -- compose the message
         msg := 'Subject: Oracle error '||' on '||sid_name||crlf;
         msg := msg||'To: '||recipient_address||crlf;
         msg := msg||'For more information see the alert log file located at:'||crlf;
         msg := msg||bdump_dest||'/alert_'||sid_name||'.log'||crlf;
         msg := msg||'or the error log file: $'||log_file_dir||'/'||log_file_name||crlf;
         msg := msg||'Error Time='||TO_CHAR(SYSDATE,'DD-Mon-YYYY HH24:MI:SS')||crlf;
         msg := msg||DBMS_UTILITY.FORMAT_CALL_STACK||crlf;
         LinesOfSQL := sql_txt(offending_sql);
         msg := msg||'Offending SQL is:'||crlf;
         FOR loop_counter IN offending_sql.FIRST..offending_sql.LAST
         LOOP
            msg := msg||offending_sql(loop_counter);
         END LOOP;
         msg := msg||crlf||'----- PL/SQL Error Stack -----'||crlf;
         msg := msg||DBMS_UTILITY.FORMAT_ERROR_STACK||crlf;
         msg := msg||'V$SESSION.SADDR='   ||session_rec.saddr   ||crlf;
         msg := msg||'V$SESSION.SID='     ||session_rec.sid     ||crlf;
         msg := msg||'V$SESSION.SERIAL#=' ||session_rec.serial# ||crlf;
         msg := msg||'V$SESSION.AUDSID=' ||session_rec.audsid ||crlf;
         msg := msg||'V$SESSION.PADDR='   ||session_rec.paddr   ||crlf;
         msg := msg||'V$SESSION.USER#='   ||session_rec.user#   ||crlf;
         msg := msg||'V$SESSION.USERNAME='||session_rec.username||crlf;
         msg := msg||'V$SESSION.COMMAND=' ||session_rec.command ||crlf;
         msg := msg||'V$SESSION.OWNERID=' ||session_rec.ownerid ||crlf;
         msg := msg||'V$SESSION.TADDR='   ||NVL(session_rec.taddr   ,'Null')||crlf;
         msg := msg||'V$SESSION.LOCKWAIT='||NVL(session_rec.lockwait,'Null')||crlf;
         msg := msg||'V$SESSION.STATUS=' ||NVL(session_rec.status ,'Null')||crlf;
         msg := msg||'V$SESSION.SERVER=' ||NVL(session_rec.server ,'Null')||crlf;
         msg := msg||'V$SESSION.SCHEMA#=' ||session_rec.schema#||crlf;
         msg := msg||'V$SESSION.SCHEMANAME=' ||NVL(session_rec.schemaname,'Null')||crlf;
         msg := msg||'V$SESSION.OSUSER='     ||NVL(session_rec.osuser    ,'Null')||crlf;
         msg := msg||'V$SESSION.PROCESS='    ||NVL(session_rec.process   ,'Null')||crlf;
         msg := msg||'V$SESSION.MACHINE='    ||NVL(session_rec.machine   ,'Null')||crlf;
         msg := msg||'V$SESSION.TERMINAL='   ||NVL(session_rec.terminal ,'Null')||crlf;
         msg := msg||'V$SESSION.PROGRAM='    ||NVL(session_rec.program   ,'Null')||crlf;
         msg := msg||'V$SESSION.TYPE='       ||NVL(session_rec.type      ,'Null')||crlf;
         msg := msg||'V$SESSION.SQL_ADDRESS='    ||session_rec.sql_address ||crlf;
         msg := msg||'V$SESSION.SQL_HASH_VALUE=' ||NVL(TO_CHAR(session_rec.sql_hash_value) ,'Null')||crlf;
         msg := msg||'V$SESSION.PREV_SQL_ADDR=' ||session_rec.prev_sql_addr||crlf;
         msg := msg||'V$SESSION.PREV_HASH_VALUE='||NVL(TO_CHAR(session_rec.prev_hash_value),'Null')||crlf;
         msg := msg||'V$SESSION.MODULE='     ||NVL(session_rec.module              ,'Null')||crlf;
         msg := msg||'V$SESSION.MODULE_HASH='||NVL(TO_CHAR(session_rec.module_hash),'Null')||crlf;
         msg := msg||'V$SESSION.ACTION='     ||NVL(session_rec.action              ,'Null')||crlf;
         msg := msg||'V$SESSION.ACTION_HASH='||NVL(TO_CHAR(session_rec.action_hash),'Null')||crlf;
         msg := msg||'V$SESSION.CLIENT_INFO='||NVL(session_rec.client_info         ,'Null')||crlf;
         msg := msg||'V$SESSION.FIXED_TABLE_SEQUENCE='||NVL(TO_CHAR(session_rec.fixed_table_sequence),'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_OBJ#=' ||NVL(TO_CHAR(session_rec.row_wait_obj#) ,'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_FILE#=' ||NVL(TO_CHAR(session_rec.row_wait_file#) ,'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_BLOCK#='||NVL(TO_CHAR(session_rec.row_wait_block#),'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_ROW#=' ||NVL(TO_CHAR(session_rec.row_wait_row#) ,'Null')||crlf;
         msg := msg||'V$SESSION.LOGON_TIME='     ||NVL(TO_CHAR(session_rec.logon_time,'DD-Mon-YYYY HH24:MI:SS'),'Null')||crlf;
         msg := msg||'V$SESSION.LAST_CALL_ET='   ||NVL(TO_CHAR(session_rec.last_call_et)   ,'Null')||crlf;
         msg := msg||'V$SESSION.PDML_ENABLED='   ||NVL(session_rec.pdml_enabled   ,'Null')||crlf;
         msg := msg||'V$SESSION.FAILOVER_TYPE=' ||NVL(session_rec.failover_type ,'Null')||crlf;
         msg := msg||'V$SESSION.FAILOVER_METHOD='||NVL(session_rec.failover_method,'Null')||crlf;
         msg := msg||'V$SESSION.FAILED_OVER='    ||NVL(session_rec.failed_over    ,'Null')||crlf;
         msg := msg||'V$SESSION.RESOURCE_CONSUMER_GROUP='||NVL(session_rec.resource_consumer_group,'Null')||crlf;
         msg := msg||'V$SESSION.PDML_STATUS='    ||NVL(session_rec.pdml_status    ,'Null')||crlf;
         msg := msg||'V$SESSION.PDDL_STATUS='    ||NVL(session_rec.pddl_status    ,'Null')||crlf;
         msg := msg||'V$SESSION.PQ_STATUS='      ||NVL(session_rec.pq_status      ,'Null')||crlf;
         IF auditing THEN
            msg := msg||'DBA_AUDIT_TRAIL.OS_USERNAME=' ||NVL(audit_rec.os_username,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.USERNAME='     ||NVL(audit_rec.username   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.USERHOST='     ||NVL(audit_rec.userhost   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.TERMINAL='     ||NVL(audit_rec.terminal   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.TIMESTAMP='    ||TO_CHAR(audit_rec.timestamp,'DD-Mon-YYYY HH24:MI:SS')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OWNER='        ||NVL(audit_rec.owner      ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OBJ_NAME='     ||NVL(audit_rec.obj_name   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ACTION='       ||audit_rec.action   ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ACTION_NAME=' ||NVL(audit_rec.action_name   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.NEW_OWNER='    ||NVL(audit_rec.new_owner     ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.NEW_NAME='     ||NVL(audit_rec.new_name      ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OBJ_PRIVILEGE='||NVL(audit_rec.obj_privilege ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SYS_PRIVILEGE='||NVL(audit_rec.sys_privilege ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ADMIN_OPTION=' ||NVL(audit_rec.admin_option ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.GRANTEE='      ||NVL(audit_rec.grantee       ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.AUDIT_OPTION=' ||NVL(audit_rec.audit_option ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SES_ACTIONS=' ||NVL(audit_rec.ses_actions   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_TIME=' ||NVL(TO_CHAR(audit_rec.logoff_time) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LREAD=' ||NVL(TO_CHAR(audit_rec.logoff_lread) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_PREAD=' ||NVL(TO_CHAR(audit_rec.logoff_pread) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LWRITE='||NVL(TO_CHAR(audit_rec.logoff_lwrite),'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_DLOCK=' ||NVL(audit_rec.logoff_dlock ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.COMMENT_TEXT=' ||NVL(audit_rec.comment_text ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SESSIONID='    ||audit_rec.sessionid   ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ENTRYID='      ||audit_rec.entryid     ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.STATEMENTID=' ||audit_rec.statementid ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.RETURNCODE='   ||audit_rec.returncode ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.PRIV_USED='    ||NVL(audit_rec.priv_used,'Null')||crlf;
         END IF;
         msg := msg||'-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'||crlf||crlf;
         -- write the message to the error log file
         log_file_handle := UTL_FILE.FOPEN (log_file_dir, log_file_name, 'A',maxlinesize);
         UTL_FILE.PUT_LINE(log_file_handle,msg);
         UTL_FILE.FCLOSE(log_file_handle);
         -- send the message by Email
         mail_conn := UTL_SMTP.open_connection(smtp_relay, mail_port);
         UTL_SMTP.HELO(mail_conn, smtp_relay);
         UTL_SMTP.MAIL(mail_conn, sender_address);
         UTL_SMTP.RCPT(mail_conn, recipient_address);
         UTL_SMTP.DATA(mail_conn, msg);
         UTL_SMTP.QUIT(mail_conn);
      END IF; -- client_program = MyProgram.exe
   END IF;
END;
/

10gR2 to 11gR2 from Windows to Linux with 6TB Database.

Hi,
I need to do migration from 10gR2 to 11.2.0.2.0 and from Windows to Linux for 6TB database Size. As both Endian format same, I did the migration using RMAN Convert database on UAT but for same 10gR2 version.(Both Source on Target Oracle Version was 10.2.01.0). Now I have to migrate from 10gR2 to 11.2.0.2.0. So it's 2 way process.
is it possible to club these 2 way migration process ???
Are following steps right or any modification is required ??
1) Install 11.2.0.2.0 on Linux OS
2) Open Source Database (Windows) in Read Only. Generate TRANSPORT.SQL, CONVERTSCRIPT.RMAN & Pfile.
3) Copy Source datafiles in temporary location on Target OS. Also copy above files.
4) Create dummy controlfile.
5) Startup nomount with Changed pfile
6) Mount database with Dummy Controlfile.
7) Run CONVERTSCRIPT.RMAN to convert actual datafiles from Windows Platform to Linux Platform.
8) Shutdown the instance and delele Dummy Controlfiles.
9) Edit TRANSPORT.SQL and do Appropriate Changes like redolog files, datafiles path...
Now my question is, can I add ?/rdbms/admin/catupgrd.sql in TRANSPORT.SQL script after Startup upgarade command so that Complete Upgradation to 11.2.0.2.0 would be done.
10) Then run TRANSPORT.SQL on Target System (11.2.0.2.0)
Tell me if more inputs are required from my side...
Regards,
Manish

This forum deals with migrations from foreign databases to Oracle.
You might better post your request in this forum:
General Database Discussions

Failed to Establish Connection With SQL Database Server in Essbase studio

I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
I am getting the below Error while deploying the cube onto Essbase server.
error : Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
Thanks,
Swathi

Thanks for the reply.
There was a problem with my Essbase Server..so now i m pointing to other server.
now I am getting the below Error:
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
Please let me know how can I validate my cube and what changes might require in my Cube definitions?

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Linux Process on Database Server

Similar Messages

Maybe you are looking for