Lion Recovery disappeared after creating new partition
Hey there-
Today I created a new partition on my MacBook Pro hard drive in order to install a separate Snow Leopard partition on my machine... Prior to creating this partition, I had my regular Mac HD partition, Lion Recovery, and a BootCamp partition to choose from when booting up. After creating the new partition, I was able to install Snow Leopard on it without a hitch, but now when I reboot and hold the 'option' key to choose the boot source, only the Mac partition, Snow leopard partion, and BootCamp partition show up... Where did Recovery HD go? Is it still on my machine somewhere?
Thanks!
Well like I said, I already have file redundancy with my two computers and if the whole thing dies, I'll just do it all over again... I'm not too worried about that. But yeah, probably a good idea to keep a copy of the installer. I did download it overnight but by then my problem was already resolved, haha. *puts it in safe keeping*
I really only cared for Recovery HD for two things: Find my Mac (it's needed to boot into Guest only mode) and to do file system repairs in Disk Utility if necessary.
When I get a bigger capacity hard drive one day, maybe I'll clone the whole setup but for now I really only wanted that partition back for the two things I mentioned above.
But again, I still insist that the method in the link is a much faster way, step 1 being almost unnecessary.
The 10.7.2 update even includes this exact process in the background to replace the old Recovery partition with its newer version.
Similar Messages
-
I have a Hitachi disk that I use for media (photos, videos, etc..)
After using Ipartition to create a new partition on this disk, none of the files are visible any more.
The disk was never partiton before so this was the first partition created.
When I launch iPartition again, I notice that I now have a Microsoft FAT or NTFS type partion and a HFS partiton however there is no data at all under Finder.
What should I do to recover my files ?you don't need 3rd party to shrink and create a 2nd partition.
One partition is still partition, and there are others like Lion Recovery, GUID, EFI on there.
Repair the drive and make sure iPartition does what you want and current. Or just use DU instead.
And backup. -
Repairing Boot Camp after creating new partition
I'm running OS X 10.8 and Windows 7 x64 Pro.
After properly setting up Boot Camp to dual-boot Windows on my Mac mini, I decided to test whether or not it was true that creating another partition (a data partition for OS X) would interfere with Boot Camp. Wikipedia claims it does interfere but without citing a source, whilst the Boot Camp documentation itself only specifies that the disk must be a single partition _prior_ to setup - there's no mention of whether the disk must be _kept_ that way afterwards.
I opened Disk Utility, reduced the size of my OS X parition from 420GB to 80GB, and created a new partition in the unallocated space. Here's how it looks now:
When I attempted to proceed with the process, I did receive a warning that doing this (and I quote), "may" cause problems with Boot Camp. Seeing as it was inconclusive, I thought I'd give it a shot - nothing ventured…
Of course, it borked Boot Camp, otherwise I wouldn't be posting here. Whilst OS X boots just fine, the Boot Camp partition now no longer shows up in the Startup Manager, though it does in the Startup Disk prefPane. If I do attempt to boot into Boot Camp, I receive the following message on a black screen:
No bootable device --- insert boot disk and press any key
The advice given to someone who had this same problem was, "fix your damaged Boot Camp volume." But I'm at a loss as to how to do that.
So, anyone know how to proceed now so that I can keep my partitions as is, whilst fully restoring normal Boot Camp functionality?Hi,
@Christopher Murphy:
Okay, you seem confident. Let's give this a shot. I use the command-line myself for the odd thing, so I'll try not to bail.
Results of the "sudo gpt -r -vv show disk0" command:
gpt show: disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
gpt show: disk0: PMBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 976773167
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - REDACTED UUID
409640 156303528 2 GPT part - REDACTED UUID
156713168 1269536 3 GPT part - REDACTED UUID
157982704 659841040 4 GPT part - REDACTED UUID
817823744 262144
818085888 158687232 5 GPT part - REDACTED UUID
976773120 15
976773135 32 Sec GPT table
976773167 1 Sec GPT header
Results of the "sudo fdisk /dev/disk0" command:
Disk: /dev/disk0 geometry: 60801/255/63 [976773168 sectors]
Starting EndingSignature: 0xAA55
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 976773167] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Does this indicate a fix is possible? -
Lost Windows 7 boot option after creating new partition
First of all im new to Mac os.
i have installed windows 7 using boot camp and after it i tried to create a new partition from the main mac partition and it was created successfullly however now the windows 7 boot option is not available for some reason.
how can i have this option back?You broke it by adding the extra partition, remove Boot Camp (read the directions as to how) and start again. Do not add partitions next time.
Do not use Disk Utility to remove the Boot Camp Partition, use it to remove any extra partitions.
Backup your machine now. -
Repairing bootcamp after creating new partition
Like others who have posted here, I had two partitions, MacOS and Bootcamp that worked just fine. I then added a new partition because I need a "D" drive in Windows configuration to be able to install a particular set of programs that rely on such a configuration (long story and perhaps there was a better way). Once I added the new NTFS partition and rebooted, I no longer see the Windows drive as a a boot option. I don't know if the command line "sugo" utility and syntax that I've seen in postings here applies to all such situations but if anyone can guide me through it I would be very grateful. Thanks
No worries. Here you go. I'm glad you can interpret this stuff.
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1664355600 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1664765240 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1666034776 936
1666035712 44627968 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1710663680 242860032 5 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 1664355600] HFS+
3: AB 1023 254 63 - 1023 254 63 [1664765240 - 1269536] Darwin Boot
4: 07 1023 254 63 - 1023 254 63 [1666035712 - 44627968] HPFS/QNX/AUX
sudo dd if=/dev/rdisk0s5 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 a8 f6 65 |........?......e|
00000020 00 00 00 00 80 00 80 00 ff bf 79 0e 00 00 00 00 |..........y.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 9a b9 e6 6e d8 e6 6e 0c |...........n..n.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200 -
Recovery HD gone after creating new partition (to install Snow)
Hey all,
So I needed to reinstall Snow Leopard on my Macbook Pro, so in Disk Utility I shrunk the main partition by about 20gb and then installed Snow Leopard on that partition, so now I can dual-boot Lion and Snow Leopard.
But now the Recovery HD partition is gone. Is this normal and any way to get it back?Well like I said, I already have file redundancy with my two computers and if the whole thing dies, I'll just do it all over again... I'm not too worried about that. But yeah, probably a good idea to keep a copy of the installer. I did download it overnight but by then my problem was already resolved, haha. *puts it in safe keeping*
I really only cared for Recovery HD for two things: Find my Mac (it's needed to boot into Guest only mode) and to do file system repairs in Disk Utility if necessary.
When I get a bigger capacity hard drive one day, maybe I'll clone the whole setup but for now I really only wanted that partition back for the two things I mentioned above.
But again, I still insist that the method in the link is a much faster way, step 1 being almost unnecessary.
The 10.7.2 update even includes this exact process in the background to replace the old Recovery partition with its newer version. -
Problem in Creating New partition in Pavilion dm4 1217TX
I have a hp Pavilion dm4 1217TX model laptop. I want to partition the hard disk (640GB) to separate the OS to the data. I think this is a very basic safety feature that will save my data in case of Windows failure (which is a very common problem). I have already split the C Drive and the new condition of my hard drive is
System 199 MB Primary
C 70 GB Primary
Unallocated 494 GB Logical
Recovery 32 GB Primary
HP Tools 103 MB Primary
Now I can't create partition in the Unallocated space because of 4 Primary Partition it already has. Now what can I do ? I can't understand that why it comes with four Primary Partition and without any Extended partition.Hi, there, I have the same problem with you, because of the OEM of the laptop, they have partitioned our hard drive in advanced, however this partition is not logical. As we know, when we install Windows7, the system partition and system reserved partition are set as primary partition without doubt, but how could they make the HP tools and other partition as primary partitino too. I'm very unhappy with this. I don't know WHAT are they thinking about. Every one who has a bit comptuer knowloage knows the rules of createing new partitions in Windows. In my situation, I could only copy the data on recovery to C drive, then delete it. and recreate logical partition, then copy it back. Hope this could also help you.
-
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
Problem in Shrink my local disk C and create new partitions on it.
I am trying to Shrink my local disk C (current boot volume) and create new partitions on it. But I am getting a Warning message that If I do so, I won't be able to boot from any volume excepet the the current boot Volume.
In case if I need to do the recovery for my computer what will happen. does it mean that I can't do the recovery from my hard disk?
This question was solved.
View Solution.Kaj_R wrote:
I am trying to Shrink my local disk C (current boot volume) and create new partitions on it. But I am getting a Warning message that If I do so, I won't be able to boot from any volume excepet the the current boot Volume.
In case if I need to do the recovery for my computer what will happen. does it mean that I can't do the recovery from my hard disk?
Hello Kaj_R.
If you change the volumes it is quite likely that the recovery partition will not function. I suggest you create a set of Recovery Media before messing with the partitions.
This document can help you create the recovery media.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
I am getting error in createing new partition. orr error -14074
Hi , getting error in creating new partition as "ora-14074" partition bound must collate higher than that of the last partition"
Oracle version is - 9.2.0.6
OS version - SunOSHi,
show the statment that you want to create a new parition, and did you keep in mind the highest partition bound? Anyway, the problem seems to be easy to fix:
http://www.dba-oracle.com/t_ora_14074_partition.htm -
Hi Guys! I can not create new partition on my MacBook Pro. I don't what just happened on it. Before i could but these fews day i can't. When I try to create new partition it said: Partition failed. couldn't modify partition map because file system verify failed. My HHD is samsung sata 640GB.
When I went to iONE (Apple store in cambodia) they check for me and they said my HHD is no problem. So please help with this.
Thanks you so much......! any ideas please send to [email protected] or [email protected]I've just scanned my logs and I've found a lot of failed connections to teamviewer but I do not have this app installed. Can you suggest me a way to stop these connections? I found tons of messages like this:
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service[1428]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/Resources: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:31,851 com.apple.xpc.launchd[1]: (com.teamviewer.service) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer[1430]) Service could not initialize: Unable to set current working directory. error=2, path=/Applications/TeamViewer.app/Contents/MacOS: 14A389: xpcproxy + 12907 [1227][1016C726-9ACF-3A24-9C51-A279F5C6B167]: 0x2
21/10/14 14:45:37,239 com.apple.xpc.launchd[1]: (com.teamviewer.teamviewer) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
thx -
Hello.
I have a problem. I want to install WinXP via BootCamp and can't create new partition for it.
BootCamp Assistant crashes during partitioning (kernel panic), and when I use Leopard installation disk and try to create new partition in Disk Utility on DVD, it returns an error "No space left on device".
I repaired my hard disk many times (all errors were repaired) and still no improvement.
I don't want to format my disk to zero, because I don't use Time Machine and it would be really difficult to restore all the data.
Thank you in advance.Use Disk Utility Restore to copy your internal drive to an external USB/FW drive. Then reformat.
-
New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7
New Virtual hard disk wizard hangs after creating new vhd from huper-v manager on windows 7 workstation.
Windows 2008r2 hosts the hyper-v server. I can create VMs and VHD's when connecting to the server locally with the hyper-v manager.
The issue arises when I try to connect to the hyper-v server from my workstation which runs windows 7.
I have installed The Windows6.1-KB958830-x64-RefreshPkg.msu that was suggested for windows 7 sp1.
I can connect to the hyper-v server, create vm's but I cannot create vhd's the gui just hangs with no errors in event log or on screen.
The files are there on the hyper-v hard drive but i suspect they are just created by windows as they are written and are not valid.I've had just the same solution. Both did Hang Fixed size and flexible.
Two parts were taken:
1 - KB939820 for Windows 2003 server based domain controllers
2 - disable using IPv6 on your NIC
Result - both types of VHD's are created normaly.
-----Infrastructure----
Windows 2003 Domain upgtraded to 2008R2
Windows Server 2008R2 Hyper-V - virtualisation clustered
Windows 7 Pro - Hyper-V management
Feel free to use --Mark as answer-- or --Propose as answer-- option and rate if a comment helps you or seemed usefull. -------------- Не забывайте использовать кнопки --От&#1084;етить как ответ-- или --Предложить как ответ-- и проголосовать, если
ко&#1084;&#1084;ентарий ва&#1084; по&#1084;ог или кажется полезны&#1084;. -
My iphone 5 is stuck in recovery mode after downloading new apple software, does anyone know how to fix this I keep getting error message 3014 ?
i dont know but you went through all of this
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
After i had created new partition, bootcamp partition was disappear in the boot screen
I was created a new partition for mac os x yosemite after that day I cant see bootcamp partition on boot screen (press alt while startup) but bootcamp partition can see in desktop and system preferences>startup disk. When I was startup windows from preferences>startup disk, I see this writing "no bootable device".
So how can I fix my windows partition? Please help!!!
Christopher Murphy can you help me? You look like expert of this area.
Are these help for the solution?
Merts-MacBook-Pro-2:~ Mert$ sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1243298208 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1243707848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1244977384 5422872
1250400256 703123456 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
Merts-MacBook-Pro-2:~ Mert$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 1243298208] HFS+
3: AB 1023 254 63 - 1023 254 63 [1243707848 - 1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [1250400256 - 703123456] Win95 FAT32LYou can not create another partition on a drive containing a Boot Camp partition. You now need to erase then format your drive. Reinstall OSX then reuse Boot Camp Assistant to create a new Boot Camp partition. Reinstall Windows. Ensure you copy off all your data before erasing and formatting the drive.
Maybe you are looking for
-
How do I view bookmarks from a saved profile from 7 months ago
I am missing some bookmarks. I must have accidentally deleted them some time ago. I have an old profile saved from 6-7 months ago that would have the missing bookmarks. How can I open one of the backup bookmarks files from the old profile or convert
-
Mobile apps with phonegap + mysql ?
Hi, i was searching for a long time but didn't find answers. is it possible to show database-driven content within mobile apps made with dreamweaver cs6 ? If so, are there any examples or tutorials on the adobesite or elsewhere? Looking forward for a
-
I've heard / read conflicting info on these, so hoping you all can clarify. The company I work for is considering switching to creative cloud, however, are unsure of the following: 1.) Will the software still work if internet connections go down? 2.)
-
Does PS Elements 3 have actions, if so I can't find them? Can someone please point me in the right direction in the program? Thank you for reading. Val
-
I have an 8830 based in Canada with Bell. In Peru the sim card doesn't seem to work at all. The locals say this is a common issue. Does anyone have a solution, please!