Liquid list custom template does not link to detail layout

I have a custom template I have setup and working fine, but the problem i have is that I cannot link to the detail layout of the webapp, keep getting page not found. This is my code:
<ul>
    <li><a href="{{item_url}}">{{item.name}}</a></li>
    <li><a href="{{item_url}}">{{item.CompName}}</a></li>
</ul>

Hi there,
Are you running as a collection? Because you have item.name and item.CompName
If that is the case then those are fine, if not then just use name and CompName
If your NOT running a collection the liquid element for url is {{url}} and if you are running a collection {{item.url}}
If you called your custom field CompName because you did not know how to output a custom field with spaces in it, the liquid output for that sort of thing is...
{{item.['My Custom Field']}} Be it collection or not.

Similar Messages

  • Importing element definition from an  EDD into a template - does not work

    FM 10.0.1 German on Windows XP SP3.
    When importing the element definitions from an existing EDD into an existing template, FrameMaker converts the template into a  new EDD.
    So the element definitions which are correctly defined do not appear in the template.
    The highest level element is than ElementCatalog in the template and not the higherst lvel element defined in the EDD.
    In FM9 this was no issue.
    Any help is appreciated, I have a deadline and must do some changes in the EDD.
    Best Regards
    Thomas

    Lynne,
    EDD is english (Version FM7.0), Interface language is German.
    Maybe it´s a localization issue.
    I have attached a captivate demo pdf so you can see what happens and the
    defective EDD.
    Mit freundlichen Grüßen
    Best Regards
    Thomas Zeisig
    From:   Lynne Price <[email protected]>
    To:     "Th. Zeisig" <[email protected]>
    Date:   13.10.2011 14:12
    Subject:        Importing element definition from
    an  EDD into a template - does not work
    Re: Importing element definition from an EDD into a template - does not
    work
    created by Lynne Price in FrameMaker Structured - View the full discussion
    Thomas,
      No question the behavior you describe is a bug. However, I am unable to
    duplicate it. I created an EDD with two element definitions:
    Element (Container): doc
      Valid as the highest-level element.
      General rule:  (
      When I imported element definitions from this EDD into a new portrait
    document, FM reports that element a is referenced but not defined and that
    b is defined but not referenced. However, with all elements listed, the
    element catalog shows a, b, and doc. The metatemplate elements are not
    available.
      I wonder if this is a language-dependent problem. Is your EDD German or
    English? What about your user interface?
      Can you send me a short EDD that fails as you've described?
      Thanks,
          --Lynne
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3969067#3969067]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3969067#3969067]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in FrameMaker Structured by email or at Adobe
    Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • How to find a customer who does not have any activity in the last 5 years

    HI all,
       How to find a customer who does not have any activity in the last 5 years.
    Thanks & Regards,
    Moderator message: not directly related to ABAP development, please have a look in the respective functional forum.
    Edited by: Thomas Zloch on Jan 3, 2011 2:20 PM

    Post Author: tzinser
    CA Forum: Formula
    Okay, I left off a lot of important information...
    I'm using two tables
    TWDATA
    EVENT
    From TWDATA I'm pulling the fields TWDATA.OrderNumber and TWDATA.DisbursementDate
    From EVENT I'm pulling the fields EVENT.EventCode and EVENT.CompletedDate
    The two tables are linked by OrderNumber.

  • List data validation failed when creating a new list item but does not fail when editing an existing item

    Dear SharePoint Experts,
    Please help.
    Why does my simple formula work in Excel but not-work in SharePoint?
    Why does this formula...
    =IF([Request Type]="Review",(IF(ISBLANK([Request Date]),FALSE,TRUE)),TRUE)
    ...work in Excel but fail when I try to use it in SharePoint?
    The intent of this formula is the following...
    If the field "Request Type" has the value "Review" and the field "Request Data" is blank then show FALSE, otherwise show TRUE.
    SharePoint saves the formula, but when a list item is saved where the formula is implemented, (under List Settings, List Validation), SharePoint does not, say anything other than that the formula failed.
    Note that the "list data validation failed" error only happens when I am creating a new item-- the formula above works just fine when one is trying to Save on the edit form. 
    Can you help?
    Thanks.
    -- Mark Kamoski

    Dear Jason,
    I appreciate your efforts.
    However, it seems to me that this statement of yours is not correct...
    "If it meet the validation formula, then you can new or edit the item, otherwise, it will throw the 'list data validation failed' error, it is by design".
    I believe this is NOT the answer for the following reasons.
    When I create a new item and click Save, the validation error is "list data validation failed".
    When I edit an existing item and click Save, the validation error is "my custom error message" and this is, I believe, the way it needs to work each time.
    I think, at the core, the error my formula does not handle some condition of null or blank or other default value.
    I tried a forumla that casts the date back to a string, and then checked the string for a default value, but that did not work.
    I tried looking up the Correlation ID in the ULS when "list data validation failed" occurs, but that gave no useful information because, even though logging was set to Verbose, the stack trace in the error log was truncated and did not given any
    good details.
    However, it seems to me that SharePoint 2013 is not well-suited for complex validation rules, because...
    SharePoint 2013 list-level validation (NOT column-level validation) allows only 1 input for all the multi-field validation formulas in a given list-- so, if I had more than 1 multi-field validation rule to implement on a given list, it would need to be packed
    into that single-line-of-code forumla style, like Excel does. That is not practice to write, debug, or maintain.
    SharePoint 2013 list-level validation only allows 1 block of text for all such multi-field validation rules. So that will not work because I would have something like "Validation failed for one or more of the following reasons-- withdrawal cannot exceed
    available balance, date-of-birth cannot be after date-of-death,... etc". That will not work for me.
    The real and awesome solution would simply be enhancing SP 2013 so that column-level validation forumlas are able to reference other columns.
    But, for now, my workaround solution is to use JavaScript and jQuery, hook the onclick handler on the Save button, and that works good. The only problem, is that the jQuery validation rules run before any of the column-level rules created  with OOTB
    SP 2013. So, in some cases, there is an extra click for the enduser.
    Thanks,
    Mark Kamoski
    -- Mark Kamoski

  • Word label template does not line up with avery 5160 8160 paper, Mac Maverick

    Word label template does not line up using avery 5150 or 8160 paper

    These forums are for Apple products and the best place to ask about problems with MS stuff is in there newsgroups:
    http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups
    When you don't see Post New Topic, it means you are not in a Forum but a Category page listing one or more Forums. You need then to enter a Forum by clicking on one. Then you will see the Post New Topic item at the top left.

  • Template interpretation failed. Template does not exist.

    Hi Gurus,
    We are configuring SRM 7.0 ( SPS06) with ECC6 ( Ehp4) without Portal, but when I go to Webbrowser ( SiCF..BBPSTART service) and click on any function like Shop...the gives error 'Template interpretation failed. Template does not exist. " ....after going throug some threads we  added ~GENERATEDYNPRO' with value '1'u2026.in Service BBPSC02..etc...then system shows SAP GUI screen in the web Browser for Shop function for example...
    Since in the Config Guide. for SRM 7.0..To configure the portal-independent navigation frame...we need to define below steps..
    1. RFC connection of type H (HTTP) to the SAP ERP back-end system under SM59
    2.Enter the HTTP connection defined above, but without the suffix, in the Customizing activity Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
    3.Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business Client (NWBC) for HTML.......which is not defined yet....
    Can anyone please confirm me..whether I'm right or anything need to be corrected ...
    Thank you in advance.
    Regards
    Naren

    Thanks.
    Now I am able to see SRM web browser Screen w/O Portal ...its really nice compare to SRM5.0
    As per Config guide It happned after doing below steps .....
    SAP Supplier Relationship Management (SAP SRM) supports various flexible deployment variants.
    Note
    You can use the flexible deployment variants in SAP Supplier Relationship Management 7.0 (SAP
    SRM 7.0) on SAP enhancement package 1 for SAP NetWeaver 7.0 SPS06.
    3.1 Portal-Independent Navigation Frame and Inbox
    3.1.1 Portal-Independent Navigation Frame Configuration
    Using the Portal-independent navigation frame, you can use SAP Supplier Relationship Management
    (SAP SRM) applications without using SAP NetWeaver Portal.
    Procedure
    To configure the portal-independent navigation frame, proceed as follows:
    1.     In Customizing for SAP Supplier Relationship Management, define the following settings:
    n Activate the Portal-independent navigation frame in Customizing for SAP Supplier
    Relationship Management under SRM Server Technical Basic Settings Portal-Independent
    Navigation Frame Activate/Deactivate Portal-Independent Navigation Frame .
    n Define an RFC connection of type H (HTTP) to the SAP ERP back-end system under SRM
    Server Technical Basic Settings Define RFC Destinations , or use transaction SM59. The name of
    the connection must end with one of the following character sequences:
    l For a non-secure connection, use_HTTP.
    Example: SAP_ERP_HTTP.
    l For a secure connection, use _HTTPS.
    Example: SAP_ERP_HTTPS.
    n Enter the HTTP connection defined above, but without the suffix, in the Customizing activity
    Define System Landscape in the System Alias for POWL Navigation field. Enter, for example, SAP_ERP.
    n Activate the Internet Communication Framework (ICF) service /sap/bc/nwbc/srm in
    transaction HTTP Service Hierarchy Maintenance (SICF). Use this service to start NetWeaver Business
    Client (NWBC) for HTML.
    Thnaks

  • After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
    In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
    I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

  • Domain name does not link to index page.

    Having a lot of difficulty publishing to FTP, have researched many forums and unable to find answers. Whether I publish to FTP via iWeb or Cyberduck, my domain name danbaileymusic.com shows a 403 Forbidden Error. However if i type in danbaileymusic.com/index or /music, ect it loads. The whole site functions fine, but the domain name does not link to the index page.
    In Cyberduck all permissions have been turned on. Also I noticed that when publishing to a local folder, iWeb creates a folder "danbailey" and an index.html. This index page does not work in Cyberduck, however the index page that is WITHIN the folder "danbailey" does work, but it doesn't link to the domain name.
    Please help! I've been working on this for weeks and cannot figure out why the domain name is not working!

    It only creates the page names with first letter capitalized (as in Index not index) I have tried changing it from the sidebar and from the Page Name in the Inspector -- typing "index" comes back as "Index" It's easy enough to change the "I" to an" i" at the file level (which did fix the problem) but doing this also breaks all the links I have to "Index.html" Fixing this on the creation side would be ideal. Thoughts?
    I am using iWeb '09 v.3.0.1 if that makes a difference

  • My TOC in the epub document does not link to the chapters

    Hello!
    I created a document in pages that I am exporting as an ePub. When creating the TOC, I have ticked "make page numbers links". However, when I open the epub file, the TOC that appears in the document 1) does not show page numbers; 2) does not link to the chapters (or anywhere else).
    What is it that I'm doing wrong? Any help will be appreciated.
    Thank you!

    Try a restart of your entire system. Shut down both your modem and your router if they are two separate devices. Then restart each item one at a time with about three minutes between each device.
    Also reset the iPad by pressing and holding the Start and Home keys together, ignoring there'd slider until the Apple logo appears.

  • I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5

    I have moved my Photoshop CS5 to my traveling computer,a Surface Pro 3.  I have photoshop loaded but in trying to look at raw images it says my camera raw does not support the sony alpha 65 which is what I have.  I went out and tried to download the newest raw version and even went out and did a zipfile download and it will not update my current version.  What should I do

    I have 6.0.  Tried to download newest verion and it will not download.  Went out and then downloaded a zipfile and it still will not download, thus cannot look at my raw pictures.
    Thanks, John
    m: gener7 
    Sent: Thursday, December 11, 2014 6:01 PM
    To: JOHN STAHLY
    Subject:  I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    I have Adobe photoshop cs5. need to update camera raw, cause my camera raw is  2010and does not read my camera,  I went out and downloaded the new one and it does not link to adobe photoshop cs5
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/7007148#7007148>

  • Reader version listed in GUI does not match that of executable file (again)

    I posted regarding this issue before (http://forums.adobe.com/message/4817948), but was never able to find an answer.
    Presently I am deploying Adobe Reader 10.1.5 via the MSI installer and group policy. The issue is that a user shut down her Windows 7 computer midway though the MSI installation interrupting (i.e. screwing up) the installation process. I had to delete a few registry entries and reboot the user's PC in order to re-initiate the Reader installation (something I've done in the past).
    To verify that Reader was installed sucessfully, I browse to the Reader executable (AcroRd32.exe) in Program Files, double click the executable, select About Adobe from the Help menu, check the version number in the information box and see that the version number is 10.1.4 (i.e. the old version that I am upgrading from). However, when I browse to the Reader executable (AcroRd32.exe) in Program Files and and open the file properties, I see that the version is 10.1.5 (i.e. the new version that I am upgrading to).
    So the Reader version listed in GUI does not match that shown in the executable property box.
    This is the second time that this has happened with a Windows 7 PC. I've never experienced this sort of thing with a Windows XP PC.
    Why is the version number different in the GUI? Where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?

    Let me clarify that the tool posted on http://labs.adobe.com/downloads/acrobatcleaner.html is not the uninstaller for Reader. Instead it is a cleaner tool used for any botched up installation as mentioned above. This utility should only be used in rare circumstances. Instead reader has its own uninstaller which can be used through ARP (Add Remove Programs) in Windows or you can also use the command line "msiexec /x AcroRead.msi" to uninstall Reader.
    Thanks,
    Vinod

  • System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist

    Hi,
    I am facing with this problem. System.IO.FileNotFoundException: The file /_catalogs/masterpage/custom.master does not exist.
    I have reviewed in central admin. And my custom.masted is active.
    some idea?
    Patricia

    is that a custom solution you deployed ?
    look at your site collection master page gallery and verify if you have the master page .
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer

  • Support, please add a place for the Z30 and fix the "The specified template does not exist or is empty" error on this page

    Please get the web site designers to fix this forum.  There is no Z30 "place" and there is an error message that shows up every time.
    The specified template does not exist or is empty

    Make sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

    Hi All,
    Iam getting error message while creating intercompany sto PO in my QA clinet.
    (Customer PC3000 does not exist (please change entry in plant 3000)
    Vendor maintained both the plant(supply and receeving plant)
    Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
    I had checked OMGN t-code setting looks good.
    Same setting I had tested on DEV and SANDBOX its wokring fine.
    Please help me out how to solve this problem
    Thanks
    Raj K

    Hi,
    I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
    This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
    Regards,
    Onkar

  • HT201303 Why when I use my iPad apple does not link to my iPhone account

    Why account does not link to both apple devices

    Take a look at this link, http://support.apple.com/kb/TS1591

Maybe you are looking for

  • How do I remove crontab data I set up?

    Hi there, I recently edited my crontab so that my external hard drive would automatically mount and unmount once a night for backup purposes. I learnt how to do this from this site: http://hints.macworld.com/article.php?story=20070313192221659 Now I

  • Problem whit activateStateForUndo possible bug?

    I dont know if this is totally JHeadStart or BC. I use a table to edit items, it's also possible to delete items. If I have like 3 records in the table, I edit row 1 and 2 and mark row 3 to be deleted. If for whatever reason the commit fails because

  • 160GB Classic - Something went boom.

    I recently purchased an iPod Classic 160gb. Installed iTunes, connected the iPod, and everything set up perfectly. I disconnected and reconnected 4-5 times over the next couple of weeks for syncing and charging. (I followed the rules and disconnected

  • Transferring files from MacBook Pro hard drive to Time Capsule

    I recently bought a Time Capsule. I know I can use that as an external hard drive to save disc space on my MacBook Pro. How can I transfer files that are already on my MacBook Pro hard drive to the time capsule? For instance, I have videos of my daug

  • Can't connect to WebCenter Discussions server

    Hello, I configured the discussions server under the WebCenter section in the Enterprise Manager, but after restarting everything, I keep getting the following message: failure to authenticate the user weblogic, due to: Unexpected error occurred, due