LIS service and the subnets...

Hi,
I have a network:
10.0.242.0 with mask: 255.255.254.0. That means that available addresses on the subnet have from 10.0.242.1 to 10.0.243.255.
But when I try to add that subnet into LIS I could not get it work. When I took the trace on the server side I get this:
<GetLocationsRequest xmlns:...
<Entity>sip:[email protected]</Entity>
<RSSI>0</RSSI>
<MAC>11-22-33-44-55-66</MAC>
<SubnetID>10.0.242.0</SubnetID>
<IP>10.0.243.8</IP>
</GetLocationsRequest>]
<GetLocationsResponse xmlns:...
<ReturnCode>404</ReturnCode>
</GetLocationsResponse>]
Do I understand correctly, that even on the Lync's network configurations I can setup a subnet with valid mask for the location and CAC. But on the LIS service I have to use some other definations???
This is the IPConfig from the wks:
IPv4 Address. . . . . . . . . . . : 10.0.243.8
Subnet Mask . . . . . . . . . . . : 255.255.254.0
Default Gateway . . . . . . . . . : 10.0.242.1
Is there any way to get subnets to work where the mask is something else than "/24"?
Petri

Hi,
You can set LIS Subnet by the Lync Server cmdlet: Set-CsLisSubnet.
This cmdlet allows the administrator to map physical locations to the subnet through which the client is connected. If you enter a Subnet value that already exists, this cmdlet will update the loation for that subnet based on the location parameters that
are supplied. If the Subnet does not exist, a new subnet location will be created.
Please try to add all subnet where hosted clients and then test again.
Here is a similar case may help you:
https://social.technet.microsoft.com/forums/lync/en-US/18734076-e30d-4685-99d2-df9a231e29d5/configuring-location-information-lis-subnet
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

MDM web services and the MDM BP services

Hi *,
I need to know what is the difference between the standard MDM web services and the MDM BP services. How do I decide which set to use?
- Kris

Sorry but what are BP services? Do you mean Business package?
If yes the approaches are completely different - you use Web Services when you have to customise the application and build your logic/functionality into the app. CRUD operations are procided by Web Services - you need to form your wrapper application from scratch and develop!
With BP - it involves least development effort bearing in mind that its all standard content and not yet completely customizable. So based on your requirements plan whether to go for Business Package or Web Services or Java API completely...

If i bring mac in for service and the service is expred what do they charge me to look and give me an estimate

if i bring mac in for service and the service is expred what do they charge me to look and give me an estimate

There is no charge for diagnosis.

Poor service and the saga of the Home Hub 2.0

Since upgrading to Total broadband 3 earlier this year, I've had problems with the Home Hub 2.0 (type a). It keeps locking up/crashing. Its the home hub rather than the broadband connection, which when used with a Linksys modem router works fine.
I've run through usual fault finding and rectification - hard reset, plugging into test socket, countless line tests. of course trying to get BT call centre staff to understand its the home hub thats playing up/at fault, not the connection, is like banging ones head against a very hard wall. For a piece of equipment less than a year old it should work without problem. And I was tempted to go to PC world and buy a replacement modem, but decided to preserve with BT's 'help' desk.
Over the past 3 or 4 months I've probably made one help desk call about the same issue each month. Have to repeat myself time and time again and get fobbed off with another excuse, or promise of call back.
Eventually got through to a supervisor - after insisting when a call log was closed and marked 'resolved' when we were still having the problems and hadn't had a call back. Repeated my issues for the 4th or so time, went through what I had done to date (restore to factory settings, checking its logs, etc etc) he finally consented to send a replacement home hub.
I get an email telling me it would be delivered on the 6th before 6pm. But of course it wasn't. And I did as the email said, and tried to phone the number to say it hadn't arrived only to get an answer phone message saying the help desk was shut.
So wasted my lunch break today on the phone to BT trying to find out where it was, only to learn that BT had posted it to a previous address which I haven't lived at for 4 years. Well done BT, it takes real skill to be that rubbish.
Fingers crossed another new one is on its way to the right address.
I have however a couple of questions, which as I can't face phoning the call centre again I thought I'd post on here:
1) How on earth did BT manage to send the replacement home hub it to the wrong address? Especially since the original one was sent to the correct address & my delivery address is set correctly on the web portal and the agent handling the call confirmed the address? - and what are you going to do to ensure it doesn't happen again (dare I mention data protection - as the home hub pack presumably has some personal details on it..)
2) In the final call today I was asked for my date of birth and mothers maiden name so they could add it to the account - afterwards having not been asked by BT for this before on countless calls I wondered is this standard practice - or should I now be worried?
3) How do you have a sensible discussion with someone - preferably in the UK - about the customer experience? As mine as has been rubbish (you might be able to tell from the tone of this post), and I'm regretting ever having upgraded and wishing I had instead gone to another broadband provider.
4) Given that issues with certain models of home hubs seem to be known issues (at least to google) why do the call centre agents always focus on the broadband connection -(typical conversation with an Agent "..so your connection keeps dropping", Me: "No the connection is fine. The home hub has crashed again". Agent "So your connection has dropped"? and on and on) rather than actually listening to the customer. (Can you reset it - yes already have, several times and so on)
Any answers from a moderator would be welcome.
I am actually happy with BT's broadband product, and don't want to have to go through the hassle of changing provider, I'm just disgruntled at how bad the home hub has been, and how poor the customer service has been.
Thanks.

Hi EKandrew,
To be honest I have not heard of the hub locking up before. The questions you have been asked by our helpdesk are aimed specifically at your connection as most problems tend to occur here, either with slow speed or hub drops etc.
Could you be more specific in how the hub locks/crashes? What do you notice when this happens? What way do you have your connection set up?
As much info as possible would help
In answer to your questions:
1/ Sometimes we have an old address still on your account and this has not been updated for packages/correspondance.
2/ Nothing to worry about, we ask these questions for additional security. If you have quoted your account number previously this is normally enough for most things however the advisor probably just noticed we didnt have this info on file.
4/ As above, this is not a common problem and most issues that come to us are to do with your connection.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

BI cluster DOWN but the services and the admin server is all UP in OBIEE 11G.

Hi
Please suggest me some solution that if the BI cluster is DOWN and all the other components are all UP.Only the BI cluster and the Biserver_1 is DOWN under bicluster.so that the analytics is not working and showing in the Internet Explorer as "The Page Cannot be Displayed". But the EM and the Console are Working fine.

Some times it may happen because of the services if they are not started in order
./startNodeManager.sh
nohup ./startWeblogic.sh -Dweblogic.Management.username=username -Dweblogic.Management.password=password > AdminServerStart.log & tail -f AdminServerStart.log
nohup ./startManagedServer.sh bi_server1 -Dweblogic.Management.username=username -Dweblogic.Management.password=password>bi_serverstart.log & tail -f bi_serverstart.log
./opmnctl startall
Try this and let us know the out come.
Mark if helps,
Thanks,

ASMX web service and The remote server returned an error: (500) Internal Server Error issue

i have developed a very small web service and which is hosted along with our web site. our webservice url is
http://www.bba-reman.com/Search/SearchDataIndex.asmx
web service code
namespace WebSearchIndex
#region SearchDataIndex
/// <summary>
/// SearchDataIndex is web service which will call function exist in another library for part data indexing
/// </summary>
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
// [System.Web.Script.Services.ScriptService]
public class SearchDataIndex : System.Web.Services.WebService
//public AuthHeader ServiceAuth=null;
public class AuthHeader : SoapHeader
public string Username;
public string Password;
#region StartIndex
/// <summary>
/// this function will invoke CreateIndex function of SiteSearch module to reindex the data
/// </summary>
[WebMethod]
public string StartIndex(AuthHeader auth)
string strRetVal = "";
if (auth.Username == "Admin" && auth.Password == "Admin")
strRetVal = SiteSearch.CreateIndex(false);
else
SoapException se = new SoapException("Failed : Invalid credentials",
SoapException.ClientFaultCode,Context.Request.Url.AbsoluteUri,new Exception("Invalid credentials"));
throw se;
return strRetVal;
#endregion
#endregion
when i was calling that web service from my win apps using
HttpWebRequest
class then getting error The remote server returned an error: (500) Internal Server Error
here is code of my win apps from where i am calling web service
string strXml = "";
strXml = "<s:Envelope xmlns:s='http://schemas.xmlsoap.org/soap/envelope/'><s:Body><StartIndex xmlns='http://tempuri.org/' xmlns:i='http://www.w3.org/2001/XMLSchema-instance'><auth><Username>joy</Username><Password>joy</Password></auth></StartIndex></s:Body></s:Envelope>";
string url = "http://www.bba-reman.com/Search/SearchDataIndex.asmx";
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(url);
req.Method = "POST";
req.ContentType = "text/xml";
req.KeepAlive = false;
req.ContentLength = strXml.Length;
StreamWriter streamOut = new StreamWriter(req.GetRequestStream(), System.Text.Encoding.ASCII);
streamOut.Write(strXml);
streamOut.Close();
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
string strResponse = streamIn.ReadToEnd();
streamIn.Close();
i am just not being able to understand when this line execute
StreamReader streamIn = new StreamReader(req.GetResponse().GetResponseStream());
then getting the error The remote server returned an error: (500) Internal Server Error
not being able to understand where i made the mistake. mistake is in the code of web service end or in calling code?
help me to fix this issue. thanks

Hi Mou,
I just tried your win app code about calling web service, but failed. I got the 500 error after I called your service:
The error message I quoted from Fiddler:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>System.Web.Services.Protocols.SoapException: Failed : Invalid credentials ---> System.Exception: Invalid credentials
--- End of inner exception stack trace ---
at BBAReman.WebSearchIndex.SearchDataIndex.StartIndex(AuthHeader auth)</faultstring><faultactor>http://www.bba-reman.com/Search/SearchDataIndex.asmx</faultactor><detail /></soap:Fault></soap:Body></soap:Envelope>
I am not totally sure that error occurred by the authentication. But I suggest you can try to add this service into your project using this method below:
1.right click the Reference and select Add Service Reference
2.input your service link and click "Go"
And you can use this service as the following:
private async void callService()
ServiceReference1.SearchDataIndexSoapClient client =new ServiceReference1.SearchDataIndexSoapClient();
var Str= await client.StartIndexAsync(new ServiceReference1.AuthHeader { Username = "Admin", Password = "Admin" });
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What exactly do the national instruments citadel nt service and the lookout citadel nt service run

We have WhatsUp monitoring software set to monitor NI Lookout and the PC it is on. It pings the PC, and polls the Lookout Citadel Server NT service. If either one fails, WhatsUp sends an email notification. I was under the impression if the Lookout Citadel Server service is down, then NI Lookout won't graph or record data, but that's not the case. If I shut Lookout Citadel Server or National Instruments Citadel Server down, NI Lookout still graphs and records. What exactly do these two services run?
Also, is there a possibility that NI Lookout can be viewed through palm OS software, like a Blackberry?

Lookout Citadel Server is for Citadel 4, which is used by Lookout 5 and DSC 7.
NI Citadel is for Citadel 5, used by Lookout 6 and DSC 8.
If Citadel is stopped, Lookout will start it up automatically when launched. But if Citadel is stopped when Lookout is running, there might be some unexpected issues, although the data logging seems to be working well.
So I strongely recommend you not to stop those Citadel service when Lookout is running.
Lookout cannot be running on palm OS.
Ryan Shi
National Instruments

Web Services and the Portal

Are there any versions of the portal that have native support for communications to Web Services? Is it going to be eventually possible to dynamically discover channels via a discovery method like UDDI?

Currently no, in the next release we have preliminary support for web services and there might be web services provider but eventually no time frame yet we do plan to support UDDI ..

Content Enrichment Service and the Crawl Log

Hi,
I am wondering if there's a possibility to inject custom error details from the content enrichment service into the crawl log? If an item fails processing in the CEWS the crawl log shows
The item failed due to an error occurring when sending or receiving data to the external content processing
enrichment web service.
I would like to place my own custom error message depending on what went wrong during CEWS processing. How Can I do that?

If you look in the ULS logs you should see something like this:
Flows: [Microsoft.CrawlerFlow-6de14b76-2720-4b71-8dc9-3a06eb04f1f5] Evaluation Error: ContentProcessingEnrichmentClientEvaluator Microsoft.Ceres.Evaluation.DataModel.EvaluationException: The content processing enrichment service returned error code 9.
Where in this case I sent back the error code of '9' via the ProcessedItem.ErrorCode, you need to send back different error codes depending on what went wrong in your CEWS. You define what the codes mean.
See http://msdn.microsoft.com/en-us/library/microsoft.office.server.search.contentprocessingenrichment.processeditem.errorcode.aspx
Gets or sets an optional error Id. It is up to the implementer to define errors. The default value of is 0, meaning no error.
I don't think you can send a message back, just an error code:
http://msdn.microsoft.com/en-us/library/microsoft.office.server.search.contentprocessingenrichment.processeditem_members.aspx
In the crawl logs I don't even see this error code!, all I see are these:
The item failed due to an error occurring when sending or receiving data to the external content processing enrichment web service. ( Failed to process the results returned by the content processing enrichment service.; ; SearchID = 7FB263D8-5B9B-446E-A140-78B07CC77B00
What I recommend you instead do is catch exception messages in your code and log them some other way...

_sip service and the _tls protocol

Hi
My client is switching his email to MS 360 and we host his DNS. He is asking for and SRV record using _tls protocol. I can only use TCP or UDP in my control panel. Is there a work around?

You should create all the required DNS records (as per below) for correct operation.
TYPE
SERVICE
PROTOCOL
PORT
WEIGHT
PRIORITY
TTL
NAME
TARGET
SRV
_sip
_tls
443
1
100
1 Hour
domain.com
sipdir.online.lync.com
SRV
_sipfederationtls
_tcp
5061
1
100
1 Hour
domain.com
sipfed.online.lync.com
CNAME
sip.domain.com
sipdir.online.lync.com
1 Hour
CNAME
lyncdiscover.domain.com
webdir.online.lync.com
1 Hour
You can TRY and omit the _sip._tls record to see if it does work as the Lync 2013 client will attempt to look up the server in the following order:
lyncdiscoverinternal.<domain>   A (host) record for the Autodiscover service on the internal Web services
lyncdiscover.<domain>   A (host) record for the Autodiscover service on the external Web services
_sipinternaltls._tcp.<domain>   SRV (service locator) record for internal TLS connections
_sipinternal._tcp.<domain>   SRV (service locator) record for internal TCP connections (performed only if TCP is allowed)
_sip._tls.<domain>   SRV (service locator) record for external TLS connections
sipinternal.<domain>   A (host) record for the Front End pool or Director, resolvable only on the internal network
sip.<domain>   A (host) record for the Front End pool or Director on the internal network, or the Access Edge service when the client is external
sipexternal.<domain>   A (host) record for the Access Edge service when the client is external
So it should be able to determine how to login using the lyncdiscover CNAME, however, you should ideally have the record created.
You can see more information here:
http://technet.microsoft.com/en-us/library/gg398758.aspx
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer" | Blog
www.lynced.com.au | Twitter
@imlynced

Web Services and the Developer Mindset

"Web Services has all the makings of a home run. As a powerful integration platform, it moves the procedural-heavy complexities of building distributed apps into the realm of simple declarative transactions, while supporting location transparency. It is a powerful that removes the barriers erected by the discontinuity of geographic distance and cross-platform technical mismatches that have until now constrained the plumbing between heterogeneous networked applications.
Developers who feel lost in the labyrinth of hype they can turn to a new site http://www.webservicesfaq.com devoted to UDDI, WSDL,SOAP, ebXML, and so on.
Here they'll learn how, while Web Services complements J2EE superbly, it is also an excellent integration platform for .NET technologies, and in fact for the transparent interoperability between the two, and between any other architectures that support the new Web Services standards.

What is your question?

Photo printing services and the ProPhotoRGB profile?

I recently tried to have some images printed by Adorama here in NYC and they came back washed out and brownish. I eventually deduced that the issue was that the photos had an embedded ProphotoRGB color profile and that Adorama couldn't handle it or convert it to something that would work.
Does anyone have any suggestions for online printing services that can manage this color space and give me really nice prints?
I've just uploaded the same files to Mpix to see how they manage - anyone have any experience with Mpix? How about Nations Photo Lab?
Any other suggestions would be appreciated.
Also - what is the best workflow for converting ProPhotoRGB color space to another color space? I tried converting it to Adobe RGB and it looks crap.
Thanks

Both Mpix and WHCC, among others, support a fully color-managed workflow
that allow you to embed a standard RGB working space profile like ProPhoto.
Exactly how did you perform a conversion to Adobe RGB, and how did you view
the image after performing the conversion?
Eric
I recently tried to have some images printed by Adorama here in NYC and they
came back washed out and brownish. I eventually deduced that the issue was
that the photos had an embedded ProphotoRGB color profile and that Adorama
couldn't handle it or convert it to something that would work.
Does anyone have any suggestions for online printing services that can manage
this color space and give me really nice prints?
I've just uploaded the same files to Mpix to see how they manage - anyone have
any experience with Mpix? How about Nations Photo Lab?
Any other suggestions would be appreciated.
Also - what is the best workflow for converting ProPhotoRGB color space to
another color space? I tried converting it to Adobe RGB and it looks crap.

Repository service and the PRE_DELETE Event

Hello,
I have implemented a repository service which is reacting on the PRE_DELETE event. I want to develop a recycle bin functionality.
The problem is that the resource is already deleted when I get the PRE_DELETE event and I can't move or copy the resource any more.
Is there a possibility to access the resource? Or another event?
Thanks
David

Hi Rui,
I was thinking about the solution with the new delete command but my problem is to secure that I have changed the delete command in all necessary layout sets ( Search Result, Favorits, all navigation iViews and so on). And also to secure that I don't have to change system iViews or system layout sets. Tips to secure the changes are really appreciated.
Has some one experiences with the PRE_DELETE or the DELETE Event?
Thanks
David

Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before. Has Microsoft taken over Apple software?

SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.

Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done...

LIS service and the subnets...

Similar Messages

Maybe you are looking for