List box in BDC

Hi,
I am have done bdc recording for vpa1 transaction. It has few list boxes like marital status , gender etc.
marital status will have the values Single, Married , Divorce. If i would like to select Single or Married what kind of data i need to pass from legacy file in order to select marital status as Married or single etc.
Please help me.
Thanks,
Ahmed.

Hi,
Just check in SAP table...
example
take existing record for MALE..check in table...it should be like 1 or 2 or 3...OR X, ...l
Pass the value into your BDC table.
Regards,
Ramesh.

Similar Messages

How to find list box field from recording

Dear All,
My requirement is to close all POs whose delivery date is overdue by 6 months. this can be accomplished by setting the delivery indicator in ME22N. I want to do this by BDC.
I have the list of all purchase doc numbers and item numbers whose delivery date satisfies the condition given.
Through Recording I want to find the fields getting effected. The delivery inidcator has to be set automatically by choosing the appropriate item from the dropdown list box. Choosing th eitem from dropdon list box was not found by me. Can anybody help me in this regard? Its very urgent. Thanks in advance

Hi,
Here is the sample code.
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
       list TYPE vrm_values,
       value LIKE LINE OF list.
PARAMETERS: ps_parm(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION-SCREEN OUTPUT.
name = 'PS_PARM'.
value-key = 'Line 1'.
value-text = 'Line 1'.
APPEND value TO list.
value-key = 'Line 2'.
value-text = 'Line 2'.
APPEND value TO list.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING id     = name
              values = list.
START-OF-SELECTION.
WRITE: / 'Parameter selected in List box:', ps_parm.
Kindly reward points if it helps.

Reg: Drop-Down list Box not displaying values

Hi Experts,
i am publishing a module pool program in the internet using SICF Transaction . In the internet my drop down list box is not displaying the default value but in my sap it works fine .
What may be the problem?
Regards,
Vikram

Hello Thorsten Domsalla ,
My Problem is in my sap module pool program there is a drop down list box which disaplays default values its working fine in sap gui but when i access through internet (SICF) Transaction the Drop down list box not listing out default values .
i am using Integrated ITS Version 7.0 and Support package 08.
Regards,
Vikram

Getting multiple values from a list box

Hi,
I am not able to get multiple selected values from a list box using the getParameterValues(). I used the following code..
String[] names=request.getParameterValues("lname");
can anyone tell me what the error is or is there any other way i can get multiple selected values from a list box.
Thanks
Satish

Fragment 1
This is the JSP Code am using for testing
<%
String[] name =request.getParameterValues("D1");
if(name.length==1)
String value=name[0];
Instead of name.lenght==1 try with name!=null
Fragment 2
out.println(value);
replace the above fragment with
%>
<%-- print result -->
<%=name[0]%>
<%
Fragment 3
else
%>
The list box D1 is a multiple select list box.
If it still doesn't work, check that the checkboxes have the same name as well as different values
<input type="checkbox" name="D1" value="1">
<input type="checkbox" name="D1" value="2">I hope this helps :-)
Good luck
touco
ps: i want duke

How to capture the selected values from module pool dialog list box !

Hi experts,
Can anyone help me out in capturing the values from the list box.
i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
Your inputs are appreciated.
Thanks,
Vijay.

Along with the PBO and PAI event, add a POV event in the flow logic of the screen
DEMO_DROPDOWN_LIST_BOX -is a good demo example.
PROCESS ON VALUE-REQUEST.
FIELD structure_name-field_name MODULE create_dropdown_box.
In the report :
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
sdyb_conn-carrid will contain your selected field

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

How to get the selected value/key of a drop down list box in webdynpro Java

Dear SDN Members,
I have added some static data into a drop down list box by key UI element using the procedure specified in value help tutorial.
Now i want to display the value selected in a dropdown list box on view whenever i select an item in a dropdown list box.
Can any one put here the code part relating to this.
Your help will be awarded.
Thanks in advance,
Regards,
Sireesha.B

Hi Sireesha,
You want to display value based on the key selected in dropdown list. If you want to do like that
1) Create a context attribute for ex: key_value
2)In the properties of the attribute select the calculated as true.
3)It will create getter and setter methods for your attribute.
4)Go to implementation add the following code in getter method of your attribute
String attributeName = IPrivateCreate.IContextElement.KEY;
//KEY is your dropdown key attribute not the value attribute.
IWDAttributeInfo attributeInfo = element.node().getNodeInfo().getAttribute(attributeName);
ISimpleTypeModifiable simpleType = attributeInfo.getModifiableSimpleType();
IModifiableSimpleValueSet valueset = simpleType.getSVServices().getModifiableSimpleValueSet();
Object key = element.getAttributeAsText(attributeName);
return valueset.getText(key);
Regards
Suresh

Getting values from list box

i am populating a list box with Id's and names from a database and im trying to get the values from the list box depending what the user chooses, i.e if they choose the first choice in the list box the value i want to put in a variable is 1, etc
here is the code for the list box, please help
<select name="lstFilm" size="1">
          <%while (result4.next())
               {%>
<option value="<%result4.getInt(1);%>">
<%out.println(result4.getString(2));%>
</option>
               <%}%>
</select>

String[] lstFilm = request.getParameterValues("lstFilm");
Of course, it'll only return selected values. It'll be whatever the option values are.

Add List box for one field in ALV GRID

Hi All,
I need to add drop down list box for one field in ALV Grid.
If any body knows, please help.
Thanks in advance.
Regards
Manglesh

Hi,
Here is the ex where i have used for date parameter in the sel screen
type-pools: vrm.
data: name type vrm_id,
      list type vrm_values,
      value like line of list.
parameters :    p_date like p_date2
                              as listbox visible length 15.
at selection-screen output.
name = 'P_DATE'.
value-key = '1'.
value-text = 'Today'.
append value to list.
value-key = '2'.
value-text = 'Last 7 days'.
append value to list.
value-key = '3'.
value-text = 'Last 30 days'.
append value to list.
value-key = '4'.
value-text = 'Last 90 days'.
append value to list.
value-key = '5'.
value-text = 'Last year'.
append value to list.
Call the ''VRM_SET_VALUES' to display the values in Listbox
call function 'VRM_SET_VALUES'
    exporting
      id     = name
      values = list.
at selection-screen.
if sy-ucomm = 'CLI1'.
    sscrfields-ucomm = 'ONLI'(001).
endif.
if p_date = '1'.
    p_date11 = sy-datum .
elseif p_date = '2'.
    p_date11 = ( sy-datum - 7 ).
elseif p_date = '3'.
    p_date11 = ( sy-datum - 30 ).
elseif p_date = '4'.
    p_date11 = ( sy-datum - 90 ).
elseif p_date = '5'.
    p_date11 = ( sy-datum - 365 ).
endif.
Hope this helps u..
Please reward points if useful.
Regards,
Sreenivas

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

How do I use a drop-down list to populate a list box

I'm using livecycle 8:
I basically have a drop down list with many selections available. I want the function to be when they select from the drop-down the choice they made appears in a list box next to the drop-down box. If they choose to add additional selections from the drop-down list they will add to the list field as well. If anyone has seen one of those on-line job application sites where you have a list of qualities on the left and you can select them and they populate to a list on the right, That is basically what I want.
I'm not too familiar with adobe quite yet and if you can break the process down as much as possible I would greatly appreciate it.

Here are my two drop down lists. As you can see I build the second list dynamically based off the value of the year. I want to be able to assign my year to the value I select in this first drop down. How do I do that?? I only want to show games for the year I select. I currently have the year hardcoded to "2009" as you see below. How can i change that to be assigned to the JavaScript value i extract from the first select box?
<select name="season">
<option value='2009' selected>2009</option>
<option value='2008'>2008</option>
</select>
<select name="gameselect">
<%
try
String year = "2009";
String connectionURL = "jdbc:mysql://localhost:3306/ElmwoodExpos";
Class.forName("com.mysql.jdbc.Driver");
Connection con = DriverManager.getConnection(connectionURL, "root", "thejedster");
String sql = "SELECT GameId, GameDescription FROM Games WHERE Year = " + year;
Statement s = con.createStatement();
s.executeQuery(sql);
ResultSet rs = s.getResultSet();
while(rs.next())
%>
<option value="1"><% out.print(rs.getString("GameDescription"));%></option>
<%
catch(Exception e)
%>
</select>
Thanks,
Jed

SetSelectedValue for multiple values in List Box

Hi,
I want to set the selectedValue for multiple values in the List Box. If i use setSelectedValue for all the values, it just highlights the last one.
Can anyone tell me how do i highlight multiple values in the List Box?
Scenario:
I have one screen where the List Box and "Go" button is placed. When i select multiple values in the list box and hit "Go" it should display what i have selected in the List Box.
Note: List Box is generated dynamically.
Thanks,
Naresh V

setSelectedValue as the name indicates will set one value and in your case since you are using it multiple times it would pick the last value.
When the user selects multiple values from the list box and clicks on Go you can capture those values in the controller for processing. What are you trying to achieve by resetting all the selected values on the same listbox ?

How do you add a multiple entries at once to a drop-down list box?

I'm making a form for students to fill out and I want them to be able to pick from about 200 different courses. In the Field/List Items place, it would appear that you can only enter one item one at a time. I did this for 56 faculty,which took too much time, but for over 200 course titles, it would be much more convenient just to copy/paste them from an Excel spreadsheet, which is what I've tried doing. Any help or tips would be appreciated. I've attached a PDF of what I'm working on. The drop-down box is the one next to "Course." Thanks.

Hi,
The next version of LiveCycle Designer ES2 will allow user to copy and paste a long list of items into a dropdown or list box at design time. But until then your choices are limited.
Paste them one at a time;
You could set up a global variable in the (File/Form Properties) with the 200 items in the one variable. Then it would depend if your users have Acrobat/Reader v9 or earlier versions of Acrobat/Reader. John Brinkman has (several) blogs on this topic: http://blogs.adobe.com/formfeed/2009/01/populating_list_boxes.html
If you are going with v9 then you can use the setItem script. However if you want your form to be compatible with earlier versions then you will need the addItem script.
Also check out a sample by Steve Walker. http://forums.adobe.com/message/1939873#1939873 and http://forums.adobe.com/message/2038932#2038932 The first one dealt with adding user entered data onto a dropdown, which is not exactly what you are after, but it will give you direction in populating a dropdown from an array.
You would place the script in the docReady event of the dropdown, which would populate the dropdown every time the form is opened.
Good luck,
Niall

How to select the contents in a select list box....

I want to look into a select list box and check whether something is existing if exists print that or add a new one...I want to count the number in the select list box....the selected lsit consists of string of names....i have to choose my favourite name ...if present....
Please help me...

Akrisha wrote:
HTML List box ....in java script....This is Java forum.
In JavaScript you should use select.options[index] blah blah ...

How to hold the value in List box.

Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
Rakesh

Hi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
      if list[] is initial.
      perform SHP_COND.
      endif.
form SHP_COND .
*DATA: SHOP(80).
    clear : GT_VSBED, list.
    refresh : GT_VSBED, list.
     select vsbed
       from knvv AS K
       into table GT_VSBED
      where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
      and K~vtweg = vbak-vtweg
      and K~spart = vbak-spart.
    select VSBED vtext
      from TVSBT
    into table list
    for all entries in GT_VSBED
    where spras = sy-langu
    and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id                    = NAME
    values                = LIST[]
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " SHP_COND
Thanks,
Rakesh

List box in BDC

Similar Messages

Maybe you are looking for