List Box Problem

Hello Sir,
The Problem that I am facing is not difficult but
Confusing.
In my First Jsp Page I have 2 Select boxes(Combo Boxes
or U may Call List Box).
I have Allowed Multiselect.
the Second List Box is Empty.The person is allowed to
Select what ever he wishes from the First Select Box
to the Second List Box.
Now after Selecting all his Options when he Submits
his form the request is Delegated to another JSP.
The Problem that I am facing is that I want all the
item's that
Are Present in the Second Lsit Box.
How do I get all the (Items)values that are present in
that List Box.
With Request.getParameterValues()
I can only get what all items are Selected in the
Second List box but I need all the (Items)values that
present in the List Box.
Please Could Some One help me out.
very Urgent
With Regards
EklavyaThere are 2 ways you could do this, I can think of. First, instead of using a select box for the second select box, you could use a textarea where the options from the first select box is transferred to. You would then access the values with request.getParameter("textareaName");.
Or, you could have javascript code to loop through all of the options in the second select box, and create a string (possibly delimited by a space) upon submitting the form. Before you submit the form with Javascript, you would set a hidden field in the form to the string that was created with Javascript, and access the string with request.getParameter("hiddenfieldName"); Hope this helps.

Similar Messages

List Box Problem In MODULE POOL PROGRAM(EDIT MODE)

I Have Developed A MODULE POOL PROGRAM ,
It Basically Consists Of CREATE EDIT and DISPLAY Modes.
CREATE MODE:
When I am Creating For Example FORM NO 1,it is having Fields With drop down list box with values
A,B and C. if I Choose A then That form will Get Created With A value and Form 1 will be created.
EDIT MODE:
The same form If u want to edit In EDIT Mode ,it is displaying value A and it Showing the list box in the fillowing Manner.A,B,C,and A.(This is what the problem I am Facing Know).It Is Displaying the value two times.How to Avoid this ,PLs Help me in this regard.
Thaks & Regards,
Anuradha.

Where ever you are populating the List Box, write a REFRESH statement just before that.
Means Refresh the old content and add new content

List box problem in table control

Hi,
I have 3 list box coloum in my table control.Based on the 1st list box selection i wanna fill the 2nd list box.
I used function code 'CUS' and made the Fct type <BLANK> but my problem is fuction code triggers PAI but i am not getting the values what i slected in the 1st list box.
Please help me.
Regards,
Karthik.

Actually i resolved the problem the problem was with the function module...instead of VRM_SET_VALUES i tried F4_help...

HOw to add list box using enhacement of standard infotype

Hi,
Using enahancement infotype, I wanted to add a list box field in inftyp 01.
The module pool ZP000100 & screen no 200 already existed .In the layout editor the field didnot get displayed hence I took it from dictionary.
I have adde the code in pbo & pai for adding values in list box.
problem is that data is not getting saved when i enter data in pa30 inftyp 01.
Kindly guide me.
Regards,
Rachel

*

Problem when creating list box in table control

Hi every body ,
                  I am placing a list box in table control , the list box is coming perfectly but
when I am scrolling or pressing enter the data in that field is clearing.
   if I remove the list box , and i enter the data directly and scrolling or press enter
the data is not clearing.
But only for list box only it is be having like that
what is the problem?
the code is as follows
*{   INSERT         DEVK935807                                        1
*&      Module glaccuontlist INPUT
      text
module glaccuontlist input.
type-pools vrm.
tables: zglaccount.
data:
        name type vrm_id,
        list type vrm_values,
        value like line of list.
       clear:value.
       refresh: list.
        name = 'ACGL_ITEM-HKONT'.
        select * from zglaccount.
         value-key = sy-dbcnt.
         value-text = zglaccount-hkont.
         append value to list.
         clear value.
        endselect.
      call function 'VRM_SET_VALUES'
        exporting
          id                    = name
          values                = list
      EXCEPTIONS
        ID_ILLEGAL_NAME       = 1
        OTHERS                = 2
      if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
endmodule.                 " glaccuontlist INPUT
*}   INSERT
thanks in advance.\
srinivas.

Hi srinivasa,
try it.
select * from zglaccount.
<b>value-key = zglaccount-hkont.</b>
value-text = zglaccount-hkont.
append value to list.
clear value.
endselect.
Regards
Allan Cristian

Problem in picking up the value from list box

Hi,
I have created a parameter list box on the selection screen using VRM_SET_VALUES fn module and populating the list box. Now my problem is when i select one value from the list box and executing, it shows null value.
AT SELECTION-SCREEN OUTPUT.
PERFORM f_f4help.
FORM f_f4help .
REFRESH: gt_tvaut,
           gs_list.
CLEAR: gs_tvau,
         gs_value.
SELECT spras
        augru
        bezei
    FROM tvaut
    INTO TABLE gt_tvaut
    WHERE spras EQ sy-langu.
IF NOT gt_tvaut[] IS INITIAL.
    LOOP AT gt_tvaut INTO gs_tvau.
      gs_value-key = sy-tabix.
      CONCATENATE gs_tvau-augru
                  gs_tvau-bezei
             INTO gs_value-text
        SEPARATED BY space.
      APPEND gs_value TO gs_list.
    ENDLOOP.
ENDIF.
param = 'P_AUGRU'.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = param
      values          = gs_list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
How to get the value which is selected in the selection screen becoz i'm using p_augru in further selection queries..
i have tried reading gs_list table but its not working.

Move the portion of function call 'VRM_SET_VALUES' to event at selection-screen on value-request for P_AUGRU. Rest is OK...
I mean, Your code should be like this.
AT SELECTION-SCREEN OUTPUT.
PERFORM f_f4help_values.
FORM f_f4help_values.
REFRESH: gt_tvaut,
         gs_list.
CLEAR: gs_tvau,
       gs_value.
SELECT spras
       augru
       bezei
       FROM tvaut
       INTO TABLE gt_tvaut
       WHERE spras EQ sy-langu.
IF NOT gt_tvaut[] IS INITIAL.
LOOP AT gt_tvaut INTO gs_tvau.
    gs_value-key = sy-tabix.
    CONCATENATE gs_tvau-augru
                gs_tvau-bezei
           INTO gs_value-text
    SEPARATED BY space.
    APPEND gs_value TO gs_list.
ENDLOOP.
ENDIF.
ENDFORM.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_AUGRU.
PERFORM f_f4help.
FORM f_f4help
param = 'P_AUGRU'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id              = param
    values          = gs_list
EXCEPTIONS
    id_illegal_name = 1
    OTHERS          = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
Rgds,
Birendra

Problem with list box in table control (Module pool) .

Hi,
I'm facing a problem while populating values in List Box..
While I'm clicking a value from the list box it is not being hold in that box...box got blanked.
Please help me to solve this.

process before output.
module pop_drop_down.
module pop_drop_down output.
name1 = 'IO5'.
REFRESH list1.
LOOP AT it_zpoitshead INTO wa_zpoitshead.
    value1-key = wa_zpoitshead-createdt.
    value1-key = wa_zpoitshead-its_ebeln.
    APPEND value1 to list1.
ENDLOOP.
CLEAR value1.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id                    = name1
      values                = list1
   EXCEPTIONS
     ID_ILLEGAL_NAME       = 1
     OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.                 " pop_drop_down OUTPUT

Problem in using the list box

hi,
i have developed a dynamic list box, in html using java script.i have taken two list boxes. the values of second list box depends on the value selected in the first list box. after selection i was moving to the next page,then after i was moving back to original page, then the value of the second list box is changing.so how to retain the value of the second list box.
Help ASAP,
thank you,bbye

Either store it in the session scope, or pass it as a (hidden?) parameter along the request.

Multiple Selection List Box-- Data Reporting Problem...

I want to build a form which reports all of the multiple selections made by users from a list box. When I test the form, only the first selection is reported in the dataset. How do I configure the form so that when data is compiled, each of the selections from the list box is reported in sequence?

Here is the solution for the requirement.
Add another 2 columns in the resource list: test1 (set default value to 1), test2 (no default value).
Set test1 to 1 for all existing items in the resource list.
Set test2 to 2 for the 10 special items.
Custom form from InfoPath Designer, modify the data connection and also include the test1 and test2.
Go to drop down control properties and make sure its value is 1 and 2.
Go add the filter to multiple selection box control like this.
Note: field1 is the field used by my drop down control in Main data connection.
7. Done. Now when we select test1 in drop down, we can see all list items in multiple selection box. And when we select test2 in drop down, we can see the 10 list items that with test2 column filled with 2.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Reg: Drop-Down list Box not displaying values

Hi Experts,
i am publishing a module pool program in the internet using SICF Transaction . In the internet my drop down list box is not displaying the default value but in my sap it works fine .
What may be the problem?
Regards,
Vikram

Hello Thorsten Domsalla ,
My Problem is in my sap module pool program there is a drop down list box which disaplays default values its working fine in sap gui but when i access through internet (SICF) Transaction the Drop down list box not listing out default values .
i am using Integrated ITS Version 7.0 and Support package 08.
Regards,
Vikram

How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

Hi, I'm using SP13 and InfoPath2013.
I created a custom form and published it to SP13 document library. This form has many MSLB. Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show. Each MSLB is in its own section. The requirement
is to have each MSLB to have at least one checkbox selected. Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected. However, the form can't get submitted instead
an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed. Is there any way to fix this besides unchecking all MSLB to be not required at least one selection? Thank you.

Eric,
I follow your reply post here and still doesn't work. I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.
Here is what I did,
1.Check At least one selection required for
these Multiple-selection List Boxes
as you want .
2.Create a Formatting rule for the 2nd
Multiple-selection List Box.
3.Add a Condition as below:
4. I get a validation error if I don't
select at least one checkbox in the hidden MSLB control when submitting.
I think I'm following all the steps correctly
but please let me know if I'm not.

How to hold the value in List box.

Hi All,
On my screen painter Screen I am displaying the Sold to party and ship to party with thier address.
I am also displaying the Shipping condition based on ship to party. To display the shipping condition i am using list box. Once the user enter the sold to party automatically all the field is going to populate in their respective fields. I am facing the problem that, The list box getting populated with shipping condition but once you choose the shipping condition and hit the enter the list box getting refreshed. I am using this code in PAI event. And I can Only use this in PAI.
The Function i am using for list box is CALL FUNCTION 'VRM_SET_VALUES'.
Pls suggest me how to hold the value in List box.
Thanks,
Rakesh

Hi,
Now i am using in PBO.
the code below in in PBO.It is still not holding the value.
      if list[] is initial.
      perform SHP_COND.
      endif.
form SHP_COND .
*DATA: SHOP(80).
    clear : GT_VSBED, list.
    refresh : GT_VSBED, list.
     select vsbed
       from knvv AS K
       into table GT_VSBED
      where Kvkorg = vbak-vkorg "Kkunnr = GV_STPH
      and K~vtweg = vbak-vtweg
      and K~spart = vbak-spart.
    select VSBED vtext
      from TVSBT
    into table list
    for all entries in GT_VSBED
    where spras = sy-langu
    and vsbed = GT_VSBED-VSBED.
*break-point.
NAME = 'SHP_CON'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
    id                    = NAME
    values                = LIST[]
EXCEPTIONS
   ID_ILLEGAL_NAME       = 1
   OTHERS                = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " SHP_COND
Thanks,
Rakesh

IS there a way to fix the issue with text list boxes where they shift (empty space is smaller than the text size) when two text lsit boxes are side by side?

Currently I have a webpage I designed for a company where I have multiple text list boxes side by side for the purpose of displaying data in each one based on a category in the database. So a text list box for the primary key, name, serial number, etc. I have to use Firefox as it typically works best for printing and functionality for the page. The single issue we are having is that in Firefox if the field is null as far as text the text are shrinks meaning all the data in that list box shifts up and is no longer in line with its congruent data in the other text list boxes. In other browsers that's not a problem and everything stays lined up regardless of whether there's text in the box or not.
Unfortunately I cannot provide a link but if contacted I will provide screen shots.

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

Long List of Problems and no one will help!!!

I have had NOTHING but problems with this phone since the sales clerk talked me into buying it. I've had it for a little over a year and a half. It's had "Software" issues out the rear and it's been replaced and still has the very same issues. YET I can't swap it out with another phone without paying through the nose for a new one. Verizon sold me a phone that does not work completely. Verizon keeps replacing it with the same phone and numerous Verizon employees keep telling me that this phone has MANY known issues, LOTS of complaints. Yet I am still stuck with a phone that is barely useable. I am so disgusted right now.
Here is just a SMALL sampling of issues with my phone and I am still being denied a new phone unless I want to pay $600. I have 4 weeks until I can "Upgrade" and I still can't even get an early upgrade. I have been VERY patient waiting for my "TWO YEARS" to be "UP" so I can upgrade without being robbed. This in addition to suffering through the Black Berry Storm that SUCKED and was replaced 7 times in a year and a half period due to "Software issues" I will admit, two of those replacements were my fault - one got wet and the other was stolen, but still, 5 replacements is not acceptable. Then I went to buy my new phone (Glory day for me) then I get talked into this Fascinate and it's just as bad as the Storm was, if not worse. I can't seem to win. I have decided to go for an iPhone.
Here is my list of problems and NO one can fix them, no one can help, I get told that this is a known problem yet Verizon won't take care of their customers that got screwed by this phone. I've been a loyal customer for 7 years. I love the actual cellular service, I rarely get dropped calls, which is why I stick with verizon, but I am seriously considering jumping ship, because even though I'm loyal, I buy my phones through them, I can't get support.
The SHORT LIST of problems that makes this phone 100% unacceptable:
1) Can't text 3/4 of the time because a little grey box pops up in the text box and it won't accept anything I type into it.
2) Have not been able to send picture emails for several months now - Verizon can't figure out why. My husband misses out on a lot of pics of our kids, I like to text him fun pics of them doing things or when we are on vacation without him.
3) phone freezes up on a regular basis. Several times a day. I have to pull the battery out and reboot.
4) Sometimes I can't answer the phone when it rings - the phone rings and when I slide the puzzle piece to answer the phone, it freezes and continues to ring long after the person has hung up and the only way to get it to stop ringing is to pull the battery out and reboot the whole thing.
5) a LOT of times, people will call my phone and it won't ring - it goes straight to voicemail. I have had people call me when they are sitting right next to me and it doesn't ring (and yes, I've checked the volume, it's on, the phone is on) sometimes though, it rings and I actually can answer it, but lately, it's becoming more and more of a problem being able to receive and actually be able to answer them
6) I can't use Facebook. It takes forever to actually get into FB and when I do, it only shows about 5 posts before it freezes. A few weeks ago, I could post to FB but only here and there, now I can't post from FB from my phone at all. I know that's likely due to the APP - but FB on this phone has always sucked.
7) At home, even when I standing next to my wireless router, it says I have "Lost Signal", yet all of my other wireless devices work from 5400 square feet away, on the other side of the house, upstairs. Even when I'm standing in the Verizon store, it says "Internet Connection Lost" It is so frustrating. I am a busy mom and I have 5 minuts to myself and I can't even check FB or browse on the internet and yes, I have checked, all of my connections are set up correctly. My wireless is enabled on my phone. But it still doesn't work.
8) Email - it's constantly refreshing, even though I have it set to only refresh once and hour. I think I even changed it to once a day. Instead, that little "refresh wheel" spins constantly on my phone and while this little refresh wheel spins, I can't read email, I can't write email and I can't send email. When it finally stops and I open an email and the try to respond and write back, that little refresh wheel starts spinning again and then I have to wait until i can get home to a real computer to actually read & Respond to email.
9) Calendar inputs the wrong time. I had a dentist appt at 9:30am. I set it as 9:30am. When I saved it, it changed it to 10:40am. I went back into the calendar function to change it thinking I had input the wrong time, but no, when I went to edit it, my 9:30 time was set, I hit save again and saving it changed it to 10:40. WTH? I can't even rely on the calendar function.
10) Two weeks ago, I woke up, looked at my clock, which I also rely on as an alarm clock. The room was dark. The clock said 5:30am. But for some reason, it felt later. Sure enough, I get up, check my husbands alarm clock, it's 7:30am. I am so thankful I had a gut feeling and looked at another clock. I did not change my time zone on my phone (in fact, I went looking for Time change stuff and I couldn't even find it. Then two hours later, the phone went back to normal time all on it's own.
11) Text messages occasionally pop up and it tells me it's from Jay Smith (Not real name) and when I open the actual text, it's from Sarah Jenkins (not real name) WTH? How am I supposed to rely on text if its confused itself?
12) Phone shuts itself off all the time, several times a day. All of a sudden I will hear the musical tone of my phone shutting down and then at some point, it will turn itself back on. When I turn it back on, it resends out old text messages (See below)
13) Text message randomly sends out old text messages to people that I sent text messages out to months ago. So the people will text me back saying "WTHeck is this about?" and I look and it's an old text message I sent them a month or two ago. It usually does this when the phone freezes, shuts itself down and restarts. I have found out that IF I delete my text messages timely, then it won't resend out any old text messages, but I am not very good about deleting stuff and often times, text message contains some important information that I haven't yet had the time to copy down and save. I shouldn't HAVE to delete my text messages so it doesn't randomly send out text messages to people.
14) Often times, I will send out a text message and it will fail to send the message and I get a text message saying my text message has failed.
I could go on, but I think that will give sufficient evidence that this phone stinks and that Verizon should give people owning this phone a chance to get a new phone without raping their wallets.
Maybe someone here will listen? Because no one at the store does... I pay for Verizon service that I barely even get to use because my phone doesn't perform like the guy who sold it to me told me it would.
CAN YOU HEAR ME NOW????

About the only thing I can say is to keep going to Verizon, or calling customer service to get them to look at the issues. I talked to 1 rep that told me to dial either 4# symbols, or 4* symbols (Can't remember which it was) after I got the VM message but did not have the phone ring, so it would mark my account record and they could search and troubleshoot the issue.
As far as your upgrade, I think you have done the right thing so far, and that is signing up on this forum, that way you can look at the different phone forums and see what issues that people are having. Talking to people that have the phone is a great way to find out what the issues are. Verizon Sales reps will only sell you the latest and greatest, or if there is something that they are being told to push to get out of stock.
Going with an iPhone is ok, just make sure it is correct for you, because like you said earlier, once it is done, it is done and you are stuck with it for 2 years. I had a friend who made a knee-jerk reaction to a bad phone, and did the same thing. They regretted it after 6 months. I am not saying the iPhone will be bad for you, just make sure you do your homework.

Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
              if (lstProducts.Items[i].Selected)
                            if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                productUnit.Add((decimal?)prod);
                                counter++;
       if (counter == 0)
                   productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
          CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
          ReportLogon rptLog = new ReportLogon();
         rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
         retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank you

Hi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

List Box Problem

Similar Messages

Maybe you are looking for