List of all Solaris 10 services?
I want to strip down the number of running services. I'm trying to find a list of all Solaris 10 services and their interdependencies. Some are obvious, some I could take a pretty good guess at, but some are complete mysteries. And i don't want to willy-nilly disable everything that I don't understand, only to discover that some other necessary process depends upon some bizarre service that I disabled.
Try running:
svcs -a -o FMRI,DESCI think that's as close as you're going to get to what you're after. :)
You can go onward to any manpages from there, and/or check dependencies individually as needed.
Edited by: scottradvan on Sep 3, 2008 8:20 PM
Similar Messages
-
Need function which delivers a list of all servers/services/bapis/functions
Hey experts - I had a question in the SOA-forum and I was adviced to search for help in here!
I hope someone of you can help me with my problems - here my original Thread from the SOA forum
need a list of all services, processes and servers
Thanks for your help!No cross posting
Read the "Rules of Engagement"
regards
Juan -
Copy distribution list to all content services user folders
We have an Outlook distribution list PST file that current resides in a Windows file server. This gets pushed out the the personal folder of each user overnight.
Going forward, we need to push this PST file to all the Content Services user personal folders (Users-A, Users-B ... Users-Z).
I created a single superuser that has all administrative rights to all the users personal folders. And I can upload a file through the webdav http interface.
with the "Upload" button while I'm "Switched to Administrative Mode" only.
And I can't see the users personal folders while using the Oracle Drive nor
thru a Network drive.
Is there a way of pushing this to all the users' personal folders???Hi Juan,
I tried that but it is not showing the shared distribution list for moving.
I found 1 sap BC office document which stats that moving the distribution list form Private to public is not possible due to security reason.
So, no options for me and to create manual shared distribution list.
Thanks
Anil -
Reporting In Service Manager 2012 - How To Get A List Of All Service Requests Regardless of Status
Within the Custom Reporting Options available to users of Ssystem Center Service Manager 2012, which would one use to create reports that do not contain any agregated data but are instead detail level info such as a list of all Service Requests reardless
of status? I want to include within the report the same data you see on the main page of a Service Request when you double-click a Service Request within Service Manager and it pops opne the details of the Service Request.
I'm trying to get the following info for each Service Requests
SR ID (i.e. SR1234)
Affected User
Title
Description
Priority
Source
Area
Support Group
Assigned To
Created By and Created On
I know the cubes w/Excel offer a great way to get data for a **piece meal report or for getting agregated data (I.E. counts, sums, avergares, Max's & Mins) but I need a report that has zero totals and no agregations.
Thanks
** A piece meal report is a report that has to be manually pieced together by combining data from others reports and other sources because no single report can be constructed to bring all the data togethere into a single report. If you've ever
worked with an accountant taht uses Excel for everything but who has no idea how SQL or databases in general are deisgned then chances are you've either been asked to create a piece meal report for them and or seen them do one them selves when they open a
spreadshet and dump into it disperate data from a variety of sources and then ask you why you can't automate that same report for them.the following thread covers some good SQL queries to get details about the Incident Request, just amend them to cover the Service Request
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e703641d-3e05-4df4-be2b-bf9bd62534f8/how-to-generate-incident-report-with-incident-description-field-in-scsm-2012-sp1 -
Need JAVA API to list down all the Proxy Services in OSB Console 11g
Hi,
I need a java API to List down all the Proxy Services present in OSB Console for SOA 11g (11.1.1.5). I am in a situation where I cant use python script for the same.
any help will be much appreciated.
Thanks in Advance,
Ravi
Edited by: 899443 on Oct 1, 2012 4:13 AMAFAIK it is proprietary.
What I do in a similar situation is to form XML for the services, package them into JAR the same way as an import JAR is packaged (creating ExportInfo resource, ...) and deploy with standard WSLT script. Works for simplest services only (direct proxies mostly) but I can also form security, alerts, throttling etc etc etc -- all in one shot.
Out of sheer interest, may I ask you a question? Why do you need to create OSB services from Java?
Vlad
http://vladimirdyuzhev.com -
Need a list of all services, processes and servers
Hi experts,
i'm totally new to this but i need a list of all services, processes and servers. Is there a easy way to get them?
I try to create a tool where you are able to virtually shutdown servers and then you can see what happends to the services and processes. Hope someone can help me.
Thanks
btw - sorry for my englishi'm not sure if you all understand what i'm trying to do so i'll ty to explain it
first i'll try to explain how i understand SOA
- there are several servers on which the services run
- a service is only runnable if his server is active
- a process consists of several services
- if one of these services isn't runnable anymore the whole process isn't runnable too
- there are user who use one or more processes
- if one of the used processes is not able to run the user will be affected
the tool i'm trying to write should automatically import the descriped information (server-, service-, process- and userlists) from a given SAP-Systemand then you can switch virtually a server to see which services, processes and user would be affected.
This would be fine if you want to shut down a server for maintance work or something like that.
so i hope you understand my problem and you are able to help me
again i want to excuse for my english and my wimpy knowledge about the SOA Architecture of SAP -
Locate A list of all the Enterprise Services.
Dear All
Where can I find a list of all the Enterprise Services provided by SAP . I have PI 7.1 in my landscape. Can anyone please provide a link or a transaction for locating the entire list of all the SAP Enterprise Services which can be used with PI 7.1
Thanks.
regards
Nilesh.Hi,
you can find anything or everything from this link.
https://www.sdn.sap.com/irj/sdn/esworkplace
http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?sap-params=cGFja2FnZWlkPURCQkI2RDhBQTNCMzgyRjE5MUUwMDAwRjIwRjY0NzgxJmlkPUFGOEZBNEQ4NjRCMDRBNTY4OEY2RDhGNjZBMTlBNDc1JmZyYWdpZD0%3d
You can download Enterprise Services also for your application and use it.
regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 24, 2009 7:57 AM -
I can't find a list of all of my apps in location services. It doesn't list all of the apps like fios tv remote that I want to use location services for. I mean it doesn't list any of the apps that aren't the factory presets. How can I turn on location services for these apps?
or settings/general/restrictions then under privacy tap on location services. scroll down and it will list apps and whether this service is on/off for particular apps
-
List all web services available in release
Hi,
I was asked to give a complete list of the web services available in crm 7 AND ecc 6.
I looked at the enterprise service workplace but to get the complete list means I must go through each process component and drill down and build the list manually.
I tried to get it from wsadmin and soamanager on the test systems available but there is no export function I found.
Is there a simple way to get this list ?
Thanks.Hi,
For ABAP web services, I would use transaction
SE80 --> Repository Information System --> Enterprise Services --> Service Definitions
I just tried it in my CRM 2007 system and I get 224 hits.
It's not perfect because you will not get the different bindings and you get all web services and not only Enterprise Services.
I hope it helps.
Regards,
Olivier -
I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- MarkI adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ",")) -
Is there a List of all Oracle R12 EBS Standard/Seeded Reports?
Hey,
Does anyone have a list of all Oracle R12_ EBS Seeded Reports in the system?
- Particularly for Finance and/or Purchasing modules
- Ideally with additional information and details regarding what each report contains (a general description or all the fields it includes).
I can only assume there should be a document that lists them all out by module, and includes details of each report. I dug through the document library, but was not able to find anything like that.
Even a list of report names per module would be nice?
If there is a perfect query that brings in the exact Active Report Names and associated Application Name / Module Name that would work too... (emphasis on perfect: Comprehensive, correct, and includes names of relevent Application and/or module)
Thanks,
-Ayyadtry the below to get the list.
"Concurrent Programs report"
"Concurrent Program Details report"
Also, here is the purchasing list
Reschedule Requisitions Purchasing
Location Listing Purchasing
New Vendor Letter Report Purchasing
Purchase Order Detail Report Purchasing
Vendors on Hold Report Purchasing
Receipt Adjustments Report Purchasing
Receiving Exceptions Report Purchasing
Savings Analysis Report(by Buyer) Purchasing
Purchase Order and Releases Detail Report Purchasing
Vendor Price Performance Analysis Report Purchasing
Buyer's Requisition Action Required Report Purchasing
Item Summary Listing Purchasing
Blanket and Planned PO Status Report Purchasing
Purchase Order Distribution Detail Report Purchasing
Purchase Price Variance Report Purchasing
Expected Receipts Report Purchasing
Matching Holds Report by Buyer Report Purchasing
Vendor Purchase Summary Report Purchasing
Unordered Receipts Report Purchasing
Standard Notes Listing Purchasing
Requisition Activity Register Purchasing
Buyer Listing Purchasing
Quality Code Listing Purchasing
RFQ Action Required Report Purchasing
Unit of Measure Class Listing Purchasing
Printed RFQ Report(Landscape) Purchasing
Printed RFQ Report(Portrait) Purchasing
Overshipments Report Purchasing
Purchasing Activity Register Purchasing
Encumbrance Detail Report Purchasing
Item Detail Listing Purchasing
Open Purchase Orders Report(by Cost Center) Purchasing
Purchase Agreement Audit Report Purchasing
Printed Purchase Order Report(Landscape) Purchasing
Printed Purchase Order Report(Portrait) Purchasing
Open Purchase Orders Report(by Buyer) Purchasing
Invoice Price Variance Report Purchasing
Printed Requisitions Report Purchasing
Purchase Requisition Status Report Purchasing
Receipt Traveler Purchasing
Substitute Receipts Report Purchasing
Purchase Summary Report By Category Purchasing
Overdue Vendor Shipments Report Purchasing
Quotation Action Required Report Purchasing
Requisition Distribution Detail Report Purchasing
Internal Requisition Status Report Purchasing
Cancelled Requisition Report Purchasing
Requisitions on Cancelled Order Report Purchasing
Internal Requisitions/Deliveries Discrepancy Report Purchasing
Vendor Volume Analysis Report Purchasing
Vendor Quality Performance Analysis Report Purchasing
Vendor Service Performance Analysis Report Purchasing
Printed Change Orders Report (Portrait) Purchasing
Cancelled Purchase Orders Report Purchasing
Purchase Order Commitment By Period Report Purchasing
Savings Analysis Report(by Category) Purchasing
Receiving Value Report by Destination Account Purchasing
Printed Change Orders Report (Landscape) Purchasing
Receiving Value Report Purchasing
Receiving Transactions Register Purchasing
Purchasing Database Adminstration Purchasing
Send Notifications for Purchasing Documents Purchasing
Upgrade Notifications To Release 11 Purchasing
Country of Origin (By Supplier) Report Purchasing
Country of Origin (By Item) Report Purchasing
Mass Update of Buyer Name on Purchasing Documents Purchasing
PO Output for Communication Purchasing
Purchasing Packing Slip Inventory
Accrual Reconciliation Load Run Bills of Material
Accrual Write-Off Report Bills of Material
Summary Accrual Reconciliation Report Bills of Material
Miscellaneous Accrual Reconciliation Report Bills of Material
AP and PO Accrual Reconciliation Report Bills of Material
Receipt Accruals - Period-End Bills of Material
Uninvoiced Receipts Report Bills of Material
Create Accounting - Receiving Bills of Material
Transfer Journal Entries to GL - Receiving Bills of Material -
How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
szWhile
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen! -
Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801 -
I need a list of all POs "open" (I mean: Material not shipped yet to the End Customer, but still in warehouse And for Services still open in ML81N)
for a specific plant... so can you tell me which tables i have to link to take a report? or else how to make the report?
you can reply to me in [email protected]Hello Ganesh Kumar,
For Open Purchase order - ME2L (By Vendor number) / ME2N (By PO number) /ME2M (By material number) with selection parameter WE101
For Service order, you an use ME2S (PO reporting with services)
Hope this helps.
Regards
Arif Mansuri
Reward if answer is helpful. -
Getting List of all deployed applications thru WebService..
Hello All,
I want to get the list of all deployed applications and components thru webservice..
How can I achieve the above requirement... any suggestions??
Thanks & regards,
Amol.Hi Anil,
Thanks for the links..
But I have already tried this.Will tell u what I have done..
1)Created DC of type EJB. Added "com.sap.exception" and "tc/wd/webdynpro" as Used DC. So at the design time I am able to get the IWDDeployableObject APIs.
2)Created DC for EAR. Added above EJB module and in the reference both the reference targets are mentioned. Out of which "com.sap.exception" is library reference while "tc/wd/webdynpro" is service reference..
Now when I build the projects, both are built. But at the time of deploymeny it throws an error :
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/services/sal/deployment/api/IWDDeployableObject
So I think I should create another DC of type external libray add those required JAR filed... as EJB container might not able to understand webdynpro service references..
Is my understanding correct?
Thanks,
Amol
Maybe you are looking for
-
Can't save images into folders, Get info not detailing either.
Hi, I'm new to Macs having just moved over 3 months ago from PC's and I'm having trouble with saving images and getting system information. When I click on Go > Utilities > then click the down arrow next to the small cog icon I can easily see my sys
-
HELPP!! can't sync music to ipodd!
i restoreed it to facoty settings, to fix problem. now, when i try to sync my music to it, it says the following. "iTunes could not save music to your Music folder because you do not have write access. Check the permissions on your Music folder and f
-
Bypassing iCloud to sync iCal by cable with my iPhone 3
I want to bypass iCloud and be able to Sync my iCal with a cable, currently holded in iCloud, so my iPhone 3 can't sync anymore right now. I'm currently running Snow Leopard again since a few days, I tried Mountain Lion for a month and for several (c
-
HEADER-AEDTM is '00000000' when HEADER-OPERA is 'I'
I am trying to find records in 168 that have been inserted within the time period specified on the PNPCE selection screen like this: if header-endda eq '99991231' and header-aedtm between pn-begda and pn-endda. However, when the HEADER-OPER is "I" th
-
Forum for Sun ONE Studio?
I'm not new to Java technology, but I'm looking for a forum for discussion of Sun ONE Studio, and I can't find one. Is there such a forum on the Web site?