List all web services available in release

Hi,
I was asked to give a complete list of the web services available in crm 7 AND ecc 6.
I looked at the enterprise service workplace but to get the complete list means I must go through each process component and drill down and build the list manually.
I tried to get it from wsadmin and soamanager on the test systems available but there is no export function I found.
Is there a simple way to get this list ?
Thanks.

Hi,
For  ABAP web services, I would use transaction
SE80 --> Repository Information System --> Enterprise Services --> Service Definitions
I just tried it in my CRM 2007 system and I get 224 hits.
It's not perfect because you will not get the different bindings and you get all web services and not only Enterprise Services.
I hope it helps.
Regards,
Olivier

Similar Messages

  • List of Web Services available in NW'04

    Hello Everybody,
    I need the listing of Web Services already available in NW'04. I need to run a pilot project by utilizing the Web Services already provided by SAP for different scenarios in NW'04. Can somebody please suggest/refer me some document where i can find such information. Thanking you in advance,
    Regards,
    Sarabjeet.

    Hi Raja,
    Thanks for the reply. Can you please tell me ON which version ABAP engine this transaction exists. I have one link from EP which takes me directly into Web services Repository. Is it the same which you are talking about. Plz tell me from which SAP Release onwards SAP is providing ESR and how can i browse these. On my IDES transaction WSADMIN doesnt exists. Awaiting.
    Thanks and Regards,
    Sarabjeet.

  • Error on deploying a Web Service on 9iAS release 2

    Hi, somebody could help me on deploying a Web Service on 9iAS release 2?, I have applied the UDDI patch through the orauddi.zip file downloaded from otn web site. But on the J2EE Web Service Deploying Wizard (OEM Web Site), at the Web Service configuration stage, a message is displayed telling me that a Web Service must be deployed if the 9iAS instance which has an infrastructure connection, and this is not my case (I don't want to install the infrastructure. The UDDISYS schema was installed on a simple 9i DB release 2 successfully and for the orauddi application deployed I had created a Data Source for this user).
    On trying to do the same task from JDeveloper 9.0.3, an error ADM is displayed advincing the searching of errors in the log.xml file located on IAS_HOME/dcm/logs directory. Below I have copy the last part of this file, corresponding to the error day.
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2003-07-22T00:27:55.182-03:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>iAS_dcm</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>n/a</MSG_GROUP>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>preventas-ntbk</HOST_ID>
    <HOST_NWADDR>192.168.1.78</HOST_NWADDR>
    <MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
    <PROCESS_ID>null-Thread[main,5,main]</PROCESS_ID>
    <USER_ID>administrator</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>[TM] Config/LoadEdit/ImportExport Adapter resync error</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[java.lang.NullPointerException
         at oracle.ias.sysmgmt.repository.datastore.DataStore.getOutOfSyncPluginConfigData(Unknown Source)
         at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpFromPersistence(Unknown Source)
         at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.syncUp(Unknown Source)
         at oracle.ias.sysmgmt.task.ConfigAdapter.resync(Unknown Source)
         at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
         at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2003-07-22T00:27:56.644-03:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>iAS_dcm</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_GROUP>n/a</MSG_GROUP>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>preventas-ntbk</HOST_ID>
    <HOST_NWADDR>192.168.1.78</HOST_NWADDR>
    <MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
    <PROCESS_ID>null-Thread[main,5,main]</PROCESS_ID>
    <USER_ID>administrator</USER_ID>
    </HEADER>
    <PAYLOAD>
    <MSG_TEXT>[ RM ] Exception in repository API getDBConnect()</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[oracle.ias.repository.schema.SchemaException: Unable to connect to Directory Server:javax.naming.CommunicationException: localhost:389 [Root exception is java.net.ConnectException: Connection refused: connect]
         at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:104)
         at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:331)
         at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:416)
         at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:197)
         at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDBConnect(Unknown Source)
         at oracle.ias.sysmgmt.persistence.PersistenceManager.getSeedInfo(Unknown Source)
         at oracle.ias.sysmgmt.persistence.PersistenceManager.isDBConfigured(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
         at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
         at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    But, I can deploy this Web Service in the OC4J embedded on JDeveloper, successfully (from JDeveloper). Any idea?
    Thanks a lot in advance,
    Pablo.

    Because you do not have an infrastructure database, you will not be able to deploy your web service from OEM as one of its steps is to register the service in the UDDI registy - the Web service deployment and UDDI registration are tied tightly together in OEM right now.
    All is not lost, however. You have two routes to deploy the Web Service on Oracle9iAS:
    1. Use DCM, which is the command line interface to deploy applications/webservices/wars/ears on Oracle9iAS. It does not have the dependency on UDDI.
    To deploy a Web service using DCM, say your Web service ear file were named test.ear your deployment command would look something like:
    c:\oracle\ora903\dcm\bin\dcmctl deployApplication -file test.ear
    See the doc for much more detail to let you tailor DCM to do all the stuff that is available through EM or specific to your application:
    http://download-west.oracle.com/docs/cd/A97329_03/core.902/a92171/dcm.htm#643834
    2. In JDeveloper 9.0.3, there is a DCM Servlet that lets you do remote deployment to Oracle9iAS:
    http://otn.oracle.com/products/jdev/htdocs/readme_9031.html#viadcm
    I suspect your deployment problem from Oracle9i JDeveloper may be (this may be an incorrect assumption) due to trying to use a connection that is setup as if Oracle9iAS is a standalone OC4J.
    Mike.

  • SharePoint lists.asmx web service error in InfoPath and SOAPUI

    We have a SharePoint 2013 farm with web applications using Claims Authentication. I'm trying to create an InfoPath 2013 form where I want to add lists.asmx (https://servername/_vti_bin/lists.asmx) web service to receive/submit data, but I'm getting below
    error, even if I use the farm account when it prompts for credentials. SharePoint logs look clean, IIS logs have some 401 errors. 
    "The file is not a valid XML file. Not enough storage is available to process this command"
    When I add the web service in SOAPUI using the farm account, it works fine. It only throws below error when I use my user account, which is a farm admin and also added to web application's User Policy. IIS logs have 401 error.
    "Error loading [https://servername/_vti_bin/lists.asmx?wsdl]: org.apache.xmlbeans.XmlException: org.apache.xmlbeans.XmlException: error: Unexpected end of file after null"
    Does anyone know how to troubleshoot this issue?
    Thank you,

    Hi rdoe,
    Do you have any update for this issue?
    Whether you checked as Dats said.
    In addition, if you have found a solution for this issue, please share it, it will be beneficial to others in this forum who meet the same issue in the future.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • What is the transaction code for see the Web Services available in SAP

    Hi
    I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
    What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its  urgent
    Best Regards
    Ravi Shankar B
    Message was edited by:
            RaviShankar B

    Hi,
    you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
    Best Regards,
    Boris Mueller
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
    <a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

  • How to find what are all web services depolyed?

    Hi all,
    I am taraka working as BA. I have theoretical knowledge on how web services work. I asked to test web services using SOAP UI.
    I have a URL and soap message. But some time I am getting webservice names and not complete urls.
    I would like to find out list of web services exposed at given url.
    Is there any way to find it?
    Please let me know.
    Thank you in advance..
    Regards,
    Taraka

    Usually you would get the webservice urls from the developers?
    Some appservers can give you a list e.g on jboss you can check hostName:port/jbossws

  • Any commercial web services available in the market which buy/subscribe?

    Hi Folks,
    I would like to know best commercial web services available in the market which buy/subscribe/opensource which will give us the currency exchange rates for common currencies of the world ? Example : USD to INR or USD to GBP.pls list them.
    Thanks,
    developer

    I have found few commercial/free web services for currency exchange:
    Commercial Web services:
    •     DOTS Web Services (http://www.serviceobjects.com/products/commerce/currency-exchange)
    •     Xignite Web Services (http://www.xignite.com/xCurrencies.asmx)
    •     StrikeIron Web Services (http://www.strikeiron.com/ProductDetail.aspx?p=481)
    Free Web Services:
    •     Web Servicex (http://www.webservicex.net/WCF/ServiceDetails.aspx?SID=18)
    Thanks,
    Rajeshwar.

  • Wlst command listWebServices() does not show all web services in the domain

    Hi, I am trying to use wlst command listWebServices() to display all web services of a domain. It seems that it only displays the web services of enterprice applications (ear apps), but it does not show the web services of web applications (war apps). If I pass ear appliication name and one of its web module to listWebServices, it will show the web services that belong to the web module of this application. However if I pass war application name and its web module name to listWebServices, it will return "Unable to find the SOA Composite or Service. Oracle UCM Native Web Services", although I can see from wls admin console or em that this web application does have a couple of web services.
    I also tried to call listWebServicePolicies, again it returned "Unable to find any Web Services with the specified Application".
    My purpose of doing above is to use wlst to detach/attach web service policies for some web services. Since I cannot find the web services, I off course cannot detach/attach policies.
    Does anyone have any clue how to find web services using wlst command that belong to a war application, and then detach/attach policies ? Any help will be greatly appreciated.
    Thanks,
    Jian Huang
    From Oracle fusion HCM

    As of UCM version 11.1.1.6, Oracle UCM Web Services are managed from Enterprise Manager in Fusion Middleware Control, not Weblogic Admin Console!
    A document at Oracle support explains this in more detail: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1456506.1 :
    Setting up GenericSoapService in WLS to use WS-Security:
    Go to FMW Enterprise Manager. http://wlshost:7001/em
    In the tree, navigate to Weblogic Domain -> <Domain Name> -> and click on UCM_server1. (If the managed server for WCC is named something other than UCM_server1, click on that name.)
    From the UCM_server1 drop down menu, select "Web Services".
    On the "Oracle Infrastructure Web Services" tab, click the GenericSoapPort link.
    Once there you can set the policies you want and restart the server!
    Regards,
    Göran
    Edited by: Göran Paues on 2012-aug-20 10:02

  • LYNC Server 2013 LS Address Book and Distribution List Expansion Web Service error - Event ID 62005

    Hi,
      Recently,  I found some of LS Address Book and Distribution List Expansion Web Service error from Lync 2013 Front  End Server, kindly advise help how to solve it. many thanks
    Distribution List Expansion Web Service failed to initialize.
    Exception: The server is not operational.
    Cause: Unexpected exception occurred during initialization.
    Resolution:
    Examine exception details in event to determine the resolution.
    Best Regards
    Thomas

    Hi,
    You can do the following steps to solve the issue:
    Please double check the Windows Firewall is turned off.
    Please check if the CMS replication update to the latest version.
    Make sure Lync Server update to the latest version.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Using SharePoint Lists.AddAttachments web service in LiveCycle

    Hello everyone,
    I have implemented a workflow process that saves data from a PDF form to a SharePoint list, using its Lists.UpdateListItems web service.  This works fine with no issues.  Now, I am trying to take this a step further by also attaching the associated PDF form to the list item, using the AddAttachments web service, but have been unsuccessful.  I keep getting an empty web response back.
    Has anyone been able to use this web service successfully within LiveCycle, particularly with PDF documents?  Please let me know, any help would be appreciated. 
    Thanks,
    cdmh

    Hi rdoe,
    Do you have any update for this issue?
    Whether you checked as Dats said.
    In addition, if you have found a solution for this issue, please share it, it will be beneficial to others in this forum who meet the same issue in the future.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How to get available fields list from web service

    hi,
    i'm using webservices to create ,update and deleting a alead.
    what i want is i want all the id of available fields in my account ?
    how acn i get those id's ?
    regards,
    praneeth

    hi,
    thank u for reply.
    i would like to create a servlet to insert alead to OCRM,
    but for that the user selects the fields he want to insert and provides corresponding values to those selected fields.
    so that i need to display all the fields available in my OCRM account.
    regards,
    Praneeth

  • Web services using Basis release 620...

    Hi,
    We have basis release 620. I was trying to create a webservice for BAPI using Web service creation wizard in BAPI explorer under tools tab.
    But when I go to tools tab, I do not see <b>create web service</b> option in Tool Selection list.
    1) Is it because we have Basis 620 or some other reason ?
    2) So what do I need to do create webservices for my Custom BAPI using Basis release 620 ?
    Thanks.
    Regards,
    Rajesh

    webservice creation wizard is available only from WAS 6.40
    in a 6.20 system, if you want to expose your RFC as a webservice, you can use the following url pattern to ge the WSDL
    http://<host>.<domain>.com:<port>/sap/bc/soap/wsdl11?services=<RFC FM name in UPPERCASE>&sap-client=<client>
    Regards
    Raja

  • ITunes App Store Web Service available?

    Hi there,
    appshopper.com has great lists and rankings about iPhone apps in the App Store. Does anybody happen to know which interface the folks at appshopper use? I am not aware of any official interface (and I don't believe, they do it all manually...).
    Hints are welcome.
    -Ralf

    Apple doesn't publish a web service interface to the App Store. However the iTunes Music (and App) Store is simply a web app and you can actually access iTunes URLs from outside of iTunes.
    There are many examples on the Internet of scripts and programs that scrape information from iTMS for various purposes. Search for "iTunes scrape" and you will find some.

  • Is consumer web service available at SOA Gateway in EBS?

    Hi All,
    I'm a beginner in using the SOA Gateway functionality in Oracle E-Business Suite. I know that we can generate WSDL's. and at EBS side web services acts as Service Providers.
    I want to know if we can use Consumer web service also through SOA gateway in EBS or is there any alternative to call the web services from ebs soa gateway.
    Thanks in advance.

    hello Vijay Ram,
    Ofcourse we can do that. Generating WSDL's and making it available to SOA is called as INBOUND interface.
    For using Consumer webservices, we need to use busineess events and trigger SOA to do the same.
    Please refer metalink for using Business Events.
    Thanks,
    yadnesh

  • Web Service documentation for all Web Services

    Hi,
    In March there was a documentation released named "Shop Floor web service field guide".
    Unfortunately this only documents a few of the available Web-Services.
    I would like to know where I can find:
    1) Documentation for other web-services that were part of previous DataExchange XML.
        Like BomProcessingInBinding, ItemProcessingInBinding.
    2) Updated document for "Shop Floor web service field guide" since I only have the first version. Or information
         if there has been no updating. Can't seem to find this document when searching in SAP Support Portal.
    Br,
    Johan

    Hi,
    Plese find below service market place link below
    https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179414&_HIER_KEY=601100035870000222244&_HIER_KEY=601100035870000235182&_HIER_KEY=701100035871000565647&_OBJECT=011000358700000709862011E&_SCENARIO=01100035870000000112&
    Thanks,
    Ramesh

Maybe you are looking for

  • How to determine the Host a VM runs on, if VM is 2012

    Morning all HyperV host on Win2012 (standard, not R2), guest is the same. Time was, you could query HKLM\SOFTWARE\Microsoft\Virtual Machine\Guest\Parameters\PhysicalHostName on a VM to find out the name of the host it was running on, and this is hand

  • Unable to connect to CMS servername .  A wrong connection is made

    I am trying to enable my File Server on Crystal Enterprise XI R2. I run the following command from a linux prompt. ./ccm.sh -enable input.reportingdb -cms reportingdb.cmd:6400 -username administrator -password password I get the following error: Crea

  • Unable to start a Listener Port on Websphere 6

    Im trying to use Websphere6 with a Message Driven Bean. I dont know if this is Websphere Specific but you have to create a listener port for the server then you reference the listener port in your MDB. But my server fails to the start the listener po

  • Installing CS6 on a mac

    I cannot get past open bundle. It opens a textedit to which it says inside that it must be run on a Win 32

  • Concurrent Manager Problems

    Hi friends I have a problem when I load the concurrentmanger service. When I do I notice that several programs begin to run, one of them is FNDCRM.EXE. But when this program runs, there is a message that aappears: FNDCRM.EXE - Application error the i