List of invoices where some additional expenses were posted

Dear All ,
Is there any reports to list the of invoices, where some additional expenses were posted ?
Thanks,
Dash

I assume you have a specific document type for your invoice posting.  If you have, a simple GL line item list will suffice for your requirement.  Use the Document Type and the Expense GL account as parameters.

Similar Messages

  • Safari will not open after installing Yosemite on my iMac. I loaded it on my MacBook without any issues. I've searched and tried some things that were posted such as safe mode and removing 3rd party plug-ins with no luck. When is there a fix?

    is there an an Apple approved procedure to fix Safari from crashing? From posts that I've read, this was an issue in the Beta version, so I wonder why it was not fixed before it was released. I work all day and don't have a lot of time in the evening to troubleshoot something that should have been tested and approved before releasing. Apple, It just doesn't work.

    is there an an Apple approved procedure to fix Safari from crashing? From posts that I've read, this was an issue in the Beta version, so I wonder why it was not fixed before it was released. I work all day and don't have a lot of time in the evening to troubleshoot something that should have been tested and approved before releasing. Apple, It just doesn't work.

  • Any option to get the list of Invoice with respect to Sales Area

    Dear All,
    Is there any option to check the list of Invoices with respect to the Sales area.
    Because, in VF05, we are getting the list either for a Payer or a Material.
    I want to see the list of Invoices for a Sales area. I mean, it should be similar to VA05, where we can get the list of Sales Orders even without providing the Customer and Material information.
    Reagrds,
    Mullairaja

    HI
    Use the T code VF05N and select the option Bill documents in Fi
    Here you can get the list of invoices
    Try with MC+2
    regards
    Prashanth
    Edited by: Prashanth@SD on Nov 11, 2010 9:44 AM

  • Yoga 2 Pro, Etekcity 16Ah power bank and some additional measurements

    Hello guys, this would be my short review of Etekcity Wingman external battery I use with y2p. As you know, the y2p battery performance is a little disappointing for a Haswell ultrabook (at least for some), so it's a good idea to have some additional external battery beforehand. After some research I found the interesting candidate, the 16.000 mAh external battery manufactured somewhere in chinese factory (Shenzen?) and then being sold under many different brands (I found at least 5 of them on Amazon). I bought the Etekcity Wingman, as it was the cheapest, for 69$
    No links here, but you will find it easily. It has a classy aluminium shell, very good overall build quality, features 5V USB output and additional 12, 16 and 19V outputs with many different plugs. There is no rectangular Lenovo Yoga tip, but in the package you can find the Lenovo X1 big circular plug. So you need an additional converter Cable Adapter from Lenovo, part no. 0B47046 and voila, everything fits.
    This external battery can provide up to 19V and as you are aware, y2p needs 20V. But this is not a problem, it's only 5% difference and nothing to be worry about. As to the amperage, the battery can provide max 3A at 19V and y2p original power adapter is rated at 3.25A - but this is not a problem either, as during my actual measurements I never saw the current more than 3A (more about it later).
    16.000 mAh for li-po cells 3,7V gives about 59Wh of power capacity and this is important. The internal y2p battery is rated 54Wh, so 'theoretically' the external battery should more than double our y2p working time. Well, theoretically, because: 1. as for chinese products they almost always overrate battery specs 2. there is a limited efficiency for internal voltage conversion inside the battery electronics, so there are some losses (heat).
    So, what is the REAL capacity of this thing?
    I did a test. I depleted internal y2p battery to 20% and then I plugged in the Etekcity Wingman, set at 19V. It was able to charge the WORKING laptop for 1 hour and 25 minutes and y2p battery charged from 20% to 85% before the Wingman shut down. It was a little warm while working, but not hot at all (aluminium shell dissipates heat very good).
    What it means is that this external battery was able to provide about 2/3 (65%) of total internal y2p battery capacity and during that time the laptop was working consuming additional energy from the Wingman (70% brightness, wifi/BT on, some light browsing, nothing demanding). I am estimating that if the y2p was depleted completely and shut down, then the external battery would be able to charge it to about 80-85%. I find this result pretty good.
    So if you are able to achieve some 6.5h on internal y2p battery, this external battery gives you another 5h more, for total 11.5h working time out of the socket. Not bad.
    I have a laboratory digital power source, so I was able to do some additional interesting measurements (thanks to the cables and adapters):
    1. The Yoga 2 Pro starts charging at about 16.5V voltage level(!) Anything lower - it won't charge, higher - it will (no BIOS warnings whatsoever).
    2. The charging current for non-working laptop is about 1.6A (I did not set quick charge at Energy Manager).
    3. 70% brightness, "daily" power mode, wifi/BT on, keyboard lighting on and doing some lazy internet browsing needs about 470mA of current (averaged, idle is about 415 mA, as each wifi activity creates current jumps). For 20V it gives 9.4 Wh of power consumption and for 54Wh y2p internal battery it gives about 5h 45min of working time. Lets set this situation as a "base" level.
    4. Same as above, but power mode changed to "stable". Yellow turns mustard, but brightness intensity remains at 70%. The current goes down to about 420mA (50mA less!). It gives you additional 40 minutes for a total 6h 25min of working time.
    5. Same as above, but keyboard light is off. About 20mA of savings, + 15 min for a total 6h 40 min
    6. Same as above, airplane mode (wifi/BT off) - another 20mA of savings (not much), but there are no wifi current spikes so it's like idle mode - about 330mA of current consumption, giving about 8h 15min of working (word editing etc.)
    7. Same as above, 50% brightness (still pretty usable) - 305mA for a total 8h 50min of working time.
    8. Same as above, but with 16.000 mAh external battery - well, you figure it out (+80%)
    Happy New Year!

    20V/3.25A means that if looking for an external power bank for your y2p the voltage must be exactly 20V and the amperage must be 3.25A or more (3.25 is minimum value). These are perfect values.
    But in real world some little deviances are permissible, like 5%. 19V and 3A are examples and I made sure that my external battery rated 19V/3A works good with Yoga 2 Pro. There are more 19V external power banks than 20V models out there and I've chosen my Wingman battery because it was really cheap. But it is always better to find one that meets voltage/amperage ratings perfectly.
    The Energizer XP18000 would be a perfect choice, because it can provide 20V/3.5A. But I dont know if the Lenovo plug is inside the package. And it's expensive.
    The "big circular plug" is 7.9 x 5.4 x 0.9mm plug for some other Lenovo machines, like Carbon X1. I never found an external power bank with "rectangular" y2p plug anyway.

  • How do i check the list of invoices which are not posted into sap.

    Hi All,
    Iam displaying(ALV) the list of invoices and epayments for both PO & non PO transactons which are being processed in workflow but not posted in sap.
    (Non po transaction is th eone with out reference of a PO)
    How to check and list out the invoices that are not posted in sap. where does this get stored.
    please help.
    Thanks
    jyothi.

    Hello Jyothi,
    U can give try with EKBE table for getting invoices for PO. In this table there is a field vgabe which has various status. U can try that. Now for Non PO, u would be directly creating invoice doucment using FB60(i guess) which would create an entry directly into BKPF/BSEG. U can scan BKPF for the date range company code document type KR which vendor invoice.

  • Trying to import RAW files but receiving "some import operation were not performed" error message.

    Trying to import RAW files (from Canon 5D Mark III) but I'm receiving the following error message "some import operations were not performed". I am trying to copy to my Seagate backup drive, however the only destination it will let me copy to is my Lexar flash drive (where I don't want to store them!).  I've checked all the file permissions--everything says "read and write". Not sure where to start   I recently switched to an iMac where the problems started (never any issues importing into Lightroom on my PC--just slowness). Please help! 

    NIKON D3300
    The Nikon D3300 Raw format is not yet supported in Lightroom 5 (currently 5.3).
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Raw file formats are proprietary to each camera manufacturer and specific to each camera model. Adobe's Camera Raw engine (used by both Adobe Camera Raw - as a plugin to Photoshop - and Lightroom) must be constantly updated with every new camera make and model which arrives on the market in order to read and edit Raw files from that camera.
    Adobe has added support for the D3300 to Camera Raw 8.4 which is about to be released. It is a Release Candidate (RC status) at the moment. So D3300 Raw support will probably be added to the next soon-to-be-released Lightroom update (5.4).
    http://labs.adobe.com/technologies/cameraraw8-4-cc/?tabID=details#tabTop
    In the meantime, you can download the free Adobe DNG Converter 8.4
    http://labs.adobe.com/downloads/cameraraw8-4.html
    Using the DNG converter, you can then convert the D3300 Raw files to DNGs then open and edit the DNGs in Lightroom 5.3.
    Once Lightroom 5.4 is released (assuming it also has D3300 support) the DNG conversion will no longer be required.

  • Additional Expenses In GRPO

    Hi All,
    We are using SAP 8.8 PL 15.
    We take following steps for a import cycle.
    PURCHASE ORDER
    GOODS RECEIPT PO
    LANDED COST
    AP INVOICE
    WHEN WE RECEIVE FREIGHT , CLEARING , INSURANCE ETC BILLS (The additional expenses occured in import) we book them .
    After that we are interested in knowing raw material cost. Because we are unable to link our freight bills to the LANDED COST
    DOCUMENT which is pulled from GRPO.
    Any help would be greatly appreciated.
    Thanks
    Malhaaar.

    Hi Rahul,
    Our inventory is getting re valuated properly.
    Only thing is that , when we see a service invoice let us say for clearing charges in A/P Invoice then we are unable to make out against which shipment we paid this clearing charges.
    Or to put it in other words , If in a financial year we pay X amount towards clearing charges to S.J Thacker then we do not know the shipments associated with the bills.
    Through Form Settings, I displayed base ref , base type etc columns but no trace. They are blank.
    Thanks
    Malhaar

  • Internal Error (-5002) on adding Additional Expenses in a sales-document

    Hi All,
    I try to add an additional expense in a sales-document. I receice an internal error (-5002) What is the problem ?
    I want to transfer the additional expense from a sales-order to my target delivery note.
    See my example in C#:
                   oDlvNote.CardCode = cuno;
                    oDlvNote.DocDueDate = oDate;
                    string queryvx2 = "Select ExpnsCode, LineTotal, Comments,
    DocEntry, LineNum From " + tablenameexp + " Where DocEntry
    = " + origornov;
                    using (System.Data.SqlClient.SqlDataReader sqlReadervx2 =
    SwissAddonFramework.B1Connector.GetB1Connector().ExecuteQuery(queryvx2))
                        while (sqlReadervx2.Read())
                            expcode = sqlReadervx2.GetInt32(0);
                            linetotexp =
    Decimal.ToDouble((Decimal)sqlReadervx2.GetSqlDecimal(1));
                            remarksexp = sqlReadervx2.GetString(2);
                            docentryexp = sqlReadervx2.GetInt32(3);
                            linenumexp = sqlReadervx2.GetInt32(4);
                    oDlvNote.Expenses.BaseDocEntry = docentryexp;
                    oDlvNote.Expenses.BaseDocLine = linenumexp;
                    oDlvNote.Expenses.BaseDocType = objectnr;
                    oDlvNote.Expenses.ExpenseCode = expcode;
                    oDlvNote.Expenses.LineTotal = linetotexp;
                    oDlvNote.Expenses.Remarks = remarksexp;
              --->    oDlvNote.Expenses.Add();
                    oDlvNote.Lines.ItemCode = Artikel;
    Regards,
    Roland

    Hi Roland,
    I think it's the same issue as here:
    -5002,if you reference production in a row,so all rows should be refer prod
    Regards,
    Frank
    PS: Expenses are a "lines" type oject - just like Document_Lines - which are handled in the TB1300
    Message was edited by:
            Frank Moebius

  • Can you export shipping docs (packing list and invoice) into a doc file?

    Hello Gurus,
    Is there a way to save ZRPL packing list and ZRIN ROSA Invoice into a file instead of printing?
    For example going to VL03N > outbound delivery > issue delivery output > select ZRPL and instead of printing a hardcopy, can it be exported into a file? I need to do this operation to more than 100 packing lists and invoices. I want to upload it to a sharepoint and save some paper.
    Thank You very much for your responses!

    create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
    updating that field with the new comments  (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
    Please refer few more links: Hope they will help
    http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
    http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
    https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
    http://community.office365.com/en-us/f/154/t/278560.aspx
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Happy Holidays!  Looking for some additional Fonts

    Happy Holidays!
    You guys know where I can download some additional fonts (other than what's in Tiger)?
    Additional fonts that I can use in FCE, and other applications?
    And where they'd need to be installed?
    Thank you
    Happy New Year!
    Mike

    Hi(Bonjour)
    It's more a topic for Mac OS X forum, but you can use any Truetype or postscript fonts.
    There are many place on the web to seek for free fonts, but you can get some uncomplete set (ie without some accented characters, etc) or get bad quality.
    You can also buy font from good font provider.
    Also, you can find some CDs with many of them for a nominal fee.
    Try your Mac OS help menu to figure out where to place those files.
    On a mac, all installed fonts are available for all applications.
    Michel Boissonneault

  • Additional expenses on existing delivery

    Im trying to add additional expenses on delivery which is created already and has no invoice (customer direction).
    I have code
    Dim odocument As SAPbobsCOM.Documents
                odocument = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
                If odocument.GetByKey(docentry) Then
                    odocument.Expenses.Add()
                    odocument.Expenses.SetCurrentLine(1)
                    odocument.Expenses.ExpenseCode = 1
                    odocument.Expenses.LineTotal = value
                    Dim err_code As Integer
                    err_code = odocument.Update()
                    Dim err_msg As String
                    If err_code <> 0 Then
                        oCompany.GetLastError(err_code, err_msg)
                        MsgBox(err_msg)
                    End If
                End If
    but it alwazs ends with internal error after .update. Is it even possible to update existing delivery with expenses through DI?

    Have you tried manually update this existing delivery with additional expenses? If you can, update should work from DI too. Otherwise, it is not possible.
    Thanks,
    Gordon

  • Form with report, where some items in the form have been given values.

    Hi, greetings:
    I have a question that maybe silly but annoying to me. I need to provide a form with report, where some items in the form have been given values automatically, and these items (display only) are supposed to show given values in the form automatically.
    I used the APEX form with report. The update and delete worked well. But I cannot show automatic values when insert. By default APEX insert form makes every item null; I tried to give value for two items: P5212_USERKEY, P5212_DAILY_VER_DATE with process before header, after header, after regions and before footer, and computation, or set values of these two items in the branch when user hit create button (submit). It never worked out, the two items always displayed null value, and when I insert, I got "ORA-01400: cannot insert NULL into ("TBSBI"."DAILYVERPRODNOTE"."USERKEY")", since I have set up constraint in database that these two columns should not be null.
    Could anyone help on this? any suggestion would be appreciated.
    Sam

    If you have made these values 'Display Only' they would by default not save the session state. Accessing the page items will always return NULL. Did you change the 'Save Session State' option to 'Yes'?

  • I downloaded some photos that were from an older version of iPhoto. i installed the application to upgrade. i opened iphoto,

    I downloaded some photos that were from an older version of iPhoto,I was asked to  install the application to upgrade/. (Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.) I clicked ok, & iphoto will  now  not open or close. It continues to search, even when I turn computer off & back on.  Please, HELP???  I NNED my photos!

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
    LN

  • REPORT for list of invoice with an order reason.

    Hi SAP Gurus !
    Is there any standard SAP report which will show me a list of invoice with an order reason field?
    I have tried VF05 and VF05n,but in both of them, order reason as a selection parameter field is missing.
    In case of any clarification kindly revert back to me.
    Regards,
    Ujjawal

    Thanks to all !
    Actually i was going  to create a query with VBRK and VBAK  tables but sales order number is not the common link as sales order number is present in VBAK table only.
    Apart from that i had tried to add VBRK and VBRP table then i was getting the list of invoice with order reasons (because order reason was getting copied from an order to invoice) ,but in this query i'm getting Order reason number with list of invoice only(Description of order reason is not coming).
    Please guide me for this if i'm wrong.
    Regards,
    Ujjawal

  • I got a new ipad mini and chose to set up as a copy of my iPad.  Didn't sync the music on however as it is a smaller model, not enough room.  Now trying to get some pictures and music on.  Chose some pictures that were not in iPhoto, got a message that I

    I got a new ipad mini and chose to set up as a copy of my iPad.  Didn't sync the music on however as it is a smaller model, not enough room.  Now trying to get some pictures and music on.  Chose some pictures that were not in iPhoto, got a message that I could only sync with one library, chose cancel, and apply and it downloaded my pictures anyway.  Now trying to sync some music but just get "The iPad “Linda’s iPad” is synced with another iTunes library. Do you want to erase this iPad and sync with this iTunes library?"  So I hit cancel.  Have tried several times, same thing. What can I try?

    You should be able to accept this message, it will cause existing music, photos (not camera roll) and videos (also excluding those in camera roll) to be removed and replaced with those from this computer. All other user data on the iPad will be unaffected.

Maybe you are looking for