List of IP Phone Support Recording with Engage Recording Server

Hello,
I have a project whereas Engage Recording System will be integrated with UCM 10.5, However I'm trying to find the list of supported phones that can be able to record dual streaming specially for the following phones:
7975
7945
7841
8831
7926
Please advise.

The report Jamie is referring to is under Cisco Unified Reporting > System Reports > Unified CM Phone Feature List. You would choose Product: default, Feature: Built in Bridge.
Here's the output from a CUCM 8.6.2 cluster:
Product Protocol Feature Parameters
Cisco 6911 SCCP Built In Bridge
Cisco 6921 SCCP Built In Bridge
Cisco 6941 SCCP Built In Bridge
Cisco 6945 SCCP Built In Bridge
Cisco 6961 SCCP Built In Bridge
Cisco 7906 SCCP Built In Bridge
Cisco 7911 SCCP Built In Bridge
Cisco 7921 SCCP Built In Bridge
Cisco 7925 SCCP Built In Bridge
Cisco 7926 SCCP Built In Bridge
Cisco 7931 SCCP Built In Bridge
Cisco 7937 SCCP Built In Bridge
Cisco 7940 SCCP Built In Bridge
Cisco 7941 SCCP Built In Bridge
Cisco 7941G-GE SCCP Built In Bridge
Cisco 7942 SCCP Built In Bridge
Cisco 7945 SCCP Built In Bridge
Cisco 7960 SCCP Built In Bridge
Cisco 7961 SCCP Built In Bridge
Cisco 7961G-GE SCCP Built In Bridge
Cisco 7962 SCCP Built In Bridge
Cisco 7965 SCCP Built In Bridge
Cisco 7970 SCCP Built In Bridge
Cisco 7971 SCCP Built In Bridge
Cisco 7975 SCCP Built In Bridge
Cisco 8941 SCCP Built In Bridge
Cisco 8945 SCCP Built In Bridge
Cisco IP Communicator SCCP Built In Bridge
Cisco 3905 SIP Built In Bridge
Cisco 3911 SIP Built In Bridge
Cisco 3951 SIP Built In Bridge
Cisco 6911 SIP Built In Bridge
Cisco 6921 SIP Built In Bridge
Cisco 6941 SIP Built In Bridge
Cisco 6945 SIP Built In Bridge
Cisco 6961 SIP Built In Bridge
Cisco 7905 SIP Built In Bridge
Cisco 7906 SIP Built In Bridge
Cisco 7911 SIP Built In Bridge
Cisco 7912 SIP Built In Bridge
Cisco 7931 SIP Built In Bridge
Cisco 7941 SIP Built In Bridge
Cisco 7941G-GE SIP Built In Bridge
Cisco 7942 SIP Built In Bridge
Cisco 7945 SIP Built In Bridge
Cisco 7961 SIP Built In Bridge
Cisco 7961G-GE SIP Built In Bridge
Cisco 7962 SIP Built In Bridge
Cisco 7965 SIP Built In Bridge
Cisco 7970 SIP Built In Bridge
Cisco 7971 SIP Built In Bridge
Cisco 7975 SIP Built In Bridge
Cisco 8831 SIP Built In Bridge
Cisco 8941 SIP Built In Bridge
Cisco 8945 SIP Built In Bridge
Cisco 8961 SIP Built In Bridge
Cisco 9951 SIP Built In Bridge
Cisco 9971 SIP Built In Bridge
Cisco ATA 187 SIP Built In Bridge
Cisco Cius SIP Built In Bridge
Cisco Cius SP SIP Built In Bridge
Cisco DX650 SIP Built In Bridge
Cisco IP Communicator SIP Built In Bridge
Cisco Unified Client Services Framework SIP Built In Bridge

Similar Messages

Merging local records with device records failed

Hi,
I have a macbook with OS X 10.4.11 (Intel procesor) I did install the latest Pockect mac for blackberry version (the current one in the Blackberry's page), i use to use the old one, since I did the updated I can't get that both, device and Mac SYNC any item, no contacts, no calendar...
The message I got last time was:
06:06:57:140 merging local records with device records failed.
Could some one with me a light on this bug?
Thanks

Hi rguardia,
Can you try synching one PIM database at a time, e.g. just Contacts by itself, so we can determine which database is experiencing the problem? The error you are receiving is likely being caused by one specific database.
Once you have identified the database that is causing problems, can you perform the steps listed below:
1 - Run Data Purge on the affected database. Data purge can be found in the following location:
Mac HD/users/<Home User>/Library/Application Support/PocketMacSyncManager/Additional Tools.
***Please note this utility will delete all information stored in the selected database on your BlackBerry however once the information has been deleted from your device you can reimport the data to your BlackBerry from the application on your Mac.
2 - Run Sync Clean, which can be found in the same folder as Data Purge.
3 - Disconnect the BB from the Mac, remove the battery from the back of the device, wait 10 seconds then reinsert it
4 - Reboot the Mac
5 - Reconnect your BlackBerry to your Mac
6 - Open PocketMac and select Reset All Devices to First Sync State from the Devices menu
7 - Configure synchronization settings for the affected PIM database, choosing the option to Overwrite Device. If the data is successfully transferred to the device, reconfigure PocketMac back to doing a two-way sync.
If you are still running into the same problem after performing the steps above, try synching one category of the affected database at a time. To do this, click on the tab of the database you are trying to sync, click on Advanced Preferences next to the selected application, and choose the option to sync only selected categories. Try synching with only one category selected at a time, just to see if the issue is related to data within a specific category.
Let us know how you make out!

List of mobile phone supports mailto protocol

Hi Everybody,
Can anyone provide the list of mobile client supporting mailto protocol.
It's very very urgent.
With Regards
Jyoti

This is not a Java question in any way. Locking.

Serving static AAAA records with IOS' DNS server

Hi guys,
Has anyone managed to get IOS to serve statically defined AAAA records? I do this just fine with A records as such :
On the router :
ip dns server
ip host ns.example.com 1.1.1.1
ip host somehost.example.com 1.1.1.2
ip dns primary example.org soa ns.example.org [email protected] 21600 900 7776000 86400
From the Linux box :
unixhost$ dig @1.1.1.1 somehost.example.com
; <<>> DiG 9.8.1-P1 <<>> @1.1.1.1 somehost.example.com
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 32168
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
;; QUESTION SECTION:
;somehost.example.com.        IN    A
;; ANSWER SECTION:
somehost.example.com.    10    IN    A   1.1.1.2
;; Query time: 1 msec
;; SERVER: 1.1.1.1#53(1.1.1.1)
;; WHEN: Wed Aug 15 00:42:11 2012
;; MSG SIZE rcvd: 50
Interestingly whenever I add a static ipv6 entry, I get the SOA as an answer instead of the actual AAAA record. But from the router itself, it can use the statically defined hosts just fine.
On the router :
ipv6 host somehost.example.com 2001:1:1:1::2
From the Linux box :
unixhost$ dig -t AAAA @1.1.1.1 somehost.example.com
; <<>> DiG 9.8.1-P1 <<>> -t AAAA @1.1.1.1 somehost.example.com
; (1 server found)
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 53347
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;somehost.example.com.        IN    AAAA
;; AUTHORITY SECTION:
somehost.example.com.        86400    IN    SOA ns.example.com. [email protected]. 3553994542 21600 900 7776000 86400
;; Query time: 1 msec
;; SERVER: 192.168.200.252#53(192.168.200.252)
;; WHEN: Wed Aug 15 00:42:22 2012
;; MSG SIZE rcvd: 108
But from the router, it works just fine :
router#ping ipv6 somehost.example.com
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:1:1:1::2, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 0/1/4 ms
I'm running 15.2(2)T1.
Thanks,
Eric Lauriault

Hello Everyone,
in case someone runs into this thread: In our case it turned out that the problem was related to the DNS Server service. Regardless of the above configuration settings on the NIC and in the registry, the DNS server will always register in DNS using
all of its IPs that the service is listening on. To change this behaviour you can tell the DNS service to only register individual IPS in the registry:
HKLM\SYSTEM\CurrentControlSet\Services\DNS\Parameters
      Add a Reg_Multi_SZ called "PublishAddresses" and specify the list of IPs
In our case we added just one of the three configured IPs and from then on the server only registered this address and not the other ones.
Regards
HarryNew

Screen Recording with ffmpeg/recording mic and speaker output

I've been doing much research on this, and to be honest A/V editing is not my strong suit. I use a script I wrote two days ago to initiate both screen recording with ffmpeg and compiling the resulting mkv file with ffmpeg as well. The entire script can be seen here:
#!/bin/bash
#Create function to exit program
function quite {
if [ $ANSWER3 = "y" ]; then
exit
else
exit
fi
#Create function to start ffmpeg record
function record {
if [ $ANSWER = "y" ]; then
ffmpeg -f alsa -ac 2 -i pulse -f x11grab -r 30 -s 1366x768 -i :0.0 -acodec aac -vcodec libx264 -preset ultrafast -strict -2 -crf 0 -threads 0 $ORIGINALNAME
else
if [ $ANSWER = "n" ]; then
echo "Would you like to convert an existing input file? (y/n)"
read ANSWER4
if [ $ANSWER4 = "y" ]; then
ffmpeg -i $ORIGINALNAME -vcodec libx264 -acodec aac -ab 128k -crf 22 -strict -2 -threads 0 $OUTPUTFILE
echo "The program will now exit"
read
exit
else
exit
fi
else
exit
fi
fi
#Function to convert the recorded video
function convert {
if [ $ANSWER2 = "y" ]; then
ffmpeg -i $ORIGINALNAME -vcodec libx264 -acodec aac -ab 128k -crf 22 -strict -2 -threads 0 $OUTPUTFILE
else
exit
fi
#Change to Screen Record directory in My Videos
cd ~/My\ Videos/Screen\ Record/
#Clear screen, and ask for input on what to name the origional file and the converted file
clear
echo "Please, enter the name of your file followed by .mkv"
read ORIGINALNAME
echo "You're files name is $ORIGINALNAME!"
echo "Please, enter name of the output file followed by .mp4"
read OUTPUTFILE
echo "You're final file is $OUTPUTFILE!"
clear
#Prompt for continuing with recording
echo "Would you like to continue with screen recording?[y/n]"
read ANSWER
clear
#Run the record function
record
#Prompt for converting the created video
echo "Would you like to convert the file now?"
read ANSWER2
clear
#Run convert function
convert
#Prompt to close command
echo "Operation finished, all done."
echo "The program will now exit."
read ANSWER3
For simplicities sake, and because I don't think there's a real problem with my script but something else, here's the two ffmpeg scripts from the above script:
recorder
ffmpeg -f alsa -ac 2 -i pulse -f x11grab -r 30 -s 1366x768 -i :0.0 -acodec aac -vcodec libx264 -preset ultrafast -strict -2 -crf 0 -threads 0 $ORIGINALNAME
compiler
ffmpeg -i $ORIGINALNAME -vcodec libx264 -acodec aac -ab 128k -crf 22 -strict -2 -threads 0 $OUTPUTFILE
Anyway, I have pavucontrol used to set the recording input after I've started recording. I want to be able to record the sound of my voice on my usb headset (which works fine) and be able to hear the sound of music or a youtube video I'm also playing during the recording. I've seen the loopback mixer from Alsamixer gui and the input, output, and record tabs in pulseaudio mixer. To be honest, after researching all this stuff in ffmpeg (which is a ocmplicated program) and whatever amix, dmix, and some other programs I'm not sure what are, I have no idea where to go anymore. I'd continue researching, but I'm only getting more confused the further I go. I'm extremely willing to learn and will follow any instructions you give to help me out. I don't just want to do this one task, like how I learned enough to write a script file, I want to be able to tweak ffmpeg to suit my needs for any purpose it can be used for. This is my first step to being able to do that. Thanks ahead of time for your help.

OK, I've manages to learn enough about jack to not break my system and can work with that, Pulseaudio, and alsa is always installed. Is there a way I can create a virtual device that takes in the input from both the system sound and the headset mic that I can set as the audio input for ffmpeg? I've been looking online and I've got a headache at this point from trying. I have learned to use ffmpeg on a new level, but I still can't do what I want to do. (which is record sound from the headset mic and the system sound at the same time while using ffmpeg. I could make two audio files from each channel and record the screen with x11grab. then combine all that using another utility, but then I have to run three separate programs at the same time (which will eat up my cpu) and still run whatever I'm recording from my screen. Something that will do all this for me would be much appreciated.

Checking Previous record with current record.

I have a small problem, i want to compare the previous record with the current record with in cursor declared....
Please help in this issue.
Thanks in advance.

Try the lag analytic function.
select some_value, lag(some_value) over (order by your_ordering_condition) from x order by your_ordering_condition

How many min. can i record with voice record with MuVo V200 1

Hi,
I'm going to buy the Creative MuVo V200 GB.
Now my questions about this player.
How many minutes can i record over voice recording.
Maybe someone can tell me how much Megabytes minute of recording will take.
Are there different quality levels of recording?
In which format does the player save the recordings?
I will use the player to record lectures at the uni'versity.
Did anyone have done this?

Stereo recording with MP3 recorder using external stereo

I want to record digital streo sound and wonder if I need to buy a MD recorder or if I could use an MP3 recorder which I'd prefer?Therefore please explain if an external stereo mic. can be connected to any of your MP3 players/recorders. If so, which model. If not, please explain if an external stereo mic. also could be connected to the 'line in', and if so, if it could be connected directly, or if it needs to have a preamp in between. If so, which preamp to use with which MP3 recorder?thank you for any answer.
kuuan

thank's for your fast answer. Are the two players you mention older models? According to the creative site there are three models offered nowadays with the name 'jukebox7: Jukebox Zen NX, Jukebox Zen Extra and Jukebox Zen USB 2, but as much as I understand their specifications they do not have a 'line in', or do they? If they don't, well, even though this is a creative's forum, are there any MP3 recorders from other manufacturers which would do the job?
Concerning the mic, are there mics offered which include a preamp? If so, which one would you recommend? If not, what kind of preamp with which specifications do I have to get to connect with which kind of mic? Any mic offered for MD recorders? Would my Panasonic mic of my video recorder do the job as well? Could be that this mic for the video recorder already includes a preamp?
thank's again for any help,
kuuan

When Recording with DAE, recording sometimes cuts out...

but not all the time - it appears random. Playback will continue, but when I stop playback, the recording stopped somewhere in the middle of recording. It only happens occasionally but of course it's a pain. No error messages appear.
Is it because I only have Protools 7.1cs6?
I'm using Logic 8.0.1 on a Dual G5 2.7 on OS 10.4.10, 4G Ram.
Thanks for any tips,
Regards,
Ken

1. try changing the settings under Preferences/Audio/Devices/DAE: PT HD-Type to at least 64 tracks (2 DSP´s); for me that helped
2. also problems can cause if you have instanciated EXS24 TDM Instruments, so if my first tip doesn´t help, try this
greatings

ORA-22275 with BFILE record processing

Hi All,
I'm processing records in a table that contains an optional bfile column and then comparing each record with another record from the same table. I'm getting "ORA-22275: Invalid LOB locator specified" when I get my comparison record using a function - and the cursor record contains a null bfile following a not null bfile record.
Here's my simplified 11g test case:
create table jr_test
(pk_id number not null
,stuff varchar2(100) not null
,external_file bfile);
insert into jr_test values (1,'Some other data',bfilename('MY_DIR','jr1.txt'));
insert into jr_test values (2,'Some other data',bfilename('MY_DIR','jr2.txt'));
insert into jr_test values (3,'No bfile',null);
commit;
DECLARE
   l_rec_1 jr_test%ROWTYPE;
   l_rec_2 jr_test%ROWTYPE;
   FUNCTION record_to_compare(p_id IN jr_test.pk_id%TYPE) RETURN jr_test%ROWTYPE IS
      l_rec jr_test%ROWTYPE;
   BEGIN
      SELECT *
      INTO   l_rec
      FROM   jr_test
      WHERE pk_id = p_id;
      RETURN l_rec;
   END record_to_compare;
BEGIN
   FOR x IN (SELECT *
             FROM   jr_test
             ORDER BY pk_id /* desc */) -- ORA-22275 when order by pk_id asc
   LOOP
      l_rec_1 := x;
      -- Get another record (it's always the same one in this test case)
      l_rec_2 := record_to_compare(x.pk_id);
   END LOOP;
END;With a descending order by clause (ie. null bfile first) it works OK.
With an ascending order by clause (ie. not null bfiles first) it crashes with ORA-22275.
It looks like a LOB initialisation problem, but I's welcome your comments.
Regards
JR

Hello
It doesn't actually appear to have anything to do with the order by as such, it is just the order in which the rows are accessed. I've modified your test case to just call the function in a specific order. However if I change to use a stored procedure with an OUT parameter, there is no such issue. I'll dig a bit more but maybe this helps narrow the field of search down a little...
XXXX> declare
2      l_rec_1 jr_test%ROWTYPE;
3      l_rec_2 jr_test%ROWTYPE;
4
5      FUNCTION record_to_compare(p_id IN jr_test.pk_id%TYPE) RETURN jr_test%ROWTYPE IS
6         l_rec jr_test%ROWTYPE;
7      BEGIN
8         SELECT *
9         INTO   l_rec
10         FROM   jr_test
11         WHERE pk_id = p_id;
12
13         RETURN l_rec;
14      END record_to_compare;
15
16   BEGIN
17
18     -- Get another record (it's always the same one in this test case)
19     l_rec_2 := record_to_compare(1);
20     l_rec_2 := record_to_compare(2);
21     l_rec_2 := record_to_compare(3);
22
23   END;
24   /
declare
ERROR at line 1:
ORA-22275: invalid LOB locator specified
Elapsed: 00:00:00.12
XXXX>
XXXX>   declare
2      l_rec_1 jr_test%ROWTYPE;
3      l_rec_2 jr_test%ROWTYPE;
4
5      FUNCTION record_to_compare(p_id IN jr_test.pk_id%TYPE) RETURN jr_test%ROWTYPE IS
6         l_rec jr_test%ROWTYPE;
7      BEGIN
8         SELECT *
9         INTO   l_rec
10         FROM   jr_test
11         WHERE pk_id = p_id;
12
13         RETURN l_rec;
14      END record_to_compare;
15
16   BEGIN
17
18     -- Get another record (it's always the same one in this test case)
19     l_rec_2 := record_to_compare(3);
20     l_rec_2 := record_to_compare(2);
21     l_rec_2 := record_to_compare(1);
22
23   END;
24   /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
XXXX>
XXXX> declare
2      l_rec_1 jr_test%ROWTYPE;
3      l_rec_2 jr_test%ROWTYPE;
4
5      PROCEDURE record_to_compare
6      (p_id IN jr_test.pk_id%TYPE,
7       p_row out jr_test%ROWTYPE
8      )
9      IS
10      BEGIN
11         SELECT *
12         INTO   p_row
13         FROM   jr_test
14         WHERE pk_id = p_id;
15      END;
16
17   BEGIN
18
19     -- Get another record (it's always the same one in this test case)
20     record_to_compare(3,l_rec_2);
21     record_to_compare(2,l_rec_2);
22     record_to_compare(1,l_rec_2);
23
24   END;
25   /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
XXXX>
XXXX>    declare
2      l_rec_1 jr_test%ROWTYPE;
3      l_rec_2 jr_test%ROWTYPE;
4
5      PROCEDURE record_to_compare
6      (p_id IN jr_test.pk_id%TYPE,
7       p_row out jr_test%ROWTYPE
8      )
9      IS
10      BEGIN
11         SELECT *
12         INTO   p_row
13         FROM   jr_test
14         WHERE pk_id = p_id;
15      END;
16
17   BEGIN
18
19     -- Get another record (it's always the same one in this test case)
20     record_to_compare(1,l_rec_2);
21     record_to_compare(2,l_rec_2);
22     record_to_compare(3,l_rec_2);
23
24   END;
25   /
PL/SQL procedure successfully completed.HTH
David

Distorted audio while recording with ScreenSflow

Hi all,
when I record my screen using ScreenFlow (latest version) I get distorted audio.
I am not using external speakers and I just need to record with the "Record Computer Audio" option and nothing else selected.
How do I fix this? It makes it unusuable...
Thanks

You can connect a mic to the iPod via the headphone jack and that mic will be used by the video app you use for the video camera on the iPod. I do not remember if the built-in mic gets cut off when yo do that so you may have to cover the mic hole on the iPod.

I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
i have told them nuumerous times that for better understanding i have made a video of it but no response..
really disspointed with your customer support.
i have uploaded them in google docs..links below.. t
he first one happened on 30th of april 2014 https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
the second happened today. i called customer care but no satisfactory respose either. https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
its still under warrenty. please help.

Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it.

At the end of my rope with phone support.

I'm not sure what anyone here can do, but I need somplace to share this with. Its extremely frusturating.
Less than a month ago, I purchased my first iMac. It was a slightly older model- a 20" Aluminum 2.0ghz machine. It was purchased from a re-seller and had obviously been sitting on the shelf for a while. I know that the warranty date starts from the purchase date of the re-seller; there is a form to fill out if it needs to be changed to your actual purchase date. In a situation like mine, where the computer had been in the store for around a year, this was essential if I wanted any kind of phone support.
I filled out these forms, faxed a copy of the receipt to the number I was supposed to, and assumed everything would be fine. Within 24 hours, Boot Camp managed to screw up the OS X partition of my hard drive. I needed to make several calls to customer support, where I had to argue with all of them due to the purchase date update taking up to 72 hours to go through. After several phone calls, where I had to explain my situation 15 times and wait on hold for 45 minutes while they found out that it takes 72 hours for the change to go through, and after literally 5 hours of driving to my nearest Apple stores until someone was willing to help me with the problem even though I was "out of warranty" (Reminder- I had purchased this computer 2 days prior. New, off the shelf in the store. It absolutely should've been under warranty.) I was finally able to get the computer fixed.
Today, I figured I'd check on the status of my purchase date switch, so the next time something goes wrong with my computer I don't have to battle with tech support to get them to listen to my problem. I entered the serial number in the warranty info page, and it tells me:
*Our records indicate that your product is covered under a custom contract. For more information about your coverage, please contact us.*
*Your product is not eligible for complimentary phone support.*
When I click "contact us," the only thing that would be able to potentially help me out is the Apple Customer Service phone number. I don't feel like calling and having someone with a medium-thick accent repeat back to me what they understood my issue to be 5 times until they finally get it right. I would love to write it out so someone can just re-read it if they don't wrap their mind around it the first time.
I don't see why I should have to argue my case. I went to an Apple Authorized Reseller, swiped my credit card, and walked out with a new iMac. No, it's not the newest model, but its still new. That's money that just went in Apple's pocket, because of my purchase. There is absolutely no reason why it should be this big of a struggle just to get the warranty that I deserve. I don't feel like I'm being unreasonable or out of line in any way.
Does anyone know who I can EMAIL about this, or am I going to have to put up with the non-help I get on the phone? They're going to tell me that they can't help me out, because I'm supposedly not covered for phone support anymore. Ugh. Please help.

I'm not sure what anyone here can do
Nothing. These are user to user forums, of which Apple employees do not take part in.
Does anyone know who I can EMAIL about this,
Nobody...Apple does not offer email support/correspondence. Call support and ask immediately to speak to customer relations.

Phantom restarts / crashes with Maverick. Restore Disk Utility, disk can't be repaired says "live system repair is not supported" Is there a fix yet? Or is Maverick "FREE" because Apple no longer offers free phone support?

Phantom restarts / crashes with Maverick. Under restore Disk Utility, disk can't be repaired says "live system repair is not supported" Is there a fix yet? Or is Maverick "FREE" because Apple no longer offers free phone support?

Get onto the integrated iOS + Mac OS and end support for "legacy" Mac 10.8 and earlier.
Force older hardware users like me to upgrade to new hardware which is where $$ are.
Make apps work across tablets, phone, and computer with similar (though not the "same" app, but able to read and use the same file format).
Simplify.
I don't think anyone incl. Microsoft knew Windows 8.1 was going to be a free upgrade, I didn't and read that it would be more like $30.
No OS is ready for everyone on the day it is launched. iOS 7 is now 7.04 and climbing, Mac OS tends to really not be ready until the last patch and version is out, often a year or more after it was first issued. Ship it, then plan to fix the bugs left in or that surface.
www.macperformanceguide.com is saying "No" to Maverick for now. Of course there will be no "No" on new Mac Pro 2013 6,1 when those ship (Late Jan? )

Error in sharepoint external list while creating record with same id (this id is primary key)

Hi,
I have created one external content type in sharepoint designer to insert/update/delete table data.
This table contains Primary key constraint.
Then I have added this external content type to Sharepoint out of box List.
Insert/Update/Delete is working fine. But when I am trying to insert record with the same id which is already exist in table, page crashed and its giving me following error:
“Violation of PRIMARY KEY constraint 'PK_tbl_Accounts'. Cannot insert duplicate key in object 'dbo.tbl_Accounts'.
The duplicate key value is (1). The statement has been terminated.”
So I want to handle this exception. Can we show any popup message to hide this error?
Thanks & Regards
Rajni

Avoid entering of primary from form if possible.
if not try to customize the new form with infopath and place your custom logic there.
http://lightningtools.com/uncategorized/modifying-external-list-forms-with-infopath-2010/
http://salnikan.wordpress.com/2011/07/26/prevention-of-duplicate-entries-based-on-two-or-more-columns-in-a-sharepoint-list/
Bala

List of IP Phone Support Recording with Engage Recording Server

Similar Messages

Maybe you are looking for