List of SAP B1 modules and sub module required

Hi Experts
Can you tell me where I can find a complete list of all the module and sub modules available in SAP B1? I have tried to run a query on table OPRM which is displayed in System Information when I am in Auhtorisations table but SAP B1 and SQL server doesnt recognise the table name either in my SAP B1 database or in SBO Common.
Thanks
Jon

Hi Jon,
You may check this thread:
Table Name for Authorization
Thanks,
Gordon

Similar Messages

Combine report list for SAP-PP module

Respected SAP GURU,s
Can any body give me the combined report list of SAP-PP modules or give some direction to search it.
SFC route is not required...
pl reply urgently
Rewards point will be given.
VEDANT

Hi,
These are the few reports
1. KanBan Analysis1 Plant
Txn Code: MCQ.
This report gives information of KanBan usage. This can be used only when KanBan Component is used.
2 KanBan Analysis 2
KanBan Board Demand Source Overview
Txn Code:
PK11
PK12
PK13
PK18
This report gives information of KanBan usage. This can be used only when KanBan Component is used.
3 Material Usage Analysis Plant
Txn Code: MCRE
This report can be used for analyzing the actual material usage against plan in manufacturing process.
4 Product Cost Analysis Selection Plant
Txn Code: MCRI
This report can be used for finding out planned cost vs. actual cost in the manufacturing process
5 Missing Parts Info System
Txn Code: CO24
Missing Part List Check

Main heading and Sub Heading Requirment in ALV wih download to excel featur

Hello Everyone,
I have a very typical requirment in ALV . I want the output to be displayed as folows :
Category
Head1
Head2
Here the heading category is just a heading and no header and line item data. so hirearchal kind of ALV is of no use. and i cant write this was in TOP-OF-PAGE as i want to download this data to excel and if i write it in TOP-OF-PAGE the dwnload in excel is misaligned. I have been thorugh the various topics posted here and couldn't get a feasible solution. Please Help.

Hi,
This is not possible
Refer these links
Re: ALV query
Re: Multiple lines in alv column headings
If this solves ur problem reward points and close the thread

Sap mm md04 and ms04 stock requirement and long term planning issue

Hi guru's,
i have one issue regarding MD04 and MS04. in MD04 3 storage locations were showing. in that the stock in 2 storage locations was excluded due to no long term plan.
now if we see in ms04, these 2 storage locations are not appearing. now my logistics manager wants to maintain the long term planning for these two also.
in md04,,, 3 storage locations available ..same like ms04 should follow
provide the solution as soon as possible
Thanks & Regards
Prasad.

Mukesh,
To change the forecast from occuring at start of period ( month) you can always select the Schedule line Tab in MD61,MD62. then select period indicator as Day format as shown below
Per. Ind          Date              Qty
D     17.05.2010     30
D     15.06.2010     40
D     15.07.2010     50
System will then plan PIR (forcast) based on dates assigned by user instead of being placed on the first day
of the period. This will prevent forcast to fall into the previous month. Also it will resolve the capacity issue you are facing.
If you have more questions please come back.
thanks,
Ram

SAP PS Certication and Study material required

Dear All
Am planning to appear for my PS certification. I dont have relavant study materials for the same. Kindly send me a copy of the PS material to my email id [email protected]
Thanking everybody in advance
Murali

Hi tushar
can u send me the certification material for PS.i am planning to write in Jan.My emailid is [email protected]
thank you in advance
mahesh

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Vendor classification and sub classification

All,
we have list of vendors with classification and sub classification. They need to print the vendor line item report with these two classification. For example
Vendor abc has classification of non-raw material and sub classification of indirect material. vendors with freight classification and service sub classification. etc
Can someone please help me of how we can do this. I need detailed information.

Define class groups and classes separetely link each class to the rel. group. Assign the class to the vendor.

SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions

Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS.   Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab.    Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective?   When would a Developer pick one over the over?
Thanks for any advice
-Dave

Hi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc

Current list of all SAP modules and sub-modules

Can anyone point me to a current and comprehensive list of all available SAP modules and sub-modules? Currently, the best source I have found for this list is SAPNote 36677, which lists all the structure of components for customer incidents. However, this SAPNote list is over 23K line items and includes information outside of the modules and sub-modules, in a format that is difficult to normalize.

Eric,
a similar question was posted in this link: http://scn.sap.com/thread/3652322
Assuming you are looking for an overview on the modules for the SAP Business Suite, personally I like the list in the SAP help
Also a valuable resource is the SAP Release Strategy webpage, which provides link to the Solution Explorer, which shows the available modules by LoB Line of Business or Industry solution, and the official Product List called PAM Product Availability Matrix, which is pretty technical.
thank you
erich

Where-Used List: Modifying SAP standard function module

Hi,
We have decided to modify SAP standard function module SD_SCHEDULING. But before that, we need to understand what impact this modification will have in the system. We will also estimate the risks with this modification.
Therefore, I have taken Where-Used List for this function module. We are aware that this list is not comprehensive.
Do you know any other way we could use to understand better what impacts this kind of modification may have? My colleagues say that this is the only way.
Thanks in advance for your help.
Regards,
Jarmo Tuominen

Hi Jarmo,
Try this
1). Goto Se16 and check the contents of table 'CROSS'.
2). Enter 'F' in the first selection screen field
3). In the NAME field enter the Function module SD_SCHEDULING and execute.
4). The list will give you where all the FM has been used.
Kindly note this is almost the same as doing a where used list. The where used list will only work correctly if the 'Update Navigation Index' works correctly in your system. So just to ensure the result of your where used list you can follow the above steps. This does not require the Update Navigation Index.
Hope this helps
Cheers
VJ

SAP's Modules list

Hi,
I need to know what are available modules in SAP. Can any give me a complete list.
Thanu

Hi
Please see sap module list
Logistics :
Material management
Sales and distribution
Production
PP-PI ( prod for process industry)
Plant maintenance
Cust service
Quality management
Logistics control
project system
EHS
central function
Accounting
Tools >> abap , basis
Please reward points
Sunil

I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

Welcome to Apple Support Communities
The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

REQ SAP FI MODULE- CERTIFICATION EXAM QUESTIONS AND ANSWERS

REQ SAP FI MODULE- CERTIFICATION EXAM QUESTIONS AND ANSWERS
Moderator: We should be thankful that you don't require to solve the exam for you

Please type "certification" in the search field, you can find many threads regardding this.

Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module

Dear All,
I would like to know the know the Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module. I have already gone throught the release notes and
upgrade erp in service.sap.com. I have also checked solution browser.
Its Urgent.
Regards,
Rakesh

Hi Rakesh,
Some of the differences are:
1. Document Flow
In ECC 6.0, The flow of sales documents is seen much better and improved as compared to 4.6C. Once You look at the screen, You will clearly figure out the difference.
2. Sales Order Look and Feel
There are more tabs in ECC 6.0 for Item Level Details.
The Sales Doc. appears as supremely perfect.
3. ECC 6.0 is built on NetWeaver Technology (that possess SOA i.e. service oriented architecture) , Hence more reliable and Improved as compared to previous one.
Hope this will help you. Reward if found useful
Regards,
Gaurav Raghav

Interface between business ware house system and SAP SD module

hi,
I want to develop interface between business ware house system(file adapter) and SAP SD module. how can i post the data into SD system? can any one tell me which Idoc i should use in receiver side?
if i want to go abap proxy how can do it?
give some inputs(methods which i should use)
Thanks in advance
regards
Ruban

Hey
the selection of IDOC depends upon what you wanna post into SD.get in touch with the ABAP guys and they should be able to tell u exactly which IDOC to use.
once u have decided on IDOC,you can go for a File to IDOC scenario.
as far as proxies are concerned,they kinda give better performance compared to IDOC but you need to do ABAP coding for them,in that case u dont need any IDOC
Thanx
Aamir

List of SAP B1 modules and sub module required

Similar Messages

Maybe you are looking for