List of transcation Z not used last year

Morning gurus,
is there a method to extract the list of transaction custom, not used in the last year?!
I remember there is a table where I can insert a value in a particular field to extract the "not used" transaction Z, but I don't remember which is...
can you help me!??!
<subject_changed>
*Do not use UPPERCASE on the subject
Please read the "Rules of Engagement"
thanks
regards
lorenzo
Edited by: Juan Reyes on Jan 5, 2009 10:58 AM

hi,
Check whether the following info can help you?
Go to transaction ST03 or ST03N --> workload >> select correct server >> double click on the day/month/week.
Then you will be able to see the analysis view for that particular day/week/month. Select "user and settlement stats" >> "user profile" .
You will get the list of users who accessed the system on that particular day/week/month according to your selection. Then double click on the user to get the transaction he accessed during that period..! Thats it!!

Similar Messages

  • Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

    Why when I try to update certain app it require an old email address and password I have not used for years and I do I get to update them on my new details

    Apps are tied to the Apple ID that was used to purchase them and you will always need to use that ID and password in order to update them.
    Saying that you do get to update them on your new details makes no sense at all.

  • I have an old AOL account not used for years. No I have realized some years ago I have signed in into the apple storewith this email. Now I am not able to change this apple ID. Has s.o. an idea how to work this out?

    I have an old AOL account not used for years. No I have realized some years ago I have signed in into the apple storewith this email. Now I am not able to change this apple ID. Has s.o. an idea how to work this out?

    See this -> http://support.apple.com/kb/TS1299

  • Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year. Question 1: Problem = hard drive? Question 2: Problem = PRAM battery? the What

    Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year.
    Question 1: Problem = hard drive?
    Question 2: Problem = PRAM battery?
    the
    What can I do to boot?

    Restart with the Option key held down.
    If the internal drive shows up, it's the PRAM battery.
    If it doesn't, insert a compatible Mac OS 9 or X install disk, click the button with the circular arrow, and either repair the internal drive or install a new OS on it. If it doesn't show up in Disk First Aid(9) or the Disk Utility(X), it's either not plugged in or needs to be replaced.
    (97530)

  • TS2446 Apps asking for old email account password I have not used in years

    Please tell me how to remove old email accounts that are connected to my apps? It is asking for yahoo password that I have not used in years. I need to delete yahoo account linked to apple account

    It's doing that because these apps were originally purchased with that Apple ID.  Apps and their updates are permanently tied to the Apple ID used to purchase them.  The only way to stop this would be to delete these apps from your phone and your iTunes library, then repurchase them with your current ID.

  • How do I create a new calendar for the current year, using last years calendar's birthday's/photos and comments from the lower pages?

    Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe.  I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar.  How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!!  I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
    Thanks in advance. 
    Colin

    Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
    Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
    OT

  • Creation of Budget using Last Years Actual budget

    Hi,
    1) Is it possible to create new budgets using copy function to copy last years' actual budget to create a new budget.
    2) Also copy budget from one fund center/commitment item to another fund center/commitment item
    If it is not the standard functionality then how this can be done.
    Regards,
    Jyoti

    Hi,
    You can copy budget via FMCYLOAD - Generate Budget Data activity. You can define reassignment strategy restricting it to CBV year-end process in FMYC, and thus, making available copying from one budget address to another.
    Regards,
    Eli

  • What Tools/Technologies Do You Use Today That You Didn't Use Last Year?

    Here we go again...
    I'm starting work on another column for Oracle Magazine, and once again I would like you to share your insight and experience. The questions for this go-around:
    What  tools/technologies are you working with this year that you were not working with last year? Why?
    What tools/technologies are you working with this year that that you expect to start phasing out in the next year?
    As before, I'm looking for interesting responses that I can quote in the magazine article. All quoted material will be fully attributed -- that means you will be indentified by name, role, and employer. If you prefer to remain anonymous, no problem.
    My deadline for this is fast approaching, so if you want to be quoted in the magazine I need your response by Monday April 20. If you have any questions for me on this process, please post a reply.
    Thanks!
    Bob Rhubart-Oracle

    How has your work as a software architect or developer changed in the past year?
    There are always new technologies popping up in IT and some of them vanish quietly. That's IT. And that's the difference between an real architect and a software architect (buildings and bridges are built based on the same principles of structural analysis as hundreds of years ago).
    Last year Docker appeared on the stage. As A. Cockroft put it, Docker wasn't on anyones roadmap for 2014 - its on everyones roadmap for 2015.
    Obviously as an Oracle ACE Director I focus on new technologies in the cloud and middleware space, including open source projects.
    How have you adjusted to that change? Was the adjustment difficult?
    Well, my trick is to explore technologies early and then decide for myself if it's more marketing or worth to evangelize it. Obviously this is time consuming.
    I presented the possibility to run WebLogic on Docker and also to run Docker containers in public clouds already at Oracle Open World 2014. At that time only 2% of the audience was aware of Docker! During a 1 day cloud workshop at the German Oracle User Group Meeting a month later in Germany I did a hands-on demo.
    Today everybody is crazy about Docker. It's certainly a hype and it nicely goes with the micro services trend. Unfortunately this also means that people forget about open technical issues.
    Now Oracle officially certified WebLogic to run on Docker! That is really cool. Interestingly this is based on the work that Bruno Borges from Oracle did and open sourced on github.
    How might your work change over the next year?
    Myself, I expect to focus more on container orchestration, PaaS, and on big data (machine learning will be a part of it). Again there are dozens of open source projects in this area yet Oracle is surprisingly well integrated with its own big data product pipeline.
    Also I am expecting verbal fights with those who rejected SOA some 5 years ago but now believe that microservices are the silver bullet.
    Same as with those who believe that they do devops but they actually don't.

  • Can Not Use LAST Button to go Back to DVR Recording

    My LAST button works fine from chanell to channel.  I can be watching a DVR recording, and the box will go back to the live channel I was watcing when I hit LAST.  If the LASt button is pressed again, it does NOT go back to DVR.  I know with Comcast, the LAST button would go back and forth from live to DVR recordings.
    Anyone found a work around for this?  We be nice to go back and forth from DVR to live TV with just using the LAST button.

    This is one of the few things I miss from Comcast.  Monday nights I'll be watching 24 and recording Raw.  I would always switch over to wrestling during the commercials on 24.  A previous easy button press now requires navigating menus. 

  • Not getting Last year data in query

    Hi All
    i have created one query on cost element cube.i have two col in the query i.e amount(present year) and amount (past year).
    For getting the past year data I have set the offset -12 for the fiscalyear/ period variable in the query i also restricted the fiscal year variant v3 in the amount. but i am not getting the corect value  for the past year . if i run for 2011 and 2010 for the same period i am getting right value in Amount(present year) but if i run the query for 2011 for same period i am not geting right value in amount previous year data. Kindly help me how to  get right data.

    Hi Atul,
    There are certain restrictions when you are reporting over multiple time frames,
    1) You should not put the global restriction of the time period on which you want to display data e.g. 0CALMONTH or 0FISCPER etc.
    you can put the global restriction but it should be at high granularity. for e.g. when you are reporting on Present month and last month then you can put restriction on Year, here you should take care when you are giving input as first month then last month of previous year data will not be displayed untill year is restricted for current as well as previous year.
    Another thing is
    2) You should not put time characteristic in drill down otherwise data aggregation doesn't happen.
    If you want to take any time characteristic input then it should be included in the specific RKF only, though Input ready variables.
    Regards,
    Durgesh.

  • On Comcast home page, I want to see TV Listings, but Firefox will not let me see the listing, Explorer will show the TV Listing, but I do not use Explorer.

    The page isn't redirecting properly
    Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
    This problem can sometimes be caused by disabling or refusing to accept c

    I think this is mentioned in that support article, but just in case:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools menu > Page Info > Security > "View Cookies"
    In the dialog that opens, you can delete your comcast cookies individually.
    Then try reloading the page. Does that help?

  • Rescue address is Knology address which I have not used in years. Unable to change. Cannot remember answer to one of questions.

    trying to uplate reacue address from Knology to Gmail account

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (118961)

  • How do I see a list of all my Apple Mail contacts. I do not use address book. I just want to see all the email addresses stored on my Mac

    Hi All,
    I have been using Mail for the past three years without need to send a regular mailing list mailout.
    I now need to send group emails and all I want to do is browse my contacts aquired over the last three years to create a list. I have not used Address Book for anything other than phone contacts so please do not point me in that dirrection.
    There must be a list of all email contacts stored somewhere on the Mac that I can look through. It is an almost impossible task to do this by browsing my inbox/sent folders.
    Hope you can help and thanks in advance!
    Best
    Adam

    0. find the user id.
        a. log in as that specific user.
        b. run terminal
        c. type "echo $UID"
        d. write down the user id that will be displayed
    1. Go to the finder
    2. go to the user home folder
    3. click the box with the magnifying glass (upper right corner of the window)
    4. type .jpg
    5. a menu will pop under the magnifying glass box, select "jpg image"
    6. click the "plus" sign that's displayed to the right of the word "save"
    7. two pull down menus will appear, select "other" from the first one
    8. a new window will pull down, scroll to "owner" and select it
    9. back in the original window type the user id (a number) to the right of "owner" "equals"
    Hope this helps

  • Getting Last Year in @Range

    I know that using @CurrMbr here is extraneous, however I wanted to make sure it worked.
    @Range(Revenue->Dollars->@CurrMbr("Years"),@Children("Full Year"))
    This returns the specified slice of data for the current year and the children of full year, which are four quarters.
    However, this does not return last year:
    @Range(Revenue->Dollars->@Member(@PrevSibling(@CurrMbr("Years"))),@Children("Full Year"))
    I get the error:
    attempt to cross null member in function
    So how would I return the previous member in years, i.e., last year?
    Edit:
    When I use this:
    Revenue->Dollars->@Member(@PrevSibling("2012")),
    Instead of passing @CurrMbr("Years"), 2011 is passed correctly with PrevSibling. So I'm guessing that @CurrMbr("Years") is probably not returning the right type for the parameter PrevSibling needs.
    Edited by: user12268822 on Mar 10, 2013 6:31 PM

    Hi Marvin,
      For the momento you can't create MDX Dimension, only MDX Measures.
      You can create a variable in WEBI report, for the user perpective looks like a normal dimension.
      If the 0CALDAY.LEVEL01 has the name dimension DATE, you can create a variable using  the formula RelativeDate
    date RelativeDate(start_date;num_days)
    start_date: The start date
    num_days: The number of days from the start date, The num_days parameter can be negative to return a date earlier than start_date
    RelativeDate[Reservation Date];2) returns 17 December 2005 when [Reservation Date] is 15 December 2005.
    RelativeDate[Reservation Date];-3) returns 9 January 2007 when [Reservation Date] is 12 January 2007.
    106
    If you want to use MDX MEasures you can:
    Year To Date= <EXPRESSION>SUM(YTD(@Select(Key Figures\Billed Quantity)))</EXPRESSION>
    Measure on previous Member= <EXPRESSION>(@Select(Key Figures\BilledQuantity), [0CALMONTH].PrevMember)</EXPRESSION>
    Best regards,
       Fede

  • Calculating this month of last year revenue

    Hi,
    i am preparing a new dashboard like below
    month total revenue total revenue of last year (january - 2011)
    january 125.00 120.00
    can you please share your experience how can i do this?

    Hi,
    If you always want to show the previous years data (ie not only last year, but last two/three/.. years) then you can use AGO function in
    RPD.
    Refer for AGO-
    http://gerardnico.com/wiki/dat/obiee/ago
    OR,
    But if you are using for a single last year then in the column formula use - 'January'||cast(year(current_date)-1 as char)
    (If its always January you want)
    Hope this helped/ answered.
    Regards
    MuRam
    Edited by: MuRam on Jun 12, 2012 5:08 AM

Maybe you are looking for