LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

Hi BI Guru's
I have created a WEB interface for BPS in BI ( version 7.0) . But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material.
When I click on "input help" the system open a new window for "Value selection". When I specify the material code, it gives me blank LIST OF VALUES.
But it is working for other fields like Customer, UOM in the same layout.
Please suggest some solution.
Thanks,
Nilesh Labde

hi,
Thanks for the reply.
Master data is avaliable for the Material Code. The problem is in Internet Explorer and not in SAP GUI .
If i run Planning folder for the same layou in SAP GUI it is working fine.

Similar Messages

List of values in an universe or webi rep based in a bex query

Hi ¡
I need to create a list of values in an universe or webi rep based in a bex query, this LOV should be included in a formula used to filter our values when we run we webi rep.
Any clue will be apreciated
thanks

Hi,
which version of BOBJ are you using?
Regards,
Stratos

How to call a BPS Web Interface with predefined selections

Hi,
I have read and try to implement the "How to... call a BPS Web Interface with predefined selections" but it is not working.
I have one Web Interface called ZXXXXX, then I created one BSP and copied the ABAP code into the Layout screen.
I checked the ABAP and it concatenates and fill the variable l_url, but the page is not displayed.
l_url = /sap/bc/bsp/sap/zxxxxx/zxxxxx.htm
I have checked that I have no errors in the BPS variables and its values.
It just opens internet explorer and the page displays "<<<" in the top of the screen.
I am working with BW7.0 and BPS 3.5.
If anyone can help me it will be rewarded,
Thanks a lot,
Fernando

I think the problem is in the last part of the code.
<frameset framespacing=0 frameborder=0 border=0>
<frame src="<%= l_url%>" name="x" framespacing=0 frameborder=0 border=0
marginwidth=0 marginheight=0>
</frameset>
It is doing nothing in this point, but the ABAP fills correctly the l_url variable.
Thnks

BEx Web Applications in BPS Web Interfaces

Hi all,
I need to make a BPS web interface which enables the business user to see data in the BW system while posting the budget items in BPS. This is to be done in the Web, and I have therefore tried to implement a solution for the customer following the instructions in the HowTo-paper: "How To.... Integrate BEx Web Applications into BPS Web Interfaces".
The report is displayed when the interface is executed, but the variable which I have included in the code does NOT have any effect on the BW query (which is a surprise to me) but rather only on the BPS Web Interface (which is no surprise to me).
The above results in two questions:
- What part of this code needs to be changed for the variable to take effect on the BW query as well as the BPS Web Interface:
<iframe
    id="BWReport01"
    name="BWQUERY"
    src="/sap/bw/BEx?
    cmd=ldoc&TEMPLATE_ID=ALLOK_CHECK2"
    width="1200"
    height="600">
    Frames are not supported
</iframe>
<script language="JavaScript" type="text/javascript">
    var frame = document.getElementByld( 'BWReport03' );
    var url    = '/sap/bw/BEx?cmdldoc&TEMPLATEID=';
    var filter = '&FILTER_IOBJNM=0PROFIT_CTR&FILTER_COLLAPS=&FILTER_VALUE_EXT=';
    var '1000/' = '';
    var appl   = 'ALLOK_CHECK2';
    var varvl = '%=descr(VarvlSel1_pctr/value)%>';
    var convert = /$(.*)$/;
    convert.exec(varvl);
    if ( RegExp.$1 != "") varvl = RegExp.$1;
    url = url + appl + filter + comp + varvl;
    url = url.replace(/ /,"");
    frame.src = url;
</script>
Particular areas where I am in doubt (in squared brackets):
[ var '1000/' = ''; ]
[ var convert = /$(.*)$/; ]
- has anyone had any experience in using the Selector Package (SEL_PACKAGE) rather than the Selector Variable Value (SEL_VARVL)? In case you have, how is it implemented in the HTML-code?
Looking forward to hearing from you guys soon.
Best regards
Rune Rygaard

Hi Rune,
Here's what I found - I'm not sure it will solve your problem, but maybe it can give you some hints:
<b><iframe
id="BWReport01"
name="BWQUERY"
src="/sap/bw/BEx?
cmd=ldoc&TEMPLATE_ID=ALLOK_CHECK2"
width="1200"
height="600">
Frames are not supported
</iframe></b>
I think the section above in bold has to be deleted and replaced by the one specified in section 3.3 of the how to paper: <iframe id=BWReport03" name="BWQUERY" src="/sap/bw/mime/....</iframe>. The reason is the your defintion will display the report, but will not take any variables into consideration.
Furthermore you're missing a '=' in your code (cmd=ldoc) - I marked it in bold below. What you could also do was to add an alert to display the URL generated by the javascript. I added that in bold as well. That can give you an idea of whats missing.
Hope this helps,
Jacob Lund - DK :o)
<script language="JavaScript" type="text/javascript">
var frame = document.getElementByld( 'BWReport03' );
var url = '/sap/bw/BEx?<b>cmd=ldoc</b>&TEMPLATEID=';
var filter = '&FILTER_IOBJNM=0PROFIT_CTR&FILTER_COLLAPS=&FILTER_VALUE_EXT=';
var '1000/' = '';
var appl = 'ALLOK_CHECK2';
var varvl = '%=descr(VarvlSel1_pctr/value)%>';
var convert = /$(.*)$/;
convert.exec(varvl);
if ( RegExp.$1 != "") varvl = RegExp.$1;
url = url + appl + filter + comp + varvl;
url = url.replace(/ /,"");
<b>alert (url);</b>
frame.src = url;
</script>

Integrate WAD 7.0 Template into BPS Web Interface

Dear all,
We recently migrated to BW 7.01. We have an existing planning application running as a BPS Web Interface.
I now want to integrate a query output (data and chart) by using a web template designed with WAD 7.0 into the existing BPS web interface. I know how to do this with a web template designed with WAD 3.5. There is also a How-to paper available that explains it for 3.5. I'm struggling now to do the same with WAD 7.0. The syntax for the URL generation changed, that's one problem. There maybe more when actually calling the web template from the web interface(?).
I found some threads here in the forum dealing with this issue but no clear solution. Some posts even mentioned that integration of 7.0 web templates into BPS web interfaces is not possible at all. I would appreciate any information on this issue.
Thanks in advance!
Regards,
Ulrich Meier

Hello Ulrich,
the 7.0 web templates run on your BI Java server which has a different host name (and port) than you BW ABAP server which run the BPS web interface. The servers are different in Dev/QA/Prod so you need to generate the URL dynamically.
One way is to hardcode it in JavaScript. Something like: if CurrentDomain = ABAPDevDomain. Domain = JavaDevDomain. if CurrentDomain = ABAPQADomain. Domain = JavaQADomain. etc
A fancy alternative would be to put the Java domain and port into an exit variable which you could include in the BPS web interface (in a hidden DIV tag for example). Fill the exit variable using function RSWR_GET_DEPLOY_PORTAL_INFO. Then your JavaScript can pick up this value to generate the proper URL for the web template.
Regards,
Marc
SAP Techology RIG
PS: Posting JavaScript directly is limited for security reasons (certain JS keywords are not allowed). You can put your JS into a text file and attach it to your posting.

BPS Web Interface don't show multiple documents for each cell

Hi gurus,
I have an issue... we are trying use text documents from BPS on the WEB interface. Everything works fine, I can input text documents on each cell on the web, and from Query as well.
I saved several other documents from the query for the very same cell, and I can see these other documents from BPS itself or from the Query by clicking on the title... but on BPS WEB interface, it shows only the last text document saved.
Is there anything wrong on the configuration, or is it possible for the WEB interface to show the titles so that the user can choose which document he wants to open?
Thanks in advance,
Chen

Hi Luke,
did you check whether the document attributes are generated for your Characteristics?
AWB -> Documents -> Administration -> Generated Properties
There is also a SAP Note 431126, which you might want to consult.
Regards,
Eric

Open Bex workbook from BPS web interface,How hard it could be?

Hi all,
    I want to add a link or function-button in my BPS web interface,hope it could open a query(excel analyser),I tried 2 methods as follow:
   1. MIME , It can only open a static excel file, not a analyser query. I gave up this method.
   2. I use the program RRMX_START_EXCEL and add a plan function which is a EXIT in BPS0,in my EXIT function I used some code in RRMX_START_EXCEL,I test it in BPS0 ,it works ,it can open a analyser excel query.But when I put this plan function(including a parameter group ) in BPS_WB ,when I click the function-button in web interface, it crashed,says:
Error when processing your request
What has happened?
The URL http://bw1.:8000/sap/bc/bsp/sap/zwebcaxa001_998/page1.htm was not called due to an error.
The termination type was: TH_RES_FREE
and some other Error infomation,
Is it possible to realize my requirement? or Web interface and analyzer are just 2 total differrent things ,it is not possible to realize this?
thanks all

Hi Denny,
Have a look at www.javascript.internet.com and do a search for "whatfile".....
This should give you the javascript code whereyou can enter a file name (say an excel file name) and click a button to navigate to it.
Although I have not tried exactly what you have asked, I have successfully used parts of this code to open specified files (excel files) on our local directory from a BPS planning web page.
Obviously you will need to adapt the code to your specific evironment/situation...
Good luck.
Rael

Web interface layout u2013 Standard refresh button

Hi there
In our web interface layout, we have got a button which has the label <%=otr(UPWB/REFRESH)%> .
This looks to me the standard Refresh button. When we click on this button it actually save the data in the database.
Is that what the refresh button suppose to do.
Any suggestion/advise will be greatly appreciated.
kind regards
Sarah

Hi Sarah,
it seems that the wrong OTR text was assigned to the 'save' button. <%=otr(UPWB/REFRESH)%> belongs to the submit button that only sumits the data to the server to update the plan buffer. So check in transaction bps_wb whether the correct button was used in the web interface.
Regards,
Gregor

List Of Values not getting displayed in BI launchpad

Hello All,
When i am running the report in BI launchpad, List of values are not displaying . throwing below error.
Detail Error:
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: while trying to invoke the method com.businessobjects.mds.olap.protocol.bics.BICSClient.getCube() of a null object loaded from field com.sap.sl.proxyconsumption.services.olapaccessservice.BICSDiscoverServer.bicsClient of an object loaded from local variable 'this'
@The same report is working fine in WEBI Rich client.
I am using 4.1 SPO3 Patch 2
Please Help on this.
Thanks,
Ramesh

Hi,Supriya!
We are having problem looking like that (After report had been made if I click Refresh button and wait for Values for prompts - the same error message appears).
My user is in admin group and if log as Administrator - nothing changes.
Could you give me advice?

InfoObject Text not displaying in BPS Web

Hi Gurus,
We are using a custom InfoObject attribute only characteristics (Only text table). We are using this object in BPS planning. When we launch the BPS_Web and drilldown on this Object, it just shows us the technical value, not the text. We would like the drilldown to show only text. I tried to change the Business Explorer properties for display 'Text'. However it is not helping us.
Please let me know if you have encountered any issues?
Thanks!

Check to see if the table- RSDCHABAS has the entries for the custom infoobject
Short text exists = X
Med-length exists = X
Long text exists = X
populated..
In reply to my previous posts are the std.business content iobjects able to display TEXTS needed??
Hope it helps
Chetan
@CP..

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Values not getting refreshed in web report.

Hello Friends,
Currently i am running an web report. The scenerio is i have check box with 5 options For Ex: IMS , IMR, IMN,IMM,IMP.
IMS is the combination of all divisions and IMR is the combination of only three divisions.
In BEx we runthe report with divisions . For ex : divisions are Ind1, ind2,ind3,ind4,ind 5.
Instead of displaying divisions in the select options like Ind1,ind2....etc., we have created a structure in the report
and using new selection we have restricted the divisions with IMS,IMN,etc.,
IMS->combination of all divisions. IMR is combination of ind1,ind2,ind3.
IMN... all are with single divisions
Now we have assigned the query in the data provider for select options in hte web report,
But when we select any options the values of the remaining queries are not getting refreshed.
If we use the divisons directly with out using the structures the values are getting refreshed.
Can any one give me the solutions for this?
Regards
Srinivas

Hi Mansi,
Check the Prompt properties in the Edit Query window of the webI. In the query filters section of window, click on the blue icon which says Prompt Properties. Deselect Keep Last values select and run the webI again.
If the solution is not related to your question, please provide more details.
Thanks,
Rajesh

List of values not properly working in the selection screen.

Dear Mates,
In BEx query all the selection parameters are working and showing all the list of values. Created the same report in crystal from BEx query, for one particular selection it is not showing the list of values or drop down. Just showing "DISCRETE VALUES"
Please throw some light on this.
Good day,
Regards
Arun S

Hi Arun,
I think you have more than one dynamic parameter created in your report. There is a limitation on dynamic parameter list of values. You will have to edit the registery to get all values in dynamic parameters list.
Find below is a knowledgebase article ;
Symptom
For performance reasons, in Crystal Reports XI Release 1 and Release 2 the maximum number of values that are returned for a list of values is set to 1000. If you have a cascading List of Values (for example Country > Region > City), the lowest level (in this case City) will only display a maximum of 1000 values. This means that the higher-level prompts may display far fewer values than you expect. The list of values provides the data for the dynamic parameter list.
How can you modify the maximum number of values available in a dynamic parameter list?
Resolution
To increase the maximum number of values available in a dynamic parameter list, you must add a registry key.
CAUTION
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe).
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
Crystal Reports XI Release 1
Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV.
NOTE
Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV key.
Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter. NOTE: The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
NOTE
The higher the number of values is, the longer it will take the Enter Values dialog box to populate with values.
After making changes to the registry, restart the affected service or application as required.
Crystal Reports XI Release 2
Create a registry key HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV.
NOTE
Alternatively, you can create the registry key HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV and that key will override the settings of the HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV key.
Add a string value "MaxRowsetRecords" and set the value to the maximum number of values that you desire for your report. For example, a value of 2000 will return up to 2000 values in the lowest level of a cascading parameter.
NOTE
The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
After making changes to the registry, restart the affected service or application as required.
Thanks,
Sastry

Virtual Characteristic value not populating in the query output

Hi Experts,
I am new to BAPI and I am using this to populate the values of virtual characteristics.
I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
The below is the compute method of my implementation class.
FIELD-SYMBOLS :
<fs_0cs_order> TYPE ANY,
<fs_zww_teco> TYPE ANY,
<fs_status> TYPE ANY.
if p_cha_0cs_order > 0.
ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
endif.
if p_cha_zww_teco > 0.
ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
endif.
Select single /BIC/ZSYSTATUS
    from /BI0/PCS_ORDER into <fs_status>
   where CS_ORDER = <fs_cs_order>.
if <fs_status> CP 'TECO'.
<fs_zww_teco> = 'Y'.
else.
    <fs_zww_teco> = 'N'.
endif.
But I am not sure why the values are not populated. But when i debug , i could see the values for
P_cha_0cs_order = 35
p_cha_zww_teco = 54
But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
Can you please guide where i am missing ...
Thanks
Vamsi
Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

Hi Sushant,
RSRT --> Enter Query Name
Click on Technical Information --> If " Virtual Char./Key Figures " = Y
In my case , even then i clciked generate report,
even after that P_CHA_0CS_ORDER = 35
and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
Can you please guide me .
Thanks
Vamsi

Value not populating in the print out (sales order) for the 1st time

Hi friends,
While saving a sales order, the order confirmation going to the user is not populating the LDC field. LDC is Last date of change. This field can be found in the Additonal data 2 tab of the material in the sales order. When I enter a date in this field and save, the print preview of the output has this value, but the print out does not carry this value.
Another weird thing about this issue is that, the second time i trigger the output, the print out has the value.
Please give me some clue on where to check and how to go about fixing this problem.
Regards,
Shanu.

Dear Shanu,
This issue may be related bug in the output program so take help of ABAPer to fix the issue.
I hope this will help you,
Regards,
Murali.

LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

Similar Messages

Maybe you are looking for