List pulling data that does not match set parameter

I have created a template and a list in Marketing that I have set to pull based on a particular date range and flag (Y or N). But when I run the list, I get some records that fall out of the data range and some records that have a 'N' flag even though I set the parameter to only pull 'Y'. Most of the records are correct but there are some that are not. Has anyone else experienced this?

Similar Messages

Binding a JSF table to a list of data that does not come from a database

Retrieving data from a database I can just use the jDev wizard to "Create EJB from table" and bind the EJB to a JSF table through a NamedQuery.
However, in this instance I am retrieving a list of data from an existing API or a WebService.
Does anyone have a good example of how best to do this?

Hi There,
I have make change as you suggested in your post.
But I am getting error that "org.apache.jasper.el.JspPropertyNotFoundException - /presale.jspx(86,56) '#{saveData._nameList}' Property '_nameList' not found on type dbtransaction.SaveData"
Where list is nameList which simply fetch data from Database and send it to the table
Here is my jspx code.
<tr:table var="row" value="#{saveData._nameList}">
                              <tr:column>
                                   <f:facet name="header">
                                        <tr:outputText value="Name" />
                                   </f:facet>
                              </tr:column>
                         </tr:table>
I have just create one ArrayList object in Backing bean i.e. nameList and put getter setter functions for it.
Please help me out for this issue.
Thank You,
Navnath

Query for Old Data that does not match New Data within a given time period

Hello all,
One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
Warm Regards,
Yasmin E. Alberto
HRIS Analyst
[email protected]

Hi, Yasmin,
In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
AND ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
You've probably noticed that this site likes to compress white-space.
To post formatted text (such as table results or indented code) type these 6 characters:
(small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks

I don't know that you can purchase in one country and use it in another. Try contactoing Adobe support thru chat:
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

How to map a url that does not match with the context root ?

does weblogic support url that does not match the context root ?
ex. the context root is AAA. the welcome page can be
retrieved using http://localhost:7001/AAA
Can it be configured to use http://localhost:7001/BBB to bring up the index.html in context root AAA ? if so, how ?

I agree with Imp68.
It still amazes me that in 2014 so many web sites are still not standards-compliant and instead insist on sniffing for the user-agent. And, in the majority of cases, I've found that the websites work fine with any modern browser.
phardell,
To be clear, Safari is not the problem, the website is! The developer of this website is still living in the 1990s and needs to move forward with the times. Imp68's suggestion will cause Safari to "pretend" to be whatever browser you wish. Try choosing "Safari 7" if that worked for you in the past and the website will likely go back to working. If that does not work then try choosing "Internet Explorer 10" from the menu and see if that works.
No matter what the result, you should look at the bottom of the page for a link to report problems with the website. Submit a comment that tells them that they need to "modernize your website to support all modern web browsers".
Good luck.

After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

Did you purchase the software in another country than where you live?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What I can do?

Install maverik on my MacBook Pro, I had no problem. Two days later I was shut down suddenly and reboot with a closed padlock and asking me for a password that does not match any of mine. What can I do?

Try booting to the Recovery drive, running Disk Utility and Repair disk and Repair Permissions.
1. Reboot and immediately hold down command and R (two keys).
2. When you see the screen shown on this page, select Disk Utility and continue.
3. When DU is running, select the hard drove on the left, First Aid and Repair Disk.
4. After Repair Disk, click Repair Permissions.
Quit DU and restart.

"This card was purchased in a country that does not match your Adobe ID"

I bought a creative cloud plan from 500px, but when I try to redeem the license code I get the following message: "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help".
500px did not sell this to me as a product which could only be used in the USA.
This question has been posed previously - suggestions include changing the country associated with your adobe ID. However I have doubts as to the legality of this as why else would this restriction be in place if it were not for tax reasons.
Any suggestions would be most welcome.
muster_mark

https://forums.adobe.com/thread/1568798 about 500px problems

Clean-up all data that did not match with the selection.

Hi Everyone,
In my requirement I need to Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
Pls suggest me...

Hi Meenakshi
Try delete lt_cdpos where kunnr NE KUNNR (from selection screen) .
Before Checking <condition> make sure both comparing field type match with each other.
You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
Regards
Parveen

Just bought CC and have license key. When I try to redeem it says "This card was purchased in a country that does not match your Adobe ID."

Just bought CC and have license key. When I try to redeem it says "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." anyone have any ideas?

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-ID support http://helpx.adobe.com/x-productkb/global/service-c1.html

This card was purchased in a country that does not match your Adobe ID. You can try signing in with

This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help.

Hi Debbyw01,
Unfortunately we can't change the country associated with an Adobe ID but have the following options:
- you can create a new Adobe ID with the country using a different email address
- if you'd prefer to use your current email address please contact Adobe http://helpx.adobe.com/in/contact.html who can assist you to
make a change to your existing ID that will allow you to create a new ID with the original email address.
Please let us know what you'd prefer.
http://forums.adobe.com/thread/988634?tstart=0
Regards,
Rajshree

DBD::mysql object version 4.013 does not match bootstrap parameter 4.005

The issue is with XServe running 10.6.2.
Out of the box Perl doesn't come with DBM::MySQL module installed. To be able to install it, I first had to download MySQL libraries (instructions and link to the file are here: http://support.apple.com/kb/HT4006 ).
After that I was able to install (manually with "make") the latest module DBD-mysql-4.013 which Perl now acknowledges. However, when module is called, following error is thrown:
"install_driver(mysql) failed: DBD::mysql object version 4.013 does not match bootstrap parameter 4.005 at /System/Library/Perl/5.10.0/darwin-thread-multi-2level/DynaLoader.pm line 230.
Compilation failed in require at (eval 3) line 3."
Suspecting that Perl is looking for a 3-year old version 4.005, I did try removing 4.013 and installing 4.005 instead (as I couldn't find any other clear solution) but 4.005 failed to pass "make test" - not very surprisingly as it is that old - so I chose not to try installing it and put 4.013 back in and still got same error.
If somebody could kindly provide/direct me to clear instructions to resolve this problem your help will be much appreciated! Thanks in advance.

Unfortunately, I didn't document right away what I did to get this resolved but this is what I remember. This is a hack, I found a suggestion online that lead me to this. However, a FAIR WARNING - this is dangerous for the system.
I went into the module file mysql.pm located here:
cd /Library/Perl/5.10.0/darwin-thread-multi-2level/DBD
vi mysql.pm
I commented out the line that specifies version of the file, 4.013, and put 4.005 line instead:
#$VERSION = '4.013';
$VERSION = '4.005';
If server is not rebooted, this doesn't change anything, error will still be thrown. So I rebooted the server from command line.
This reboot did not go well, server went into some kind of intermediate state, I lost web access. We had to do a hard reboot by cycling power physically on the server itself. After that server came back up, log was full of all kinds of errors. Now all of a sudden the error "object version 4.013 does not match bootstrap parameter 4.005" wasn't thrown anymore. Apparently, version of this module is not read from the module .pm file itself every time module is called, it is instead stored somewhere else and is looked up there, wherever "there" may be. I suspect one of the files used during boot got confused when version number didn't match and it caused chain reaction and a bad reboot.
Later on I went back into the file and changed version number back to 4.013 as it is supposed to be, and commented the other line out:
$VERSION = '4.013';
#$VERSION = '4.005';
MySQL on Perl functioned fine since then.
Server has been rebooted weeks later during 10.6.3 upgrade and this time it didn't cause any problems with the module. Still works.

Compare data and output data that does not exist

Hello,
i wrote a procedure to insert the data into a 3rd table where i compare the data between two tables, if it matches it shouls insert into the test_a table. if the does not exist either one of the tables i.e. test_code and test_type it should output that data where it doesn't exist. my code works for only one table i.e. test_code. its not dbms outputing a row that is not in test_type table. could any tell my why?suppose if test_code a row that is not in test_type it should output saying this row mismatches with test_type and vice versa.
--here is my code
CREATE OR REPLACE PROCEDURE test.GET_data
IS
BEGIN
DELETE test.test_a;
FOR c IN (select a.cCODE ,
a.type,
a.indicator,
rtrim (xmlagg (xmlelement (e, a.codenum || ',' )order by a.codenum).extract ('//text()'), ',') codeNUMber,
b.ccode cc,
b.type tp,
b.indicator ind
from test.test_code a, test.test_type b
where a.ccode = b.ccode(+)
AND a.type = b.type(+)
AND a.indicator = b.indicator(+)
Group by a.ccode, a.type, a.indicator, b.CCODE,b.type, b.indicator
order by a.ccode)
LOOP
BEGIN
IF (c.cCODE = c.CC
AND C.type = C.tp
AND C.indicator = C.ind
AND C.SYS_IND = C.SYSIND) THEN
insert into test.test_a (CCODE, type, indicator)
values (C.cCODE, C.type, C.indicator);
ELSE
dbms_output.put_line('Rules Problem For cCODE: ' || C.cCODE);
     dbms_output.put_line('type: ' || C.type);
     dbms_output.put_line('indicator: ' || C.indicator);
dbms_output.put_line('Rules Problem For CC: ' || C.CC);
dbms_output.put_line('tp: ' || C.tp);
dbms_output.put_line('ind: ' || C.ind);
END IF;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Rules Problem For cCODE: ' || C.cCODE);
     dbms_output.put_line('type: ' || C.type);
     dbms_output.put_line('indicator: ' || C.indicator);
dbms_output.put_line('Rules Problem For CC: ' || C.CC);
dbms_output.put_line('tp: ' || C.tp);
dbms_output.put_line('ind: ' || C.ind);
END;
end loop;
commit;
END;
Thanks

You need to use a FULL OUTER JOIN instead an OUTER JOIN for that.
Just curious, why do you need to use dbms_output instead of running the SQL query with additional conditions (the if part of your procedure)?. You can use it twice, one to insert the ones that match, and one for selecting the others that do not match.
Regards.

Indesign cc 2014 displaying font that does not match font specified

Not on all fonts but with, in my case, when I specificy Meta or Futura, indesign displays times new roman - it says the font is available and that the font is installed but the displayed font does not match.
Have reinstalled font explorer pro plugin, restarted computer, indesign and font explorer to no avail. I have also switched off nearly all my fonts to check if there is a font clash - no fix………..

Do a search for adobfnt*.lst files and delete all of them that have two digits in place of the *. On Mac, also run a utility that can clean the font caches (FEX may be able to do this, but if not, Cocktail, among others can, or I think you can do it through Terminal).

List pulling data that does not match set parameter

Similar Messages

Maybe you are looking for