Listener fails when not connected with network .

Hi ,
this again same old problem of listener.
I have installed oracle 8 on my home pc RUNNING WIN2000 SP 4.
The listenet runs fine when I am connected to the internet through dialup CONNECTION but fails when I am not connected .
I donnt have a network adapter with my pc.
How caN i run listener on a stand alone system ?
the computer name is kabilpc
Following error is spitted when I give start command from LSNRCTL80
System parameter file is d:\orant\NET80\admin\listener.or
Log messages written to d:\orant\NET80\log\listener.log
Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\O
Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\E
Listening on: (ADDRESS=(PROTOCOL=nmp)(PIPENAME=\\KABILPC\
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=392)(HOST=127.0
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=404)(HOST=127.0
Attempted to listen on: (DESCRIPTION=(CONNECT_TIMEOUT=10)
(HOST=127.0.0.1)(PORT=1520)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown system error
THE FOLLOWING IS THE CONTENT OF LISTENER.ORA
# D:\ORANT\NET80\ADMIN\LISTENER.ORA Configuration File:d:\orant\net80\admin\listener.ora
# Generated by Oracle Net8 Assistant
PASSWORDS_LISTENER= (oracle)
LISTENER =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = ORCL))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS = (PROTOCOL = NMP)(SERVER = KABILPC)(PIPE = ORAPIPE))
(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 9999))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1520))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = kabilpc)
(SID_NAME = ORCL)
(SID_DESC =
(SID_NAME = extproc)
(PROGRAM = extproc)
THANKS
K.M.DHALI

(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT =1520))Are these two entries not one and the same? Could you get rid of one of the entries and try.

Similar Messages

Java web server error when not connected to network

If my laptop is not connected to a network, when I execute the java web server, it fails at start up with the exceptions listed below. When debugging, I need access only to local host, so it seemed reasonable to me that the web server should execute in the absence of a network.
I just found that I get the same failure, if I'm connected to the network via a dialup connection.
Any ideas on how to configure my system so that the web server will function in the absence of a network connection?
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\>j2ee -verbose
J2EE server listen port: 1050
org.omg.CORBA.INTERNAL: minor code: 1398079697 completed: No
at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:
253)
at com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIOPImpl.java:202
at com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(GIOPImpl.java:1
37)
at com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(POAORB.java:48
4)
at com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(POAImpl.java:144
at com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.java:102)
at com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB.java:109)
at com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.java:127)
at com.sun.corba.ee.internal.core.Future.evaluate(Future.java:23)
at com.sun.corba.ee.internal.corba.ORB.resolveInitialReference(ORB.java:
2159)
at com.sun.corba.ee.internal.corba.ORB.resolve_initial_references(ORB.ja
va:2110)
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:192)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP
ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:202)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP
ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:202)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP
ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:347)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
J2EE server reported the following error: Unable to create ORB. Possible causes
include TCP/IP ports in use by another process
Error executing J2EE server ...

Has anyone else ever seen this failure?

My iphone does not connect with network extender

my ihpne 6 does not get connected via my network extender.

Make sure any Advanced Calling features are turned off. The network extenders will not work with phones with AC enabled.

MBP increasingly slower when not connected to network

When connected to the network at work (either through WiFi or ethernet cable) my macbook pro works OK. However, when I am travelling or take my MBP home performance starts degrading to a point where launching something like Dictionary can take 15-20 seconds.
I get a spinning beach ball when launching or closing applications, as well as when saving files. Typically when disk operations are involved.
Originally, after reading some posts in this forum, I thought that it was a hard drive problem. However, I have used the tools that come with the installation disk and disk warrior showing no problems. In addition, the problem always sort out itself after rebooting while connected to the network at work.
Trying to find the missing network could be a problem, but going through the logs in console I can not find anything like that. The other issue is that performance degradation compounds with time since being connected to work. I can' figure out a reason for this.
Any suggestions pointing to a solution are most welcome.
Macbook Pro Mac OS X (10.4.9) 2GHz, 1.5GB RAM

After playing for a while with the computer I think that I have at least found where the computer is wasting all this time.
Using Console and checking system.log, I found several instances of "DirectoryService[46]: Active Directory: Could not determine closest Domain Controller from Site information in directory". I did use "sudo killall -USR1 DirectoryService" in Terminal to send debugging information to /Library/Logs/DirectoryService/DirectoryService.debug.log.
Here I can see that every time I have a delay, the computer spends 25 seconds trying to reach a LDAPv3 server at work. So, it seems to be a misconfigured network problem, which I hope to sort out tomorrow.
Macbook Pro Mac OS X (10.4.9) 2GHz, 1.5GB RAM

AD mobile users have no permisssions when not connected to network

I am the IT Manager in a Windows Server 2003 shop using Active Directory. I am trying to integrate a MacBook just purchased with Leopard 10.5.2. The computer is sucessfully bound to the AD domain. I created a local user account on the machine, and while connected to the company network, an active directory user. When the AD user logs in and the machine is connected to the company network, all is fine: the user's home directory is automatically connected and all application prefs and local folders are available.
However, when away from the company network, loging in with the mobile user's credentials gets a desktop, but no permissions to that user's own local folders:no Dock prefs, no documents folder, no downloads folder, no nothing. Only internet access if a connection is available. Suppossedly credentials are cached on the MacBook, as that option was selected when I created the account. Is this behavior correct?
Thanks in advance.

tmoore41 wrote:
Ok, I'll give it a try just to see what happens. I am not sure that this is such a good solution however:
1) I am not sure that I have permission to redistribute deployJava.js with my project. What is the license for it? When I download the script it has been stripped of all comments.Good question. I had to chase up the webmaster of mindprod.com to alter his pages to reflect that the preferred method was to hot-link to Sun's own script. It never occured to me to question that Sun might not allow not hot-linking to the script. Now I go looking over their documentation on the script, it is not really clear.
The documentation I was looking through, can be found at the [Java Rich Internet Applications Deployment Advice|http://java.sun.com/javase/6/docs/technotes/guides/jweb/deployment_advice.html] page.
2) How can I ensure that the installation methods will be kept up to date If I 'hard code' the deployment methods by distributing them myself? You can't. That is one downside of using a copy of the script.
.. Are there specific version dependencies within the deployJava.js script that need to be updated once in a while? Not that I know of. Though Sun might upload changes to correct bugs in various browsers.
I am guessing that one of the design elements of the 'deployJava.js' script is that since it is on a sun server it can be kept up to date over time. This cannot happen once it is frozen in to my distribution.Well summed up.
It would be nice if deployJava.js checked if the java install was adequate, and if not then went out to the network to get instructions on what to do next. It is too hard for me to tell what is going on in the whitespaced-stripped file however. Any internal documentation on what deployJava.js does?See what you can figure from the link above, and related documentation.

Installing xMII on Laptop not connected with network

Hi,
I have installed xmii in my laptop and created some application which i sent permission to a user created by myself.
When i try to unplug the laptop from the network and try to access xMII its directly going into the home page without asking login. I want a specfic user to be logged in and role it displays in the xMII main page as Local Adminstrator not the Role which was there in xMII.
Thanks,
Bala

look at the list of Trusted Servers in Security Services. If you log in from any of these, you will automatically be logged in as admin. It doesn't matter if you use the hostname or IP. If you find your IP listed as one of the Trusted Servers, remove it, save, and open a new browser window and try logging in again. You need to start a new browser session - not open another window in an existing session.
If you need to have your machine listed as a trusted server and you don't want to be automatically logged in as admin, then you're out of luck. I've tried using the loopback adapter to get around this; in Windows that won't work either because of the braindead way Microsoft implemented the loopback adapter. Your only recourse is VMware or the like...
-tim

Imported Photos when NOT connected to network drive is missing

I connect to external disk drive for my photos.
But when I wasn't connected to the drive, I imported photos just fine - was able to see them all (the just imported one). I could see "blank" thumbnails for the network photos (because I wasn't connected).
Next time I connected to the external drive, the photos i just imported, when I wasn't connected was missing?
ANY HELP? PLEASE? THANKS.

daveyd_00
Welcome to the Apple Discussions.
My guess is you have two libraries. One is on the external, has all the older pics, the other has the new additions.
To find the other, go to the Finder Go Menu -> Go to Folder and type in /Volumes/The Name of Your External HD...
Can you see the opther library there? If so, drag it to the desktop, and then use iPhoto Library Manager to merge the libraries.
Regards
TD

Slow Finder startup when not connected to network

I use a Linksys BEFW11S4 router/WAP for my home network. The Linksys connects my iMac (ethernet), iBook (wireless) and an Airport Express. I decided I would control my son's access to the internet by using the Linksys router software, which is password-protected, to enable or disable the network connection.
However, I'm finding that when the network connection is disabled, the Finder loads very slowly upon startup. The dock appears fairly quickly, but a color pinwheel spins for a couple of minutes before the Finder menu bar, desktop file and volume icons and any windows I've left opened appear on the desktop. When the network connection is enabled, startup occurs normally . This situation occurs whether I'm on the iMac or the iBook.
Does anyone know a reason for this behavior?
iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB Mac OS X (10.3.9)

I talked to Linksys technical support, and they told me this behavior was normal. As long as my computers are connected to the router, they will hunt for an Internet connection on startup. (I found this was true even when I physically disconnected my DSL modem from the outer.) It seems that the lengthy delay in getting the Finder loaded is unavoidable in that case. Good work, Jase!
iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB Mac OS X (10.3.9)

My iPad was stolen how can i find it if it not connect with network?

help me please

1. You need Find My iPad
2. iPad must be on and connected to the internet
Note: You can't track it if it is off

I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network. I reset both my wifi and my ipad and I still get the same error.

I've had my IPad 3 for awhile and had no problems with it. The other day I went to connect to my wi-fi and it told me could not connect to network. It recognizes my wi-fi but won't connect. I have shut off my wi-fi and still the same problem. Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network. What is wrong

Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

Hello krosebear,
Thank you for using Apple Support Communities.
If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
Regards,
Jeff D.

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

WIFI and mobile data connections not connecting with any other outside WIFI networks. Bluetooth not working in car. Any solution?

After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.

Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-...

P2035n not connecting to network, it show on it, but try to connected and it fail

p2035n not connecting to network, it show on it, but try to connected and it fail. it was working for a day then cant connect to it no, even after reinstalled. it looks like the printer is shut out.

I had the same problem with my iphone 4S. I paired it to a Bluetooth device (Bose Sound speaker) and accidently "forgot" the device. After that I couldn´t pair it again, not could I connect it to my Time Capsule, it said the password was incorrect. However, both devices worked perfectly with another iphone and my mac. I tried resetting network settings, the phone, the wifi connection, but nothing worked. Eventually I ended up restoring my iphone, backed it up to the latest backup, and BINGO! everything works!!! Good luck!!!

Why iPhone 4 does not connect with the charger or mac but charges when it is powered off and connected?

My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?

I hope you are having a great and sorry to learn that you are having this issue;
Since I could not check what version of the laterst firmware, I hope you don't mind doing the following in your printer:
Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
Touch Settings . The product control panel displays the Settings menu.
Touch Product Updates .
Touch Check for Product Updates Now .
Wait for any updates to download and run.
If you using Win XP or later please run this tool to see if you get any errrors Click here
Is your printer on warranty? if you do not know you can use this tool; GO HERE.
Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Listener fails when not connected with network .

Similar Messages

Maybe you are looking for