Java web server error when not connected to network

If my laptop is not connected to a network, when I execute the java web server, it fails at start up with the exceptions listed below. When debugging, I need access only to local host, so it seemed reasonable to me that the web server should execute in the absence of a network.
I just found that I get the same failure, if I'm connected to the network via a dialup connection.
Any ideas on how to configure my system so that the web server will function in the absence of a network connection?
Microsoft Windows 2000 [Version 5.00.2195]
(C) Copyright 1985-2000 Microsoft Corp.
C:\>j2ee -verbose
J2EE server listen port: 1050
org.omg.CORBA.INTERNAL: minor code: 1398079697 completed: No
at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:
253)
at com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIOPImpl.java:202
at com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(GIOPImpl.java:1
37)
at com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(POAORB.java:48
4)
at com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(POAImpl.java:144
at com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.java:102)
at com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB.java:109)
at com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.java:127)
at com.sun.corba.ee.internal.core.Future.evaluate(Future.java:23)
at com.sun.corba.ee.internal.corba.ORB.resolveInitialReference(ORB.java:
2159)
at com.sun.corba.ee.internal.corba.ORB.resolve_initial_references(ORB.ja
va:2110)
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:192)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP
ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:202)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP
ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:202)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP
ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(../../src/share/com/sun/ente
rprise/server/J2EEServer.java:347)
at com.sun.enterprise.server.J2EEServer.main(../../src/share/com/sun/ent
erprise/server/J2EEServer.java:901)
J2EE server reported the following error: Unable to create ORB. Possible causes
include TCP/IP ports in use by another process
Error executing J2EE server ...

Has anyone else ever seen this failure?

Similar Messages

  • EAS server error: Could not connect to administration Server

    Hi,
    I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
    "Server Error: Could not connect to administration server".
    I tried accessing the same through the web URL and I found "404 error - file or directory not found".
    I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
    The log retireved from the HyS9eas-sysout.log file is below:
    <Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
    <Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
    EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
    Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
    Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
    BPMUI shared webapp not referenced from EAS#11.1.2.0
    Application name: EAS#11.1.2.0
    Application source: eas.ear
    Server name: EssbaseAdminServices0
    Server port: 10080
    Server SSL port: 10083
    Application context: eas
    Registry product type: ESSBASE_PRODUCT
    Registry physical web application type: ADMIN_SERVICES_WEB_APP
    weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for EAS#11.1.2.0
    EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
    <Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
    java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    >
    <Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
    <Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Fri Mar 22 05:12:27 JST 2002,
                   To: Wed Mar 23 05:12:27 JST 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
    HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
    Kindly help me out in solving this issue.
    Thanks in advance.
    Regards,
    Balaji P

    Hi John,
    Sorry for replying late.
    I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
    But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
    When i looked in to the Config tool.log,I got the following messages.
    [2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
    [2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
    java.lang.NullPointerException
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
    at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
    at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
    at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
    at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
    at java.lang.Thread.run(Thread.java:619)
    Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
    Appreciates your help.
    Thanks & Regards,
    Balaji P

  • How can java programs execute automatically when it connects to network

    Good Day dears...
    How can java programs execute automatically when it connects to network.
    Thanks in Advance friends Shackir

    884924 wrote:
    Good Day dears...
    How can java programs execute automatically when it connects to network.What is "it"? That is, execute when what connects to the network?
    Your computer? If that's what you mean, this is not a Java question. It's an OS operational/administrative question. Executing any program, whether written in Java or not, based on some system event has to do with that system, not with the program. If it's possible to do this, you'd do it exactly the same way for a Java program as you would for any other program.
    Or is "it" the program itself? If this is what you mean, then it's a nonsensical question. For the program to connect to the network and detect that it has connected to the network, it must already be executing, so asking how to execute it at that point is meaningless.
    Finally, I'll point out that "connecting to the network" is a pretty meaningless phrase. Or rather, it has so many potentially valid meanings that it's impossible to know which one you're referring to when you use that phrase. And I'd be willing to bet you don't have a clear picture of that yourself.

  • Web server error: Could not register a HeartbeatMonitor

              Hi:
              When I use weblogic thin client (wljmsclient) and createTopicConnection()
              causes weblogic server exception below.
              Seems it depends on where my client runs. Not sure if it is related to
              network configuration for different subnet.
              Thanks in advance for your help. (weblogic server 8.1.1 or 8.1.2, IIOP protocol
              for client connection)
              Here is the exception:
              weblogic.jms.dispatcher.DispatcherException: Could not register a HeartbeatMonit
              orListener for [weblogic.iiop.IIOPRemoteRef@8b4c94fa] for weblogic.jms.C:HP01:4t
              :-38
              at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(Di
              spatcherWrapperState.java:569)
              at weblogic.jms.dispatcher.DispatcherManager.dispatcherAdd(DispatcherMan
              ager.java:106)
              at weblogic.jms.dispatcher.DispatcherManager.addDispatcherReference(Disp
              atcherManager.java:196)
              at weblogic.jms.frontend.FEConnectionFactory.connectionCreateInternal(FE
              ConnectionFactory.java:413)
              at weblogic.jms.frontend.FEConnectionFactory.connectionCreateRequest(FEC
              onnectionFactory.java:385)
              at weblogic.jms.frontend.FEConnectionFactory_WLSkel.invoke(Unknown Sourc
              e)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
              at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
              ef.java:108)
              at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
              at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
              dSubject.java:353)
              at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
              144)
              Tony
              

    Hi Tony,
              I wonder if there was a regression between 8.1.1 and 8.1.2? Anyhow,
              since the weblogic.jar works on the client, and since you verified
              your classpaths, it seems quite likely the problem is in WebLogic.
              I recommend two things:
              (1) ensure that you are using a supported version of the JVM
              (2) filing a support case and using weblogic.jar
              as a temporary work-around while the problem gets fixed
              Sorry I couldn't help you more.
              Tom
              tony wrote:
              > Tom:
              >
              > Thanks.
              > See my answer below:
              >
              >
              > Tom Barnes <[email protected].bea.com>
              > wrote:
              >
              >>Hi Tony,
              >>
              >>Some questions/thoughts:
              >>
              >>Is that the full stack trace?
              >
              >
              > There are few more lines: (paste from weblogic server log)
              >
              > at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
              > 144)
              > at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
              > :404)
              > at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
              > java:30)
              > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
              > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
              > aused by: weblogic.rmi.extensions.server.HeartbeatMonitorUnavailableException:
              > ould not register a HeartbeatMonitorListener for [weblogic.iiop.IIOPRemoteRef@a8
              > 2e47e4]
              > at weblogic.rmi.extensions.server.HeartbeatMonitor.addHeartbeatMonitorLi
              > tener(HeartbeatMonitor.java:86)
              > at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(Di
              > patcherWrapperState.java:559)
              > ... 14 more
              >
              >
              >
              >
              >>Did you use 8.1.2 jars for BOTH the client and the server?
              >
              >
              > yes
              >
              >
              >>Check that the server has no thin client jar in
              >>its classpath and that the client has no weblogic.jar in
              >>its classpath?
              >
              > Double checked.
              > Actually if client uses weblogic.jar, instead of wljmsclient and wlclient (thin
              > client), it works, and no this exception.
              >
              > Tony
              >
              >>Tom
              >>
              >>Tony wrote:
              >>
              >>>Hi:
              >>>
              >>> When I use weblogic thin client (wljmsclient) and createTopicConnection()
              >>>causes weblogic server exception below.
              >>> Seems it depends on where my client runs. Not sure if it is
              >>
              >>related to
              >>
              >>>network configuration for different subnet.
              >>> Thanks in advance for your help. (weblogic server 8.1.1 or 8.1.2,
              >>
              >>IIOP protocol
              >>
              >>>for client connection)
              >>>
              >>> Here is the exception:
              >>>
              >>>weblogic.jms.dispatcher.DispatcherException: Could not register a HeartbeatMonit
              >>>
              >>>orListener for [weblogic.iiop.IIOPRemoteRef@8b4c94fa] for weblogic.jms.C:HP01:4t
              >>>
              >>>:-38
              >>>
              >>> at weblogic.jms.dispatcher.DispatcherWrapperState.addPeerGoneListener(Di
              >>>
              >>>spatcherWrapperState.java:569)
              >>>
              >>> at weblogic.jms.dispatcher.DispatcherManager.dispatcherAdd(DispatcherMan
              >>>
              >>>ager.java:106)
              >>>
              >>> at weblogic.jms.dispatcher.DispatcherManager.addDispatcherReference(Disp
              >>>
              >>>atcherManager.java:196)
              >>>
              >>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateInternal(FE
              >>>
              >>>ConnectionFactory.java:413)
              >>>
              >>> at weblogic.jms.frontend.FEConnectionFactory.connectionCreateRequest(FEC
              >>>
              >>>onnectionFactory.java:385)
              >>>
              >>> at weblogic.jms.frontend.FEConnectionFactory_WLSkel.invoke(Unknown
              >>
              >>Sourc
              >>
              >>>e)
              >>>
              >>> at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
              >>>
              >>> at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerR
              >>>
              >>>ef.java:108)
              >>>
              >>> at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
              >>>
              >>> at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
              >>>
              >>>dSubject.java:353)
              >>>
              >>> at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
              >>>
              >>>144)
              >>>
              >>>
              >>>
              >>>Tony
              >>>
              >>>
              >>
              >
              

  • Administration server error: could not connect to server

    I was just viewing some outlines and calc scripts. I got un error trying to close a clac script. It said unable to unlock and then closes EAS. I tried to log back in and I am getting a could not connect error. How do I fix this or do I just recycle the server

    A little less drastic is to restart the EAS service. I've had an occasion or two where the service just up and stopped for no apparent reason, leaving me hanging with several hours of work to be redone in an outline... <sigh>
    Anyway, restarting the EAS service may be all that you needed to do, it may have aborted or hung itself.
    Edit: clearer to say service here rather than server.

  • When Faxing 7510 getting Error Message: Not Connected to Network

    When I try to send a fax from my Photosmart 7510 I get a message that it’s not connected to a network. My wireless connection is working. What other network is the printer referring too?

    What printer?  What router?  What operating system?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Listener  fails when not connected with network .

    Hi ,
    this again same old problem of listener.
    I have installed oracle 8 on my home pc RUNNING WIN2000 SP 4.
    The listenet runs fine when I am connected to the internet through dialup CONNECTION but fails when I am not connected .
    I donnt have a network adapter with my pc.
    How caN i run listener on a stand alone system ?
    the computer name is kabilpc
    Following error is spitted when I give start command from LSNRCTL80
    System parameter file is d:\orant\NET80\admin\listener.or
    Log messages written to d:\orant\NET80\log\listener.log
    Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\O
    Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\E
    Listening on: (ADDRESS=(PROTOCOL=nmp)(PIPENAME=\\KABILPC\
    Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=392)(HOST=127.0
    Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=404)(HOST=127.0
    Attempted to listen on: (DESCRIPTION=(CONNECT_TIMEOUT=10)
    (HOST=127.0.0.1)(PORT=1520)))
    TNS-12542: TNS:address already in use
    TNS-12560: TNS:protocol adapter error
    TNS-00512: Address already in use
    32-bit Windows Error: 48: Unknown system error
    THE FOLLOWING IS THE CONTENT OF LISTENER.ORA
    # D:\ORANT\NET80\ADMIN\LISTENER.ORA Configuration File:d:\orant\net80\admin\listener.ora
    # Generated by Oracle Net8 Assistant
    PASSWORDS_LISTENER= (oracle)
    LISTENER =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = ORCL))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (ADDRESS = (PROTOCOL = NMP)(SERVER = KABILPC)(PIPE = ORAPIPE))
    (ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
    (ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 9999))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1520))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = kabilpc)
    (SID_NAME = ORCL)
    (SID_DESC =
    (SID_NAME = extproc)
    (PROGRAM = extproc)
    THANKS
    K.M.DHALI

    (ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT =1520))Are these two entries not one and the same? Could you get rid of one of the entries and try.

  • Can't fax using HP7510 due to error message "not connected to network".

    I am having trouble with efax.  It has worked in the past with no issues.  Now I get a message that the printer is not connected to the nework even though it is.  I can print wirelessly. The issue is with faxing.   I have tried all suggestions I have seen on this forum...turning eprint on-off-on, changing  DNS serverver addresses to 8.8.8.8 and 8.8.4.4 respectively,  Unplugging and plugging back in.  Uninstalling and reinstalling printer.  Nothing works.  Any more suggestions?  I am not tech savy, so simple answers are best.  The only thing that has changed, is I added a HP6520 printer on my network. 
    This question was solved.
    View Solution.

    I just want to say "thank you" for your response to my issue.  I have been trying to get my fax working since I realized there was an issue a few weeks ago.  I searched for resolutions and tried several which didn't work.  I did as you suggested and now have an upgraded E-Fax account in order to send faxes.  I have not had the opportunity to send a fax yet but feel there shouldn't be an issue using their website.  Again thank you for you help.

  • Brand New iPhone 4 Accessory Error when not connected to Anything at all!

    I got my phone out the box and immediately began experience this message. "This accessory is not optimized for this iPhone" - "You may experience noise caused by cellular interference and a decrease in cellular signal strength" - It was not, and had never being attached to anything. I have reset and restored it to IOS4 (not synced).
    The message persists about once a minute, even if the phone is sleeping. It's too new to have lint trapped in it, even though I have checked the dock area for obstructions.

    Deodato wrote:
    Here what I actually figured out last night. If you have a faulty data cable it will interfere with the data flow causing this error to occur. Try swapping out your data cable for a new one. It worked for me, works like a charm.
    Harder to explain is why this also happens to me, with the iPhone 4 in a JBL speaker/dock. There is a next-to-zero chance that the dock connector in the JBL has somehow been damaged during the few days I've had the new iPhone as compared to the many days I used the 3GS. It is also hard for me to understand why this message just popped up today while the iPhone 4 was in the JBL dock, but did not pop up over the past several days while the iPhone 4 was in the same JBL dock.

  • AD mobile users have no permisssions when not connected to network

    I am the IT Manager in a Windows Server 2003 shop using Active Directory. I am trying to integrate a MacBook just purchased with Leopard 10.5.2. The computer is sucessfully bound to the AD domain. I created a local user account on the machine, and while connected to the company network, an active directory user. When the AD user logs in and the machine is connected to the company network, all is fine: the user's home directory is automatically connected and all application prefs and local folders are available.
    However, when away from the company network, loging in with the mobile user's credentials gets a desktop, but no permissions to that user's own local folders:no Dock prefs, no documents folder, no downloads folder, no nothing. Only internet access if a connection is available. Suppossedly credentials are cached on the MacBook, as that option was selected when I created the account. Is this behavior correct?
    Thanks in advance.

    tmoore41 wrote:
    Ok, I'll give it a try just to see what happens. I am not sure that this is such a good solution however:
    1) I am not sure that I have permission to redistribute deployJava.js with my project. What is the license for it? When I download the script it has been stripped of all comments.Good question. I had to chase up the webmaster of mindprod.com to alter his pages to reflect that the preferred method was to hot-link to Sun's own script. It never occured to me to question that Sun might not allow not hot-linking to the script. Now I go looking over their documentation on the script, it is not really clear.
    The documentation I was looking through, can be found at the [Java™ Rich Internet Applications Deployment Advice|http://java.sun.com/javase/6/docs/technotes/guides/jweb/deployment_advice.html] page.
    2) How can I ensure that the installation methods will be kept up to date If I 'hard code' the deployment methods by distributing them myself? You can't. That is one downside of using a copy of the script.
    .. Are there specific version dependencies within the deployJava.js script that need to be updated once in a while? Not that I know of. Though Sun might upload changes to correct bugs in various browsers.
    I am guessing that one of the design elements of the 'deployJava.js' script is that since it is on a sun server it can be kept up to date over time. This cannot happen once it is frozen in to my distribution.Well summed up.
    It would be nice if deployJava.js checked if the java install was adequate, and if not then went out to the network to get instructions on what to do next. It is too hard for me to tell what is going on in the whitespaced-stripped file however. Any internal documentation on what deployJava.js does?See what you can figure from the link above, and related documentation.

  • MBP increasingly slower when not connected to network

    When connected to the network at work (either through WiFi or ethernet cable) my macbook pro works OK. However, when I am travelling or take my MBP home performance starts degrading to a point where launching something like Dictionary can take 15-20 seconds.
    I get a spinning beach ball when launching or closing applications, as well as when saving files. Typically when disk operations are involved.
    Originally, after reading some posts in this forum, I thought that it was a hard drive problem. However, I have used the tools that come with the installation disk and disk warrior showing no problems. In addition, the problem always sort out itself after rebooting while connected to the network at work.
    Trying to find the missing network could be a problem, but going through the logs in console I can not find anything like that. The other issue is that performance degradation compounds with time since being connected to work. I can' figure out a reason for this.
    Any suggestions pointing to a solution are most welcome.
    Macbook Pro   Mac OS X (10.4.9)   2GHz, 1.5GB RAM

    After playing for a while with the computer I think that I have at least found where the computer is wasting all this time.
    Using Console and checking system.log, I found several instances of "DirectoryService[46]: Active Directory: Could not determine closest Domain Controller from Site information in directory". I did use "sudo killall -USR1 DirectoryService" in Terminal to send debugging information to /Library/Logs/DirectoryService/DirectoryService.debug.log.
    Here I can see that every time I have a delay, the computer spends 25 seconds trying to reach a LDAPv3 server at work. So, it seems to be a misconfigured network problem, which I hope to sort out tomorrow.
    Macbook Pro Mac OS X (10.4.9) 2GHz, 1.5GB RAM

  • Imported Photos when NOT connected to network drive is missing

    I connect to external disk drive for my photos.
    But when I wasn't connected to the drive, I imported photos just fine - was able to see them all (the just imported one). I could see "blank" thumbnails for the network photos (because I wasn't connected).
    Next time I connected to the external drive, the photos i just imported, when I wasn't connected was missing?
    ANY HELP? PLEASE? THANKS.

    daveyd_00
    Welcome to the Apple Discussions.
    My guess is you have two libraries. One is on the external, has all the older pics, the other has the new additions.
    To find the other, go to the Finder Go Menu -> Go to Folder and type in /Volumes/The Name of Your External HD...
    Can you see the opther library there? If so, drag it to the desktop, and then use iPhoto Library Manager to merge the libraries.
    Regards
    TD

  • Slow Finder startup when not connected to network

    I use a Linksys BEFW11S4 router/WAP for my home network. The Linksys connects my iMac (ethernet), iBook (wireless) and an Airport Express. I decided I would control my son's access to the internet by using the Linksys router software, which is password-protected, to enable or disable the network connection.
    However, I'm finding that when the network connection is disabled, the Finder loads very slowly upon startup. The dock appears fairly quickly, but a color pinwheel spins for a couple of minutes before the Finder menu bar, desktop file and volume icons and any windows I've left opened appear on the desktop. When the network connection is enabled, startup occurs normally . This situation occurs whether I'm on the iMac or the iBook.
    Does anyone know a reason for this behavior?
    iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB   Mac OS X (10.3.9)  

    I talked to Linksys technical support, and they told me this behavior was normal. As long as my computers are connected to the router, they will hunt for an Internet connection on startup. (I found this was true even when I physically disconnected my DSL modem from the outer.) It seems that the lengthy delay in getting the Finder loaded is unavoidable in that case. Good work, Jase!
    iMac G4 17; iBook G4 1.33 Mhz 14; iPod 3G 20GB   Mac OS X (10.3.9)  

  • I keep getting an error message not connected to network

    error message is network connection failed

    What printer?  What router?  What operating system?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

    Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

    Hi,
    You didnt mention which version of IWS. follow these steps.
    (1)Goto Web Server Administration Server, select the server you want to manage.
    (2)Select Preference >> Perfomance Tuning.
    (3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
    (4) Apply changes and restart the server.
    *Setting the timeout to a lower value, however, may    prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before   the connection is closed is 432000 bits (2400 multiplied by 180)
    Regards
    T.Raghulan
    [email protected]

Maybe you are looking for