Listener on ESB file adapter does not appear to listen

I am new to the world of SOA, ESB, and BPEL and am starting with something simple such as reading a file from one directory performing a data transformation and writing the file to a different directory. I understand that Oracle's ESB and BPEL are very similar in functionality. I have successfully been able to read files in using a file adapter and listener in BPEL. When I try to set up a new ESB application with a file adapter and listener in ESB, I register the project with the Integration Server without any problems, and am able to see all components in the ESB Control. When I drop a new file into the directory that the adapter is attached and listening to, nothing happens. The file is not picked up and there are no new instances of any ESB services. Am I missing something? Is there a log that could be checked to see if the service is even checking the directory?
Along the same lines, I am wondering if there is an easy way to update the directory that is being listened to once the service has been registered/deployed (with either ESB or BPEL). Is there a config file that someone other than a developer could update without having to redeploy the service again.
Any help would be greatly appreciated. Thanks.

What platform are you running and what install option did you use, basic or advanced?
There are known issues with adapters enabling automatically on Linux that require you to restart the container. See Re: Changing File Adapter target directory - container bounce required?
You can change the polling directory by following the instructions in this thread.
Changing File Adapter target directory - container bounce required?

Similar Messages

  • HT1526 When I delete a file it does not appear in my trash folder 10.6.8, please help.

    Please help as when I delete a file it does not appear in my trash can, however it deletes.

    You might have to rebuild your hiden trash file...
    Solving Trash Problems...
    http://thexlab.com/faqs/trash.html
    Empty and recreate an account's Trash
    The following procedure will "kill two birds with one stone." It will both:
    Empty the Trash of an affected account.
    Create a new ~/.Trash directory, with correct ownership and permissions, for that account....
    More at that link.

  • HT203176 When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17'

    When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17''

    http://www.thexlab.com/faqs/trash.html for starters.

  • Cannot open file it does not appear to be a valid archive

    While trying to download Oracle 8i/9i i keep getting the message
    'Cannot open file it does not appear to be a valid archive'
    Can someone please help me with this
    i have tried to download this 10 times already but of no use
    Thanks
    Rimpy

    I was getting a similar, if not the same, problem when I used IE 5.5 to download the file. It used to start extracting then stop about 75% of the way through and dump some error about the archive being corrupt and not being able to open it. After installing Netscape and disabling the download manager application, I was able to download and extrac the zip files with winzip 8 and also winrar without any problems.

  • File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

    In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all.  I have reset the preferences numerous times and am good to go until I shut down my computer.  When I reboot they are gone again.  I have a Mac with OS 10.10.2 (Yosemite) and CC. 

    Mardi Carter wrote:
    I shut down using "Shut Down" under the Apple menu.....always…
    Well, that's fine for the OS, but sometimes not so great for Photoshop.  Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
    Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
    You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
    Forget about "it had never happened before", Yosemite is a work in progress.  Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5.  That has proven to be the nature of the beast.

  • Why local file destype does not appear in the parameter form ?

    Hi,
    There is a Destype option Local File but it does not appear in the list for Destype in the Parameter form.Why?
    Even file is not working & the reports server is getting hanged if i specify the destype as file & a valid file name & format is given.
    Print option from the app server is also not working, i mean remote printing.
    My App server machine can see my local printer, but when i give the print share name or literally five\\machine name..printername then too print option is not working.
    Thanks
    Mahesh

    Hi Shaun,
    I'am using 9iDS & the reports documentation says that Local File DesType Option is valid for rwclient & rwservlet.
    When your specify in the command line option it works, no issues but in web reports where i get the parameter form Destype list does not contain Local File Option.
    For web reports i use rwservlet.
    i mean to say my url is something like this
    http://oracle.guru:8888/reports/rwservlet?report=abc.rdf&userid=a/b@c&destype=cache&paramform=yes&server=myserver
    one more peculiar thing, i have reported it on Metalink.
    As you can see in the above URL i have given an argument of destype=cache, if i do not give this then my parameter for will not come up!!!, why should i give a destype for the parameter form to be displayed?
    Ok coming to my current problem..
    in 9iDS Reports is Local File supported? i.e. when i give a URL like above(My parameter form has system & user parameters including DesType,DesName & DesFormat).
    coming to the file option in DesType.
    In my parameter form if i select Destype as File & give a valid file name & a valid Desformat the report server hangs i mean there is no activity on the client & after this any report requests from any other clients is not responded by the Reports Server.
    When i check in the performance monitor of my Reports Server the CPU Utilization will be constant at 100%
    Thanks
    Mahesh

  • Sender File Adapter does not get files when there is a large number ( 300)

    We are on XI 7.0 (SAPKB70015)
    We have an issue picking up a large number of files from a particular server. We are trying to pickup the files based on a wildcard e.g. test
    - we can retreive up to 200 files from the same server (using the same config) no problem
    - we can pull lots of files (>3000) files from other servers (using the same config) no problem
    - we can write an mget command (mget test) to reteive the files no problem
    So the only issue is retrieving a large number of files from a parfticular server. We see no errors in the RWB.
    To get this sorted out we need to find the exact commmands that XI executes to attempt to retrieve the files. Can anyone point me in the right direction on how to find this.
    Thanks
    Richard

    It turned out that this was caused by a limitation on the ftp server.
    The file adapter uses the dir command to get a listing of the files matching a specific mask. The dir command does not return any files if there are a large number (the ls command works fine but the file adapter uses dir instead of ls).
    sap told me that 'According to this FTP server is no compliant with RFC 959 and that is
    why DIR command returns an error.'
    We were able to get this resolved by applying a patch on the ftp server.
    Thanks
    Richard

  • File Adapter does not process the same file twice

    SOA: 11.1.1.4 (non-HA).
    I have a file adapter that triggers when a new file gets to a directory; the file is not deleted after the process triggers.
    The process is supposed to call other services via a mediator and if any remote fault happens it should rollback automatically and re-trigger with the same file at the next polling interval.
    I have literally 3 scenarios:
    1). The file gets picked up once, the process fails and the file is never picked up again.
    Msg in log: The file : /xx/xx/xx/abc.xml is being ignored as it has already been processed
    2). If the mediator only routes to one service after the file gets picked up, it works as expect (that is rollback and restart at the next polling interval). If it has more than one sequential routing rule, I see the same error as above.
    3). File does not get picked up EVEN if I "touch" or rename the file.
    Msg in Log:
    File Adapter ProcessName Poller enqueuing file for processing :/xx/xx/xx/abc.xml
    File Adapter ProcessName Ignoring File : abc.xml as it is already enqued for processing.
    I have already checked, there is no permission issue.
    This is what my .jca file looks like:
    <adapter-config name="getFile" adapter="File Adapter" wsdlLocation="getFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/FileAdapter" UIincludeWildcard="*"/>
    <endpoint-activation portType="Read_ptt" operation="Read">
    <activation-spec className="oracle.tip.adapter.file.inbound.ScalableFileActivationSpec">
    <property name="DeleteFile" value="false"/>
    <property name="MinimumAge" value="5"/>
    <property name="SingleThreadModel" value="true"/>
    <property name="PhysicalDirectory" value="/xx/xx"/>
    <property name="Recursive" value="false"/>
    <property name="PollingFrequency" value="20"/>
    <property name="IncludeFiles" value=".*"/>
    <property name="UseHeaders" value="true"/>
    <property name="MaxRaiseSize" value="5"/>
    <property name="ListSorter" value="oracle.tip.adapter.file.inbound.listing.TimestampSorterAscending"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>
    Thanks for looking into it in advance.
    Any help with the error messages will be appreciated.

    You have to use MOVE operation, if there is any remote exception occured, then move the file to someother folder and again move back to the same folder where the file pickup will start.
    In that way you will be use the same file picked up next time when the polling happens.
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
    Thanks,
    Vijay

  • File Share does not appear as a Datasource!

    I have created a File System Repository and a Index - However when I try and select a data source on the Index I can't find the file share I created.
    I have set up the Folder as a Mounted Network folder!
    Hope someone can help!

    OK Phil,
    First, you have to solve this problem, and then create an index.
    In order to know which is the problem with this repository you can go:
    System Administrators\Monitoring\KM\Component Monitor\Repository Manager
    Patricio.

  • After I write an e-mail the file menu does not appear that allows me to send the message

    This menu has always been there and suddenly disappeared and I can't figure out how to retrieve it

    well perhaps you need to select menu bar as well as mail toolbar, and do it while in the compose window.

  • Image does not appear when publishing...does it matter where you import audio?

    I have an image on my slide and when I preview the slide it appears correctly, when I hit F10 to preview next 5 sldies or publish file it does not appear. I have imported audio to the slide not to an object. I am wondering if this matters? Any help on this would be greatly appreciated.
    Thank you...

    Rod -
    Cant really explain this one, but the visible check box was checked... I then unchecked it and checked it again, now it seems to be working.....
    Weird, but at least it is working.

  • CD does not appear in Source list

    Hi
    when trying to import from CD, the first CD appears in the source list but subsequent CDs don't. I've looked at the iTunes support page and seen the post about running msconfig but the file mentioned does not appear startup item list (so I cant disable it ).
    I have the latest patches for XP and the CD drive.
    Any further thoughts ?
    Thanks

    That did not work either. I get another message that says the disk image failed to mount.
    I did finally get the updates for Panther last night via software update, but it has not solved anything. Also had someone come over and see what they could figure out -- to no avail.
    Digital data CD's appear on desktop just fine. CDr's load. Just not music cd's. It's driving me crazy!

  • Error The file just loaded does not appear to be executable.

    Hi there,
    I have some problems with a Sun Fire T2000. Solaris 10 was installed one year ago. The server went down and now I am trying to connect to recover the dates and make a new installation.
    Booting the server, I don't get any message. If I type #. I reach to sc> mode and from there I can get to ok prompt. From either mode, I can't get in the operating system.
    From the ok prompt I issued "show-disks" and I booted with the cdrom choosing the option from the output of "show-disks". I got the "The file just loaded does not appear to be executable."
    I searched the error and then I booted with "boot cdrom -s" and I got the "ERROR: /virtual-devices@100/console@1: Last Trap: Division by Zero".
    Please advice for a new installation.
    Thank you.

    Hi, and again thanks.
    I understood that this server runs on different levels, like with firmware OpenBoot (ok prompt) or System Controll (sc>).
    I understood the different setups can be made from ok prompt, like the problem I have now.
    I am at the ok prompt. The "printenv" showed me that I was booting from net1, which is wrong because the installation just ended. So I changed to "disk" following your indications. I checked with printenv and indeed the boot sequence was changed to boot disk.
    I issued the boot command I after the message "Boot device: disk File and args:" it looks like hanging. I am sure I can get back to sc> prompt but it looks like a loop to me: how do I get into the operating system? I looks I can switch only from ok to sc and backwards. But, after booting I'd like to enter in Solaris OS, not OpenBoot firmware or System Control...
    Thank u for the time and listening.

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

  • This file does not appear to be a photoshop file error.

    Hello,
    I know this has been covered a few times already, but none of the previous threads about it were able to help my situation.
    Ok so here is what i did:
    Exported a JPEG from a timeline in FCP. Brought that JPEG into PS (i am using CS3), and changed the image size from 1920x1080 to 720x480. Then saved as a JPEG, didn't tick any boxes, just used default save as settings.
    I then brought those images into my Encore DVD Project, added them to the library, then placed one into a already made menu, and "sent to back".. so it became the new background. I did this with two menu's today. Note i have actually done this same exact process many times without problem. I then tried to build a dvd image of the project, and i got the "this file does not appear to be a photoshop file". Now it won't even let me open those menu's (plus another one, which i made a long time ago, and have even successfully built DVD's with), to edit them. I tried removing all the new JPEGS i added today, from the library, but still i get the same message.
    The menu's that i now can't open, took a very long time to make, and i need to have this DVD completed ASAP.. as it is being released world wide in a couple of weeks and i need to get it replicated. So i don't actually have time to remake these menu's. So if anyone can help me, that would be much appreciated, as i have studio exec's cracking down on me.
    Thanks in advance :-)

    Now, if one Imports the JPEG with its extension changed to PSD as a Menu, then the Menu is created, including the necessary Layers. The Menu is NOW a PSD, and when Opened in PS will reflect the Layer structure (try this at home). If one had constructed Buttons in the JPEG, they would now only be graphics on that one single Background Layer in the JPEG. They would not function as Buttons, but could be useful graphics for other things. One would then need to add real Button Layer Sets to the PSD to be able to add any navigation.
    Back in the post above, I suggested doing the Save_As to JPEG to see how things get changed. Use that in another test - Import that JPEG as a Menu. In Encore, try to Link to what had originally been Buttons in that Imported JPEG. What happens? Can you Link to them, even though you are now working with the created PSD?
    Now, add a Button, or two, from the Library. Choose Edit in Photoshop, and look at the Layer and Layer Set structure. Things have changed from the original JPEG, with only the Background Layer. You now have that Library Button's Layer Set structure.
    Good luck, and hope that this helps,
    Hunt
    Here are looks at the structure, using the Library Menu Business>Clock:
    The Menu in PSD with the Layers Palette Open
    Same Image With Layers Flattened to Save As a JPEG
    What the JPEG Looks Like As a Flattened JPEG
    The only way to Import that JPEG into Encore as a Menu would be to change the file extension to PSD, but what appear to be Buttons would NOT be Buttons, but just static pixels in the Background.
    Message was edited by: Bill Hunt - Added graphics

Maybe you are looking for