Sender File Adapter does not get files when there is a large number ( 300)

We are on XI 7.0 (SAPKB70015)
We have an issue picking up a large number of files from a particular server. We are trying to pickup the files based on a wildcard e.g. test
- we can retreive up to 200 files from the same server (using the same config) no problem
- we can pull lots of files (>3000) files from other servers (using the same config) no problem
- we can write an mget command (mget test) to reteive the files no problem
So the only issue is retrieving a large number of files from a parfticular server. We see no errors in the RWB.
To get this sorted out we need to find the exact commmands that XI executes to attempt to retrieve the files. Can anyone point me in the right direction on how to find this.
Thanks
Richard

It turned out that this was caused by a limitation on the ftp server.
The file adapter uses the dir command to get a listing of the files matching a specific mask. The dir command does not return any files if there are a large number (the ls command works fine but the file adapter uses dir instead of ls).
sap told me that 'According to this FTP server is no compliant with RFC 959 and that is
why DIR command returns an error.'
We were able to get this resolved by applying a patch on the ftp server.
Thanks
Richard

Similar Messages

Java does not get file list from shared folder in another server.

Hi,
I'm using java 1.4.2.16,
Command below does not get file list.
import java.io.;*..
File file = new File("\\\\10.242.22.28\\SapMII");
File[] files = file.listFiles();
SapMII folder is Everyone full Control permission.
How can i solve this problem?
Thanks.

Could you please post replies in a more helpful way? Just informing me that it was an NPE doesn't really tell me anything. Post the stacktrace (Exception#printStackTrace()). And the listFile() methods API has this to say:
Returns null if this abstract pathname does not denote a directory, or if an I/O error occurs.I'm able to run this sample code easily:
import java.io.File;
public class TestFileList {
     public static void main(String[] args) {
          File file = new File("\\\\10.40.55.33\\shared");
          File [] files = file.listFiles();
          for(File currentFile: files )
               System.out.println(currentFile.getName());
}

Tried syncing entire music library to ipod but some albums were skipped. tried click and drag album but device does not get highlighted when i drag album there. any suggestions?

I tried syncing entire music library to ipod. some albums were skipped. tried clicking and dragging but device does not get highlighted when i drag the album to the device. How can I sync album to ipod? the album is imported and not purchased thru itunes store.

Does it play in iTunes on the computer? What is the format of the album?
Right click and select Get Info. Look under File in iTunes 12

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

File Adapter is not polling File.

Hi All,
I am using file adapter to poll a file. When I am restarting server then it is picking file. After then when I am dropping a file then File Adapter is not picking File.
Can any one guide me what si problem?
I am using SOA SUITE 10.1.3.4
Thanks in Advance.

First clusterGroupId is a unique value. Do not use the same clusterGroupId across different adapters even in different process.
Once clusterGroupId is defined, the multiple activations of the same adapter Activation Agent is to be detected implicitly and automatically by all the instances of the adapter framework active in that cluster. The cluster will allow onlye one node activation to start the reading the files/messages. The adapter framework instances chooses one among multiple nodes, randomly to assume the Primary Activation responsibility. The other activations (instances) in the cluster will initiate to a hot stand-by state, without actually invoking EndpointActivation on the JCA resource adapter.
If a primary activation at some point becomes unresponsive, is deactivated manually or if it crashes/exits, then any one of the remaining adapter framework members of the cluster group will immediately detect this, and reassign the primary activation responsibility to one of activation agents standing by.
This feature uses JGroups underneath for the implementation, hence the clusterGroupId property. These features require cluster and JGroups configuration in collaxa-config.xml and jgroups-protocol.xml. All BPEL instances participating in the cluster must share the same cluster name in collaxa-config.xml,and the same multicast address and port in jgroups-protocol.xml.
As far as for this issue, I too face the same across diff environments and searching for the exact reason. I believe this happens when primary activation agent crashes, the hand-over to the other node is not happening properly through jgroups.
Nirav

Workflow initiator does not get workitems when PR Approve rejects.

Hi,
Workflow initiators does not get workitems when PR Approve rejects.Is there any thing missing in that .
Please let me know .
Regards,
Gurprit Bhatia
Edited by: GURPRIT BHATIA on Jan 28, 2009 8:38 AM

Hi GB,
In order that the WF initiator gets workitems on PR rejection, you need to assign method 'InfoReleaseRejected' (BO BUS2009) to a task in the PR rejection flow of your WF. If this is done, then check if you have assigned WF Initiator as the Agent in that task.
Hope this helps.
Thanks,
Ajay

My iphone 5 does not show callid when there is a call, i used to get it but after my trip to China, the cller id is always unknown, how can I get it back? thanks

Hi
My iphone 5 does not show callid when there is a call, i used to get it earlier but after my recent trip to China, the cller id is always shows unknown, how can I get it back? thanks

Thanks Malcom, I was able to restablish the caller id feature through the carrier as you suggested

File Adapter does not process the same file twice

SOA: 11.1.1.4 (non-HA).
I have a file adapter that triggers when a new file gets to a directory; the file is not deleted after the process triggers.
The process is supposed to call other services via a mediator and if any remote fault happens it should rollback automatically and re-trigger with the same file at the next polling interval.
I have literally 3 scenarios:
1). The file gets picked up once, the process fails and the file is never picked up again.
Msg in log: The file : /xx/xx/xx/abc.xml is being ignored as it has already been processed
2). If the mediator only routes to one service after the file gets picked up, it works as expect (that is rollback and restart at the next polling interval). If it has more than one sequential routing rule, I see the same error as above.
3). File does not get picked up EVEN if I "touch" or rename the file.
Msg in Log:
File Adapter ProcessName Poller enqueuing file for processing :/xx/xx/xx/abc.xml
File Adapter ProcessName Ignoring File : abc.xml as it is already enqued for processing.
I have already checked, there is no permission issue.
This is what my .jca file looks like:
<adapter-config name="getFile" adapter="File Adapter" wsdlLocation="getFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="*"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.ScalableFileActivationSpec">
<property name="DeleteFile" value="false"/>
<property name="MinimumAge" value="5"/>
<property name="SingleThreadModel" value="true"/>
<property name="PhysicalDirectory" value="/xx/xx"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="20"/>
<property name="IncludeFiles" value=".*"/>
<property name="UseHeaders" value="true"/>
<property name="MaxRaiseSize" value="5"/>
<property name="ListSorter" value="oracle.tip.adapter.file.inbound.listing.TimestampSorterAscending"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
Thanks for looking into it in advance.
Any help with the error messages will be appreciated.

You have to use MOVE operation, if there is any remote exception occured, then move the file to someother folder and again move back to the same folder where the file pickup will start.
In that way you will be use the same file picked up next time when the polling happens.
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts).
Thanks,
Vijay

Applet does not get loaded when viewed in a browser

Hi,
I have an applet,which works fine when I use appletviewer to see it. But from the browser, the applet does not get loaded.
An error appears at the bottom of the browser that load: class not found.
Any suggestions...please..
Thank you....
Pooja

If you are using Internet Explorer, you should check to see if your browser is set to use Sun's JRE that came with your download of the SDK. (If you didn't install the JRE, you need to go back and run that on your machine. You can check to see if you are using Java's runtime enviornment (JRE) in Internet Explorer by opening IE and going to Tools --> Internet Options... --> and then going to the Advanced tab. Scroll down and make sure the box next to Java Sun "use Java 2 for <applet>" is checked. If that option is not available, you need to install the JRE.
If that doesn't help, try using the HTML converter that comes with the SDK. It'll take your current HTML page, and you can customize it to force a download and/or usage of the JRE for applet viewing if for your particular browser.
Hope one of these helps!

FTP Adapter File Polling does not raise error when FTP server is down

Hi All,
Thanks in advance.
I am polling for new files in a FTP Server. However, if the server is down there is no way for me to catch the fault to notify someone. I am using fault-policies but that never gets triggered when polling an unavailable FTP Server.
One option is to have a completely separate scheduled process (SOA or not) that tries to connect to the servers but I am trying not to go that route just to keep things manageable and within the realm of the process.
I am sure that I am not the only one polling for new files in a FTP Server, so I thought to pick your brain to tackle this scenario.
Thanks for taking the time to read this.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

Listener on ESB file adapter does not appear to listen

I am new to the world of SOA, ESB, and BPEL and am starting with something simple such as reading a file from one directory performing a data transformation and writing the file to a different directory. I understand that Oracle's ESB and BPEL are very similar in functionality. I have successfully been able to read files in using a file adapter and listener in BPEL. When I try to set up a new ESB application with a file adapter and listener in ESB, I register the project with the Integration Server without any problems, and am able to see all components in the ESB Control. When I drop a new file into the directory that the adapter is attached and listening to, nothing happens. The file is not picked up and there are no new instances of any ESB services. Am I missing something? Is there a log that could be checked to see if the service is even checking the directory?
Along the same lines, I am wondering if there is an easy way to update the directory that is being listened to once the service has been registered/deployed (with either ESB or BPEL). Is there a config file that someone other than a developer could update without having to redeploy the service again.
Any help would be greatly appreciated. Thanks.

What platform are you running and what install option did you use, basic or advanced?
There are known issues with adapters enabling automatically on Linux that require you to restart the container. See Re: Changing File Adapter target directory - container bounce required?
You can change the polling directory by following the instructions in this thread.
Changing File Adapter target directory - container bounce required?

[File-Adapter] Reading not finished files

Hey,
my sender file adapter reading files which are not finished yet.
The files are created by an ABAP programm. The creation could
take some seconds. If the file adapter polls while creation is not
finished, we have a problem.
The flag "Process Read-Only Files" is not set, so the ABAP programm
doesn't seem to set the file to read only.
Is there a way to check (e.g. with an operating system command) if the
file is processed completly?
For example I could check if the date of creation is higher than 10 minutes
or something like this.
Any other ideas?
thanks
chris

What is the file adapter option you are using?
If NFS, you have the option "Milliseconds check before modification" that will prevent the file from being picked up till they are completly written.
If FTP, then when the file is being written to the ftp folder you should have the option to use temporary files option
Regards,
Bhavesh

Sender JMS Adapter does not work

Hi all,
We have created a sender JMS adapter with transport protocol "Access JMS Provider with JNDI". The adapter connects to destination successfully, so the connection parameters are right. However, we do not receive any message when the sender sends them.
What parameters should we set to be able to retrieve messages from the queue?
Thanks in advance,
Samantha.

Hi,
Into Communication Channel Monitoring, we get the following errors:
1. Error occurred while processing message: null. Detailed error (if any): java.lang.NullPointerException: at java.text.MessageFormat.applyPattern(MessageFormat.java:414) ...
2. Added dynamic header: DCJMSMessageSelector to XI message null which corresponds to JMS message selector: mentioned in the channel configuration
3. XI message ID corresponding to the JMS message with ID: ID:1109F6E3DF541328-00000000053E as stripped of the "ID:" marker and now has the value: null
4. XI message ID corresponding to JMS message with ID: ID:1109F6E3DF541328-00000000053E will be created with the value of JMSCorrelationID which has the value: null
Where is the problem?
Thanks again,
Samantha.

Names.exe does not get installed when installing oracle

Hello Group,
I have installe Oracle 9.2 server on a Windows 2000 SP 4 machine and am configuring this as an oracle names server. The configuration is succesfull, however the service cannot be started 'coz the service is configured to execute the files names.exe from the folder c:\oracle\ora92\bin\names.exe.
However, i have searched twice but this file does not exist on the server. I am not sure if i am missing something.
Any help would be appreciated.
Thanks and Regards,
Ashish

Hello Ashish,
I've got the same problem after installation Oracle 9.2.0.1 for Windows.The file names.exe was missed.
And what is more I installed twice this product and in both cases I could find names.exe in bin directory.
May be I have to set special option for Oracle Names before the installation.
Did you resolve this problem?
Thanks for help.
Andrey

"Message Processor" does not get assigned when saving the document.

Hi folks!
When creating a support message (SLFN) and saving the document usually the BP of the current user got assigned to the partner funtion "message processor".
This used to work but does not anymore. Now I cannot find the reason why.
I think I could achieve this via customizing "Make Settings for Change Transaction Types" and using "Specify Copy of Current User" but I am pretty sure this was not customized before.
I could use partner determination procedure, too. Access sequence "User" but still I am not sure this was customized before.
I am using SLFN transaction type service provider scenario (SLFC0001)
Anyone got an idea?
Thanks in advance.
Regards
Edited by: Christian Kaunzner on Mar 25, 2009 5:15 PM

Hi Christian,
did you solve this issue on your own? can you share your experience?
thanks
Pedro Rodrigues

Sender File Adapter does not get files when there is a large number ( 300)

Similar Messages

Maybe you are looking for