Listing material not in the inventory

Hi everyone.
I want to know if there is a transaction or a report that allows us to list all the material not in the inventory since a date that the user will input.
I'm a programmer but before starting developping a specific program for that i need to be sure that nothing like that already exists in the standard.
Thanks for your suggestions.

Hello,
MB51 will list all material movements that's why you may have several records for one materials (it depends how busy the WH staff was...:) )
You can create a report with uniq materialID through PIVOT table but of course it isn't the exact solution I think...
One more idea:
There's a report MB5B where it is possible to give both date and MVT as filter criteria and if you choose 'Ttls only' you will get one 'section' per material.
(Sorrowfully the format of the output of this report is very poor and I haven't succeded in running it with MVT)
BR
Csaba

Similar Messages

Error "Material not subject to inventory management in Plant " on the STO

I want to create a Stock tansport order ( plant to plant transfer) with stock & non-stock item and non stock item is giving an error "Material not subject to inventory management in Plant". Please tell me how to clear this error. Plant / SLOC view is already maintained and no qty/value update selected on the material type because of non stock item. Please tell me how to overcome this error on the STO

Hello,
As you said you want to move nonstock item through STO.
It seems that in your case say for example your plant 1000 has material ABC which is maintained as stock item.
Now you have another plant 2000, whaich has same material ABC which is maintained as non-stock item (generally used in third party sales or cross docking).
If your material ABC is nonstock in plant 2000 where no stocks are mainatined, then how can you move the stock to plant 1000 where it is stock item.
Could you please confirmthat can you see the stock in MMBE for plant where that material is maintained as non stock item.
If so, then you have chnage the plant specific material status for that plant from non stock item to stock item.
This is maintained in material master in purchasing view.
The other way out is you have to third party sales with ship to party as the plant where that item is maintained as stock item.
In this case flow is
Sales order>>Purchase requistion>>Purchase order>>(Vendor supplies material directly to customer (which is you plant where that item is stock item))
Br,
Tushar
Instead you can acheive

Material not subj. to inventory mgmt. in plant F315 (Pl. check your input)

Sir,
i am facing an issue while making sto's
the error is as follows "Material not subj. to inventory mgmt. in plant F315 (Pl. check your input)"
do i need to customise some settings
ply help
regards
amey

Hi
Go to OMS2 click material type for this material you have taken..
Then click quantity/value updating, then for your valuation area ( i.e plant), click the quantity updating and value updating indicator.
Regards,
Raman

Material not subj. to inventory mgmt. in plant

Dear All,
During stock transfer, while creating PO I am gettinh an error "Material not subj. to inventory mgmt. in plant " msg no.- ME124.
though i have maintained all parameters. Please help me to find where I am missin??
Regards-
Ram

Hi Ram,
Go into IMG > Logistics general > material master > Basic Settings > material type > Define Attributes of Material Types
Select your material type and click Quantity/Value update.
Please do the above necessary customization, Hope this helps.
Regards
MT

Material not subject to inventory management

Hi all,
While creating Stock transort order through SD route, it says material not maintained in inventory managemntment, though the material is very well maintained in the particular plant, and in the view Plant / Storage data as well. Also the plant parameters have been maintained.
Please advise.

hi
Please check the material type. is it is for value and quantity update is ticked.
Regards,
vijay

Error: material not subjected to inventory management in a plant

While creating a STO . I am getting the following error
Error: material not subjected to inventory management in a plant
What should be done??????????/

Dear anamicabhardwaj ,
You need to check transaction OMS2 for the material type you use for the material.
Basically for STO which need to inventorized, the quantity updating need to check
for the material type, then only it can be inventorized. There is no other option but check
the quantity update indicator.
Regards,
ian, Wong Loke Foong

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

2 Select lists do not change the value

Hi all,
I am having a situation. I have 2 select lists . The second one is dependent of the first one. Data are retrieved perfectly.
These select lists are done in page 0 and they are used in the referenced page. Apexlib is used in the page 0
When I change the item of the second list, the returned value used in a report, is ok. It takes the correct one.
If I change the item of the fist select list, the returned value of the second select list does not change(the displayed value are correct). the report is run (after changing the first select list) but the wrong returned value of the second list is taken.
The correct value of the second one is taken only if page is submited or we change the option.
it seems that it keeps the last value of the second list according to the previous selection.
Both select list is without submit.
How can I make a "refresh" of the returned values of the second select list (the records are ok) after changing the first one?
Thanks in advance
Raf

Hi Rafael,
is ApexLib integrated correct? Did you check against http://apexlib.oracleapex.info/howto_integrate_manual_steps.html ?
Or did you try and install the ApexLib Feature Demonstration Application and see if it works there?
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

HT204370 A movie shows in my purchased list but not in the Movies list...

A movie shows in my purchased list but not in the Movies list...

The purchase history on your iTunes account will only show purchases from the iTunes stores (iTunes, app store, ibookstore, Mac app store), not from Apple online or bricks-and-mortar stores.
Does anything show on your credit card ? If the email is genuine then it's possible that your and their email addresses are similar and that they gave the wrong id (or the store typed it incorrectly), it doesn't necessarily mean that anybody has access to your account.
For the contact, you will initially just receive an acknowledgement email, the proper reply may take 24 (possibly 48) hours.

My Sigma 17-70 f2.8-4DC is on the supported lens list but not in the Profile Downloader.

My Sigma 17-70 f2.8-4DC is on the supported lens list but not in the Profile Downloader.
How can I download the profile?
Thanks very much.

The “Lens Profile Downloader” is not where you get lenses “on the list”, rather it is where you get lenses that third-parties have provided, so usually for lenses not on the list.
I see three Sigma 17-70 f/2.8 DC variations for 5 different camera manufacturers so I’d expect you should see the lens listed if you select a raw photo. There is no profile for JPGs.
Here are the profiles for Canon:
Canon (SIGMA 17-70mm F2.8-4 DC MACRO OS HSM C013) - RAW.lcp
Canon (Sigma_17-70mm_F2.8-4.5_DC_MACRO_HSM ) - RAW.lcp
Canon (Sigma_17-70mm_F2.8-4_DC_MACRO_OS_HSM ) - RAW.lcp
What is your actual situation, are you looking at a JPG that won’t have a lens profile, or is the lens profile not in the list for your camera or is it just not being found automatically when you set Lens Profile Setup to Auto.

File sizes listed does not match the downloaded files

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

I am trying to download 92010NT from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html but the file sizes listed does not match the downloaded files. Is there any other page where I can download 92010NT.

Why Tools list does not include the widget "Arrange documents"?

Why in the Configurator’s Tools list was not included the widget “Arrange documents” from Photoshop’s Menu Bar? It would be great to find N-up view buttons in the Configurator’s Tools list in future.

Abufarzana, this is a user to user forum and noone from Apple is here to address your request. However, if you wish, you can submit your suggestion to the Apple feedback site at the following link: http://www.apple.com/contact/feedback.html

Goods Receipt not Increasing the Inventory and creating a variance instead

Hi Experts,
We have this situation in some of the goods receipts and not all of the goods receipts. In some Goods receipts, what is happening is:
1 - When we copy the goods receipts from the PO and add the goods receipts, the G/L account for Inventory Variance is Debiting instead of Debiting the the Inventory in that particular warehouse. I want to change the G/L from Inventory Variance Account to Inventory Account. I have checked all the settings but I am not able to understand why this is happening. I did the same Goods in the test server, everything was perfect. Like this we have couple of Goods Receipts that hit the wrong G/L. We use SAP Business One 2007A PL:08.
Any Idea why this is happening only to some goods receipts? Would greatly appreciate your earliest response.
Please let me know the checkpoints as well if possible. May be I am missing something here.
Thanks

Hi all ,
You can set other warehouse for that particular Item Or Create Duplicate Item From item Master and Delete old one and set quantity as per GL Or your requirement.
Thanking you,
Ganesh Mahajan

Zen Reporting Infoview not pulling the inventory info I want

I am trying to pull some useful Inventory information from the managed devices but the Report generated does not CONTAINS all the information I needed or at least not pulling the right information from the Managed devices (agents are installed) Here is the scoop: Reports -> Zenworks Reporting Server Infoview -> NEW -> Web Intelligence Document -> and here we can see the Universe Pane. The questions what to select to add item to the right pane so that I can generate some report that shows all the Inventoried pc (with agent installed) right now I selected and tried many attributes or items but only show the DNS, IP address and none of the HD, CPU, Serial number and Manufacturer and others on the GENERATED report. Here is the sample of the Reported generated for your review. It only DNS name, Machine name, Platform, machine GUID and the rest are NOT showing which were selected and there are: hard drive size, memory type and size, cpu type, vendor name and so and whole bunge of them.

jlau168,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Listing material not in the inventory

Similar Messages

Maybe you are looking for