Listing packages to update without updating.

Ok, here is the scenario.
I want to setup a cron that would run pacman daily, and send me the output as to which packages COULD be updated, without actually updating them.
something like pacman -Sy?
I don't know what to put in for the question mark. If I put in u, it prompts to actually perform the update. I just wan't to list what COULD be updated, not start trying to do an update.
Any ideas?
I could likely hack something together where I setup a script to run packman and then kill it after it stops generating output, but that is very ugly, and I would prefer to just have pacman output a list of potential upgrades, then just sent that to myself. This would be great for administering servers.

Proceed with upgrade? [Y/n]
As stated above, I could just pipe "n" to pacman, but that seems inelegant to me. I would prefer to have the package manager just output the potential changes without needing something like that. Must be just me though...thank god for open source.
Anyway, pacman -Su does not download updates from the repo anyway, so it would be fetching against outdated material..
pacman -Syu still suffers from the above fate, as well as the progress bar output if new package lists are fetched from the repo....
I guess this is just something that I alone think would be cool/useful. So be it. I will endeavor to make it happen for myself nonetheless.

Similar Messages

Podcast List view not updated with iTunes 11.3.1.2

Podcast List view not updated with iTunes 11.3.1.2
Windows 7 Enterprise Service Pack 1 / Intel-i7 2.40 GHz / 8GB RAM / 64-bit
iTunes 11.3.1.2
After refreshing my Podcast list, some Podcasts with new episodes do not display the "Unplayed" blue dot.
If the podcast "folder" is expanded by clicking the triangle, the new episodes are shown with a "Unplayed" blue dot.
A new episode is shown in the My Podcast view, with the correct number of new episodes.
The new episodes are displayed in the All Unplayed view.
I've tried deleting all episodes and downloading new episodes from the iTunes Store.
I've tried Unsubscribing and deleting the podcast, then Subscribing again from the iTunes Store.
Neither attempt resolved the issue.
I've seen this issue for a while, and was disappointed to find no change with the iTunes 11.3.1.2 update.

it finally worked; got my Rush 24/7 downloaded, and it finally found my iPhone after switching from the USB 4 port Hub to a dedicated USB 2.0 slot on my laptop.

API or Oracle Standard Package to update Payment Method for Invoices

Hi
Can anyone let me know if there is a API or standard oracle package to update PAYMENT_METHOD_LOOKUP_CODE column in ap_payment_schedules_all table ?
Regards,
Nagarjuna

Duplicate post -- API to update Payment Method

Recent files list is not updating after 10.1.13

Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer. If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update. The recent files list updates only if I open the file from the same drive listed under Network.

Hi Bert ,
You might want to report for a possible bug.Please refer to the following link for the same.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards
Sukrit Dhingra

10.8.4 Mac Mail Sort List Doesn't Update

In Mountain Lion 10.8.4's Mac mail program, I see the list on the left side doesn't update the list preview with the most recent email as part of that thread -- so it is difficult to lknow who the most recent email is coming from. For instance, if I send an email to a client, and I copy myself -- I get to see that copy in the list preview because it came into my inbox, BUT when the person responds to that email the list preview does NOT change to reflect the most recent sender of the email or the most recent snippet of the email. It shows that the email is unread -- but is misleading because it shows the sender as myself and a snippet of my email INSTEAD it should show the most recent sender and a snippet of the most recent message... is there a preference to change this or a patch to fix ?

Does anyone on the Mac Mail or OSX Support team have a solution to this...? You can easily miss emails at a glance if you lok in the list preview and that list has not updated to reveal a snippet of the latest email in the thread....thanks for your help!

Standard API or package to update the Table fa_mc_books_rates in FA in R12.

I should perform an update statement on fa_mc_books_rates. The package "MC_FA_UTILITIES_PKG" had a procedure for updating fa_mc_books_rates in 11i, but it doesn't have in R12. please let me know if you know the standard API or package to update fa_mc_books_rates.

Also I am new to Oracle FA and I have couple questions in it and please I need your help. I am doing my assets conversion from 11.0.3 --> flat files --> Oracle R12
through FA_MASS_ADDITIONS and Post mass additions program. If it's just converting the assets, it looks pretty straight forward, but my questions are:
1. I have to also convert relations like Parent-Child-Grand child and we cannot convert all the assets along with these relations because the dependent assets
might not exist before and I am thinking of using PARENT_MASS_ADDITION_ID for that purpose, but I am not sure as Oracle says not to use that column.
I need your suggestion how can we achiene this.
2. I also need to convert my project related information like PROJECT_ID and TASK_ID but oracle says I cannot use PROJECT_ID in FA_MASS_ADDITIONS, so I am
wondering if we have any update api which I can update the project information in the base tables for the assets after the conversion like a post conversion process.
Please advice me.
Thanks in advanve

I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?

I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?

I know how to do the updates. What I dont know is what size each update that I have completed was. I am having a data usage disagreement with my Telco and want to prove to them that this computer did not download the amount of data they are claiming it did.

List of new/updated/fixed features in 1.1.2?

Hi all,
Is there a website that list all the updates specifics of the 1.1.2 release? I mean what should I be expecting?
Thanks,

it may have already been there,,, but i just noticed we have ring tone options for New Text Messages... anyone else notice this or was this part of 1.1.1?

XAML editor failes, Package failed updates, dependency or conflict validation.Windows cannot install package App

Hi,
I have just installed Visual Studio Express 2013 update on Windows 8.1 OS, and started a new Windows Phone App project. When I'm opening a new XAML editor window, it fails with the following error message:
System.Exception
Package failed updates, dependency or conflict validation.
Windows cannot install package App.af631a335.af069.a4bf5.a81c7.af4c34f85cb29 because this package depends on another package that could not be found. This package requires
minimum version 0.0.0.0 of framework Microsoft.VCLibs.120.00.Debug published by any publisher to install. Provide the framework along with this package.
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateDesignerProcess(String applicationPath, String clientPort, Uri hostUri, IDictionary
environmentVariables, Int32& processId, Object& processData)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.ProcessIsolationDomain..ctor(ProcessDomainFactory factory, IIsolationBoundary boundary,
AppDomainSetup appDomainInfo, FrameworkName targetFramework, String identifier, String baseDirectory)
at Microsoft.Expression.DesignHost.Isolation.Primitives.ProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.HostUtility.Platform.AppContainerProcessDomainFactory.CreateIsolationDomain(IIsolationBoundary boundary)
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.Initialize()
at Microsoft.Expression.DesignHost.Isolation.Primitives.IsolationBoundary.CreateInstance[T](Type type)
at Microsoft.Expression.DesignHost.Isolation.IsolatedObjectFactory.Initialize()
at Microsoft.VisualStudio.ExpressionHost.Services.VSIsolationService.CreateObjectFactory(IIsolationTarget isolationTarget, IObjectCatalog catalog)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.Isolation.IsolationService.CreateLease(IIsolationTarget isolationTarget)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.CreateLease(IIsolationTarget isolationTarget, CancellationToken cancelToken, DesignerServiceEntry&
entry)
at Microsoft.Expression.DesignHost.IsolatedDesignerService.IsolatedDesignerView.CreateDesignerViewInfo(CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.InvokeWithCulture[T](CultureInfo culture, Func`2 func, CancellationToken cancelToken)
at Microsoft.Expression.DesignHost.Isolation.IsolatedTaskScheduler.<>c__DisplayClassa`1.<StartTask>b__6()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
I Have tried repairing visual studio But no use.
I have unistalled all the things and installed again but no use . Please anybody resolve this issue..

Hello amanojkumar24,
I see a related error thread from here:
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/b6a66a5a-e3b4-4f1a-848e-c1a6b7668b31/desgin-mode-breaks-down-during-windows-store-application-windows-8?forum=toolsforwinapps
As you've already repaired Visual Studio but Visual Studio still reports the error for you, we need to look into the error info:
This package requires minimum version 0.0.0.0 of framework Microsoft.VCLibs.120.00.Debug published by any publisher to install.
So here we need this package "Microsoft.VCLibs.120.00.Debug"
Please do the following:
1. Check your installation that you have enabled VC++ components. If you haven't or if you are not sure of it, please check this blog:
http://blogs.msdn.com/b/vcblog/archive/2014/08/01/c-runtime-for-sideloaded-windows-8-1-apps.aspx
Then you can download and install the package from
here.
2. You can also make sure you've registered and already have the license:
http://stackoverflow.com/questions/20010421/vs-2013-xaml-editor-and-microsoft-vclibs-120-00-debug
Someone fixed it by using this solution.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hello, I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13..

Hello,
I have a iPod touch 4g,last time when I paired with my friends iPhone it showed his iPhone's name along with devices connected earlier in the bluetooth list after I updated my software to ios 5.1 the names of friends devices appear as D1:FG:12:13:AK something like that and all the other previously connected devices appear in this same form in the bluetooth list how do I fix this back and it is confusing to connect to a device with no name but some unknown Bluetooth address so how do I find the device name back????
SO PLEAZZZZZ HELP!!!!!

An iPod can only pair with an iPhone for internet sharing provided that the iPhone has the subscribed to the tethering plan. The BT profiles do not permit file tansfer between IDevices by BT. The only BT pairsin is by app and those ar for peer-to-peer gaming.

Need to send email to email addresses in one list when list 2 is updated

I have 2 lists
list 1 has email addresses
the 2nd list is actually a document library
what I was wondering, is how can I send an email to people to people in list 1 when list #2 is updated with new documents?
i have been trying different ways of doing it, but no luck....
anyone have any ideas how to capture the email address from list 1 and send them an email when list #2 is updated?
seems straight forward but cant find the logic...

Hi,
I would suggest you to go for custom event receiver using visual studio. Its an easy way.... try it out.
Choose List item event in event receiver settings.
Step 1:Add item was added and item was updated event. Use caml query to fetch email address and loop through the collection and send email using SPUtility. Refer below code.
/// <summary>
/// An item was added.
/// </summary>
public override void ItemAdded(SPItemEventProperties properties)
//base.ItemAdded(properties);
using (SPWeb web = properties.OpenWeb())
SPQuery query = new SPQuery();
query.Query = "<OrderBy><FieldRef Name='Title' Ascending='False' /></OrderBy>";
SPList emailList = web.Lists["List1"];//The list which has the email addresses
SPListItemCollection listItemCollection = emailList.GetItems(query);
foreach (SPListItem item in listItemCollection)
SPUtility.SendEmail(web, true, false, item["emailAddress"].ToString(), "Your Mail subject", "Your mail body");
/// <summary>
/// An item was updated.
/// </summary>
public override void ItemUpdated(SPItemEventProperties properties)
//base.ItemUpdated(properties);
//you can provide same code here..if needed.
Step 2: Provide the list2(document library) path as the ListUrl in Element.xml
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Receivers ListUrl="/list2/"> 
<Receiver>
<Name>EventReceiver1ItemAdded</Name>
<Type>ItemAdded</Type>
<Assembly>$SharePoint.Project.AssemblyFullName$</Assembly>
<Class>SharePointProject1.EventReceiver1.EventReceiver1</Class>
<SequenceNumber>10000</SequenceNumber>
</Receiver>
<Receiver>
<Name>EventReceiver1ItemUpdated</Name>
<Type>ItemUpdated</Type>
<Assembly>$SharePoint.Project.AssemblyFullName$</Assembly>
<Class>SharePointProject1.EventReceiver1.EventReceiver1</Class>
<SequenceNumber>10000</SequenceNumber>
</Receiver>
</Receivers>
</Elements>
Deploy it to your SharePoint farm..make sure the feature is activated..and enjoy..
Probably this should work..Check it out and let me know..
Regards,
Dinesh

HT5824 my contact list does not update to its current state. After I sync to Itunes or after I back up to I cloud Also I did a doccuments and data restore and it still didnt change. How do I fix this?

My contact list does not update to its current state after I sync it to itunes or back it up to icloud I did a documents and data reset and the contact list still didnt change.. How do I fix this?

Welcome to the Apple Community.
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Purchased list can't update

Open My Purchased list, there are some apps in there.
But when I bought apps again, the purchased list can't update. The purchased list has no change. The app I bought can be download, but not appear in the Purchased list .
I have already authorized to my computer. MAC or PC all appear this question.
I don't know what to do.

but not appear in the Purchased list
Maybe the apps have been hidden inadvertently ...
Launch iTunes on your Mac. From the menu bar top of your screen click Store > Sign In
Now click your Account name in the account area right side of the iTunes Store window.
That will take you to the Account Information window.
Now click: View Hidden Purchases

Mavericks update not listed in software updates on server

I have several Mac clients enrolled with OS X server. They are set to look to this server for software updates to reduce bandwidth usage. When they search for the update, it is not available. The 10.9 update is not listed in Software Updates inside of OS X Server.app. Any ideas on how to import that so my users can download it?

A generational OS upgrade like Lion to Mountain Lion, or in this case Mountain Lion to Mavericks has never (and still is not) been counted as a software update and hence is not available via Apple Software Update Server.
Even though it is now free it is still done via the App Store. If/when a Mavericks update comes out e.g. 10.9.1 this will only update earlier Mavericks versions so will not help you. However as Mavericks is free for all compatible Macs the following are solutions you should be able to use.
Greg Neagle of Disney Animation Studios and the author of the administration tool Munki, has written another tool called createOSXinstallPkg which will let you take a full operating system as downloaded from the App Store and convert it in to an installer Pkg file which you can 'run' on a Mac to do an operating system upgrade.
See http://managingosx.wordpress.com/2012/07/25/son-of-installlion-pkg/
I don't know if it has been tested or if it will work but in theory it would do Mavericks as well as Mountain Lion. You could therefore (hopefully) use it to build a pkg and push it to your clients via for example Apple Remote Desktop Administrator or Casper or something else.
In terms of bandwidth saving, while as mentioned above a Mavericks upgrade is not available via Apple Software Update Server and therefore running your own SUS will not help, you can run Apple's Cache Server which is another module in Server.app this will cache downloads from the App Store including the Mavericks download and thereafter anyone else requesting it will get it from your local cache.
See http://krypted.com/mac-security/the-new-caching-service-in-os-x-server/

Content distribution issue with message "Found package properties updated notification for package '00000123'"

I've got strange issue with 1 of my primary sites that started just recently. I've updated the content of 1 package and this now needs re-distribution to all DPs. I've got 3 primary sites and on 2 of those the update succeeded and my DP's got
updated correctly. One primary site it does not work and checking distrmgr.log I can see following message every xx minutes
Found package properties updated notification for package '000008B7' SMS_DISTRIBUTION_MANAGER 6/21/2014 12:00:31 AM 5836 (0x16CC) ==>
Checking Pkgxfermgr.log does not show anything either, I've tried with 2nd application but again the same result it only shows the the notification message.
I saw similar issue yesterday but with restart of the sms_exec service it eventually distributed the content, obviously this is not something I like to do too often.
does anyone have idea what this could be, suggestions are welcome. Thx.

Jason, I've checked the flow from the CAS down to the primary below is quick overview. The package I'm testing is just small package that we use to check replication is working in our environment it's less then 1MB in size and we run it
1/week basically update content and then check monitoring-content distribution that it has been received on our 260 DP's around the globe
CAS (Located in the US EST Time zone)
Distrmgr.log 11:25am update package and needs to be send to 3x primary sites (A00; B00; C00)
sender.log 11:30am all 3 primary sites have received the content.
C00 (Primary site in Singapore having the issue)
distrmgr.log 11:27pm received notification of the package
despool.log 11:32pm packaged content extracted successfully
distrmg.log started to see message Found notification for package '000008B7' and followed by next message
Package '000008B7' (priority 2) is already in queue.
This goes one until 1:21am (Singapore time)
Start updating the package 000008B7... SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
The Package Action is 1, the Update Mask is 160 and UpdateMaskEx is 0. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Use drive G for storing the compressed package. SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
Successfully created/updated the package 000008B7 SMS_DISTRIBUTION_MANAGER 6/21/2014 1:21:45 AM 8296 (0x2068)
STATMSG: ID=2311 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SG-INTRA100.na.pg.com SITE=C00 PID=10132 TID=8296 GMTDATE=Fri Jun 20 17:21:45.848 2014 ISTR0="000008B7" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="000008B7"
After that nothing anymore.
When I check monitoring - content distribution I can see the package being updated/distributed to 80% of my DP's and last 20% are the dp connected below this Primary site.
To add to the confusion, there was another package distributed around the same time, and then one actually made it to the remote DP's.
This is first time I see this issue.

Listing packages to update without updating.

Similar Messages

Maybe you are looking for