Lite 9i: A suitable solution? ...who has expiriences?

hello everyone!
we are researching if oracle lite 9i is the most adequately solution for our upcoming project. I hope ypu can help me though I am not familiar with oracle lite.
Summarized, our project is a distributed applictation (programmed in Delphi). This application is designed for data capture purposes and should be deployed to multiple remote centres. A database should be deployed along with this application In each of these centres, where the data should be kept.
Another requirement is that the data (also metadata of the application) of each centre should be synchronized with a central database (Oracle 9i EE) located in my company. Also I have to say that it will be mandatory neccessary that the installation/configuration effort of the lite database has to be extremly low, though its not guaranteed that IT specialists are avialable in every centre.
(hope I explained that well enough :-)
What do you think, is oracle lite 9i generally a suitable solution for this problem?
Thanks for any replies!
Kat

Hai kat,
I am a developer of applications in Oracle9iLite. It is a powerful application where in which the data and application is resides into the client place. After synchronization , the client data gets updated with central server.
we are doing imports/exports business in Agricultural commodities like cashew, pista, coco, timber around the world. Mainly we are concentrating on african countries like ghana,ivorycost, benin etc., Our headoffice lying at Singapore. There we have using 8i mounted with Oracle9iLite. we developed applications and published it in the central server, the clients are download their applications using their snapshot values( Like countrycode, companycode, branchcode etc.,). Then they start entering data and try to sync in the end of the month, so the client data get updated with out server at S'pore.
Lite gives the perfect solution for our business requirements.I hope it will help u out in u r business too.All the Best.
Regards,
Anbuseelovan.
[email protected]

Similar Messages

For the second time this week the sound on my iPad 2 doesn't work. Who has the solution for this problemen?

For the second time this week i don't get any sound from my iPad 2. Who has the solution for this problem?

Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

The resolution ***** on 1080 tv? Who has an actual solution?

I am running an LD-2480 Westinghouse LED TV. Fonts look like crap. Yes I have spent multiple hours trying to figure out why this Mac mini ***** with this monitor! Hooked up 5 year old windows computer through analog VGA and what do you know?? A perfect picture! Is it the crappy driver? The HDMI settings? I know everyone is having these problems. Who has a solution?? Again, it is not the settings on the monitor (tv) or the sharpness setting that some of you seem to think works.What is the fix???
APPLE _ ***!!!!! FIX THIS PROBLEM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

This is a user to user forum. So no help from Apple here. Go to Apple menu -> System Preferences -> Displays, and modify the color settings to one more optimized for your use. Also see if getting a better HDMI cable will help. I have found many HDTVs have varying ways of adjusting the height and width pixel by pixel. Using a progressive display resolution with a 1080p on your TV is probably best bet. A few TVs are kind of sensitive, and you need to optimize with software such as DisplayConfigX or SwitchResX.

Who has deleted emails from shared mailbox ?

Hi Guys,
We have a shared mailbox and is accessed by more than 5 users.
Some one did something and the emails got deleted. I see them in recoverable deleted items folder.
Can anybody let me know how to find out who has deleted them ?
FYI - we do not have auditing enabled on this mailbox prior to deletion.
But using the MFCMAPI, I was able to figure out the last modification time (which is same for all the emails in this folder)
So, I think, if we can find who accessed this mailbox during that particular time, I will be near to solution.
Can you guys let me know how to check who accessed the shared mailbox at a particular time ?
Thank you in advance.

Hello,
If you did not enable the mailbox auditing logging for the mailbox, I am afraid there is no event to record the operations.
Mailbox audit logging
https://technet.microsoft.com/en-us/library/ff459237(v=exchg.150).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Is it time yet for Microsoft to "Recall" Office 2013 and provide anyone who has a 2013 license a replacement Office 2010 license?

The interface is terrible and can't be changed. Every application in the suite locks up/crashes nearly constantly on any machine it is used on. The activation process is terrible and wastes hours of any support/IT dept's time. From a 'privacy
standpoint', the software is seemingly criminally intrusive. It is clearly a product that should never have been released and is so far from functional that it can't be repaired by any 'service pack', 'hotfix', or 'patch'. It needs to be completely
scrapped.
The only 'redeeming quality' of this software is that the guy who was in charge of creating it is gone from Microsoft. (Unfortunately, he is now President Obama's appointee for running the attempt at repairing the 'healthcare.gov' website...
out of the frying pan... )
When the software is installed using one profile (domain or machine account) and a different profile tries to use the software, it requires 're-activation' - which often fails because the software believes it has been installed multiple times. (This is particularly
frustrating because it has to be installed by an administrative user, but most of the time, the person who 'uses' the software is not the 'administrator' - so it is almost always being 'installed' using one profile and 'used' using another profile).
The necessary intrusion into privacy created by the requirement of a "Microsoft Account" to use the software is seemingly criminal.
The tracking of, and installation of licenses is absolutely ridiculous.
An example:
Many of my clients have many users and many computers (up to 75 or so).
I could create a "Microsoft User Account" for each 'user', but these machines get moved between users, and the software license is tied to the 'machine' and not to the 'user' so as soon as that happens, the licenses and the users are no longer
in line and become impossible to track.
I could create a "Microsoft User Account" for each 'computer'... and I can't even count the ways this would be a nightmare to try to track.
I actually did that up front for one client, and created Exchange email boxes for each computer so that "prove you are really you" emails from Microsoft could be received managed, and responded to, and passed out second usernames and passwords
to all of the users so they could "log-in" to their Office 2013 software, and created a database of the 'computer usernames and passwords' so I could track this... unfortunately, this confused the users (as it rightfully should) so they would change
the passwords for their computer's 'Microsoft User Account' thus locking me out and invalidating my database, ... and... CLUSTERF#%K!!!
As a 'best - worst case', I have had to create a single 'Microsoft User Account" for each of my clients' businesses so I can install and activate Office 2013 products. This is a whole new set of "Awesome Stupidity".
Now, I can put a new computer into a client's office and install their new license key for their oem Office 2013, and it shows up in the 'business's Microsoft User Account'. Then when I give the machine to the user, I get to 're-activate' the software
(hoping that it doesn't tell me to piss-off - which happens about 40% of the time. This is a process that can only be described as a "feat of engineering created by a group of monkeys whose former jobs included 'janitor at MAD magazine headquarters'
or 'beer-pong referee').
It starts with two hours of pressing phone buttons and ultimately talking to someone who tells me "yeah, nothin' I can do about that I'm just here for product activation" (which, incidentally, is done by machine until you pass through MS's ridiculous
labyrinth of repetitious keystroking until the machine is convinced you are just too stupid to punch in the right numbers and allows you to talk to a person... who then asks you for the exact same set of numbers and repeats back the exact same responding set
of numbers and acts dumbfounded when it still doesn't work - since it didn't work the first six times you punched or said it into the phone) followed by "I need to send you to the support group... but because it's 6:30 pm (in a process you started at
3:00pm) they are gone for the day and you'll have to call back on Monday morning"
At some point in the process, you get to log into the "Microsoft user account" and 'roll the roulette wheel of stupidity' by trying to activate the right software from a list of 40 different lines that all say "Microsoft Office 2013 Home and
Business oem", but none give any indicator or differentiating factor like for instance: license key, date installed, license key last 4 digits, mother's maiden name, phase of moon when software was first activated, color or type of blood of the user's
paperboy's dog's previous owner... NOTHING... RANDOM FREAKING STAB IN THE DARK - pick one, any one, hope its the license you are trying to install onto this machine, 'cause if not, you very well may kill the product on some other machine.
So through the process, the lucky support staff person gets' to waste roughly an hour and a half on average for every Microsoft Office 2013 installation. I have actually had to start telling my clients that they are going to likely have to pay an extra
$100 or so per machine in order to get their new Microsoft Office software which comes on their new computer activated - that number tends to work out roughly accurately - except that it is a terrible way of trying to 'please a client'.
Oh,... and did I mention... "THE SOFTWARE CONSISTANTLY FAILS"!?!
A client tries to open a document that they have been using for 8 years and Excel doesn't say "Hey, I don't know how to deal with some element of the file that you put in here using Excel 2003, or Office 2010 (both products, by the way, which worked
great) - no... instead,... it crashes. Doesn't really do any damage to the file it choked on, but the work you'd been doing on three other files which you also had open,... yeah,... that work is gone.
Yeah,.... over time, I have developed a pretty consistent spiel for client's needing new computers that goes over how absolutely terrible Office 2013 is, and explains that our options are further limited by Microsoft's yanking of all Office 2010 or previous
products from market availability, and explaining the merits of both LibreOffice and OpenOffice, as well as their drawbacks. I also have a strangely static response explaining how "larger companies are not burdened by these issues because they are
able to use MOPL which allows them to downgrade their productivity software to Office 2010 so they can continue to function happily, but this is really not a cost effective solution for smaller companies who primarily buy oem Office products with their replacement
computers".
Unfortunately, many clients still decide they want to go with Office 2013 because they apparently believe "it really can't be that bad". The value in my 'presale descriptions' are only really realized when they come back to me a week, two
weeks, or up to a month after the new machine is in place and say "wow,... you were right". The place I am left open for any further problems is when I don't impress upon them beforehand just HOW BAD OFFICE 2013 REALLY IS. In that case,
they still come back to me as though I have done something wrong foe selling them this piece of $#!% software and I have to remind them of our previous discussions.
Strangely, far too few heed the warnings and buy the software anyway - but the discussion has saved many clients the costs of Microsoft Project, because the discussion of LibreOffice and OpenOffice nearly always leads to at least a small philosophical conversation
about 'Open Source Software' in general, and my absolute favorite descriptive analogy in that discussion is to compare Microsoft Project at $600 v. ProjectLibre at $0 - and then further describe the costs of licensing and implementing the associated back-end
server solutions, etc.
This is a saving grace for me, because even though the client has been saddled with Office 2013, they have also saved substantially on Project and it is a rare (but granted, not absolutely absent) occasion that ProjectLibre is lacking some feature or function
that they actually need or want to use - and on those occasions, finding out has cost them absolutely nothing in software purchases.
Its not surprising, I suppose, that clients have grown to accept Office as a required 'cost', but still choke heavily on the price-tag of Project every time they have to buy it. The interesting thing to watch over the coming couple of years will be
'how many businesses stop accepting MS Office as a 'required cost' due to the failing of the software itself and the fact that most are being burned, at least once, by purchasing the software "against technical advice" and are learning, merely by
virtue of HOW BAD Office is, that there are other options out there that both cost less and work better... I mean,... LOTS BETTER.
How many businesses that are used to accepting the cost of Microsoft Office as a cost of doing business will be moved over to open source options and satisfied by them by the time Microsoft releases its next version - which will, presumably work - such that
they will no longer justify the cost of Microsoft's offering even if it is 'superior' to the open source offerings because the open source offerings are plenty sufficient and include a price tag of $0 and an installation/implementation time that is much, much
shorter than Microsoft's offering.
If Microsoft doesn't make some dramatic reparations, and do it soon, I expect their market share will be reduced in this area by a very significant margin.
I am suggesting either a 'Complete Recall' of Office 2013 including an 'uninstall 2013/install 2010' process driven by the automatic update engine, or at the very least, a free and easy downgrade rights offering for anybody who has already purchased 2013
and anyone who purchases it between now and the time the next "functional product" is released.

I understand the inconvenience you are experiencing when working with Office 2013.
If you have any feedback about Office 2013 product, click the and submit to Microsoft.
Microsoft will decide how to fix the problem for all customers.
For the activation mechanism, it intends to protect customers of their rights and interests.
For a retail version of Office, if it was purchased with a disk, Microsoft account is not necessary during the installation.
For volume license of Office, refer to the following link to deploy Office suites can be much efficient:
http://technet.microsoft.com/en-us/library/cc178982.aspx
For the problem Office 2013 keep crashing, check the following link to check:
http://support.microsoft.com/kb/2813143/en-us
http://support.microsoft.com/kb/2758592/en-us
Thanks,
Tyor Wang
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no
help.
If you have any feedback on our support, please click
here

How can I find out the list of users who has the access to IT 0008

All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.

combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS

How to identify the user who has created accounts,lead, Opp in portal

Hi experts,
I am working in CRM 5.0 now i want to know the user who has created a particular account, Lead, and opportunity in Portal not in GUI kindly give some inputs regarding this .
Thanks in advance
Amar

Hi Frederic,
Thanks for your reply.
But is there any way by which we can make it happen in PCUI.
The customer is very particular about it. They use only PCUI to create new accounts and they want a facility to view change history in PCUI Account Application itself. They are not interested to go back to GUI to know change history for that BP.
We have just checked whether any related BSP structures containing change fields are assigned to COMM_BUPA but not successful.
Kindly help with a possible solution.
Regards,
Amar

On my iPad, in iCal, whenever I attempt to go to March 2013 the application closes. I know of at least one other user who has the same problem. Has anyone else had the same experience

I am using an iPad.
In iCal, whenever I try to turn to the month of March, the app closes.
I know of at least one other person who has had the same problem.
Has anyone had a similar experience and know of any solution?

Chiave2,
Why does the month March 2013 not show...: Apple Support Communities, and Why can I NOT select March 2013 Month...: Apple Support Communities may provide you with a solution for your problem.

How to find who has changed SQL Server Agent 'Job History' settings.

Hi all,
I was searching from couple of days to know is there a way to find out who has changed the SQl agent property settings.
Like if someone unchecks the SQL Agent History settings how i can find who has done that change?
I searched for trace flags but there is nothing related to it, i searched for system tables and views of msdb but nothing which can give this information, even didn't find any audit setting that can monitor these activities.
My sql version is SQL Server 2008. Please throw your ides on how to track the sql agent history setting changes!!!
Thanks In Advance!!!!
VVinayPrasad

Hi,
You might be able to AUDIT the execute on that SP but its not giving exactly what has been changed... i guess you are getting what i am looking for...
whatever the property might be changed it only shows the sp name thats it.... but not the exact sql statement executed on background
VVinayPrasad
First of all: It's not about me, it's about you. And it's not a might, its a given fact. I
tested it for you.
Second: your question was:
>>I was searching from couple of days to know is there a way to find out
who has changed the SQl agent property settings.
>>Like if someone unchecks the SQL Agent History settings how i can find who has done that change?
So please first clear up, what you really need.
Third: instead of Auditing I already gave the advise to use Tracing (be it SQLTrace or Extended Events). Both will give you the exact statement. SQLTrace may be easier on SQL2008
Please try all of the provided first before doing guesswork.
Andreas Wolter (Blog |
Twitter)
MCM - Microsoft Certified Master SQL Server 2008
MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
www.andreas-wolter.com |
www.SarpedonQualityLab.com

Who has the labSQL can use in labview7.1?

hi, who has the labSQL data package can use in labview 7.1? Thank you
Solved!
Go to Solution.

Have you tried searching online? Here is the download, LabSQL.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How to check who has edited the meeting invites on calendar

Hi,
we are in exchange server 2010 environment. How do we check who has edited the meeting invites on calendar?
I tried with get-calendardiganosticlog. But no help..
Sankar M http://messagingdevelopment.blogspot.in/

First of all, I would like to confirm if you have
assigned any privilege
to someone as an Editor. If so, he/she would be able to change, edit or delete meeting requests. You may enable auditing for such changes that will help you to check the changes such as,
who was the person of changes. Please refer to this well described article that helps to understand this concern step-wise :
http://msexchangeguru.com/2011/07/14/outlook-meeting-vanishing/
Moreover, here is another good auditing resource (http://www.exchangeauditing.com/) that could be an appropriate solution to track such changes made in exchange server at granular level and get the captured
auditing data into real time.

When calling someone in handsets mode,couldn't hear anything until I turn it into speaker mode. Who has the same fault?

When calling someone in handsets mode,couldn't hear anything until I turn it into speaker mode. Who has the same fault?

I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

Question if i am the only one who has an hp15 with fan issues

don't mean to be rude but I would like to know if I am the only person who has issue with the fan not working at all
and also having wifi issues on hp15
i would like to know if this is a issue for most hp15 owners or is mine just a lemon

Hi @ms44 ,
Thank you for your query.
I grasp that your fan is not working and you are having an issue with your wireless.
Here are links that should be of assistance with these issues.
HP PCs - Troubleshooting Wireless Network and Internet (Windows 8)
Title: HP Desktops and Notebook PCs - Troubleshooting an Overheating and Auto Shutdown Issue.
If the issue should still remain please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

Hi;
No, there isn't a way for you to see anything about who has saved progress.
Thanks,
Josh

HT3819 How can I transfer songs from my ITunes account to my daughter's who has a different Apple ID but same account info?

How can I transfer songs from my iTunes account to my daughter's, who has a different apple ID, but the same account information?

Purchases cannot be transferred between different Apple IDs.

Lite 9i: A suitable solution? ...who has expiriences?

Similar Messages

Maybe you are looking for