Live broadcast feed on byu.tv does not work--I signed in, but there is no video nor audio feed.

During all five Sundays during last month, January of 2011, the live broadcast feed, during the live broadcast of the Mormon Tabernacle Choir's weekly program of "Music and the Spoken Word" from 9:30 a.m. to 10:00 a.m., Mountain Standard Time--both streaming video and audio--after my signing in to byu.tv's live broadcast site, worked. Starting the first Sunday of February, 2011, which was February 7th, however, and SINCE then, I have not been able to get their live broadcast feed to work, nor at the time of the Tabernacle Choir's live weekly broadcast, nor at any other time.

Try to clear the Flash cookies and settings.
Flash Website Storage Settings panel:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
See also Flash Local storage settings:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Similar Messages

HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

Google drive does not work with specific group but works with all users group!!

Hi,
Why Google drive does not work with specific group but works with all users group?
My rule : Internal > external > all users = works fine
But
Internal > external > A group = not working !!

Hi,
if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
http://technet.microsoft.com/en-us/library/bb794762.aspx
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?

I have aperture 3.4.4, which does not work with Yosemite. Is there a way to upgrade my Aperture version, or do I have to buy Aperture again?

If you own any version of Aperture 3, you are entitled to a free update. Only it can be tricky, if your version is not associated with your AppleID, because you bought it with a serial number.
Have you checked, if you can see an update at the App Store Updates page? Or an "Accept" button on the Purchases tab of the app Store?
Contact the AppStore Support and request a redeem code, to be able to buy the update for free. You will need to provide a proof op purchase of Aperture.
Use this link: http://www.apple.com/support/mac/app-store/contact/
Apple sent redeem codes for Aperture 3.6 to several users who had bought the version on disks, if they could provide a serial number. See for example this discussion: (The post marked as the solution)
Re: Aperture update not possible after update to Yosemite
It is really unfortunate you missed the window of opportunity with Mavericks MacOS X 10.9.5, when the update was easy.

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouse

I want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!!

Alum BT keyboard does not work after wake up - but BT trackpad does!

Here is my set up:
MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
Desktop set up (same at work and home)
- Thunderbolt display
- Aluminum Bluetooth Keyboard
- Aluminum Bluetooth Trackpad
What I do:
- Plug in the sleeping mbair into my display via thunderbolt and power cable
- Wake up using external bluetooth trackpad
- computer wakes up and external trackpad is functional (it always works)
- 7/10 times the external keyboard will not connect to enter password to get into system
     - I have tried power button banging on it for a long time and does not work
     - open mbair and type password in and remove keyboard and repair and after several tried it will work
     - then I can close mbair and use external keyboard
     - painful to do this most days at home and work
What have I tried
- PRAM, SMC reset
- remove all BT entries - trash blutooth properties files and freshly add them back
- I have tried waking using keyboard as well and it does not work
Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
Yes I also have the occasionaly wifi not connecting from sleep issue

Hello
Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

Printing does not work in OSX applications, but did work in OS 9

As the name of this thread implies, I cannot print from any OSX applications, but printing does work in OS 9 applications. I recently upgraded to Adobe Creative suite 3 (I know, i know, I am behind) and have had nothing but problems printing (even with native apps like preview). Before I upgraded I didn't have as many issues printing. Since the upgrage, When I attempt to print from Adobe Illustrator I get the error message "cant print the illustration". When I attempt to print from native MacOS Apps (like Preview) I get the error message " Error while Printing". Additionally, every time I attempt to use my scanner I get the error message "Scanner not found". Can anyone help me out there?

It would have been helpful if you had included the manufacturer and model of your printer and scanner along with details on how they are connected to your Mac. Without that information there's little else for anyone else to work with along the lines of assisting you.
How does your printer and scanner connect to your Mac - serial port or USB? If they use a serial port you're kind of out of luck as Mac OS X does not natively support serial ports. There may be some third-party software drivers available that could "turn on" serial ports within Mac OS X however.
If your devices connect via USB, have you installed the Mac OS X version of their drivers? Older USB-equipped printers and scanners may not be supported by their manufacturers for use with Mac OS X. Again, if one looks hard enough, there may be some other third-party or open source drivers available that may let older USB equipment work with Mac OS X.

Touch pad scroll does not work in firefox minefeild but works in firefox 3.7

Love Minefeild, but have notice that my touchpad scroll up and down does not work. This function works fine in Firefox 3.7 and other software. I am using the lastest nightly builds. Is there a solution?

Sounds like your scroll pad drivers need to be updated, but considering that Firefox 4 is months away from being released the new drivers might not be available yet. Check with your manufacturers website in the software / drivers downloads section for newer drivers.

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

The rss feed for trending questions does not work?

All I can get is unformatted postings for the RSS feed for "trending questions" and this is the error message
" XML file does not appear to have any style information associated with it. The document tree is shown below."

Hi,
-are you getting this information every time you try to visit the page?
-Have tried it in another browser?
Thanks
Kapil Malik

Screenshots does not work, Grab captures nothing but white.

Recently replaced hard drive with a new SSD. Everything is fine but screen captures currently do not work. I can hear the click, see the target when doing command + shift + 4 but no file is created. Also grab runs but only captures blank white area. Thoughts?

Yes its known issue to apple and they are working on it. Same issue with my apple store.
Mac App Store does nothing when I click download on any App

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Batch process does not work in one service, but worked in another.

Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.

We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000

Data Re-Import does not work for some records stating there are duplicates

This is CRM 2011 Rollup 6
The same as this link.
https://social.microsoft.com/Forums/en-US/2a792269-0094-4673-9760-5178e16299d3/cant-import-xml-for-update-operation-because-a-record-was-not-created-or-updates-because-a?forum=crm
Thousands work, hundreds do not with the failure code "A record was not created or updated because a duplicate of the current record already exists.
Is this a data integrity issue in CRM and the same GUID is in use?
I do get a partially imported record for the import, but the data is not updated.

I am trying to update my Account records by exporting them and re-importing. I have been successful with re-importing many thousands of records but there are some which are refusing to be updated. The error I get is "a record was not created or updates
because a duplicate of the current record already exists".
This doesn't make sense to me because I'm selecting the option to prepare the data for re-import: "Make this data available for re-importing by including required column headings."
I can't find anything special about these records nor did I find anything special about the records that
were successfully imported.
Thanks.

Live broadcast feed on byu.tv does not work--I signed in, but there is no video nor audio feed.

Similar Messages

Maybe you are looking for