Live Corners - Change one corner individually - I've tried what the tutorials say to do
Live Corners: I can't change only one corner at a time when holding alt/option while clicking (or when I click and drag) the widget with the direct selection tool. Instead it changes all the corners at once. How do I get it to change one corner individually?
Agreed, the steps in the video cannot be reproduced faithfully in the current software (18.0.0). Granted when he talks about changing the radius of a corner independently he selects a control point. Earlier however he appears to change a single corner style with the entire shape selected. This I cannot do.
As far as I can tell there is no reason why the operation ALT/OPT + manipulation of the corner widget can't result in single control of that radius. The ALT/OPT key along with the white arrow tool doesn't seem to be any different than with no modifier key.
The tool is a very good idea on the whole but the intuitive approach should be the one that works.
Similar Messages
-
Why can't I "change one corner of rounded rectangle to a point"?
Change one corner of rounded rectangle to a point. This was in a recent emailing of InDesign Magazine's Tip of the Week. I do what it says but it doesn't work.
It says to draw a rectangle. I do. Fine.
It says to apply rounded corners. I do. Fine.
It says, "select the path you want to expand..." I don't.
The only path is the one that goes around the whole rectangle.
It sends me to Window > Object and Layout > Pathfinder.
Those choices don't exist.
So I never get to the later instructions.
I use ID CS v. 3.0.1.
Could these be instructions for a later version?
Or am I missing something?
Thank you.You need to select the rounded rectangle and the small rectangle that you'll be combining to use that technique.
There was also a script called CornerEffects.jsx that shipped as one of the samples on the disk (I don't recall anymore if CS3 installs them by default, but I beleive it does). You can apply the rounded corner to only some of the corners using that script, and leave others square. -
When I upgraded from v4 to v5 my bookmarks was lost. I do have the one that is in the firefox toolbar. Apparently I had a bookmarks add-on. V5 changed my browser how can I determine what the program was and if the bookmarks are still there?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Websites remembering you and automatically log you in is stored in a cookie.
*Create an allow Cookie Exception to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
*Tools > Options > Privacy > Cookies: Exceptions
In case you are using "Clear history when Firefox closes":
*do not clear Cookies
*do not clear Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins. -
In Photoshop Elements 11 attempting to blend two photos (layering one on another) I click on brush and get a smart brush which doesn't do what the instructions say it will do. I can get the eraser to do what I want. Why the confusion???
I click on brush and get a smart brush which doesn't do what the instructions say it will do.
The Brush tool (Keyboard B) has several different brushes in the same slot. Right click on the brush icon and you will see them, or press B sequentially.
The Smart Brush tool (Keyboard F) has two items in the slot.
Since you did not provide reference to "the instructions", it is difficult to remedy the "confusion." that exists.
I suspect that the recipe calls for a mask, and painting with a black brush to mask out certain areas.
It would help if you post the instructions and what your goal is with more specificity. -
Hi everyone,
I recently got fcpx and i am having lots of trouble trying to put in a text. When i choose a text to put on top of a clip, i am not able to change what the text says. I am not even able to highlight the text on the screen. There is not text box on the text tab where i am also able to change the text.To make what Tom said, a little clearer, press 'A' then double click the text box in the Viewer window, and type into there.
Andy -
help! my imovie project library is full of temporary folders.. some are the ones i deleted.. i tried deleting the folders one by one but when i try to open the imovie, the folders keep coming back to my project library..
If it was working on 10/1, why not open up the most recent backup library with a timestamp of that day. Unless you specified otherwise, your backup folder is in Movies in your home folder. You can double-click one to open it in FCP.
The update command actually wants a mounted drive selected.
I suggest not going into the library bundles and moving or modifying folders/files except as a last resort. It sounds like both libraries are corrupted.
Russ -
For the past week or so, I have made changes to the calendar on my MacBook Pro. The changes do not "stick" on my MacBook calendar and do not sync with any other device (iPhone or iPad). I just can't figure this out. Anyone have any suggestions?
By everything, I am assuming you have tried resetting the SMC (http://support.apple.com/kb/HT3964) and PRAM (http://support.apple.com/kb/ht1379). If you haven't tried this yet, please do!
See the following support document as well: http://support.apple.com/kb/TS1367.
The update you're talking about was the firmware update. Hopefully resetting the PRAM gets you up and running. Try resetting it 3 times in a row (hold the keys down until you hear 3 startup chimes).
Message was edited by: adamb529 -
My Apple wireless mouse only scrolls one way. I've tried cleaning the
My Apple wireless mouse only scrolls one way. Any ideas on how I can set it up so it scrools up and down?
I am having the same problem also. I've tried cleaning the ball, but still not working. This happened a couple of times before....and by accident I hit some button and it started working again. So frustrating........sorry I'm not any help. Just venting.
-
I want to change my region App Store I tried all the instruction but it won't working help needed
I want to change my App Store region from Kuwait to the U.S I tried so many time but is not working
Does this help?
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311 -
Changing panels on a frame depending on what the user clicks
I'm making a small application with a JFrame and some JPanels.
When the application starts a start panel is added to the frame where the user can press two buttons. If he presses a button, then a new panel must be painted on the frame. In the new panel there is a button for going back to the starting panel.
How can I accomplish this changing of panels? How does one panel give control to another panel? How can I let the frame control everything (if I should do that)?I guess just use CardLayout, CardLayout will solve your problem
-
Can you please help me get my music that I have recorded/loaded from CD's ...and purchased back on my new hard drive...
thanks!!!!!I used a program called sharepod when my hard drive crashed. it lets you add all the songs from your ipod/phone/etc back onto your pc.
http://www.getsharepod.com/
There is one for mac and one for windows. I hope this helps! I lost ALL of my music once and the second time i sure didn't want to again! -
I have got an ipad 2 cellular and wifi with latest ios 7.0.4 and am unavle to send any sms from it, can any one tell me why
iPads do support SMS messaging, just iMessages.
-
I need to take a picture of a web page, insert it onto a powerpoint online, and crop the picture. I am pressing the print screen button, and right cliking paste. But I am getting the warning message saying that my browser can not use the clipboard, and I am unsure of how to take a picture, then paste it, and crop it all on to a power point.
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
-
My phone got locked even though i didnt put a passcode on it what can i do to unlock it?
Hi I am not at the setup stage once the soft wear was updated I was never able to enter into my I pad due to the pass code needing to be entered.
-
Problems with FaceTime and iMessage, not activateD
Are you using a supported carrier? See this list for supported carriers: http://support.apple.com/kb/ht1937
FaceTime/iMessage use SMS messages sent to Apple's servers in the UK. If you are using a supported carrier and your account is properly provisioned for an iPhone, you should have no problem. If you are using an unsupported carrier, they may be blocking the international text message used for activation.
Maybe you are looking for
-
Database Upgradation from oracle 9.2.0.8 to oracle11gR2
Hi we are using AIX 5.3 TL 10 SP4 and we are upgrading DB from oracle9.2.0.8 to oracle 11.2.0.2 i am having some doubt from below pre-upgrade scripts out put. oratst@ebsdevdb on /tmp # sqlplus "/as sysdba" SQL*Plus: Release 9.2.0.8.0 - Production on
-
Can connect to Wifi but not LAN internet with iphone 6
Hello from Australia. Ever since I brought my iphone 6 home, I have been plagued with Wifi issues. All of my idevices have lost internet connection, even though they can be connected to WiFi via Airport Express (2nd gen). My internet is a LAN ethern
-
Pdf files changed by howdecrypt virus.
Can pdf files be fixed after the howdecrypt virus attacked them? I've been able to fix some AutoCad files but pdf seems to be a challenge.
-
Can I retrieve cursor's value with variable columns?
I have a loop to check a bunch of columns in a cursor, I'd like to use a variable columns like following: cursor cur while .... loop cur.XXX end loop; here XXX are dynamical generated VARCHAR2. Could you please tell me is it possible, or not? Thanks
-
Hi everyone, I have a master package that executes a few dozen child packages. I have an OnError handler set up at the top level of the parent package. I want to capture the name of the failed child package, is this possible? I just want to log the f