Live Video encoder for Mac.  Does it exist?

Looking to d a live video stream. Would like to use Vp6 I do not think Adobe had a Flash video encoder for the mac.
As always, thanks for your time and help.
Mike

There is no Airscan :-)
but you can scan wirelessly on any your OS compatible network scanner of MFP printer with a scanner.
This has to be connected to your network either via WiFi or Eth cable.

Similar Messages

  • FLV video encoder for intel macs

    The Flash 8 Video Encoder is installed on the system - iMac
    intel duocore (the most recent version) and OS X 10.4.8 - but the
    encoder does not show up in Quicktime Pro. The same thing works
    fine on Powerbook G4.
    Is there a special Video encoder for mac intel
    systems?

    Try Sorenson Squeeze Suite 4.5
    Click Here for
    Reviews
    I've tested it in a trial version for converting my DVDs and
    etc. on my personal website.
    Click Here for some
    SAMPLES I did.

  • Newbie: Flash tried to play a live or recorded stream that does not exist.

    Hello there,
    I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
    In the Flash  software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
    Too, when I try and open the html with the stream in a browser, nothing appears.
    What should I check?
    Thanks.
    Kind regards,
    Marius

    So just to clarify, the server is installed on the same machine that you are using to do the encoding, correct?
    And you are using Flash Media Live Encoder to do the encoding?
    I don't have Flash CS5 for I'm not sure what is in there to do the encoding.. but more on FMLE here:
    http://www.adobe.com/products/flashmediaserver/flashmediaencoder/
    There are two step used to get the encoding going with FMLE...
    1. after setting all the config settings, click the "Connect" button. Then open the encoding log and you will be able to see if connection was made to the server or not. Can you successfully connect to the server? if not, what is the error message?
    2. click the "Start" button and in the encoding log, you will see that the audio and video encoding has started. What does the encoding log say?
    Best wishes,
    Adninjastrator

  • Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

    NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
    Hello there,
    I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
    In the Flash  software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
    Too, when I try and open the html with the stream in a browser, nothing appears.
    What should I check?
    Thanks.
    Kind regards,
    Marius

    Thanks for your reply.
    Server, encoder and player are all on the same computer.
    Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
    Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
    Thank you for your time.
    Kind regards,
    Marius

  • Jerkyness observed when live video encoded on FMLE

    Hi All,
    I am trying to encode live stream using FMLE 3.2 on mac mini.
    Input is of 1.5mbps with 640x480. It is coming throgh canopus and firewire to mac mini.
    I have set my bitrates to
    1. 800kbps H264 main @3.1 resolution 640x480
    2. 500kbps H264 main @3.1 resolution 480x360
    3. 300kbps H264 main @3.1 resolution 320x240
    My FMS parameters are,  FMS URL:rtmp://localhost/live  , streamname : livestream%i
    The live video encodes fine when i have only 1 stream encoding. But jerkyness observed when i have 3 bitrates enabled on encoder. What could be the issue?
    I thought i can use FMLE to adaptive streaming.
    I will be using 3 different streams for pc and mobile. Please let me know if i have any issues on the encoder side
    Any pointers would be useful.
    Thanks.

    For VP6 MBR:
    640x480 size or below; 2 or 3 streams at 25 fps: Dual Core (Core 2 Duo 3GHz, 2GB RAM)
    768x576 size; 3 streams at 25 fps: 8 Core (Xeon 3GHz, 3.25 GB RAM)
    Input stream 640x480 @25 fps; 3 output streams: 76x144 @25 fps_150 kbps , 320x240 @25 fps_300 kbps and 640x480 @25 fps_700 kbps: Dual Core 3GHz, 2GB RAM
    For H264 MBR:
    320x240 size ( Main or base profile); 3 streams at 25 fps: Quad Core Xeon 2GHz, 4GB RAM.
    640x480 size ( Main or base profile); 2 streams at 25 fps: 8 core Xeon 3GHz, 3.25 GB RAM.
    768x576 size ( Main or base profile); 2 streams at 25 fps: 8 core Xeon 3GHz, 3.25 GB RAM.

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • Pinnacle Video Capture for Mac

    After talking with a bunch of salesmen (considering getting a DvD writer), I took the advice of someone in the Apple Store and bought a Pinnacle Video Capture for Mac to copy my laserdiscs. It was $100 before tax, and didn't do stuff I don't plan on doing anyway. I did spend another $25 to get an S-video cable.
    I installed the software and connected it up to my LD. I started capturing the movie, and selected S-Video (although in the small window they showed, I didn't see any difference between that and video out. I selected a max time from a limited selection, and let it record.
    After a while, I went downstairs and saw that the audio and video were not synchronized at all. I let it continue.
    After a while I came down again, and the movie was finished, so I stopped it. I found the MP4 - it was in the iTunes movie directory, and played it in iTunes. I fast-forwarded it to near the end, the voice and video were way off-set.
    I haven't tried burning this yet.
    Quicktime player doesn't think this is a valid movie file. I selected "open with" and "other" and the recommended applications had iMovie greyed out.
    Why in the world would the audio and video record at different speeds?
    Do I have to buy software to edit the movie down to the correct size?
    My Mac has:
    Model Name: iMac
    Model Identifier: iMac7,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.8 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 800 MHz
    Boot ROM Version: IM71.007A.B03
    SMC Version: 1.21f4
    I noticed the Pinacle Video Capture program was still running, so I tried to quit it, and got a window asking for my administrator ID and passsword to allow Pinnacle Video Capture to make changes. Why?

    The audio drifted out of sync because the Dazzle doesn't support locked audio. For short videos (say, under 10 minutes) this won't be very noticeable but when you capture longer videos it becomes progressively worse over time.
    What do you want to do with your Laserdisk copies? Watch them on your iPod? Edit and/or burn to DVD?
    A device like the Canopus ADVC-110 will do the video/audio conversion properly, keeping the audio and video in sync regardless of the length of your video. It converts to DV, not to MP4, and you would use it with iMovie or Final Cut (not iTunes). However you can export your video from iMovie or Final Cut to iPod/AppleTV formats.
    The Dazzle device will not work directly with iMovie or Final Cut.
    ps. If all you really want to do is transfer your Laserdisc videos to DVDs, it will be a whole lot faster & simpler to get a DVD player/recorder that has analog inputs and record directly to DVDs. There are many brands & models to choose from and many good ones are as inexpensive as the $100 you spent on the Pinnacle converter.

  • I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    Is this happing because the external is formatted to PC and not mac?
    Yes that is correct.
    Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
    If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
    You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
    Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
    regards

  • Who knows a free video downloader for mac?

    who knows a free video downloader for mac?

    Fast!? I just tried using Any Video Recorder to convert a .ts video file to quicktime for watching on my mac. After running 4 hours it converted 14 seconds of video. That means it will take 42 days to encode my 1 hour TV show. Something is definately wrong.

  • Follow-up posting flow type Credit for 870 does not exist

    Hi SAP,
    I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
    Diagnosis
    You have changed the data in such a way that follow-up postings have resulted.
    No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
    System Response
    Processing cannot be continued without the flow type.
    Procedure
    Contact your system administrator.
    Procedure for the system administrator
    Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
    Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
    TQ
    Regards,
    Nazrul

    Hi Nazrul,
    yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
    SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
    Relevant relationship keys are:
    2     IS-RE: Follow-up postings due to condition incr.
    32     IS-RE: Follow-up posting due to condition reduct.
    You have to assign reference flow types for these relationship keys.
    This should help.
    Regards, Franz

  • [SOLVED] database file for multilib does not exist

    Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
    Last edited by bdawg (2012-09-18 22:57:17)

    bdawg wrote:
    Ok so the whole output is as follows:
    Warning: database file for 'multilib' does not exist
    Error: failed to prepare transaction (could not find database)
    And my Pacman.conf is blank
    pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
    Are you running a 64-bit system?
    Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
    Last edited by karol (2012-09-18 22:13:59)

  • Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

  • What Download Video Program for Mac is as Good as Orbit is for Windows??

    12/29/2008. Friends, I have searched and searched and searched for a video download program for Mac that will download videos from almost any website besides just YouTube and such, but to no avail. The latest OrbitDownloader 2.8.1 for Windows is excellent and will do this for Windows on a PC. What similar download video program for Mac will perform as excellently or almost as good?? I've tried Firefox's Video Downloader Helper but can not get it to work. I've tried Mori but don't know how to get it to work. I've tried Perian but again don't know how to get it to work, I just get a window that says "Uninstall." I will really appreciate finding such a program for Mac, for my iBook G4 which has Leopard OS X 10.5.4 and WiFi. Many thanks. Chuck Y., Chicago

    1/2/2009. Thank you all for your help. I love this wonderful feature I find about Apple Discussion Forums, so many friends. I did not know about Perian's instructions until you informed me. [www.perian.org/#watch] I'm glad that I gave the example of "POV Inheritance," because it is somewhat complex. First a person must locate the POV Inheritance website. For Perian, to go into Windows Activity at that point shows only that line. No one told me that I must click the wee arrow to the left of that line. Then a long drop list appears. But none of those help. So one must return to and on the website click "Watch the streaming video online" or ". . . now." That brings up another sub-website on which a person must click "Watch the Full Film." Then one can choose between five "chapters," and go into Windows Activity again. Then appears "net + public affairs player: video." Then one clicks the small arrow on the left of "net+ public affairs video" and sees 17 selections. All except one are small kbs. One has a large megabyte file. Select and Command + C that, and then go into Windows Downloads and Command + V [paste]. Then the download begins. And the person must do that for each of the five chapters. The other option is not to click any of the "chapters" but instead click "Watch the Full Film," and then click Windows Activity and then the small arrow left of "net + public affairs : video" and on the drop down list appear, among many, the five separate chapter files [the ones with large megabyte files], and continue as per a few lines above. The Perian procedure is simple. Getting to the line to be downloaded, in this case, is more complex, and so a good example from which to learn.
    RealPlayer 11.0.0 [or 11.0.1] and its RealPlayer Downloader work very well too and may be simpler.
    Thank you all and Happy New Year cruising with your Apple Macs. C. Yopst, Chicago

  • ATI 5770 1GB Video Card For Mac Pro dvi hdmi cable

    I am sending video signal over a 50FT HDMI To DVI from my Mac Pro (3,1) via ATI 5770 1GB Video Card For Mac Pro (5.0 GT/s) (181062917108) and I cannot get a constant signal to my TV. The signal stays on for a few seconds or several hours or my TV (Samsung) says there is no signal or I get just a gray static screen.
    I never had a problem before with my previous video card the 512MB nVidia GeForce 8800GT with a 25ft long cable. Any ideas people?

    A cable of about 5 meters (16 ft) can be manufactured to Category 1 specifications easily and inexpensively by using 28 AWG (0.081 mm²) conductors.[114] With better quality construction and materials, including 24 AWG (0.205 mm²) conductors, an HDMI cable can reach lengths of up to 15 meters (49 ft).[114]
    from: http://en.wikipedia.org/wiki/HDMI
    You may need a higher-quality cable or a lower resolution for your display to make this work without an HDMI Repeater.

  • Endpoint Protection error: The source folder for content does not exist.

    I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
    I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
    I just recently started seeing that my Endpoint Deployment Package has Failed.  I click on "Content Status" and select the Endpoint package (which again shows Failed).  I click on "View Status" and I get this
    message in the "Error" tab:
    The source folder for content does not exist.
    The Asset Details point to the exact location  that does not exist:
    The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist. 
    I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
    shared and is populated with a lot of other folders. 
    Is this possibly just a bad update file?  Should I manually create that sub-folder that it says is missing?
    Any help would be great!  Thanks!

    Thanks for the quick reply, Torsten.  (I often forget which logs to check for certain things).
    There are six lines (3 errors -- in italics below) in the log around the same time frame.  They read:
    The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM  
     5920 (0x1720)
    STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    Failed to take snapshot of one or more contents in package PDC00063    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063"    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:46 AM    5920 (0x1720)
    Failed to process package PDC00063 after 33 retries, will retry 67 more times    SMS_DISTRIBUTION_MANAGER    5/27/2014 11:54:47 AM    5920 (0x1720)

Maybe you are looking for