Livelink ECM u2013 eDOCS (Hummingbird)

Dear Expert,
I would like to find out if anyone has encountered an implementation with both SBO and an archiving system called 'Livelink ECM u2013 eDOCS', also known as Hummingbird?
I ask because we seem to have a problem with the coexistance of the two systems. SBO 2007A uses\reserves a certain COM for XL Reporter in Microsoft Excel 2007. When SBO is removed, eDOCS works fine. In earlier versions of Microsoft Excel, for example 2003, this is not a problem. I assume it wasn't handled like a COM Add-in.
Do you have any suggestions, possibly to configure XL Reporter on another COM?
Seeing that XL Reporter is no longer running as an add-on in 2007, is it possible to disable it for the time being?
Best regards,
Adriaan

Gordon,
I'm thinking of installing SBO on a workstation with no MS Office, in order for it not to automatically install the COM. Then to install eDocs and MS Office. Once that is all working, I will then manually add the XL Reporter COM.
Your opinion is always appreciated.
Adriaan

Similar Messages

  • Livelink

    hi all,
    can anyone give me some material on integrating LiveLink from java , its very urgent thanks in Advance.

    Hi Venkat,
          Check these info, it will help you:
    <a href="http://www.cimmetry.com/cimweb.nsf/pages/NewsOTLivelink">Integration Enhances Open Text's Collaborative KM and ERP Solutions</a>
    <a href="http://www.opentext.com/2/sol-products/sol-pro-enterprise-portals/pro-ll-portal-integration-kit.htm">Livelink ECM</a>
    Also check this similar thread:
    /thread/58673 [original link is broken]
    Regards,
    Subhasha Ranjan

  • ECM -Per Plant

    ECM u2013 how do you switch it on per Plant ?
    What ways can I configure just to restrict to one plant ?

    Dear Milton,
    In my understanding it is not possible to restrict the ECM usage at plant level using the configuration settings.
    Change numbers can be used in the master data creation/change and certain settings are at configuration level and also along
    with some settings in the authorization objects.
    Say for Eg,check this link to understand more,
    Re: Bom Change Enter change number - to make error message
    Regards
    Mangalraj.S

  • How to display icon in alv report output

    hi,
    my ewquirement in in alv report in one column to diaplay the icon(tickmark) based on some codition.
    how to achieve it??
    condition is
    Affected (Locked on Current ECM) u2013 can use symbols    for affected and   for changing u2013
    u2022     Lock AEOI u2013 CCLCK for AE01-OBJKT (Material) lock.
    Condition:
      If AEOI u2013 CCLCK is activated then display symbols  (tickmark)  in line of their AE01-OBJKT (Material). else display
    (x mark)

    Hi,
    In field catalog of grid set
    Ex--
    when 'Field'.
      lwa_fcat-icon      = c_true.
    based on your condition
    set the desired icon in table.
    Ex.... lwa_table-field = icon_tick.

  • Password for Add on- OTEXBAS 0961_700

    Hi All,
    I am installing an Add on- OTEXBAS 0961_700.
    While installing it is asking for password for which i reffered to note 1040369 - SAP Archiving / Document Access by Open Text
    Installation .
    But i am not able to find the password using this note.
    This is what is mentioned in the note:
    This password information together with the installation documentation can be
    found in the "Installation and Upgrade Guide" of Livelink® ECM-suite for SAP®
    Solutions.  The installation guide is located on the installation CD in the
    folder Documentation\manual\english\er-igd.
    But, in service marketplace I am unable to find this installation guide.
    Kindly guide us to get the installation guide or password.
    Thanks.

    Hi
    Have you check the password as mention in the same SAP Note 1040369 either the installation guidie or the index.html url?
    Installation
    Each installation package of  Livelink® ECM-Suite for SAP® Solutions is protected by a specific password.
    This password information together with the installation documentation can be found in the "Installation and Upgrade Guide" of Livelink® ECM-suite for SAP® Solutions.  The installation guide is located on the installation CD in the folder Documentation\manual\english\er-igd.
    You may also access this guide from within the file index.htm on the installation CD or by opening the file \Documentation\guide\er-igd-ovw.htm in your web browser.
    BR
    SS

  • DMS Architecture design

    we are migrating from an another DMS company to Opentext..  we hv bought the license thru SAP so there are some constraints on the open text support..
    based on the previous project experince, we have installed the following
    1) open text runtime core services and MSSQL - seperate windows env
    2) SAP add-on (opentext SAP solutions) at the sap ECC side
    I think the missing piece is intalling the Archiving services server..when I was analyzing , i have realized there are lot of ways to do.. but need your suggestion, please
    1) Installing the Enterprise library services (or part of services such Archiving and Storage services etc)  or
    2) installting the Livelink ECM-Enterprise server(complete package).. and removal of runtime core services
    not sure how to proceeed on this.. any suggestion would be appreciated on this, please
    thanks
    Gopal

    Hi,
    Since you have bought license for OpenText, you can refer all the installation material on OpenTexT Knowledgecenter.
    Please select relevant installation guide. Download appropriate software from OpenText site based on your requirement.
    1) Installing the Enterprise library services (or part of services such Archiving and Storage services etc) or
       For data archiving setup, you need to select above option. Here include option for runtime core services as well.
    2) installting the Livelink ECM-Enterprise server(complete package).. and removal of runtime core services
       Above option is not recommended for data archiving setup.
    Hope this helps.
    Regards,
    Deepak Kori

  • Opentext ECM Livelink - Archive Server 9.7 - Is AIX a valid platform

    Hi All,
    Can anyone tell us, whether Opentext ECM Livelink - Archive Server 9.7 is supported on AIX - Oracle platform or not? If yes, then which version and patch level etc for OS and DB?
    We do not have access to Opentext Knowledge base and so we could not get the information from there. However, from SAP service marketplace we found the Release Notes for Archive Server 9.6 and that seems to support AIX. But we found the Release Notes for Archive server 9.7 from a friend and there, AIX is not mentioned specifically as a supported OS. We are confused as whether for Opentext ECM Livelink - Archive Server 9.7, AIX is supported or not. Any help/resources will be greatly appreciated. Also any note on hardware sizing would be very much helpful.
    Regards,
    Priya

    Hi All,
    Thanks for your responses. We got in touch with ECM initially and the Customer Service Executive informed us that if only we have procured the product they would share the requested information. However, I was lucky 2nd time, I wrote to them and they did respond with all the useful information. Currently Archive Server 9.7 is not OFFICIALLY supported by AIX (ECM has not tested), though they mentioned that all Unix platforms support Archive Server 9.7.
    Thanks,
    Priya

  • OCM u2013 ECM

    Dear guru
    I want to use ocm for a production order according to a change of a bill of material with a change number.
    The change number must have a release key relevant for OCM or can I run COCM using a change number without release key  ?
    Thanks in advance.

    Please note that release key is required for OCM...see the description
    Change of master data
    The change number, with which you executed the changes to the master data (for example, bill of material, order BOM, routing), has to be released with a release key that is intended for order change management (Release: Rel.OCM, Shift the date: Date OCM). You maintain the release key in Customizing by choosing General Logistics ® Order Change Management ® Release Key ® Define Release Key. The object category to be changed (routing or BOM) must be active in the change number or change package (default from ECH change profile).

  • Quantity effectivity parameter for ECM (LO-ECH)

    Hello,
    Our company uses Engineering Change Master records with no parameter effectivity (just by the date) to control BOM changes effectivity. Recently we received internal request to add ability to control ECM effectivity by quantity of assemblies produced.
    The business case can be described with an example:
    BOM:
    Line item: 0010  component: material1    valid from: 01/01/2009  valid to: 12/31/9999
    Line item: 0010  component: material2    valid from: 08/01/2009  quantity: 300 pcs
    Explanation:
    The line item 0010 of the BOM has u201Cmaterial1u201D assigned valid from the 1st January. A request comes from the customer to produce 300 pieces of the assembly with material2 instead of material1. Start of the production was scheduled to the 1st of August. Once 300 pieces are built material1 is set back to line item 0010 of the BOM.
    We are aware that production orders covers this scenario well but the request came from a business unit that runs repetitive production (no production orders).
    Our research of SAP provided effectivity parameters showed that none fulfills this requirement. We are looking for your advise how this requirement can be accomplished u2013 either with new ECM effectivity parameter or any other mean.
    Regards,
    Jacek

    Hello Sai,
    Try if you can use 'ECM Information System' : Tcode- CC07.
    Hope it will help.
    Regards,
    Anup

  • GroupWise6.5 Integration with FileNet and Hummingbird

    Hi,
    I would like to know if anyone have done GroupWise 6.5 Integration with FileNet or Hummingbird.
    FileNet and Hummingbird provides Enterprise Content Management (ECM) solutions.
    Thanks
    Ranjan

    Thanks Roger for your information.
    Ranjan
    >>> Roger Thomas, Dev SysOp 22<[email protected]> 7/18/2005 10:01:03 PM >>>
    Novell only integration API is the old open document management (odma)
    standard. To support applications such as Excel they also provide add-in
    macros to handle file access. Anything else must be coded by a third party.
    Also this has not changed in the future 7.0 release.
    Roger Thomas, DevNet SysOp 22
    "Ranjan Kumar Dalai" <[email protected]> wrote in message news:o_MCe.699$[email protected]..
    > Hi,
    >
    > I would like to know if anyone have done GroupWise 6.5 Integration with FileNet or Hummingbird.
    >
    > FileNet and Hummingbird provides Enterprise Content Management (ECM) solutions.
    >
    > Thanks
    > Ranjan

  • ECM Employee Does Not Meet the Requirements Error

    We're receiving an error on the ECM compensation planning iView for certain eligible employees.  It says, 'employee does not meet the requirements to proceed with this action' error.  Have you seen this error before?  If yes, then what fixed it?  These employees are eligible on IT758 records.

    I can think of this:
    Scenario 1
    Configuration setting in V_T71ADM08: Anytime review is checked for your review.
    System response: Dates in V_T71ADM10 are not checked and you are able to process the review.
    Scenario 2
    Configuration setting in V_T71ADM08:
    Anytime review is not checked for your review.
    Selection period 01/01/2010 - 04/15/2010
    Review period 12/31/2009 - 12/31/2009
    Configuration setting in V_T71ADM10:
    Effective Date 3/31/2010 (fixed)
    System response: Error as the effective date is March 31st 2010. The review will only be effective for that day. Anytime review does not check this date as explained in the 1st scenario. I think you need to remove the fixed effective date and use the effective date begin and end date as 01/01/2010 u2013 04/15/2010. You would then also uncheck the anytime review setting in V_T71ADM08. I think the review period in the same table should also match the effective dates.
    Hope this helps.
    Donnie

  • Dump in SAP after installing patch for Doculink of Opentext ECM

    Hi,
    We have installed Add-on of Doculink for Opentext ECM on ECC6.0 System. We have installed (new version 9.6.2) it from Open-Text (3rd party vendor).
    01) Open Text DocuLink for Livelink Enterprises
    02)  DocuLink for Livelink Enterprise Server
    03) Open Text Archiving and Document Access
    04) Open Text Archiving and Document Access for SAP Basis
    After transporting the patch DC3.1-001(instruction of patch) which we found from open text site of https://esc.ixos.com/ we are getting dumps in SAP that: Program is not Unicode-compatible.
    Error analysis
    The following syntax error was found in the program /IXOS/SAPLDC_C:
    The program /IXOS/SAPLDC_C is not Unicode-compatible, according to its program attributes.
    Can any one tell me how can this transport be reverted back from Open-Text 9.6.2 ?
    Thanks & Regards,
    Nikhilesh Ray

    is not Unicode-compatible
    Have you tried to disable the unicode check?, It might work.... In anycase I think you should give IXOS a call, I presume they have seen this issue quite a few times :-D
    Regards
    Juan

  • SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

    We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
    When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
    Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
    Cheers,
    Tim

    Hello Tim and Wolfgang,
    I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
    However I did notice some indications which might be a help (based on 7.00!):
    Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
    The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
    @ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
    If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
    Sorry that I can only help by speculating, because I could not reproduce what you have described.
    Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
    Cheers,
    Julius
    Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

  • SSO Between SAP EP 7.0u2013 BOXIR2 SP1 u2013 BW3.5 Is SNC required?

    We are trying to enable SSO between SAP EP, BO and BI so that users will be able to access Crystal reports (which have got backend as BW) from Enterprise Portal which are scheduled in BO enterprise server
    Below are the details on our landscape.
    1) SAP EP 7.0 Integrated with AD and SP Nego configured(if it fails users will use AD user id and pwd)
    2) BO u2013 AD authentication is available as well as SAP Authentication got enabled using SAP BO Integration Kit. In BO reports are there which got backend as BW and scheduled successfully.
    3) BW 3.5 is using SAP authentication(Not AD authentication)
    4) SSO has been established between SAP EP and BW (user ids will be same in AD and BW)
    5) BO has two servers bo1.yy.comp.com and bo2.yy.comp.com
    6) SAP EP and BW has domain names as EP.xx.yy.comp.com and BW.xx.yy.comp.com u2013 additional u201Cxxu201D is there in the domain trail. So we have created a dns entry bo.xx.yy.comp.com which will resolve to bo2.yy.comp.com (CMS is running in this server) so that we meet the prerequisite for SSO with EP u2013 BO - BW.
    7) BW is not configured with SNC.
    Question 1- As per point 3 u2013 SAP Authentication is available in BO u2013
    So in that BO server can we use ASPX page to read MYSAPSSO2 cookie generated by SAP EP and use that cookie to access report which got BW as backend?
    Question 2
    Do we need any more configuration for the SSO from EP - BO u2013 BW? (do we need to go for SNC?)
    Even after reading many threads I couldn't understand the flow of SSO. Any advice will really help us overcome the hurdles.
    Thanks in Advance
    JayCeeDee

    Question 1- As per point 3 u2013 SAP Authentication is available in BO u2013
    So in that BO server can we use ASPX page to read MYSAPSSO2 cookie generated by SAP EP and use that cookie to access report which got BW as backend?
    >>> Assuming you are getting SSO tickets from the portal that happens automatically when the SAP authentication is configured.
    Question 2
    Do we need any more configuration for the SSO from EP - BO u2013 BW? (do we need to go for SNC?)
    >> You mention on the one hand SSO tickets, on the other hand Windows AD. Which one is it ? What is the authentication that the user will leverage to connect to the BusinessObjects Server ?
    Ingo

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

Maybe you are looking for