LM46: Error Target handling unit NNN is not assigned to TO MMM.

In LM46, if we select the material with F1, it works.
If we initialize o_ltap_kzqui = 'X' in the User Exit EXIT_SAPLLMOB_480 we get the error.
Is there an issue about that?

It seems we can't simulate an automatic F1 for the article selection... too bad!

Similar Messages

Error in Handling Units

Hi ALL,
1. We have to pack the matrials to handling units in the delivery
2. We have to pick it.
We tried through IDOC, FM also. But it is giving an error *'There is already a handling unit 1000000151 posted for GR without stock.
Here 1000000151 is a handling unit number.
When we tried fore gound it is working properly. But through Idocs ansd FMs it is throwing above message.
Idoc - DELVRY03 : message type SHPCON
FM - SD_DELIVERY_UPDATE_PACKING_1, WS_DELIVERY_UPDATE
Please advice us how to proceed.
Thanks & Regards
Avanish

Hi,
System will trhow this error in below cases:
1. the Sloc is HU mangaed and HU's are not packed for inbound delivery.
2. HU's packed and T.O created.
So check whether you are packed the items in inbound or T.O already created.
Hope this helps you.
Rgds,
Kris.

Changing Handling unit weight does not update delivery header weight

Dears,
when we pack an item on a palett, system calculates tara-weight + material weight = gross weight and inserts this value to the likp-btgew. this is correct.
now it happens, that shipping departement uses a scale to get the 'real' weight of the handling unit. if the weigth differs, they change the loading weight of the HU. system calculates correct the new gross weight of the HU.
But when going back to delivery view, the likp-btgew is not updated. Do we miss a setting?
thanks a lot for your help!
Michael

wrong forum

BDC error BM302 : Internal unit &, language & is not maintained

Hi Experts,
I have Unit of measurements defined as below in T006A Tables ( Configured through CUNI tcode)
SPRAS MSEHI MSEH3 MSEH6 MSEHT      MSEHL
EN        UNT     UNT      UNT       UNIT         Unit
HU        UNT     DRB      DRB      Darab      Darab
Through BDC Prpgram i have created an inforecord ( using ME11 transaction ), where Logon Language = HU. It is created successfully. When i try to open the created info record using ME12, the unit ( EINA-LMEIN) is displayed as '**' and it throws message "Internal unit DRB, language HU is not maintained ". When i Checked in database EINA-LMEIN is saved as '**'.
But when i create the Info record manually in ME11, No issues .The database EINA-LMEIN is correctly saved as 'UNT'.
I couldn't figure out the issue , whether problem is in my BDC program or Language dependent configuration of the unit in CUNI. Please help in solving this issue , Am i missing something ?
Thanks in advance.
Regards,
Murali

Hi Murali,
You might be missing some more configuration (T table entries). To determine what that is -
Process the info-record using ME12
Start debugging "/h"
Once debugging starts - place Breakpoint At MESSAGE statement
F8
Program control will stop at every message triggered and one of them would be you message. Check the code around the message (and call stack if required) and you might see the reason for the error
Cheers,
Aditya

DELVRY03 (Change Delivery) - Error with Handling unit

Hi
I'm using idoc DELVRY03 (Inbound) to change the SAP delivery details. But, when i test it i'm landing with error "Field EXIDV empty", "Field VHILM_KU empty" : Status 51.
But I think i dont want to use those. Any inputs on how to supress it and have a green light?

Check whether these fields are mandatory in Delivery type configuration
Regards
Vinod

Consignment Deliveries: Handling Unit Changes to Non Assigned HU

Hell Experts,
We are having an issue with the consigment deliveries. After doing the PGI, the handlling unit assignment changes to Non Assigned Handlling Unit.
Situation Before PGI:
VEKP-VBOBJ = 01
VEKP-VBOBLKEY = <Delivery Number>
After PGI: (Movement Type Used is 631)
VEKP-VBOBJ = 12 (Non Assigned handlling Unit)
VEKP-VBOBJKEY = <Delivery Number>
The handlling unit is assigned to the delivery but the field VBOBJ changes to 12. We could see the handlling unit in the delivery but the assignement is not 01. Logically, the field VBOBJ should be 01. (Because we are able to see these HU in delivery).
If I reverse the PGI, then VBOBJ again changes to 01. Also, if I pack all the material into one HU and leave another HU empty then after PGI, VBOBJ for empty HU is 01 but for packed HU it is 12 (with VBOBJKEY = Delivery Number)
I don't know why the assignment is 12? Are we missing anything?
Thanks,

are u already solved this issue ? can u please tell me how to solve it ? and I why the assignment turns into 12 ?
thanks
regards
Henny

Handling Unit Error

Hi All,
The scenario is STO from Plant(2003) to Plant(2002) within company and sales from Plant 2002 to customer.
VA01(Plant2002-no stock)->ME21N->VL10B(with HU-from Plant 2003)->VF01(JEX)->MIGO(GR w.r.t delivery,selecting via.HU)> VL02N-from Plant 2002(with same HU of Plant 2003)-> VF01.
When i am doing the outbound delivery from Plant 2002(with same HU of Plant 2003), iam getting the following error.
Handling unit 1000000023 has status 0040 - No Assignment to outbound delivery
Message no. HUDIALOG141
Diagnosis
While processing an outbound delivery, you can only assign handling untis that are currently in stock. This includes handling units with status '0020' = (stock not at HU STORAGE LOCATION) and '0030' (stock at HU STORAGE LOCATION).
Handling unit 1000000023 that you selected has a current status of 0040,
System response
Handling unit 1000000023 cannot be assigned to this outbound delivery.
Procedure
If the handling unit has status '0001' (planned) or '0010'-'0011' (realized), check whether you have to post goods receipt for the handling unit. If the stock is already in the warehouse, you can change the status manually by choosing 'Process handling unit'.
Kindly help me.
with regards

Hi Azeez,
I hope you are trying to pack the material in already used HU.
In your scenario, initially plant 2003 used a HU to deliver the goods to plant 2002. now after doing GR in 2002, you are PGI ing from 2002. You can only use existing HU's that are available for packing in plant 2002. If you try to use HU of plant 2003, if it is not defined in plant 2002 system won't allow to use it.
Thanks
Chandramouli

Unit KG is not Created in language EN-- Error in MMBE

Dear Guru,
When i am running MMBE to verify the stock, system showing the stock as per parameters givien for Unit of Messasurement ( ex. EA.)
After Executing the report, at header level when i am chaing Unit of Messasurement ( Ex. to KG) system giving Error message
<b>Unit KG is not Created in language EN</b>
But when i am running mmbe by giving Unit of Messasurement KG and excuting ..its shows the report.
Y i am getting error message after excuting report and changing the UoM.
Plz guide me.
Regards,
Venkat

Hi,
As with most SAP messages it is always a good idea to trust what it is saying.
The system is telling you that KG has not been created in the English language.
Go to transaction CUNI to check the settings.
Select the Unit of measure for "MASS" (from the drop down list) and check the entries for UOMs.
KG should be there and should have an English description (the message said it was not there for EN)
If it is there and set up correctly then there might have been something else in the UOM field? You didn't enter " KG" did you (a blank character then KG?)
Steve B

Unit of measure not defined for language ZH

Hi,
We were creating a PO when we encountered the error which states "Unit of measure not defined for language ZH".
We executed CUNI to translate the units of measurement to our target language. System prompted "This object was segmented. Only new lines evaluated." What does this mean?
We tried creating the PO again, however we encountered the same error that the unit of measure was not defined for the language.
Please recommend action/s that we should take. Thank you.

Take a look at the below threads. Your problem has the solution.
Re: Unit of measure XX not defined for language DE
Re: Unit of Measure Error in Purchase order

Re-using Handling unit. Inbound deliver has unpacked materials

Dear All
We're running the process that inbound delivery is created automatically once goods issue for outbound delivery is done.
We're also running the process when handling units created in outbound delivery are re-used in Inbound delivery.
The problem we've got is that from time to time we have situation when part of materials in inbound Delivery are unpacked, while these materials were packed in handling units. There are no errors appear, and Inbound Delivery is created, but materials are unpacked.
In humo for such handling units, which are not created in Inbound Delivery i can see that the status was not updated and still remains "LOAD PHEX WHSE" and such HUs are assigned to plant where goods issue was done.
Whille for handling units which were created in Inbound Delivery the status is updated to "PHEX" and HUs are assigned to recieving plant.
Please advise if you have any idea on the root cause and solution.
Thanks in advance.
Best Regards
Andrey

HI Andrey,
Wanted to know if you have recd the solution for this old thread. We arefacing a similar kind of problem wherein we get the status as 0020 when we pack for Returns Delivery. This status is like the Goods are already posted and hence we cant do PGR.
Please suggest.
rgds..Ameet

Handling unit without inventory management

Hi Experts,
In our scenario, we have Goods reciept from production into Storage location 1000 which is IM managed, Later the stocks are transfer posted into storgae location 1100 which is HU/WM managed. Now in 1100 i have found HU's which have been created with status 'Handling unit without Inventory management'.
Can someone explain to me what does it mean when a HU gets created with this status? under which scenario does the system create the HU with this status?
Also when this HU is scanned for putaway the system gives error message Handling unit does not exist in SAP. Can someone let me know the resolution or the root cause for this issue.
Thanks in advance.
Harish

Hi,
The above mentioned status is when a Handling Unit created, but the Inventory management is not yet posted for the content materials of the HU
I can give an example: Created a Inbound Delivery for material XXX. Then a HU is created in Packing screen, but the PGR is not yet done. At this stage, HU has the same status
Hope this helps
If the GR/GI is reported for HU contents, then the HU status will change. With you case, a Handling Unit is just created, but no further tansaction like, packing, GI or GR is done.
Regards,

Handling unit output determination questions

I have configured a new output type for a custom label we need to implement for handling units.   It is assigned as V6, for Ship-to Party/Shipping Material.
In VL01N or VL02N, I am able to create the handling units and pack the delivery line item materials into them.
I am able to manually assign the output type to the handling unit in VL01N/VL02N, but have not been successful in getting the output type to auto populate. I have verified that it is not populated after packing the HU and saving from VL01N, or when doing from VL02N, or after PGI.
I have been searching the forums and have not found the answers I need.
1. Is it possible for the output type to automatically populate for a handling unit? If so, at what point should this happen? I would think based on how our custom label output types for delivery documents behave, it would assign after save from either VL01N or VL02N.
2. When I create the HU, I specify a VERP packaging material number that represents the carton in order to create the HU. I do not have the material on the sales order or delivery as a line-item, and I am not getting any error messages indicating that it should be.
If this should work the way we expect it to, any suggestions on what I have overlooked that would prevent my output type from automatically assigning?
Thanks in advance for your help.
Dave

Hi Joan,
Thank you for your answers. They were most helpful. I was finally able to get the new Output Type to assign after I created the HU's and saved the delivery.
Hopefully you won't mind if I ask some related questions.
1. If I went to VL02N for a delivery where I had already created the handling unit, it did not automatically get the Output Type assigned when I saved. (Like it does for our delivery based labels when I add a user in NACE that previously wasn't identified to get the label.)   Is this the normal behavior for HU-based output or am I still missing something in my setup?
2. I did the VHAR step and specified both the Output Determination Procedure and the Output Type of my new label,as suggested.   This did work once I finally tested by creating a new HU for a delivery, rather than checking an existing delivery/HU. Is entering the Output Type here critical? If another customer has a different label format, I think assigning the Output Type here this will cause a problem for us. (I haven't had a chance to change the config to remove this and see if the Output assigns based on references elsewhere, now that I know it seems to assign only when the HU is initially created.)
Thanks again!
Dave

STO-Handling units have been changed. No cancellation possible

Hi All,
I am getting the following error while doing the cancellation of outbound delivery in VL09.
Handling units have been changed. No cancellation possible
Message no. HUDIALOG304
The Business Process:-STO(mov type 641) from Plant 1000 to Plant 2000
ME21N->VL10B->HU02->VL02N(Assigning HU and PGI)->VF01(Proforma)->J1IIN(Excise)->MIGO(w.r.t Outbound Delivery)
-> VL32N(PGR-Post goods receipt).
Now i want to reverse the outbound delivery..
For this I cancled the PGR in VL09(for Inbound delivery) and removed the assignment of HU then deleted the Inbound Delivery.
Then cancelled the outgoing excise invoice.
In VL09 for outbound delivery i am getting the error.
Handling units have been changed. No cancellation possible
Message no. HUDIALOG304
Kindly guide me
with regards
Azeez.Mohd

For this the solution is we need to do STO proces in reverse direction.
i.e from receiving plant to supplying plant.
So i am closing the issue.
With Regards
Azeez.Mohd

HU03 going to short dump for handling unit which has higher level handling

Hi,
I am ABAPer, i working on issue, HU03 is gong to short dump. i dubug the t code and find out that particular handling unit has higher level handling unit. I checked another handling unit which won't had higher level handling unit, that time it's not giving dump.
Note: in HU03 T CODE, function module V51P_HU_CONTENS is fetching values. when ever handling unit has higher level handling unit, it's not fetching further values.
venkey

Hi,
Goto NACE transaction code , there you select the application area then it will give you the list of output types then select specific output click processing routines then you will see the program name and script used.
Or esle goto SPRO tcode then you can find the functional tab there also you can get the details.
Thanks,
Aditya

Handling Unit Number Range

Hi All,
How to give external number range to a handling uni.
The scenario is:
In HU02 screen I am giving packaging material number, material number and quantity.
Than when I press enter system automatically taking one number in the handling unit field.
But my client wants to give here an external number range not the internal number range.
How to give external number range for the handling unit?
Regards
Ashis

hai,
I am also not having access to SAP currently i am giving you the following information, check this out
Assigning New Numbers for Handling Units
Use
If, for example, you are going to deliver handling units worldwide, unique number assignment for identification of the handling units is necessary, and it is also a good idea to assign SSCC18 numbers ( see also EAN128).
Prerequisites
In the Customizing settings for the packaging material type, you must maintain the Handling unit type field.
In Customizing, choose Logistics General ® Handling Unit Management ® External Identification ® Define Number Assignment for Each Packaging Material Type.
Maintain the HU type for EAN128 field for the relevant packaging material type.
Procedure
In the packing dialog, select the Pack material tab.
Select the handling unit for which you want to assign an SSCC18.
Choose Extras ® SSCC number assignment.
Result
A new SSCC18 number is generated and automatically assigned to the handling unit.
regards
Sudhir

LM46: Error Target handling unit NNN is not assigned to TO MMM.

Similar Messages

Maybe you are looking for