LMS 3.0.1 with DEC 2007 update

Hi,
I have installed LMS 3.0.1 with Dec 2007 update,i have done custom installation and after that i installed 2007 update,after completing installation and update ,when i start LMS the process of LMS are not coming up for very very very long time and all process are down even DCR server is down,attachd are the logs,
Pls suggests Experts,
Thanks in Advance

It sounds like you may still have another process failure if processes take a long time to startup. Post the output of the pdshow command from the server.
As for logs, all of them are found under NMSROOT/log on Windows. Some of the logs are named after the processes to which they correspond (e.g. DCRServer.log). However, you shouldn't typically look through logs. Many of them will contain "normal" errors.

Similar Messages

Calendar duplicates with Outlook 2007 Update

I installed the "Outlook 2007 Update (Windows installer) for Palm OS" and it works fine except for one issue. If I Dismiss a Reminder for a calendar entry in Outlook, or if I Clear an Alert for a calendar entry on the Palm device, the calendar entry will be duplicated when I sync (Conflict Case: Duplicate). Before I installed this update the fact that you Dismissed a Reminder or Cleared a Alert would not flag calendar an entry as having been changed, so I would rarely have to clean up duplicates after syncing. Now I have to sync 2-3 times to deal with the duplicates, which besides being a pain can be a real problem when I'm running out the door trying to make it to an appointment.
I know that I could change the Conflict Resolution setting to Outlook Wins, Handheld Wins, or Ignore, but when I have made a more significant change (e.g. to the subject, start/end time, contents) to both the calendar entry in Outlook and the entry on the handheld I DO want to preserve them both so that I can merge the changes together.
Also, when I delete something on the handheld and Dismiss a Reminder for the same calendar entry in Outlook, the entry is recreated on the handheld. Then I have to find it and delete it again. This is getting real old.
I have searched for this issue on this site and via Google, and found no mention of it. I also went through the Hotsync Troubleshooting post, but that seems more oriented towards more serious issues like Hotsync not working at all, or not being able to find the synced data.
I have a Treo 700p, running Outlook 2007 under Windows XP Pro.
Thanks!
Post relates to: Treo 700p (Verizon)

I was unable to replicate this issue so my suggestion would be to make sure the Data is correct in Outlook and then change the conduits to Desktop overwrites handheld for one sync and see if the problem continues. Otherwise a hard reset and clean uninstall of the palm software would be where I went next.
Post relates to: None

Error when syncing iPhone with Outlook 2007 since updating iPhone to 1.1.2

Since updating to 1.1.2 I receive this message "OutlookSyncClient has stopped working". I am running Vista Business with Outlook 2007. Prior to updating to 1.1.2 I had no issues. I have tested this running iTunes 7.4.3.1 and 7.5.0.20. My contacts sync with no issues, only my calendar does not work. Has anyone else ran into this issue and have you found a resolution/work around?
Thanks,

Jeff33,
You may find some of the steps in this troubleshooting article will help you out:
http://docs.info.apple.com/article.html?artnum=305845
Hope this helps,
Jennifer B.

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

Hi,
From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
http://support2.microsoft.com/kb/2997209
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

My ipod touch calendar is not syncing with outlook 2007 after updating itunes

My ipod touch 4g, ios6.1 is not syncing with outlook 2007 since updating itunes last month.Also my calendar entries i added before one
month are missing in my ipod touch.Those entries are automatically deleted from my outlook and i found those entries in the deleted data
folder in my outlook. Even new entries i added in my ipod touch later are also not syncing with outlook.

See:
iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
or
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad

Back in Dec I updated Itunes, with the new version, my IPHONE now I can no longer sync to Itunes. I have an IPOD that works fine but the IPHONE does not. What can I do?

Back in Dec I updated to the new version of Itunes. Since then, I can no longer sync my IPHONE. I have an IPOD that works fine, but the phone is not found on Itunes. I am abled to download pictures to my computer, but I can not sync my music. What can I do?

Click here and install the software.
(71121)

Problems with software the update with Nokia 6233

Problems with software the update with Nokia 6233
Hello,
I have so far some-paints tries my software to update.
Each time the update procedure begins, sometime stands then on the telephone “test mode”.
On the computer wars I the reference in the update manager “connection to the telephone broken off” and wants the update to again start.
If I change my profile attitudes since that for example, then after a telephone restart again deleted.
What there can I make?
GreetingsMessage Edited by adisaily on 24-Aug-2007 09:03 AM

It sounds like your 5800 has the earpiece fault that was common with 5800's made before February.
You need to take it to a nokia care point for repair under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

I can no longer encode a sequence in PP CC after the Dec 2013 update

II have had to shut down and restart PP CC about 5 times when just creating a very simple sequence of clips from a family get together for Thanskgiving. I had to shut down since everything just quite responding. Fortunately, when I reopened the project, I could resume. I finally got my sequence created, but, now I can't export the sequence. The encode has failed 8 times in a row. I've tried direct export, and exporting to the AME queue. Sometimes I get the error sound and the absolutely useless error message "Error compiling movie. Unknown Error." Other times it just stops making any progress in the encode with no message at all, but there are zero CPU cycles being consumed by PP or AME. It just plain stops, wiht no eror message. That happened 3 times when used the Media Queue approach, and in the preview window in AME, it just stopped encoding at very different places in the sequence.
It appears as though I can no longer encode a movie. And I'm paying big bucks for this every month? What a sap.
I'm glad I'm not a Pro, whose income and life depends on these tools! But, I have a full time job, and only a very small amount of free time. I do not want to spend my small amount of free time as an Adobe Beta Tester. I've been using Adobe tools for years, which is why I signed up for CC, but...at this point: I can't even encode a simple sequence!
I can't express my disappointment. I wanted to be loading the encoded MP4 onto VIMEO for my friends and family to see by now, but.....I can't even encode a very simple sequence. And, I not a newbie. I have hundreds of videos on VIMEO, and many more on Youtube and Smugmug. Every one was produced with Adobe PP (from v4 on).
But now: I'm dead in the water.
I gurantee you that i will not 're-up' when my CC subscription expires, and, I guess right now, I have to start from scratch with my raw clips and find some other tools to use? I wish all my expensive plug-ins (like MB Suite) would work in whatever the tools I will move to...but...I guess I'll just have to write them off as a loss, just like the next 8 months of paying for my Adobe CC Software that no longer works.
I wish there was a way I could take the Thanksgiving Project and its sequences I've created in PP CC and convert the Project to PP 6.0, since I never had any issues with it PP v6.0.
But, from what I understand, if you make a project in PP CC, you are lost. You can't go backwards.
And, you know what? I'm done. I quit. I won't even try starting over in PP 6.0. I'm going to find some other tools. I know they won;t be as full-featured as Adobe's, but...I'm not a pro. I just need something that works reliably.
Disgusted beyond words.
John
Win 7 Pro
24 GB Ram
NVidia GTX 470
PS: So, does Adobe have any kind of disaster recovery plan when an update like this fails? Can you please send out a "new update" that rolls me back to the prior version on PP CC?

OK. I have successfully encoded this very simple sequence, but, I *can't* get it to encode using my "standard" custom H.264 preset that I have been using for years.
But, I was not able to encode in many plain vanilla codecs either, but, I got a notice that there was a CC update for AE, so I took the time to install those updates, and, as I always do, I re-booted after the update of AE.
But, of course I had re-booted a couple times last night when I couldn't get the sequence to encode. That's somethinf I always try b4 writing to a form.
So, here's the sequecne of events this morning:
1) Try to encode sequecne to uncompressed AVI (Cineform AVI 1920x1080). It SUCCEEDED. But, even though the AVI was large > 3.6 GB the quality was horrible, I did not pay much attention to the quality settings.
2) Try to encode to Quicktime H.264 codec. FAILED.
3) Try to encode to Quicktime Codec=Uncompressed 4:2:2. FAILED
4) CC UPdate notice for AE CC and AE 6.0
5) Perform update
6) Reboot
7) Try to encode to Quicktime Codec=Uncompressed 4:2:2. SUCCEEDED - but ENORMOUS FILE SIZE *very nice quality though* :-)
8) Try to encode to Quicktime Codec=H.264. SUCCEEDED.
9) Try to encode to my 'usual' H.264 Preset FAILED, just hung up during the 2nd of two passes. My preset is a VBR with 2 passes, see bitmap below. In this particular case it got 'hung' at this frame. But, It never 'hangs' in the same place?
So, I don't know why I was able to encode the sequence using the Quicktime Wrapper and botn Uncompressed and H2.264 Codecs after updating AE CC and rebooting, but not before. Surely there is no interaction between AE and AME?
But, the re-boot should not have caused it alone, since I had rebooted several times last night, and I've installed nothing but the new update for AE since last night?
So, I guess I'm OK now. Please excuse my tone last night, I was very frustrtated.
It is interesting that I still can't encode this particluar sequence using my "standard" H.264 preset.
And, BTW Jim: What I mentioned in my previus post was not that I had brought and old PP 6.0 sequecne into CC and encoded it successfully, but that I just re-encoded one of my most complex sequences AGAIN in PP 6.0, just to wanted to make sure nothing was haywire with "good old" PP 6.0.
But, I did just re-encode a sequence from PP CC from before the Dec 13 update using my "standard" H.264 preset, and...yes...it DID encode.
SOOOOO...Jim, you were correct. My inability to encode was not due to the DEC 13 PP CC update, but something very peculiar about this one sequence. But, it is a very simple sequence. The only effects applied is some light color grading using MB Colorista, and Warp Stabilizer to a stabilize a few hand held shots. No other effects. And...the encode that fails using my standard preset, never fails at the same frame.
But...at this point I'm OK. Instead of an encoded file in MP4 I have an ecnoded H.264 rendition in the QuickTime MOV wrapper. At least I've got that sequence done and can move on to the ton of others I need to get to (without having to learn an entirely new tool). :-)
John

What is max internal hard drive transfer rate compatible with a 2007 MacBook Pro?

In attempt to upgrade my mid-2007 MacBook Pro (Intel Core 2 Duo), I bought a Seagate 750GB listed as compatible with my computer on MacSales.com . . .
Seagate Momentus XT ST750LX003 750GB 7200 RPM 32MB Cache 2.5" SATA 6.0Gb/s Solid State Hybrid Drive -Bare Drive
Installation appeared to go well and I ran an extended hardware test with no issues found. However, the drive is listed at 5.46 TB (would be nice) and I get an input/output error when attempting to partition. I can initiate an erase, but after the time I would suspect it would take to erase the drive, I get an input/output error - it seems to appear after the first 750 GB of the '5.5 TB' was erased. At all times, the drive is not recognized when I attempt to install OS X from original discs.
I suspect the 6.0 GB/s transfer capacity of the hard drive is not compatible with the MacBook Pro. The drive came with 4 jumper pins but no jumper and no label diagram to set a slower transfer rate. I called Seagate, Newegg, OWC, and Apple, but no one has compatibility info for my MacBook Pro. To them, it appears I am running the first tests of this new technology with an 'older' MacBook Pro.
My MBP has had no issues - I'd like to keep her going with the optimum internal hard drive capacity, but don't necessarily want to set up a test bench in my house (though my kids would enjoy destroying it) and pay several shipping and restocking fees to test new hard drives.
The original drive had a 1.5 GB/s transfer rate. Does anyone know the maximum transfer rate compatible with a 2007 MacBook Pro? 3.0 GB/s? 1.5 GB/s? Thank you.

No spinning hard drive will transfer data faster then 60-80MB a second. The XT models have a flash storage area that is used when reading and writing data that can make it Appear faster in some situations. That flash memory if only 8 or 16GBs in side, I forget which one.
The drie is rated to work on 6GB SATA bus but it certainly can not transfer data that fast. It should be backword compatible to work on slower buses.
Your drive is 750GBs in size. Not wure where you are getting this 5.5TB (that is 5.5 Tera Bytes which is 5500 Giga Bytes. Your drive is under 1TB)
What are you using to partition the drive? Disk Utilities from the original install DVD?
You need to install on your old drive, Update it from the Apple Website then clone it to the new drive. The version of OSX you are using may not function correctly with that large of a drive. Or get yourself a copy of Snow Leopard, retail disk for $29 from Apple, and do all the partitioning and installing with that version od OSX.

Help syncing new iPad with Outlook 2007 on my PC and Blackberry Tour 9630

I have searched for answers and am stumped and frustrated...
I bought an iPad (am trying to become I-friendly) and thought it would be convenient to be able to sync my “stuff” (Contacts, Calendar and notes) to the iPad so we’ll have access to it while traveling. I use a Blackberry Tour 9630 and a PC with Outlook 2007. I have synced them effortlessly for years using Desktop manager. I make changes to my ‘stuff’ on both phone and PC and when I sync - the most current ‘stuff’ gets placed on both. Voila! Not anymore.
When I set up my iPad to work with iCloud things got screwy. A LOT of my contacts just disappeared - mainly the ones I use frequently. Now my Outlook 2007 calendar has three calendars on the screen:
Calendar in iCloud - pink
Calendar Merge Conflicts in iCloud - green in a tab behind the pink calendar
Calendar - blue
I use a cox email account and my blackberry gives me the choice when deleting an email whether to delete on the device or on the server. I use that feature a lot when we are traveling for a few weeks. It is nice to come home with no redundant emails on my PC.
1-How do I combine all the calendars so I have the same thing on each device, Hoping to stay updated on each when I make changes
2-Can the iPad email give me the option to delete from the server when viewing an email on a cox.net account?
I am not an expert but fairly tech savvy and usually can get these things done. I need help! I appreciate any thoughts or suggestions - Thanks in advance

Make sure all content is transferred and device is backed up before you update.
Transfer purchases
http://support.apple.com/kb/HT1848
How to backup
http://support.apple.com/kb/HT1766

Outlook 14.4.8 not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox"

Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.

Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support

IPhone will no longer sync with Outlook 2007

I've had my iPhone for about 16 months - the sync with Outlook 2007 worked great until about 3 months ago (I'm guessing previous update to the one that happened today.) No changes to the laptop I synch with - Vista.
In iTunes under the "Info" tab for Calendars I see the message "No supported calendar application can be found."
Normal sync for music works and photo uploading works fine.
Help!
Thanks!
p

Hi P,
Make sure you have the latest version of iTunes and Outlook. You can download the latest version of iTunes here: http://www.apple.com/itunes/download/
If the issue persists after updating, try the tips in this article: http://support.apple.com/kb/HT1692
-Jason

Migrate SBS Server 2008 with Exchange 2007 to Exchange 2013

I have looked at the documentation to co exist 2007 and 2013. However I am concerned as it talks about changing the dns name to something like legacy, as the dns name that is used for outlook to connect is the name of the server. So here
is my question. Would I have to change the name of the actual server itself? and if I choose not to, and use a new name for the 2013 server, such as mail, would the users that get migrated, would they automatically update the
name change? Also note the SBS server with exchange 2007 is also their file server at present but will be changing.

Hi ,
Thank you for posting your question in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support

Adobe Acrobat 8 Standard compatibility issues with Office 2007 and Windows 7

I just updated my platform to Windows 7 and upgraded from Microsoft Office 2003 to Microsoft Office 2007. The PDF printer did not download and realized that there are compatibility issues with Office 2007. How could I get this fixed?

Buy Acrobat 11.

Acrobat 7 Std compatible with PowerPoint 2007

I have Acrobat 7 Standard Edition; have used it for years with Office 2003. Recently I updated my PowerPoint 2003 to 2007, and now when I go to convert my 07 PowerPoint to a PDF I get the following message "Missing PDF Maker files" "Do you want to run the installer in repair mode?" I run it in repair mode and it just does the same thing over again. However when I convert any of the other Office 2003 doc to a PDF it's fine, so I am thinking it's a compatibility issue with version Acrobat 7 and PowerPoint 2007, can anyone confirm?

You will have to print to the Aodbe PDF printer. That is your only option, unless you either want to backup to an earlier version of OFFICE or upgrade Acrobat. The first version to work with OFFICE 2007 was AA8.1.2 (maybe 1). Bill

LMS 3.0.1 with DEC 2007 update

Similar Messages

Maybe you are looking for