LMS 4.2 Syslog Collector doesn't work
Hi fellas,
I need a few help for my LMS 4.2, syslog collector on LMS doesnt working even service syslog collector running normaly and also i saw in syslog_info is working to collect syslog from all router but not show up in dashboard monitoring.
I have setting on every router to logging (ip address LMS) but on LMS no any syslog from router can collect.
if you was face problem same with me or know how to solved this issue please share to me
i did a selftest from LMS there are all PASS except nslookup fail, it is has relation with syslog not show up on dashboard??
Hi ngoldwat,
thanks for concern my issue.
there are packet capture syslog_info that i get :
May 2 19:07:29 10.29.246.47 62893: 161406: May 2 12:01:57.134 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 2 19:08:23 10.29.246.47 62894: 161407: May 2 12:02:51.170 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 2 19:08:23 10.29.246.47 62895: 161408: May 2 12:02:51.174 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 3 16:42:28 10.29.246.47 62897: 161410: May 3 09:36:54.806 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 3 16:42:28 10.29.246.47 62896: 161409: May 3 09:36:54.774 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 3 16:42:28 10.29.246.47 62898: 161411: May 3 09:36:55.750 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 3 16:43:23 10.29.246.47 62899: 161412: May 3 09:37:49.846 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 3 16:43:23 10.29.246.47 62900: 161413: May 3 09:37:50.018 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 3 16:54:59 10.29.246.47 62902: 161415: May 3 09:49:27.031 UTC: %BGP-3-NOTIFICATION: sent to neighbor 10.29.252.85 4/0 (hold time expired) 0 bytes
May 3 16:54:59 10.29.246.47 62901: 161414: May 3 09:49:27.031 UTC: %BGP-5-ADJCHANGE: neighbor 10.29.252.85 Down BGP Notification sent
May 3 16:55:29 10.29.246.47 62904: 161417: May 3 09:49:55.731 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 3 16:55:29 10.29.246.47 62905: 161418: May 3 09:49:55.923 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 3 16:55:30 10.29.246.47 62906: 161419: May 3 09:49:56.803 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 3 16:57:12 10.29.246.47 62907: 161420: May 3 09:51:38.859 UTC: %BGP-5-ADJCHANGE: neighbor 10.29.252.85 Up
May 3 16:57:24 10.29.246.47 62908: 161421: May 3 09:51:50.875 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 3 16:57:24 10.29.246.47 62909: 161422: May 3 09:51:50.891 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 07:57:31 10.29.246.47 62910: 161423: May 6 00:51:53.214 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 07:57:31 10.29.246.47 62911: 161424: May 6 00:51:53.274 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 07:57:31 10.29.246.47 62912: 161425: May 6 00:51:54.122 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 07:58:26 10.29.246.47 62913: 161426: May 6 00:52:48.291 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 07:58:26 10.29.246.47 62914: 161427: May 6 00:52:48.319 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 08:04:32 10.29.246.47 62915: 161428: May 6 00:58:53.743 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 08:04:32 10.29.246.47 62916: 161429: May 6 00:58:53.867 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 08:04:33 10.29.246.47 62917: 161430: May 6 00:58:54.747 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 08:05:27 10.29.246.47 62919: 161432: May 6 00:59:49.043 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 08:05:27 10.29.246.47 62918: 161431: May 6 00:59:48.819 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 10:59:36 10.29.246.47 62921: 161434: May 6 03:53:56.510 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 10:59:36 10.29.246.47 62920: 161433: May 6 03:53:56.466 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 10:59:36 10.29.246.47 62922: 161435: May 6 03:53:57.422 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 11:00:30 10.29.246.47 62923: 161436: May 6 03:54:51.542 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 11:00:30 10.29.246.47 62924: 161437: May 6 03:54:51.562 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 19:10:31 10.29.246.47 62925: 161438: May 6 12:04:52.034 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 19:10:31 10.29.246.47 62926: 161439: May 6 12:04:52.142 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 19:10:32 10.29.246.47 62927: 161440: May 6 12:04:53.038 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 19:11:26 10.29.246.47 62928: 161441: May 6 12:05:47.110 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 19:11:26 10.29.246.47 62929: 161442: May 6 12:05:47.346 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 19:21:32 10.29.246.47 62930: 161443: May 6 12:15:52.870 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 19:21:32 10.29.246.47 62931: 161444: May 6 12:15:52.970 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 19:21:32 10.29.246.47 62932: 161445: May 6 12:15:53.818 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 19:22:27 10.29.246.47 62934: 161447: May 6 12:16:47.974 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 19:22:27 10.29.246.47 62933: 161446: May 6 12:16:47.946 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 19:27:32 10.29.246.47 62935: 161448: May 6 12:21:53.326 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 19:27:32 10.29.246.47 62936: 161449: May 6 12:21:53.518 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 19:27:33 10.29.246.47 62937: 161450: May 6 12:21:54.462 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 19:28:27 10.29.246.47 62938: 161451: May 6 12:22:48.402 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 19:28:27 10.29.246.47 62939: 161452: May 6 12:22:48.442 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 7 15:46:37 10.29.246.47 62940: 161453: May 7 08:40:56.647 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 7 15:46:37 10.29.246.47 62941: 161454: May 7 08:40:56.679 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 7 15:46:37 10.29.246.47 62942: 161455: May 7 08:40:57.575 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 7 15:47:32 10.29.246.47 62943: 161456: May 7 08:41:51.647 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 7 15:47:32 10.29.246.47 62944: 161457: May 7 08:41:51.659 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 7 19:13:37 10.29.246.47 62945: 161458: May 7 12:07:56.576 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 7 19:13:37 10.29.246.47 62946: 161459: May 7 12:07:56.776 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 7 19:13:38 10.29.246.47 62947: 161460: May 7 12:07:57.688 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 7 19:14:32 10.29.246.47 62948: 161461: May 7 12:08:51.652 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 7 19:14:32 10.29.246.47 62949: 161462: May 7 12:08:51.776 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 8 12:23:38 10.29.246.47 62950: 161463: May 8 05:17:56.001 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 8 12:23:38 10.29.246.47 62952: 161465: May 8 05:17:56.877 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 8 12:23:38 10.29.246.47 62951: 161464: May 8 05:17:56.029 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 8 12:24:33 10.29.246.47 62953: 161466: May 8 05:18:51.074 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 8 12:24:33 10.29.246.47 62954: 161467: May 8 05:18:51.126 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 11 00:39:10 10.29.246.47 62955: 161468: May 10 17:33:23.758 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.17)
May 11 00:50:32 10.29.246.32 144502: 6296699: May 10 17:44:45.413 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.17)
May 11 00:52:24 10.29.246.21 305: 000307: May 10 17:46:36.954 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.17)
May 11 19:28:22 10.29.246.47 62956: 161469: May 11 12:22:34.195 UTC: %SYS-5-CONFIG_I: Configured from console by srte@m on vty0 (10.132.17.186)
May 11 19:28:27 10.29.246.32 144503: 6305725: May 11 12:22:39.494 UTC: %SYS-5-CONFIG_I: Configured from console by srte@m on vty0 (10.132.17.186)
May 11 19:28:56 10.29.246.21 306: 000308: May 11 12:23:08.019 UTC: %SYS-5-CONFIG_I: Configured from console by srte@m on vty0 (10.132.17.186)
May 11 19:38:21 10.29.246.47 62957: 161470: May 11 12:32:32.744 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:38:25 10.29.246.32 144504: 6305806: May 11 12:32:37.346 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:38:26 10.29.246.21 307: 000309: May 11 12:32:37.666 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:51:41 10.29.246.47 62958: 161471: May 11 12:45:52.641 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:51:54 10.29.246.32 144505: 6305911: May 11 12:46:06.395 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 20:01:45 10.29.246.21 308: 000310: May 11 12:55:57.175 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 13 09:17:48 10.29.246.47 62959: 161472: May 13 02:11:56.894 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 13 09:17:48 10.29.246.47 62960: 161473: May 13 02:11:57.034 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 13 09:17:49 10.29.246.47 62961: 161474: May 13 02:11:57.962 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 13 09:18:43 10.29.246.47 62962: 161475: May 13 02:12:51.966 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 13 09:18:43 10.29.246.47 62963: 161476: May 13 02:12:52.046 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 13 10:23:48 10.29.246.47 62966: 161479: May 13 03:17:57.681 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 13 10:23:48 10.29.246.47 62964: 161477: May 13 03:17:56.689 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 13 10:23:48 10.29.246.47 62965: 161478: May 13 03:17:56.801 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 13 10:24:43 10.29.246.47 62967: 161480: May 13 03:18:51.689 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 13 10:24:43 10.29.246.47 62968: 161481: May 13 03:18:51.801 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 13 16:23:00 10.29.246.32 144506: 6327510: May 13 09:17:08.851 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 2 19:07:29 10.29.246.47 62893: 161406: May 2 12:01:57.134 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 2 19:08:23 10.29.246.47 62894: 161407: May 2 12:02:51.170 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 2 19:08:23 10.29.246.47 62895: 161408: May 2 12:02:51.174 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 3 16:42:28 10.29.246.47 62897: 161410: May 3 09:36:54.806 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 3 16:42:28 10.29.246.47 62896: 161409: May 3 09:36:54.774 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 3 16:42:28 10.29.246.47 62898: 161411: May 3 09:36:55.750 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 3 16:43:23 10.29.246.47 62899: 161412: May 3 09:37:49.846 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 3 16:43:23 10.29.246.47 62900: 161413: May 3 09:37:50.018 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 3 16:54:59 10.29.246.47 62902: 161415: May 3 09:49:27.031 UTC: %BGP-3-NOTIFICATION: sent to neighbor 10.29.252.85 4/0 (hold time expired) 0 bytes
May 3 16:54:59 10.29.246.47 62901: 161414: May 3 09:49:27.031 UTC: %BGP-5-ADJCHANGE: neighbor 10.29.252.85 Down BGP Notification sent
May 3 16:55:29 10.29.246.47 62904: 161417: May 3 09:49:55.731 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 3 16:55:29 10.29.246.47 62905: 161418: May 3 09:49:55.923 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 3 16:55:30 10.29.246.47 62906: 161419: May 3 09:49:56.803 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 3 16:57:12 10.29.246.47 62907: 161420: May 3 09:51:38.859 UTC: %BGP-5-ADJCHANGE: neighbor 10.29.252.85 Up
May 3 16:57:24 10.29.246.47 62908: 161421: May 3 09:51:50.875 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 3 16:57:24 10.29.246.47 62909: 161422: May 3 09:51:50.891 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 07:57:31 10.29.246.47 62910: 161423: May 6 00:51:53.214 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 07:57:31 10.29.246.47 62911: 161424: May 6 00:51:53.274 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 07:57:31 10.29.246.47 62912: 161425: May 6 00:51:54.122 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 07:58:26 10.29.246.47 62913: 161426: May 6 00:52:48.291 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 07:58:26 10.29.246.47 62914: 161427: May 6 00:52:48.319 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 08:04:32 10.29.246.47 62915: 161428: May 6 00:58:53.743 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 08:04:32 10.29.246.47 62916: 161429: May 6 00:58:53.867 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 08:04:33 10.29.246.47 62917: 161430: May 6 00:58:54.747 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 08:05:27 10.29.246.47 62919: 161432: May 6 00:59:49.043 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 08:05:27 10.29.246.47 62918: 161431: May 6 00:59:48.819 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 10:59:36 10.29.246.47 62921: 161434: May 6 03:53:56.510 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 10:59:36 10.29.246.47 62920: 161433: May 6 03:53:56.466 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 10:59:36 10.29.246.47 62922: 161435: May 6 03:53:57.422 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 11:00:30 10.29.246.47 62923: 161436: May 6 03:54:51.542 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 11:00:30 10.29.246.47 62924: 161437: May 6 03:54:51.562 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 19:10:31 10.29.246.47 62925: 161438: May 6 12:04:52.034 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 19:10:31 10.29.246.47 62926: 161439: May 6 12:04:52.142 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 19:10:32 10.29.246.47 62927: 161440: May 6 12:04:53.038 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 19:11:26 10.29.246.47 62928: 161441: May 6 12:05:47.110 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 19:11:26 10.29.246.47 62929: 161442: May 6 12:05:47.346 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 19:21:32 10.29.246.47 62930: 161443: May 6 12:15:52.870 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 19:21:32 10.29.246.47 62931: 161444: May 6 12:15:52.970 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 19:21:32 10.29.246.47 62932: 161445: May 6 12:15:53.818 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 19:22:27 10.29.246.47 62934: 161447: May 6 12:16:47.974 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 6 19:22:27 10.29.246.47 62933: 161446: May 6 12:16:47.946 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 19:27:32 10.29.246.47 62935: 161448: May 6 12:21:53.326 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 6 19:27:32 10.29.246.47 62936: 161449: May 6 12:21:53.518 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 6 19:27:33 10.29.246.47 62937: 161450: May 6 12:21:54.462 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 6 19:28:27 10.29.246.47 62938: 161451: May 6 12:22:48.402 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 6 19:28:27 10.29.246.47 62939: 161452: May 6 12:22:48.442 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 7 15:46:37 10.29.246.47 62940: 161453: May 7 08:40:56.647 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 7 15:46:37 10.29.246.47 62941: 161454: May 7 08:40:56.679 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 7 15:46:37 10.29.246.47 62942: 161455: May 7 08:40:57.575 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 7 15:47:32 10.29.246.47 62943: 161456: May 7 08:41:51.647 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 7 15:47:32 10.29.246.47 62944: 161457: May 7 08:41:51.659 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 7 19:13:37 10.29.246.47 62945: 161458: May 7 12:07:56.576 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 7 19:13:37 10.29.246.47 62946: 161459: May 7 12:07:56.776 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 7 19:13:38 10.29.246.47 62947: 161460: May 7 12:07:57.688 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 7 19:14:32 10.29.246.47 62948: 161461: May 7 12:08:51.652 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 7 19:14:32 10.29.246.47 62949: 161462: May 7 12:08:51.776 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 8 12:23:38 10.29.246.47 62950: 161463: May 8 05:17:56.001 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 8 12:23:38 10.29.246.47 62952: 161465: May 8 05:17:56.877 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 8 12:23:38 10.29.246.47 62951: 161464: May 8 05:17:56.029 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 8 12:24:33 10.29.246.47 62953: 161466: May 8 05:18:51.074 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 8 12:24:33 10.29.246.47 62954: 161467: May 8 05:18:51.126 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 11 00:39:10 10.29.246.47 62955: 161468: May 10 17:33:23.758 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.17)
May 11 00:50:32 10.29.246.32 144502: 6296699: May 10 17:44:45.413 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.17)
May 11 00:52:24 10.29.246.21 305: 000307: May 10 17:46:36.954 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.17)
May 11 19:28:22 10.29.246.47 62956: 161469: May 11 12:22:34.195 UTC: %SYS-5-CONFIG_I: Configured from console by srte@m on vty0 (10.132.17.186)
May 11 19:28:27 10.29.246.32 144503: 6305725: May 11 12:22:39.494 UTC: %SYS-5-CONFIG_I: Configured from console by srte@m on vty0 (10.132.17.186)
May 11 19:28:56 10.29.246.21 306: 000308: May 11 12:23:08.019 UTC: %SYS-5-CONFIG_I: Configured from console by srte@m on vty0 (10.132.17.186)
May 11 19:38:21 10.29.246.47 62957: 161470: May 11 12:32:32.744 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:38:25 10.29.246.32 144504: 6305806: May 11 12:32:37.346 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:38:26 10.29.246.21 307: 000309: May 11 12:32:37.666 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:51:41 10.29.246.47 62958: 161471: May 11 12:45:52.641 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 19:51:54 10.29.246.32 144505: 6305911: May 11 12:46:06.395 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 11 20:01:45 10.29.246.21 308: 000310: May 11 12:55:57.175 UTC: %SYS-5-CONFIG_I: Configured from console by 1445000 on vty0 (10.132.17.186)
May 13 09:17:48 10.29.246.47 62959: 161472: May 13 02:11:56.894 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 13 09:17:48 10.29.246.47 62960: 161473: May 13 02:11:57.034 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 13 09:17:49 10.29.246.47 62961: 161474: May 13 02:11:57.962 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 13 09:18:43 10.29.246.47 62962: 161475: May 13 02:12:51.966 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 13 09:18:43 10.29.246.47 62963: 161476: May 13 02:12:52.046 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 13 10:23:48 10.29.246.47 62966: 161479: May 13 03:17:57.681 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 13 10:23:48 10.29.246.47 62964: 161477: May 13 03:17:56.689 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Up->Down
May 13 10:23:48 10.29.246.47 62965: 161478: May 13 03:17:56.801 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 13 10:24:43 10.29.246.47 62967: 161480: May 13 03:18:51.689 UTC: %TRACKING-5-STATE: 10 ip sla 10 reachability Down->Up
May 13 10:24:43 10.29.246.47 62968: 161481: May 13 03:18:51.801 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 13 16:23:00 10.29.246.32 144506: 6327510: May 13 09:17:08.851 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Standby -> Active
May 13 16:23:55 10.29.246.32 144507: 6327524: May 13 09:18:03.847 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 13 16:23:55 10.29.246.32 144508: 6327525: May 13 09:18:04.695 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
May 13 16:23:55 10.29.246.32 144507: 6327524: May 13 09:18:03.847 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Active -> Speak
May 13 16:23:55 10.29.246.32 144508: 6327525: May 13 09:18:04.695 UTC: %HSRP-5-STATECHANGE: GigabitEthernet0/2 Grp 10 state Speak -> Standby
i have Subscribed the service correct, you can see ss in my new upload
apparently the last captured syslog 13 May 2013 and not collecting again.
i will appreciate all suggest for this issue.
Similar Messages
-
LMS 3.2 - Syslog Config fetch not working
Hello,
the syslog config fetch on my LMS 3.2 with RME 4.3.0 is not working.
I get syslog messages from devices and the count in the syslog collector status is okay.
But in the syslog message summary in device center the count is not getting higher with every message.
And the config fetch is not working.
I changed the logging level in the collector-properties to "debug" and got the following messages for a device which I want to fetch:
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssEmblemProcessor - About to process the syslog string : Jun 07 14:40:23 10.155.224.102 53: Jun 7 14:39:57: %SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssEmblemAFormatParser@13bd574
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssEmblemBFormatParser@13adc56
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.FcssGenericFormatParser@157aa53
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parser : com.cisco.nm.rmeng.fcss.common.CSSSyslogFormatParser@6f50a8
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemA not valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemB not valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, EmblemA valid.
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Setting daemon date
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, After adjusting the offset Mon Jun 07 14:40:23 CEST 2010 GMT 7 Jun 2010 12:40:23 GMT
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Parsed using the parser : com.cisco.nm.rmeng.fcss.common.FcssGenericFormatParser@157aa53
SyslogCollector - [Thread: EvaluatorThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssEmblemProcessor - Valid EMBLEM format. Passing on...
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Converted syslog to filter string. Filter string is 10.155.224.102;;;SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, ^((10\.161\.1\.45);;;(\S+)(-(\S+))?-(.*)(-(.*\s*))?\s*:\s*.*)$
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, FcssFilterPatternSet- inside 6
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, getInterestedSubscribers() - Incrementing filtered count for HNW2K3CISCO03
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, getInterestedSubscribers() - No interested subscribers. Returning null.
SyslogCollector - [Thread: FilterThread-0] DEBUG, 07 Jun 2010 14:40:24,546, Entered zero size
I attached the AnalyzerDebug.log, syslog_debug.log, SyslogAnalyzer.log and SyslogCollector.log for further informations.
Thanks for any advice!
SvenAfter I restarted the processes the syslog queue is empty and the config fetch works :-)
Output from syslog.log:
Jun 15 09:37:51 4.72.80.13 3131: Jun 15 09:36:59.881: %SYS-5-CONFIG_I: Configured from console by shru1307 on vty0 (4.26.16.20)
Output from AnalyzerDebug.log:
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,74,Invoking Config collection for syslog message
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,81,Before triggering syslog config fetch
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,83,Syslog Timestamp Tue Jun 15 09:37:51 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,85,DCMA Endtime String 2010-06-10 00:51:02.94
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,90,DCMA Endtime String after formatting Thu Jun 10 00:51:02 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,98,Buffer Time after adding 5 minutes Thu Jun 10 00:56:02 CEST 2010
[ Tue Jun 15 09:37:52 CEST 2010 ],INFO ,[Thread-2],com.cisco.nm.rmeng.dcma.client.RmeSaDcmaActionHandler,act,101,Triggering fetch on syslog since Timestamp > bufferTime
My last question is now, what can I do that the syslog queue will not getting full one more time?
Is logrot a solution? My syslog.log will be rotated at 128 MB.
Thanks a lot!
Sven -
LMS 3.2 Syslog Collector error
Hi,
At RME: ToolsSyslogSyslog Collector Status screen at table Collector Status No records.
I had changed hostname on this server and i have ran /opt/CSCOpx/bin/perl /opt/CSCOpx/bin/hostnamechange.pl script with proprer parameters.
Now I cannot add collector, because of "SSL certificate status" error:
SSL certificate issue occurred, check if:
1. The Self-signed Certificates are valid. For example, Check the certificate expiry date on the servers.
2. The Self-signed Certificates of this server are copied to the Syslog Collector server and vice-versa.
To do this, go to Common Services > Server > Security > Multi-Server Trust Management > Peer Server Certificate Setup. and add the certificate. See the User Guide for CiscoWorks Common Services for more details..
3.The SyslogCollector process on Syslog Collector server and the SyslogAnalyzer process in the current working server are restarted after Step 2.
4.Both hosts are reachable by host name.
Collector status : Could not connect to the collector _myhostname_._mydomainname_ due to SSL certificate issue
I use an third party Certificate, and https access is working propery for user access.
I want to run Syslog Collector locally, syslog file is a local server hence I use syslog-ng for other reason.
This is my SyslogCollector log:
SyslogCollector - [Thread: main] INFO , 24 Mar 2011 16:47:45,305, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 24 Mar 2011 16:47:45,308, System Initialized.
SyslogCollector - [Thread: main] INFO , 24 Mar 2011 16:47:45,408, Queue Cap 100000
SyslogCollector - [Thread: main] INFO , 24 Mar 2011 16:47:47,699, Service started...
How can I correct this situation, how can I run Syslog Collector.
BalazsTry unsubscribing and subscribing the collector so it can accept the updated info. If that does not work, post the SyslogAnalyzerUI.log and SyslogCollector.log from CSCOpx/log directory.
-
Can I and then how do I subscribe my LMS 4.02 to my LMS 3.2 syslog collector?
We are migrating to LMS 4.0.2, but our syslogs are curerently being sent to our LMS 3.2 server. Can I subscribe to our LMS3.2 syslog collector? Or
read this:
http://support.apple.com/kb/HT2109 -
MDW Data Collector doesn't work, meaning the custom_Snapshot table isn't created? Why? ? ?
I think the issue is with a long query in XML. Please, how to make this work?
Here are the definitions I used:
STEP 1 --- Find Collecter TYPE ID from
SELECT collector_type_uid ,* FROM [msdb].[dbo].[syscollector_collector_types_internal]
STEP 2 -- find the schedule
STEP 3 -- create collection SET using a SP
DECLARE @collectionsetid int
DECLARE @collectionsetuid uniqueidentifier
EXEC [msdb].[dbo].[sp_syscollector_create_collection_set]
@name=N'Index Fragmentation Usage Report3',
@collection_mode=1, -- Non-cached mode
@description=N'Records fragmentation of indexes over 100 pages AGAIN',
@days_until_expiration=30, -- 400=A year and a month --number of days
@schedule_uid='C40E90DE-5ECC-4B89-9DF8-424DD6160A0A',
@collection_set_id=@collectionsetid OUTPUT,
@collection_set_uid=@collectionsetuid OUTPUT
STEP 4 --- Create the job definition and QUERY
DECLARE @parameters XML
Set @parameters=' <ns:TSQLQueryCollector xmlns:ns="DataCollectorType">
<Query>
<Value>Select
db_name([database_id])+''.''+Sch.[Name]+''.''+T.[Name]+''.''+Indexes.[Name] as [IndexName], S.
[FragmentationPercentage]
FROM (Select
[database_id], [object_id], [index_id],
Sum(avg_fragmentation_in_percent *
page_count)/Sum(page_count) as [FragmentationPercentage]
FROM sys.dm_db_index_physical_stats( db_id(), NULL, NULL, NULL,
''DETAILED'')
Where index_type_desc IN (''CLUSTERED INDEX'',''NONCLUSTERED INDEX'')
AND alloc_unit_type_desc=''IN_ROW_DATA''
Group by [database_id],[object_id],[index_id]
) S
Join Sys.objects T On S.[object_id] = T.[object_id]
Join Sys.schemas sch On Sch.[schema_id] = T.[schema_id]
Join Sys.Indexes On Indexes.[Object_id] = S.[Object_Id] And
Indexes.[Index_id] = S.[Index_id] </Value>
<OutputTable>IndexFragmentation</OutputTable>
</Query>
<Databases UseUserDatabases="true" />
</ns:TSQLQueryCollector> '
DECLARE @collectionitem INT
EXEC [msdb].[dbo].[sp_syscollector_create_collection_item]
@name=N'Index Fragmentation3',
@parameters=@parameters,
@collection_item_id=@collectionitem OUTPUT,
@collection_set_id=10,
@collector_type_uid='302E93D1-3424-4BE7-AA8E-84813ECF2419'
After the Data Collector is created, and I run it by right clicking it and select "collect and upload now", it isn't creating the custom_snapshot table that it should create????? PLease what am I doing wrong????Can you please fix your query? . I was getting Divide by Zero error. you need to check if SUM(page_count) is 0, and replace it with non-zero value
Here is the sample script :
https://gist.github.com/sethusrinivasan/1bc23477936be4677e61#file-custom_collectionset
Thanks
Sethu Srinivasan [MSFT]
SQL Server -
LMS 4.2 Syslog Collector for Windows Server 2008SR2 ?
Hi together.
Is there an .ISO file for installing on Windows Server20888SR2 ?
I only found the version for RedHat Linux.......
Thanks for your answers
Greets
MikeThe windows LMS 4.2 install medai comes with in build packaged RSAC.
You can run the LMS 4.2 exe file, it before giving you a first screen would extract itself in temp files. In those temp extracted files you can see RSAC folder, which you can copy to other directory and terminate installation for LMS 4.2.
To go to TEMP dir, you can got to start > run > (type) %temp%.
-Thanks -
Integrate Remote Syslog Collector with LMS 4.1
We have LMS 4.1 in our network. We had recently installed Remote Syslog Collector on a new Server to collect logs from all the devices. How can we integrate the Remote Syslog Collector with the LMS Server?
Thanks in Advance.You simply have to subscribe the IP address of the Remote Syslog Collector in Ciscowork LMS server under :
Admin > Collection Settings > Syslog > Syslog Collector Status
Once it is subscribed, it should start working, simialar to how it works when Syslog Collector is Local on LMS server.
For more details see docuement :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/install/guide/appendc.html#wp1049873
-Thanks -
LMS 4.2 – Missing messages in Remote Syslog Collector
Remote syslog Collector are dropping syslog messages - randomly. During analyzing we found out that syslog messages are stored in RSAC in file: /var/log/syslog_info
According to information from /etc/rsyslog.conf are the same syslog messages stored again in other files: /var/log/messages, /var/log/boot.log
In every file are missing the same messages. Load of RSAC and physical server is very low. When we send messages to more syslog servers (for example to other debian server in the same or different vlan) in the same physical server in vmware, we always receive every message.
We are using LMS 4.2.3 (Soft appliance) and for syslog messages RSAC 5.2 (linux in vmware). We receive approximately 200-300k syslog messages per day and RSAC drop approximately 100k.
Please what we have to change to receive all messages?
Why RSAC store the same messages more times?
Thanks
MilosI think this should change what you want - if not, revert it to the default:
for security, make a backup of the following file and open it in a text editor:
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
change the following to a value that might fit your needs but be careful this can affect system performance:
QUEUE_CAPACITY=100000
save the file and restart the following syslog processes:
in a DOS box check the status of the following processes (they should be started) and restart them:
pdshow SyslogAnalyzer SyslogCollector
pdterm SyslogAnalyzer SyslogCollector
pdexec SyslogAnalyzer SyslogCollector
pdshow SyslogAnalyzer SyslogCollector
now, try to re-run your report. -
LMS 3.2 Syslog is not showing Report
Hello,
I have LMS 3.2 that is having Syslog reporting problem. The syslog messages are being sent to LMS and i can see them in the CSCOpx->log->syslog.log but when i try to generate a 24-hour report,the report is generated without any records.
1- i tried to solved the problem by stopping the cisco works Daemon manger and CWCS syslog services then delete the syslog.log file.
So after restarting these services the report worked for 4-5 mins and then stopped. Therfore the 24-hour report started displaying only the syslog
messages are were pulled within the 4-5 mins that LMS worked.
2- I repeated the process again but this time with no luck at all.
3- I checked the Syslog Collector Status and it showed the following :
SSL certificate status
SSL certificates are valid and properly imported
Collector status
Collector 10.0.1.132 is up and reachable
i have posted the SyslogAnalyzer and SyslogCollector.log
Please if anyone can help i would be appreciated .
Regards,
GeorgeHi,
Its still possible that some services on server might be using the ports. Another possibility is to have improper SSL certificates. Try to re-generate SSL certificates with the host name of the server and not the FQDN even though server is now part of AD.
Here is the procedure to re-generate SSL Certificates from CLI :-
a.Stop Daemons
C:\net stop crmdmgtd
b. Remove server.* under NMSROOT\MDC\Apache\conf\ssl
c. Run the following commands:
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (fill up the certificate info) when you will be prompt to enter server host name. kindly enter the server name and not FQDN.
If you are not using SSL connectivity to CiscoWorks
CSCOpx\MDC\Apache\bin\ConfigSSL.pl -disable
d.Restart Daemons
c:\net start crmdmgtd.
Since the server is now part of the domain, kindly make sure you have server FQDN entry into the server host file at location :- WINDOWS\system32\drivers\etc\host
If it still dont work then we need to enable the debugging for Syslog Collector. This can achieved by changing the INFO to DEBUG in Collector.propert
ies file. Here is the procedure.
1> Stop syslog collector process on the server (you can do this from the command line prompt):
> pdterm SyslogCollector
2. Open and edit the
CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/csco/nm/rmeng/csc/data/Collector.propert
ies file, and change the line from
DEBUG_LEVEL=INFO
to
DEBUG_LEVEL=DEBUG
Then, save the file.
3. Restart syslog collector process.
> pdexec SyslogCollector
Try to reproduce the issue and send debug log from location :- CSCOpx/log/SyslogCollector.log
Thanks,
Gaganjeet -
Slim doesn't works but LXDE is ok
Hello (and sorry for my english )
I installed today arch linux on my laptop. At the beginning, everything was ok, slim worked fine. After playing with the policykit issue (see "I won the struggle against hal and policykit": http://bbs.archlinux.org/viewtopic.php?id=65070 )and installing the networkmanager (both are working now), slim doesn't works any more - I get a black screen with no mouse and nothing. I think that the problem is slim itself, because if I tipe "startx" from the commandline as normal user (after having killed X as root) lxde starts and everything works. I tried to reinstall slim but it doesn't works.
I don't know which files to post, so here are two of them
[swisstux@inspiron ~]$ cat .xinitrc
exec ck-launch-session startlxde
[swisstux@inspiron ~]$ cat /etc/rc.conf
DAEMONS=(syslog-ng polkitparser hal @cpufreq @laptop-mode @networkmanager @crond @alsa @slim)it says only this:
slim: Stale lockfile found, removing it
it is a bit slow (too slow, on another PC it is 10 times faster), but it works if I start it from the command line. just on boot it doesn't works.
edit: here is the log of slim starting at boot and at the end the log of slim starting from the shell: http://pastebin.com/m4b6fad81
second edit: I removed every "@" from the daemon's list in rc.conf and now it works. but it is still really slow
Last edited by swisstux (2009-04-16 17:53:25) -
[Solved] Network doesn't work after hibernate?
Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)? -
[SOLVED]mounting cdrom and usb devices doesn't work
Hello,
i have trouble mounting my usb devices. automount doesn't work and i can't mount them manually even as a superuser. here's the output of mount command:
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
i can mount cdrom manually but i can't do the same for my usb stick and external hard drives. it always complains about the above regardless of the filesystem. my devices are working under windows and other linuxes so i know hardware is not the problem.
i'm using lxde with pcmanfm.
if you need any other files just ask.
thanks
Last edited by the gray (2009-03-16 20:15:18)above was the error when i tried to mount any usb device with "mount -t <type> /dev/sdc /media/mountpoint". and i couldn't mount any usb device as root from console. when i tried to mount devices using pcmanfm it just popped some empty dialogs and i couldn't find any mention of "IsCallerPriviliged failed" error so i (wrongly) presumed it wasn't that. i did try some of the other fixes mentioned in the forum with no success. but adding exec ck-launch-session startkde to my .xinitrc fixed the issue
thanks again
Last edited by the gray (2009-03-16 20:17:53) -
HI
i was upgrade ,and install the fontconfig ，then reboot
reboot
show this
systemd [1]:Default target masked.
kvm: dissabled by bios
welcome to rescue mode! type "systemctl default" or ^D to enter defauld mode.
i followed message
[root@archlinux Desktop]# systemctl default
Failed to start default.target: Operation refused, unit may not be isolated
then
# systemctl list-unit-files
i found this
default.target masked
graphical.target masked
slim.service enabled
display-manager.service enabled
but
# startx
is working .my xfce4 working well
just slim not work
then , i fould " graphical.target " is null
i edited it, now
cat /usr/lib/systemd/system/graphical.target
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Graphical Interface
Documentation=man:systemd.special(7)
Requires=multi-user.target
After=multi-user.target
Conflicts=rescue.target
Wants=display-manager.service
AllowIsolate=yes
[Install]
Alias=default.target
then reboot, seems like solved "default.target masked" problem.
"default target masked. kvm: dissabled by bios .welcome to rescue mode! ......."no longer show
but ,slim still doesn't working
now
[root@archlinux Desktop]# cat /var/log/slim.log
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slimslimslim: unexpected signal 1
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15
slim: connection to X server lost.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
# systemctl
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:02.0-0000:01:00.1-sound-card1.device loaded active plugged Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
sys-devices-pci0000:00-0000:00:09.0-0000:03:00.0-net-enp3s0.device loaded active plugged Motherboard
sys-devices-pci0000:00-0000...ata3-host2-target2:0:0-2:0:0:0-block-sda-sda1.device loaded active plugged Samsung_SSD_840_PRO_Series
sys-devices-pci0000:00-0000...11.0-ata3-host2-target2:0:0-2:0:0:0-block-sda.device loaded active plugged Samsung_SSD_840_PRO_Series
sys-devices-pci0000:00-0000...ata5-host4-target4:0:0-4:0:0:0-block-sdb-sdb1.device loaded active plugged WDC_WD10EZEX-00RKKA0
sys-devices-pci0000:00-0000...ata5-host4-target4:0:0-4:0:0:0-block-sdb-sdb2.device loaded active plugged WDC_WD10EZEX-00RKKA0
sys-devices-pci0000:00-0000...ata5-host4-target4:0:0-4:0:0:0-block-sdb-sdb3.device loaded active plugged WDC_WD10EZEX-00RKKA0
sys-devices-pci0000:00-0000...ata5-host4-target4:0:0-4:0:0:0-block-sdb-sdb4.device loaded active plugged WDC_WD10EZEX-00RKKA0
sys-devices-pci0000:00-0000...ata5-host4-target4:0:0-4:0:0:0-block-sdb-sdb5.device loaded active plugged WDC_WD10EZEX-00RKKA0
sys-devices-pci0000:00-0000...11.0-ata5-host4-target4:0:0-4:0:0:0-block-sdb.device loaded active plugged WDC_WD10EZEX-00RKKA0
sys-devices-pci0000:00-0000:00:13.2-usb4-4\x2d5-4\x2d5:1.2-sound-card2.device loaded active plugged LifeCam HD-3000
sys-devices-pci0000:00-0000:00:14.2-sound-card0.device loaded active plugged SBx00 Azalia (Intel HDA)
sys-devices-pci0000:00-0000:00:14.4-0000:04:07.0-ieee80211-phy0-rfkill0.device loaded active plugged /sys/devices/pci0000:00/0000:00:14.4/0000:04:07.0/ieee80211/phy0/rfkill0
sys-devices-pci0000:00-0000:00:14.4-0000:04:07.0-net-wlp4s7.device loaded active plugged AR9227 Wireless Network Adapter
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-pnp0-00:07-tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:07/tty/ttyS0
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-net-devices-enp3s0.device loaded active plugged Motherboard
sys-subsystem-net-devices-wlp4s7.device loaded active plugged AR9227 Wireless Network Adapter
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-1.scope loaded active running Session 1 of user root
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
[email protected] loaded active running Automatic wireless network connection using netctl profiles
polkit.service loaded active running Authorization Manager
slim.service loaded failed failed SLiM Simple Login Manager
systemd-fsck@dev-disk-by\x2...1453\x2d3192\x2d4cc8\x2d835b\x2d88b9c09ca231.service loaded active exited File System Check on /dev/disk/by-uuid/40311453-3192-4cc8-835b-88b9c09ca231
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create static device nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for UID 0
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-netctl.slice loaded active active system-netctl.slice
system-netctl\x2dauto.slice loaded active active system-netctl\x2dauto.slice
system-systemd\x2dfsck.slice loaded active active system-systemd\x2dfsck.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-0.slice loaded active active user-0.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sdb4.swap loaded active active /dev/sdb4
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
89 loaded units listed. Pass --all to see loaded but inactive units, too.
# systemctl list-unit-files
UNIT FILE STATE
proc-sys-fs-binfmt_misc.automount static
org.freedesktop.hostname1.busname static
org.freedesktop.locale1.busname static
org.freedesktop.login1.busname static
org.freedesktop.machine1.busname static
org.freedesktop.timedate1.busname static
dev-hugepages.mount static
dev-mqueue.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount static
systemd-ask-password-console.path static
systemd-ask-password-wall.path static
session-1.scope static
alsa-restore.service static
alsa-state.service static
alsa-store.service static
[email protected] disabled
avahi-daemon.service disabled
avahi-dnsconfd.service disabled
proc-sys-fs-binfmt_misc.automount static
org.freedesktop.hostname1.busname static
org.freedesktop.locale1.busname static
org.freedesktop.login1.busname static
org.freedesktop.machine1.busname static
org.freedesktop.timedate1.busname static
dev-hugepages.mount static
dev-mqueue.mount static
proc-sys-fs-binfmt_misc.mount static
sys-fs-fuse-connections.mount static
sys-kernel-config.mount static
sys-kernel-debug.mount static
tmp.mount static
systemd-ask-password-console.path static
systemd-ask-password-wall.path static
session-1.scope static
alsa-restore.service static
alsa-state.service static
alsa-store.service static
[email protected] disabled
avahi-daemon.service disabled
avahi-dnsconfd.service disabled
canberra-system-bootup.service disabled
canberra-system-shutdown-reboot.service disabled
canberra-system-shutdown.service disabled
colord.service static
console-getty.service disabled
console-shell.service disabled
[email protected] static
cronie.service disabled
dbus-org.freedesktop.hostname1.service static
dbus-org.freedesktop.locale1.service static
dbus-org.freedesktop.login1.service static
dbus-org.freedesktop.machine1.service static
dbus-org.freedesktop.timedate1.service static
dbus.service static
debug-shell.service disabled
dhcpcd.service disabled
[email protected] disabled
display-manager.service enabled
dmeventd.service static
emergency.service static
fancontrol.service disabled
ftpd.service disabled
[email protected] enabled
gpm.service disabled
healthd.service disabled
initrd-cleanup.service static
initrd-parse-etc.service static
initrd-switch-root.service static
initrd-udevadm-cleanup-db.service static
ip6tables.service disabled
iptables.service disabled
kdm.service disabled
kmod-static-nodes.service static
krb5-kadmind.service disabled
krb5-kdc.service disabled
krb5-kpropd.service disabled
[email protected] static
lm_sensors.service disabled
lvm-monitoring.service disabled
lvmetad.service static
mdadm.service disabled
[email protected] static
mkinitcpio-generate-shutdown-ramfs.service static
mysqld.service disabled
[email protected] enabled
[email protected] disabled
netctl-sleep.service disabled
netctl.service disabled
[email protected] static
netctl@my\x2dnetwork.service enabled
nscd.service disabled
polkit.service static
quotaon.service static
rescue.service static
[email protected] static
[email protected] static
sensord.service disabled
[email protected] disabled
slim.service enabled
speech-dispatcherd.service disabled
systemd-ask-password-console.service static
systemd-ask-password-wall.service static
[email protected] static
systemd-binfmt.service static
systemd-fsck-root.service static
[email protected] static
systemd-halt.service static
systemd-hibernate.service static
systemd-hostnamed.service static
systemd-hybrid-sleep.service static
systemd-initctl.service static
systemd-journal-flush.service static
systemd-journal-gatewayd.service static
systemd-journald.service static
systemd-kexec.service static
systemd-localed.service static
systemd-logind.service static
systemd-machined.service static
systemd-modules-load.service static
systemd-networkd.service disabled
[email protected] disabled
systemd-poweroff.service static
systemd-quotacheck.service static
systemd-random-seed.service static
systemd-readahead-collect.service disabled
systemd-readahead-done.service static
systemd-readahead-drop.service disabled
systemd-readahead-replay.service disabled
systemd-reboot.service static
systemd-remount-fs.service static
[email protected] static
systemd-shutdownd.service static
systemd-suspend.service static
systemd-sysctl.service static
systemd-timedated.service static
systemd-tmpfiles-clean.service static
systemd-tmpfiles-setup-dev.service static
systemd-tmpfiles-setup.service static
systemd-udev-settle.service static
systemd-udev-trigger.service static
systemd-udevd.service static
systemd-update-utmp-runlevel.service static
systemd-update-utmp.service static
systemd-user-sessions.service static
systemd-vconsole-setup.service static
talk.service static
[email protected] static
udisks.service disabled
udisks2.service static
upower.service disabled
usbmuxd.service static
[email protected] static
uuidd.service static
[email protected] disabled
[email protected] disabled
wpa_supplicant.service disabled
[email protected] disabled
-.slice static
machine.slice static
system.slice static
user.slice static
avahi-daemon.socket disabled
dbus.socket static
dmeventd.socket static
krb5-kpropd.socket disabled
lvmetad.socket static
rlogin.socket disabled
rsh.socket disabled
syslog.socket static
systemd-initctl.socket static
systemd-journal-gatewayd.socket disabled
systemd-journald.socket static
systemd-shutdownd.socket static
systemd-udevd-control.socket static
systemd-udevd-kernel.socket static
talk.socket disabled
telnet.socket disabled
uuidd.socket disabled
basic.target static
bluetooth.target static
busnames.target static
systemd-sysctl.service static
systemd-timedated.service static
systemd-tmpfiles-clean.service static
systemd-tmpfiles-setup-dev.service static
systemd-tmpfiles-setup.service static
systemd-udev-settle.service static
systemd-udev-trigger.service static
systemd-udevd.service static
systemd-update-utmp-runlevel.service static
systemd-update-utmp.service static
systemd-user-sessions.service static
systemd-vconsole-setup.service static
talk.service static
[email protected] static
udisks.service disabled
udisks2.service static
upower.service disabled
usbmuxd.service static
[email protected] static
uuidd.service static
[email protected] disabled
[email protected] disabled
wpa_supplicant.service disabled
[email protected] disabled
-.slice static
machine.slice static
system.slice static
user.slice static
avahi-daemon.socket disabled
dbus.socket static
dmeventd.socket static
krb5-kpropd.socket disabled
lvmetad.socket static
rlogin.socket disabled
rsh.socket disabled
syslog.socket static
systemd-initctl.socket static
systemd-journal-gatewayd.socket disabled
systemd-journald.socket static
systemd-shutdownd.socket static
systemd-udevd-control.socket static
systemd-udevd-kernel.socket static
talk.socket disabled
telnet.socket disabled
uuidd.socket disabled
basic.target static
bluetooth.target static
busnames.target static
cryptsetup.target static
ctrl-alt-del.target disabled
default.target enabled
emergency.target static
final.target static
getty.target static
graphical.target enabled
halt.target disabled
hibernate.target static
hybrid-sleep.target static
initrd-fs.target static
initrd-root-fs.target static
initrd-switch-root.target static
initrd.target static
kexec.target disabled
local-fs-pre.target static
local-fs.target static
multi-user.target static
network-online.target static
network.target static
nss-lookup.target static
nss-user-lookup.target static
paths.target static
poweroff.target disabled
printer.target static
reboot.target disabled
remote-fs-pre.target static
remote-fs.target enabled
rescue.target disabled
rpcbind.target static
shutdown.target static
sigpwr.target static
sleep.target static
slices.target static
smartcard.target static
sockets.target static
sound.target static
suspend.target static
swap.target static
sysinit.target static
system-update.target static
time-sync.target static
timers.target static
umount.target static
systemd-readahead-done.timer static
systemd-tmpfiles-clean.timer static
209 unit files listed.
slim.conf
# cat /etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Set directory that contains the xsessions.
# slim reads xsesion from this directory, and be able to select.
sessiondir /usr/share/xsessions/
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
#default_user simone
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme default
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
Last edited by hyang (2014-03-10 06:22:59)Rexilion wrote:
Apparently, whenever default.target is unavailable systemD enters rescue mode. That's okay.
Maybe post the contents of /var/log/Xorg.0.log and /var/log/slim.log?
slim.log
# cat /var/log/slim.log
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slimslimslim: unexpected signal 1
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: unexpected signal 15
slim: connection to X server lost.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: pam_authentication(): Authentication failure
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to shut down
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
slim: waiting for X server to begin accepting connections.
/var/log/Xorg.0.log
# cat /var/log/Xorg.0.log
[ 18.167]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 18.167] X Protocol Version 11, Revision 0
[ 18.167] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 18.167] Current Operating System: Linux archlinux 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:47:48 CET 2014 x86_64
[ 18.168] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=40311453-3192-4cc8-835b-88b9c09ca231 rw quiet
[ 18.168] Build Date: 09 January 2014 08:47:24AM
[ 18.168]
[ 18.168] Current version of pixman: 0.32.4
[ 18.168] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.168] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.168] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 10 11:07:28 2014
[ 18.223] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.223] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.256] (==) No Layout section. Using the first Screen section.
[ 18.256] (==) No screen section available. Using defaults.
[ 18.256] (**) |-->Screen "Default Screen Section" (0)
[ 18.256] (**) | |-->Monitor "<default monitor>"
[ 18.257] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.257] (==) Automatically adding devices
[ 18.257] (==) Automatically enabling devices
[ 18.257] (==) Automatically adding GPU devices
[ 18.303] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 18.303] Entry deleted from font path.
[ 18.312] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 18.312] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.312] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.312] (II) Loader magic: 0x804c80
[ 18.312] (II) Module ABI versions:
[ 18.312] X.Org ANSI C Emulation: 0.4
[ 18.312] X.Org Video Driver: 15.0
[ 18.312] X.Org XInput driver : 20.0
[ 18.312] X.Org Server Extension : 8.0
[ 18.313] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.316] (--) PCI:*(0:1:0:0) 1002:6819:174b:e221 rev 0, Mem @ 0xd0000000/268435456, 0xfdd80000/262144, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
[ 18.316] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.316] Initializing built-in extension Generic Event Extension
[ 18.316] Initializing built-in extension SHAPE
[ 18.316] Initializing built-in extension MIT-SHM
[ 18.316] Initializing built-in extension XInputExtension
[ 18.316] Initializing built-in extension XTEST
[ 18.317] Initializing built-in extension BIG-REQUESTS
[ 18.317] Initializing built-in extension SYNC
[ 18.317] Initializing built-in extension XKEYBOARD
[ 18.317] Initializing built-in extension XC-MISC
[ 18.317] Initializing built-in extension SECURITY
[ 18.317] Initializing built-in extension XINERAMA
[ 18.317] Initializing built-in extension XFIXES
[ 18.317] Initializing built-in extension RENDER
[ 18.317] Initializing built-in extension RANDR
[ 18.317] Initializing built-in extension COMPOSITE
[ 18.317] Initializing built-in extension DAMAGE
[ 18.317] Initializing built-in extension MIT-SCREEN-SAVER
[ 18.317] Initializing built-in extension DOUBLE-BUFFER
[ 18.317] Initializing built-in extension RECORD
[ 18.317] Initializing built-in extension DPMS
[ 18.317] Initializing built-in extension Present
[ 18.318] Initializing built-in extension DRI3
[ 18.318] Initializing built-in extension X-Resource
[ 18.318] Initializing built-in extension XVideo
[ 18.318] Initializing built-in extension XVideo-MotionCompensation
[ 18.318] Initializing built-in extension XFree86-VidModeExtension
[ 18.318] Initializing built-in extension XFree86-DGA
[ 18.318] Initializing built-in extension XFree86-DRI
[ 18.318] Initializing built-in extension DRI2
[ 18.318] (II) "glx" will be loaded by default.
[ 18.318] (II) LoadModule: "dri2"
[ 18.318] (II) Module "dri2" already built-in
[ 18.318] (II) LoadModule: "glamoregl"
[ 18.353] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.438] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.438] compiled for 1.15.0, module version = 0.6.0
[ 18.438] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.438] (II) LoadModule: "glx"
[ 18.439] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.451] (II) Module glx: vendor="X.Org Foundation"
[ 18.451] compiled for 1.15.0, module version = 1.0.0
[ 18.451] ABI class: X.Org Server Extension, version 8.0
[ 18.451] (==) AIGLX enabled
[ 18.451] Loading extension GLX
[ 18.451] (==) Matched ati as autoconfigured driver 0
[ 18.451] (==) Matched ati as autoconfigured driver 1
[ 18.451] (==) Matched modesetting as autoconfigured driver 2
[ 18.451] (==) Matched fbdev as autoconfigured driver 3
[ 18.451] (==) Matched vesa as autoconfigured driver 4
[ 18.451] (==) Assigned the driver to the xf86ConfigLayout
[ 18.451] (II) LoadModule: "ati"
[ 18.452] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 18.462] (II) Module ati: vendor="X.Org Foundation"
[ 18.462] compiled for 1.15.0, module version = 7.3.0
[ 18.462] Module class: X.Org Video Driver
[ 18.462] ABI class: X.Org Video Driver, version 15.0
[ 18.462] (II) LoadModule: "radeon"
[ 18.462] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 18.468] (II) Module radeon: vendor="X.Org Foundation"
[ 18.468] compiled for 1.15.0, module version = 7.3.0
[ 18.468] Module class: X.Org Video Driver
[ 18.468] ABI class: X.Org Video Driver, version 15.0
[ 18.468] (II) LoadModule: "modesetting"
[ 18.469] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.478] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.478] compiled for 1.15.0, module version = 0.8.1
[ 18.479] Module class: X.Org Video Driver
[ 18.479] ABI class: X.Org Video Driver, version 15.0
[ 18.479] (II) LoadModule: "fbdev"
[ 18.479] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.483] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.483] compiled for 1.15.0, module version = 0.4.4
[ 18.483] Module class: X.Org Video Driver
[ 18.483] ABI class: X.Org Video Driver, version 15.0
[ 18.483] (II) LoadModule: "vesa"
[ 18.484] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.488] (II) Module vesa: vendor="X.Org Foundation"
[ 18.488] compiled for 1.15.0, module version = 2.3.2
[ 18.488] Module class: X.Org Video Driver
[ 18.488] ABI class: X.Org Video Driver, version 15.0
[ 18.488] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 18.497] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.497] (II) FBDEV: driver for framebuffer: fbdev
[ 18.497] (II) VESA: driver for VESA chipsets: vesa
[ 18.497] (++) using VT number 1
[ 18.497] (II) [KMS] Kernel modesetting enabled.
[ 18.498] (WW) Falling back to old probe method for modesetting
[ 18.498] (WW) Falling back to old probe method for fbdev
[ 18.498] (II) Loading sub module "fbdevhw"
[ 18.498] (II) LoadModule: "fbdevhw"
[ 18.498] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.507] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.507] compiled for 1.15.0, module version = 0.0.2
[ 18.507] ABI class: X.Org Video Driver, version 15.0
[ 18.507] (WW) Falling back to old probe method for vesa
[ 18.507] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.507] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 18.507] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 18.507] (==) RADEON(0): Default visual is TrueColor
[ 18.507] (==) RADEON(0): RGB weight 888
[ 18.507] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 18.507] (--) RADEON(0): Chipset: "PITCAIRN" (ChipID = 0x6819)
[ 18.507] (II) Loading sub module "dri2"
[ 18.507] (II) LoadModule: "dri2"
[ 18.507] (II) Module "dri2" already built-in
[ 18.507] (II) Loading sub module "glamoregl"
[ 18.507] (II) LoadModule: "glamoregl"
[ 18.508] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.508] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.508] compiled for 1.15.0, module version = 0.6.0
[ 18.508] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.508] (II) glamor: OpenGL accelerated X.org driver based.
[ 18.984] (II) glamor: EGL version 1.4 (DRI2):
[ 19.023] (II) RADEON(0): glamor detected, initialising EGL layer.
[ 19.023] (II) RADEON(0): KMS Color Tiling: enabled
[ 19.023] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 19.023] (II) RADEON(0): KMS Pageflipping: enabled
[ 19.023] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 19.033] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[ 19.094] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 19.096] (II) RADEON(0): Output DVI-0 has no monitor section
[ 19.117] (II) RADEON(0): Output DVI-1 has no monitor section
[ 19.130] (II) RADEON(0): EDID for output DisplayPort-0
[ 19.190] (II) RADEON(0): EDID for output HDMI-0
[ 19.190] (II) RADEON(0): Manufacturer: GSM Model: 58da Serial#: 16843009
[ 19.190] (II) RADEON(0): Year: 2011 Week: 1
[ 19.190] (II) RADEON(0): EDID Version: 1.3
[ 19.190] (II) RADEON(0): Digital Display Input
[ 19.190] (II) RADEON(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 19.190] (II) RADEON(0): Gamma: 2.20
[ 19.190] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[ 19.190] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19.190] (II) RADEON(0): First detailed timing is preferred mode
[ 19.190] (II) RADEON(0): redX: 0.628 redY: 0.348 greenX: 0.345 greenY: 0.615
[ 19.190] (II) RADEON(0): blueX: 0.153 blueY: 0.057 whiteX: 0.313 whiteY: 0.329
[ 19.190] (II) RADEON(0): Supported established timings:
[ 19.190] (II) RADEON(0): 640x480@60Hz
[ 19.190] (II) RADEON(0): 800x600@60Hz
[ 19.190] (II) RADEON(0): 1024x768@60Hz
[ 19.190] (II) RADEON(0): Manufacturer's mask: 0
[ 19.190] (II) RADEON(0): Supported standard timings:
[ 19.190] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 19.190] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 19.190] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 19.190] (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
[ 19.190] (II) RADEON(0): Supported detailed timing:
[ 19.191] (II) RADEON(0): clock: 148.5 MHz Image Size: 510 x 290 mm
[ 19.191] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 19.191] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 19.191] (II) RADEON(0): Ranges: V min: 56 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
[ 19.191] (II) RADEON(0): Monitor name: IPS234
[ 19.191] (II) RADEON(0): Serial No:
[ 19.191] (II) RADEON(0): Supported detailed timing:
[ 19.191] (II) RADEON(0): clock: 148.5 MHz Image Size: 510 x 290 mm
[ 19.191] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 19.191] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 19.191] (II) RADEON(0): Supported detailed timing:
[ 19.191] (II) RADEON(0): clock: 74.2 MHz Image Size: 510 x 290 mm
[ 19.191] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 19.191] (II) RADEON(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 19.191] (II) RADEON(0): Supported detailed timing:
[ 19.191] (II) RADEON(0): clock: 74.2 MHz Image Size: 510 x 290 mm
[ 19.191] (II) RADEON(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 19.191] (II) RADEON(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 19.191] (II) RADEON(0): Supported detailed timing:
[ 19.191] (II) RADEON(0): clock: 27.0 MHz Image Size: 510 x 290 mm
[ 19.191] (II) RADEON(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 19.191] (II) RADEON(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 19.191] (II) RADEON(0): Number of EDID sections to follow: 1
[ 19.191] (II) RADEON(0): EDID (in hex):
[ 19.191] (II) RADEON(0): 00ffffffffffff001e6dda5801010101
[ 19.191] (II) RADEON(0): 0115010380331d78eac665a059589d27
[ 19.191] (II) RADEON(0): 0e5054210800b3008180814071400101
[ 19.191] (II) RADEON(0): 010101010101023a801871382d40582c
[ 19.191] (II) RADEON(0): 4500fe221100001e000000fd00383d1e
[ 19.191] (II) RADEON(0): 530f000a202020202020000000fc0049
[ 19.191] (II) RADEON(0): 50533233340a202020202020000000ff
[ 19.191] (II) RADEON(0): 000a202020202020202020202020011d
[ 19.191] (II) RADEON(0): 02031df14a900403011412051f101323
[ 19.191] (II) RADEON(0): 0907078301000065030c001000023a80
[ 19.191] (II) RADEON(0): 1871382d40582c4500fe221100001e01
[ 19.191] (II) RADEON(0): 1d8018711c1620582c2500fe22110000
[ 19.191] (II) RADEON(0): 9e011d007251d01e206e285500fe2211
[ 19.191] (II) RADEON(0): 00001e8c0ad08a20e02d10103e9600fe
[ 19.191] (II) RADEON(0): 22110000180000000000000000000000
[ 19.191] (II) RADEON(0): 000000000000000000000000000000e6
[ 19.191] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 19.191] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 19.191] (II) RADEON(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1152x864"x60.0 81.58 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
[ 19.191] (II) RADEON(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 19.191] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.191] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.191] (II) RADEON(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 19.191] (II) RADEON(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 19.191] (II) RADEON(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 19.191] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.191] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.193] (II) RADEON(0): EDID for output DVI-0
[ 19.213] (II) RADEON(0): EDID for output DVI-1
[ 19.213] (II) RADEON(0): Output DisplayPort-0 disconnected
[ 19.213] (II) RADEON(0): Output HDMI-0 connected
[ 19.213] (II) RADEON(0): Output DVI-0 disconnected
[ 19.213] (II) RADEON(0): Output DVI-1 disconnected
[ 19.213] (II) RADEON(0): Using exact sizes for initial modes
[ 19.213] (II) RADEON(0): Output HDMI-0 using initial mode 1920x1080
[ 19.213] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.214] (II) RADEON(0): mem size init: gart size :3fbde000 vram size: s:80000000 visible:7f7d7000
[ 19.214] (==) RADEON(0): DPI set to (96, 96)
[ 19.214] (II) Loading sub module "fb"
[ 19.214] (II) LoadModule: "fb"
[ 19.214] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.229] (II) Module fb: vendor="X.Org Foundation"
[ 19.229] compiled for 1.15.0, module version = 1.0.0
[ 19.229] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.229] (II) Loading sub module "ramdac"
[ 19.229] (II) LoadModule: "ramdac"
[ 19.229] (II) Module "ramdac" already built-in
[ 19.229] (II) UnloadModule: "modesetting"
[ 19.229] (II) Unloading modesetting
[ 19.229] (II) UnloadModule: "fbdev"
[ 19.229] (II) Unloading fbdev
[ 19.229] (II) UnloadSubModule: "fbdevhw"
[ 19.229] (II) Unloading fbdevhw
[ 19.229] (II) UnloadModule: "vesa"
[ 19.229] (II) Unloading vesa
[ 19.229] (--) Depth 24 pixmap format is 32 bpp
[ 19.230] (II) RADEON(0): [DRI2] Setup complete
[ 19.230] (II) RADEON(0): [DRI2] DRI driver: radeonsi
[ 19.230] (II) RADEON(0): [DRI2] VDPAU driver: radeonsi
[ 19.230] (II) RADEON(0): Front buffer size: 8640K
[ 19.230] (II) RADEON(0): VRAM usage limit set to 1872054K
[ 19.231] (==) RADEON(0): Backing store enabled
[ 19.231] (II) RADEON(0): Direct rendering enabled
[ 19.341] (II) RADEON(0): Use GLAMOR acceleration.
[ 19.341] (II) RADEON(0): Acceleration enabled
[ 19.341] (==) RADEON(0): DPMS enabled
[ 19.341] (==) RADEON(0): Silken mouse enabled
[ 19.342] (II) RADEON(0): Set up textured video (glamor)
[ 19.342] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[ 19.342] (II) RADEON(0): [XvMC] Extension initialized.
[ 19.342] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19.368] (--) RandR disabled
[ 19.377] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19.377] (II) AIGLX: enabled GLX_ARB_create_context
[ 19.377] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 19.377] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 19.377] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19.377] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19.377] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 19.377] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 19.377] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19.377] (II) AIGLX: Loaded and initialized radeonsi
[ 19.377] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19.390] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 19.687] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 19.687] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.687] (II) LoadModule: "evdev"
[ 19.687] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.743] (II) Module evdev: vendor="X.Org Foundation"
[ 19.743] compiled for 1.15.0, module version = 2.8.2
[ 19.743] Module class: X.Org XInput Driver
[ 19.743] ABI class: X.Org XInput driver, version 20.0
[ 19.743] (II) Using input driver 'evdev' for 'Power Button'
[ 19.743] (**) Power Button: always reports core events
[ 19.743] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 19.743] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.743] (--) evdev: Power Button: Found keys
[ 19.743] (II) evdev: Power Button: Configuring as keyboard
[ 19.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 19.743] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.743] (**) Option "xkb_rules" "evdev"
[ 19.743] (**) Option "xkb_model" "pc104"
[ 19.743] (**) Option "xkb_layout" "us"
[ 19.782] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.782] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.782] (II) Using input driver 'evdev' for 'Power Button'
[ 19.782] (**) Power Button: always reports core events
[ 19.782] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 19.782] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.782] (--) evdev: Power Button: Found keys
[ 19.782] (II) evdev: Power Button: Configuring as keyboard
[ 19.782] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 19.782] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 19.782] (**) Option "xkb_rules" "evdev"
[ 19.782] (**) Option "xkb_model" "pc104"
[ 19.782] (**) Option "xkb_layout" "us"
[ 19.782] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 19.782] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event20)
[ 19.782] (II) No input driver specified, ignoring this device.
[ 19.782] (II) This device may have been added with another device file.
[ 19.782] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event19)
[ 19.782] (II) No input driver specified, ignoring this device.
[ 19.782] (II) This device may have been added with another device file.
[ 19.782] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event18)
[ 19.782] (II) No input driver specified, ignoring this device.
[ 19.782] (II) This device may have been added with another device file.
[ 19.783] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event17)
[ 19.783] (II) No input driver specified, ignoring this device.
[ 19.783] (II) This device may have been added with another device file.
[ 19.783] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event16)
[ 19.783] (II) No input driver specified, ignoring this device.
[ 19.783] (II) This device may have been added with another device file.
[ 19.783] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event15)
[ 19.783] (II) No input driver specified, ignoring this device.
[ 19.783] (II) This device may have been added with another device file.
[ 19.783] (II) config/udev: Adding input device Microsoft® LifeCam HD-3000 (/dev/input/event21)
[ 19.783] (**) Microsoft® LifeCam HD-3000: Applying InputClass "evdev keyboard catchall"
[ 19.783] (II) Using input driver 'evdev' for 'Microsoft® LifeCam HD-3000'
[ 19.783] (**) Microsoft® LifeCam HD-3000: always reports core events
[ 19.783] (**) evdev: Microsoft® LifeCam HD-3000: Device: "/dev/input/event21"
[ 19.783] (--) evdev: Microsoft® LifeCam HD-3000: Vendor 0x45e Product 0x779
[ 19.783] (--) evdev: Microsoft® LifeCam HD-3000: Found keys
[ 19.783] (II) evdev: Microsoft® LifeCam HD-3000: Configuring as keyboard
[ 19.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb4/4-5/4-5:1.0/input/input21/event21"
[ 19.783] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-3000" (type: KEYBOARD, id 8)
[ 19.783] (**) Option "xkb_rules" "evdev"
[ 19.783] (**) Option "xkb_model" "pc104"
[ 19.783] (**) Option "xkb_layout" "us"
[ 19.784] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 19.784] (II) No input driver specified, ignoring this device.
[ 19.784] (II) This device may have been added with another device file.
[ 19.784] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event11)
[ 19.784] (II) No input driver specified, ignoring this device.
[ 19.784] (II) This device may have been added with another device file.
[ 19.784] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event10)
[ 19.784] (II) No input driver specified, ignoring this device.
[ 19.784] (II) This device may have been added with another device file.
[ 19.784] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event9)
[ 19.784] (II) No input driver specified, ignoring this device.
[ 19.784] (II) This device may have been added with another device file.
[ 19.784] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event8)
[ 19.784] (II) No input driver specified, ignoring this device.
[ 19.784] (II) This device may have been added with another device file.
[ 19.784] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event7)
[ 19.784] (II) No input driver specified, ignoring this device.
[ 19.784] (II) This device may have been added with another device file.
[ 19.785] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event14)
[ 19.785] (II) No input driver specified, ignoring this device.
[ 19.785] (II) This device may have been added with another device file.
[ 19.785] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event13)
[ 19.785] (II) No input driver specified, ignoring this device.
[ 19.785] (II) This device may have been added with another device file.
[ 19.785] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event12)
[ 19.785] (II) No input driver specified, ignoring this device.
[ 19.785] (II) This device may have been added with another device file.
[ 19.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 19.785] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 19.785] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 19.785] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 19.785] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
[ 19.785] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 19.785] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 19.785] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 19.785] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 19.785] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 19.785] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 19.785] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 19.785] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 19.785] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb9/9-1/9-1:1.0/input/input0/event0"
[ 19.785] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 19.785] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 19.785] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 19.785] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 19.785] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 19.785] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 19.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 19.785] (II) No input driver specified, ignoring this device.
[ 19.785] (II) This device may have been added with another device file.
[ 19.786] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event1)
[ 19.786] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.786] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 19.786] (**) Logitech USB Keyboard: always reports core events
[ 19.786] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event1"
[ 19.786] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 19.786] (--) evdev: Logitech USB Keyboard: Found keys
[ 19.786] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 19.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.0/input/input1/event1"
[ 19.786] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 19.786] (**) Option "xkb_rules" "evdev"
[ 19.786] (**) Option "xkb_model" "pc104"
[ 19.786] (**) Option "xkb_layout" "us"
[ 19.786] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event2)
[ 19.786] (**) Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.786] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 19.786] (**) Logitech USB Keyboard: always reports core events
[ 19.786] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event2"
[ 19.786] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc326
[ 19.786] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 19.786] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 19.786] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 19.786] (II) evdev: Logitech USB Keyboard: Forcing relative x/y axes to exist.
[ 19.786] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 19.786] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y axes to exist.
[ 19.786] (--) evdev: Logitech USB Keyboard: Found keys
[ 19.786] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 19.786] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 19.786] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 19.786] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 19.786] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.786] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.1/input/input2/event2"
[ 19.786] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[ 19.786] (**) Option "xkb_rules" "evdev"
[ 19.786] (**) Option "xkb_model" "pc104"
[ 19.786] (**) Option "xkb_layout" "us"
[ 19.786] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 19.786] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 19.786] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 19.787] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 19.787] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 19.787] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 19.787] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 19.787] (II) No input driver specified, ignoring this device.
[ 19.787] (II) This device may have been added with another device file.
[ 23.504] (II) RADEON(0): EDID vendor "GSM", prod id 22746
[ 23.504] (II) RADEON(0): Using EDID range info for horizontal sync
[ 23.504] (II) RADEON(0): Using EDID range info for vertical refresh
[ 23.504] (II) RADEON(0): Printing DDC gathered Modelines:
[ 23.504] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 23.504] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 23.504] (II) RADEON(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 23.504] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.504] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz e)
[ 23.504] (II) RADEON(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 23.504] (II) RADEON(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e) -
Button on slides randomly doesn't work
Hi there, apologies for posting another question but this is quite bewildering.
I have a project that has some slides that have a number of images on them. Each image is a button that executes an advanced action that "opens" a "layer/lightbox" that has relevant information on it (and hides any other that may be open at the time) plus a small "X = close" button in the top right corner that does the reverse. Basically the images open hidden grouped items creating the illusion of layers, etc, and the close button hides each "layer" accordingly. Testing locally everything behaves perfectly and smoothly.
It's only when uploaded to the LMS that the following issue occurs, in that occasionally, for some users the X button in the top of the "layer" doesn't work. The user is kind of stuck... well, not really - other slide buttons like forward and back, plus the master slide menu buttons all work no problem.
The X buttons are smart shapes and at the top of each groups timeline.
When I test and check they can work perfectly on first test but then the problem manifests the next time I check. It may be the third or fourth time, but if I try enough times the glitch occurs.
Something that may be related and is also bugging me is that in order for the information to look clean on the slide each group has a smart shape layer background that is sized to the 'stage area' to block out the underlying information. The shape is white with 100% opacity and no timeline effects or Timing fade, yet when I view it online I can definitely see the "base layer" background seeping through very, very slightly. Like a hint of transparency. Which makes me think that something in these particular slides is corrupt and causing the issues.
Has anyone else witnessed something similar? I did check and this is not a Pause/Continue slide error (AFAIK) but I couldn't find anything about buttons random not working.
Thank you as always for taking time out to read.Hi Lieve. Thank you for the prompt response.
The background shape that is slightly see through is in each (hidden) group on the slide itself. Basically, on one slide I have 9 groups that each have a smart shape as a background (bottom of it's timeline grouping), and the same thing on 3 other slides.
The background shape layer in one of the hidden groups:
The slight transparency issue:
I would provide more comprehensive screengrabs of what I am describing but the image content is quite gruesome (medical) and I wouldn't want anyone get ill on these forums.
I was just reading that Dare To Share link and am really impressed how well you explained the functionality. The original documentation was not so great. I will have to apply Shared Actions to all future Captivate module development.
The action associated with the Close button:
Again, thanks for your assistance. -
CP6: Streaming Video Doesn't Work in HTML5
Apparently, streaming video just doesn't work if you publish to HTML5 from Captivate 6. I have that directly from Adobe tech support.
I have been working with Adobe tech support on this issue, but I want to do a bit of crowd-sourcing and see if anyone in the community has come up with a solution. Has anyone found a solution or workaround for this?
We are publishing courses to HTML5 and SWF, and the courses contain streaming video. The streamed video works PERFECTLY in the SWF version in multiple browsers. The HTML5 vesion just....doesn't. By that I mean that the places where the video is supposed to appear are just blank - no black or white placeholder, no controls but no video - just a whole lot of nothing. The other objects in the published SCO work great, but no video. Again - the failure is ONLY in HTML5. Apparently it has something to do w/ the fact that HTML5 handles video "differently," though I have yet to get an explanation of what that actually means.
We've tried several video formats, but none of them work.
We've tested by publishing to just HTML5 and playing it locally in a browser, and by trying to play it from our LMS and from SCORM Cloud (in various browsers/platforms and on various mobile devices) - none work.
All thoughts and suggestions are appreciated.
LauraThank you, but as I said - I have been working w/ Adobe on this. I received word about the update, immediately asked my contact if the update addressed the HTML5 and streaming issue, and he said no - it did not. I went ahead and tried it, just in case, and indeed it still does not work.
As I understand it, this is not an isolated incident where it doesn't work for me - it's an actual problem with the software. The way that Captivate 6 publishes streaming video is incompatible with the way that HTML5 "understands" video.
I was hoping someone had come up with a good workaround or found a solution independently.
Laura
Maybe you are looking for
-
Brand new iPod touch not showing in iTunes - HELP!!!
It showed when I first got it home, then I updated to iTunes 10.1, and it wouldn't show. Called Apple, they had me put iTunes in the trash (along with some other things) and reinstall it. It showed again, and everything was fine - until I updated to
-
Error: AeInData.cpp-712 and VideoSegmentsImpl.cpp-114
This error occurs both when I try to drag a clip with a speed adjustment applied to it and now randomly when I export to Windows Media Video Premiere Pro Debug Error: [..\..\Src\AESupport\AEInData.cpp-712] I'm also getting the below errors, Premiere
-
Adobe Flash Player and antivirus program
My question is this: always when i download new version of adobe flash player then my antivirus program shows me that there are some threats at this program, why is that so? I do not know why is that so, I'm using avast as antivirus program, but late
-
Object Libraries experiences (Designer 6.0)
I just started using Object Libraries. I would like to know your experineces with them. How are they with accepting PL/SQL program units? Brian Jarner
-
Hi all, I'm spending a lot of time on the web searching for a Font source compatible with the FontBook on Os X 10.4.7. Anybody here can advise me a website where i can find 'em? Bye