LMS Current Release Question

  I been away from LMS since release 3.2.   Am now interested in what has changed since then.
   1) Is LMS now available for Redhat Linux ? 
   2) Is HUM included with an unlimited license for LMS or is HUM still a seperate add-on ?
   3) Is Cisco Prime just LMS repackaged as an applicance ?
Thanks

1. Among the distributions available is a soft appliance which can be loaded onto a VMware ESXi server and runs as a Linux guest OS. It includes the underlying hardened Linux, a variant of the RHEL distro, I believe.
2. The product formerly known as HUM has been incorporated into the Performance aspect of the LMS server.
3. Cisco Prime is the umbrella term for several products. Cisco Prime Infrastructure is the only ordering mechanism for new purchases and includes Prime LMS (4.2) and NCS (1.1). It is available as an installable application server (for Windows or Solaris), a soft appliance (as I mentioned above), or as a hardware appliance with the product pre-installed.

Similar Messages

  • I wnet to a web site tonight and a meeage from FireFox displayed that I was not on the current release. I know which release I'm on and at this time I do not wish to upgrade my release.

    I use release 3.5.1 of FF because it is compatible with the software I use. Nothing worse than you nagging me that I'm not on the most current release. Get off my ******* back. Stop the nagging messages. I'll upgrade when I'm ******* good and ready to upgrade. Un F'n believable!
    ''Edited by a moderator due to language. See the [http://support.mozilla.com/kb/Forum+and+chat+rules+and+guidelines Rules & Guidelines] .''

    The solution is simple. Go to Tools, select Options, a window will pop up. Click Advanced, select Update tab. In the options 'Automatically check updated to', uncheck 'Firefox'. Click Ok, you're done. :)

  • How to get current release code for PO

    Dear ALL,
    We need a FM or method , which can give us current release code for PO.
    We have PO number with us and PO details like Release strategy and release group.
    Please help, if anybody knows the way.
    Regards,
    Nilesh

    Hi,
    check table EKKO you will get details for that  release code 
    and check following link
    [http://www.****************/Tutorials/Workflow/POReleaseStrategy/Details.htm]
    Regards
    Kailas Ugale

  • What is the Current Release of P6?

    What is the most current release of P6? Currently I'm using P6 Release 6.2.1 SP4. I have seen Release 8.2 in some forums as well as a new release mention of 9.1? My company intends to upgrade to the most current release from what we have now (6.2.1 SP4). Are there any issues jumping from 6.2.1 sp4 to 6.8.2 or whatever is the most current? Any insight would be greatly appreciated. Thanks! :)
    Shannon

    You're welcome, Shannon!
    I believe Release 8.2 can only read databases created using 8.0 and above. That is a major flaw if you're trying to connect to a database containing several projects. The only workaround would be to export the projects from the old databse and then import the projects back to the new database.
    By the way, the version as are follows:
    P6 version 6.0, 6.1, 6.2, etc
    P6 version 7.0, 7.1, 7.2 etc
    P6 version 8.0, 8.1, 8.2
    Hope this helps!

  • Help needed to install Flash Player : 'Non-Current Release' problem!

    I been encountering problems while trying to install Flash Player on my laptop running Windows 7.
    Originally Flash Player does not work as I understand it is not supported on 64-bit Internet Explorer.
    After installing 32-bit IE, the following issue of 'non-latest version' arises and all installation were aborted by the application :
    The below were steps I had taken to no success.
    1.  Via the 32-bit browser, downloaded flash player un-install program and did the uninstallation with success.
    2.  Rebooted the laptop.
    3.  Via the 32-bit browser, downloaded the flash player version 10.0.45.2 from http://get.adobe.com/flashplayer.
    4.  After downloading it automatically did the installation with 100% completion.
    5. The program proceeded to activate the flash player with a webpage saying if the flash player is working properly, I should see a video and Flash Player's logo.
    6.  Before anything was displayed, an error message popped up to say I was trying to install a non-current version and that I should go to same webpage to download the latest version. The activation was then aborted.
    Tried many times but always encountered same problem and hence cannot proceed to use the flash player.
    Need assistance to diagnose the problem and to get Flash Player working on my laptop. Appreciate any help to get it working.
    Regards.

    Thanks to efforts of eidnolb and Bob, the installation of flash player into my laptop is now working .
    Bob's installer enabled the download successfully.
    Eidnolb's link in post 6 trigggered me that I may have previously installed the pre-release version 10.1, thereby leading to the 'non-current-version' problem too. Post in that link adviced to uninstall 10.1 using the pre-release uninstaller.
    I suggest others who had encountered this non-current release to uninstall first using that specific uninstaller, before attempting to install the most current release. I may have installed the 10.1 pre-release in desperation after failing numerous times trying to figure out why flash player does not install in browser not knowing its currently-non-support of 64-bit browser.
    Once again thanks for support, eidnolb and Bob.
    Cheers.
    Kelvin

  • How to get CV04N to display only current released revision

    Hello all-
    We need to set our CV04N results return to show only the current released revision as determined by Document Status and Valid From Date.
    Example:
    Document 1234567/BIO/000/00   Status is RL      Valid from date is 01/01/2011
    Document 1234567/BIO/000/01   Status is RL      Valid from date is 01/03/2011
    When CV04N is executed we only want the return display to show Document 1234567/BIO/000/01 because it has the most recent valid from date of 01/03/2011
    We have explored using the layout/filters but Valid From Date does not appear to be an option.
    Help-please.
    Thank you.
    Cindi

    Hai....
    Straight forward in the CV04n screen there is a selection filed
    Document Status
    Date From:   & Date To:
    in that just place date of your selection, you will get the desired output, but you have to maintain the Valid From in the CV01N/CV02N.
    Regards
    KHS

  • Additional PR release step in current release strategy

    Our current PR release strategy is overall release and based on 3 characteristics: doc type, creation indicator and total value of PR. release code is relevant to standard workflow WS20000077 with role resolution using user-exit.  User exit is based on the position of PR creator to navigate HR org structure for assigning manager who has sufficient release authority as workflow approver.
    There is a request for additional release step in case the PR contains item for a particular material group or fixed vendor, then the first release step should be taken by a dedicated position/user.
    I found that it is quite confusing while PR release strategy is overall release but referring PR item level data.  Please advise how to implement the additional release step.  Thanks.

    Hi Arghadip,
    Thanks for your reply.  My intention to create different doc type is for separate set of release strategy.
    In current release strategy, for example, if doc type = NB, creation indicator = manual and the total value of PR is $1K, then the PR requires release code A1 for approval and the approval is align with the company finance policy. The manager (with release authority A1) of the PR creator then selected by the user exit and assigned with workflow task.
    For the request for additional release step, if doc type = ZS, creation indicator = manual and the total value of PR is $1K, then the PR requires release codes AA and A1 (new release strategy).  The user exit will assign a dedicated position/user (not necessary the manager of the PR creator) for release code AA, and then assign the manager of the PR creator for release code A1. Therefore, even the total value of PR is also $1K, but since the PR item contains material group 80501, then the PR require an additional approval on top of the $1K financial approval.
    Your comment is welcome.  Thanks again.

  • 4 ETQ399 ... current release too low ( 2002_1_31I)

    HI,
    I am running an upgrade in modus PREPARE from 4.6C to ECC 6.0 and I get the message that:  current release too low (< 2002_1_31I).
    I downloded the Add-Ons 2002_1_46C (SAPKIND76A).
    I extract it to \usr\sap\trans\EPS and the file is ...\EPS\bin
    I logon to the the system and uploaded it and I see it is installable.
    Problem: When I want to install it the system tells its already installed.
    Why I see it its installable? Why PREPARE ask for it when its installable?
    ADDONCHK.LOG is:
    ................................................................1 ETQ201XEntering upgrade-phase "ADDON_CHK" ("20080915234114")
    2 ETQ367 Connect variables are set for standard instance access
    4 ETQ399 System-nr = '00', GwService = 'sapgw00'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_ora_schema=SAPSR3
    4 ETQ399   auth_shadow_upgrade=0
    4 ETQ399 Range check for Add-on CA-JVA 462 ...
    4 ETQ399 ... current release within range (41B - 462)
    4 ETQ399 ... ==>> OK
    4 ETQ399 Range check for Add-on PI 2001_2_46C ...
    4 ETQ399 ... current release too low (< 2002_1_31I)
    4 ETQ399 ... ==>> TOO LOW
    4 ETQ399 Range check for Add-on SAP_NOTES 46C ...
    4 ETQ399 ... Add-on not ranged
    4 ETQ399 ... ==>> OK
    4 ETQ010 Date & Time: 20080915234114 
    Any Idea?
    Thanks in advance
    HanseAtik

    Hi Markus,
    All I have now is:
    PI                    PI 2001_2_46C  Installation
                            SAPKIPZE41    imported
                            SAPKIPZE42    imported
                            SAPKIPZE43    imported
                            SAPKIPZE44    imported
                            SAPKIPZE45    imported
                            SAPKIPZE46    imported
                            SAPKIPZF41    not imported
                            SAPKIPZF42    not imported
                            SAPKIPZF43    not imported
                            SAPKIPZF44    not imported
                            SAPKIPZG41    not imported
                            SAPKIPZG42    not imported
                            SAPKIPZG43    not imported
                            SAPKIPZG44    not imported
                            SAPKIPZG45    not imported
    And the upgrade says:
    The version 2001_2_46C of  the Add-on PI is too low for this upgrade (< 2002_1_31I).
    You need to upgrade the Add-on first before you can proceed with PREPARE.
    Thanks in advance.
    HanseAtik

  • Current Release Compatibility with Lenovo IdeaPad U300

    Has anyone had the opportunity to use the current release (2011.08.19 at time of writing) on a Lenovo IdeaPad U300? I am thinking about picking one up but want to confirm hardware compatibility before I did so. I looked in the HCL in the Wiki, but didn't see this particular model listed.
    Thank you in advance for your help.

    Understanding that I work for Adobe and I worked on Spry
    features for DW CS3..
    There isn't anything special about working in DW8 with Spry.
    Your widget will render as exploded markup: easy to see content but
    harder to determine layout. But as HTML and CSS, editing should be
    straightforward.
    But I am spoiled by having widget rendering and Spry code
    coloring and hinting in DWCS3 for many months now.
    Widgets render as they do in the browser and you can
    add/remove tabs and switch between them.
    Spry code hinting, esp with the data stuff, is quite fun.
    But, for now, DW8 will do just fine for you.
    Thanks,
    Don

  • How do I change my security questions for my apple ID if I do not remember the answers to my current security questions?

    How do I change my security questions for my apple ID if I do not remember the answers to my current security questions?

    If you have a rescue email address (an alternate email address is different) on your account then you can use that to reset them : http://support.apple.com/en-us/HT6170
    If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will have to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/en-us/HT5699
    If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
    When they've been reset, and if you don't already have a rescue email address, you can then add one for potential future use : http://support.apple.com/en-us/HT201356
    Or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Lightroom 4 (beta and current release) - Issue with Select Catalog screen - catalogs not displaying

    I noticed this during the beta test version of LR4 and was hoping it would be corrected in the actual release (which I installed yesterday).  Here's the issue:
    When the Select Catalog window opens, catalogs will not display unless I click in the empty space in the window (first screenshot)...then they will appear one by one as I start to click (second screenshot) until all are displayed.
    Does anyone have any suggestions??  These catalogs are NOT on a network drive, they are on my desktop machine (Win Vista 64-bit).

    I have the identical problem.
    LR3 worked perfectly. LR4 won't refresh the Catalog screen at startup without me clicking on each entry. Only when an entry is selected will it appear.
    I have an nvidia GeForce 9800GT video card, supporting dual monitors.
    I'm using Vista 64.
    I just upgraded to LR4 64bit, and immediately had this problem.
    I installed the most current video driver (2/12/2012) with no change in problem (or performance).
    I have not noticed any other program having issues, and have not changed any hardware recently.
    I am also noticing that LR4 is visibly slower than LR3, to the point where most sliders don't slide evenly, but jump in increments unless I move VERY slowly.
    I've watched the processor load using resource monitor: it is not peaking over about 65% during slider actvitivity.
    I have an Intel Core2 Quad CPU Q9550 @ 2.83GHz with 8 gb of ram.

  • Credit Release Question

    Dear SAP Experts,
    Currently, our automatic credit control is configured as follow:
    Credit Control --- Reaction ---Block
    1) Sales Order --- C (Warning) --- Y
    2) Delivery ---C ---Y
    3) PGI --- C --- Y
    By default, if credit check fails at SO creation, user can still proceed to save but unable to create the DO. Once released through VKM3, user can proceed all the way to PGI.
    However, if user releases the document and creates the DO, but tries to do PGI only the day after it is released, the user needs to release the document again. Does anybody knows where to configure this so that once released, the user doesn't need to release it again if PGI is done the following day?
    FYI, the Number of Days field under "Released documents are still unchecked" is set to 0 days.
    Your advice is greatly appreciated. Thanks in advance!
    Edited by: eongxien on Feb 11, 2010 10:41 AM
    Edited by: eongxien on Feb 11, 2010 10:42 AM
    Edited by: eongxien on Feb 11, 2010 10:43 AM

    Hi,
    Thought which came to my mind:
    - Check if you have assigned any routine at 'Document controlling -No credit check'
    If the document is not changed then," the Number of Days field under "Released documents are still unchecked" is set to 0 days" is fine.
    Let us know.
    Thanks,
    Vishal

  • AT-AO 10 current output question

    I have an AT-AO-10 that I am using to control a few things, most of which
    is using the voltage output. I am using a unipolar, external source
    setting. However, I can't get my current output to work. A few
    questions: Do I need to use an external voltage source, hooked up to the
    EXTREF and RGROUND channels, as I have with my voltage source signals? I
    know that I must supply a voltage source wired in series with the signal
    that is between 7-40 Volts. But, is this my external source, or do I need
    two of them. Also, the manual that came with the AT-AO-10 is pretty lousy
    in regards to how to wire it. The diagram shows a 250 Ohm load
    (floating). What is this? Is this something that I have to put in there,
    as well? ANd wh
    at does "floating" mean? If this is something that I have
    to provide, does it vary with the size of my external voltage source?
    I have a 15 Volt source hooked up right now, but I am also using a 24 Volt
    source for some other equipment that I can use. Is there an ideal voltage
    source that I should use instead?
    Sorry for the ignorance. I just can't get this to work, and have very
    little background in EE.
    Thanks,
    Harry
    "That government is best which governs least."
    -Adam Smith

    Hello;
    Unfortunately, that task can only be accomplished on E-series boards.
    Regards
    Filipe A.
    Applications Engineer
    National Instruments

  • SMU 4140 current pulse question

    Hello everyone,
    I am seeking any advice or help on how to maintain stable a current pulse when its frequency is increased.
    The equipment:
    Chassis PXIe1078
    Controller PXIe 8115
    SMU: PXIe 4140 (4 channels)
    The problem: I am correctly generating a 7mA - 14mA current pulse up to 20Hz but when I increase the frequency to for example 100Hz, the current signal attenuates to a 10mA - 12mA pulse, and if I keep increasing the frequency the signal becomes a complete mess.
    Questions: How can I manage to stabilize the current pulse to higher frequencies without signal attenuation? Am I following a correct programming strategy from the point of view of the VI's that I am using? or should I use the "Current Pulse VI" of the DC power palette for example?
    The VI: please find attached the VI that generates the current pulse. Try increasing the frequency (by reducing the time parameters in the "Delay" array)  
    Thanks for your kind help,
    Cesar
    Attachments:
    SMU_4140_Current_Pulse.vi ‏34 KB

    Danke fuer deine Antowrt Henrik, (my German is terrible...)
    The current is passing through a 1kOhm resistor that cannot be changed to a lower value. I've checked the SMU 4140 module specs and the voltage range is -10V to 10V and thats low considering the fixed resitor value.
    I might be wrong, but I think I cannot achieve my goal with this SMU module.
    Still, further ideas or advices are greatly appreciated.
    Greetings from Mexico,
    Cesar 

  • Future BWA release Question

    I have heard a couple rumors and was wondering if anyone can confirm them:
    1) future releases will incoroporate DSO's
    2) future release will be able to incorporate data from an External DB - i.e. Oracle and can be used in conjuction with existing BW data
    Mike

    Hello Mike,
    You need one extra blade for BOEA, and this doesn't have to be as same as your other blades. You can purchase a new nehalem G6 blade which has 12, 24 or 48 GB ( 12 or 24 should be more than enough)
    To answer your questions, you cannot join those indexes, you will have two different information spaces.
    1) Is that calling the EDW_SFM_STATUS index directly without a query object or is my query object being saved on my desktop?
    >>> When you create the indexes for EDW_SFM_STATUS, it will be stored in BWA as a snapshot of the time that you created the indexes. So there is no additional query you need to create.  
    2) Can I join data from the 0COOM_C02 index with the EDW_SFM_STATUS index? Is that query object with the join stored onmy desktop?
    >>> You can't join them.
    Also here you have three options to create indexes here; 1) You can create a snapshot index of this multiprovider's data, or 2) you can create regular BWA indexes of the each infoprovider in this multiprovider or 3)you can create a query on top of this MP, and index the results of the query as a snapshot data.
    As you can see options 1 &3 are snapshots, you need to reindex everytime if you need new data. Also for option #1 & 3, there are limitations. You need to run a check to see if you can create index for this MP and query. If the MP has compounded chars that is not stored in one of the part provider , you can't create BWA indexes for this MP. Similar issues in #3, you need to run a check program RSR_QPROV_CHECK to see if the query is eligible for BWA indexes. If you have more than one structures, some hierarchies etc it won't let you create BWA indexes.
    Lastly, even you think that you are creating indexes for only the resultset of your query, it will create indexes for all the masterdata in your query. e.g. your query runs for one customer+one material for one fiscal period, and brings 10 records. When you create the snapshot index of this query, it will create indexes for ALL customers and all materials, not just for this one customer.
    Cheers
    Tansu

Maybe you are looking for