LMS Reporting Complete when communication is lost

The LMS we're using, eLogic, reports a SCORM course as Complete if the communication is lost. This was happening on a regular basis as associates began to use online training for the first time. So we requested that it leave the course as Incomplete so the user could re-open more easily. We've been told that this does not conform to SCORM standards that say if communication is lost that the course be marked as Complete. That makes no logical sense to me. Can anyone explain? Or help me to understand?
Thanks!

I think this really has more to do with how your lesson is sending the status. It's the lesson that, ultimately, should decide if the lesson is complete or not. However, that status is not 'definite' until the LMS.commit function is called. Once that's called, then any data that's been sent back to the LMS is official.
So ideally, your CP lesson should not send a Completed status until the user has finished whatever tasks are required to gain that status (all pages viewed, certain interactions finished, etc)...then when the user exits the lesson, CP sends the Commit and Finish calls and the LMS finalizes that lesson.
It sounds like this LMS is doing some sort of default action where, perhaps, if communication is lost with the lesson or a timeout is reached, it automatically commits the status (which CP should have sent). So first:
1. Is your CP lesson sending the status properly? Is it sending Completed as soon as it opens? That's a common issue... If so, the LMS could be receiving the status correctly, but acting on it incorrectly by commiting that status when it should not be.
2. Is the LMS taking a default action, like setting a status to Completed, when the API communication is lost? Which, I agree, sounds like a bad assumption to make and is doubtfully a SCORM requirement.
HTH
Erik

Similar Messages

LMS not reporting complete for slide views

Hi,
I am trying to get my captivate projects to report competion status as complete to the LMS based on slide views. For testing I have created a very simple two slide Captivate. Both slides have 3 second durations, one caption each and nothing else, so the whole project runs for 6 seconds without any pauses, quizes or interactions of any kind. I have used SCORM cloud to view the SCORM calls being made by the package, and it is not reporting completion to the LMS.
I am using the following settings in reporting:
Any help will be really appreciated. Im about to watch http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775550&loc=en_us to see if that can help. My backup plan is to put an interaction on the last slide but that's going to mess with my quiz results for the projects that do include quizzes (This is also why im reporting Quiz Results and Slide Views).
Note: with these settings, passing a quiz causes the captivate to report completion.
Thanks for any help
Andrew Downes

I'm not sure of this and defer to any contrary/additional replies that may follow...but...
Past versions of CP have required some sort of scored interaction in order for the lesson to properly report via SCORM to the LMS.
If you have a CP lesson without any scored interactions (no 'reporting'), that may be why completion is being recorded to the LMS.
SO try setting up one scored interaction as you suggest.
For CP lessons that do have quizzes, you won't need that separate scored interaction.
You'll also likely want to change you settings to just 'Slide Views Only' if you just want completion reported based on them viewing the whole project, and I suspect Slide View Completion should be 100, not 10...
Let us know how that goes...
Erik

HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????

HELP!! just finished a 20pages report and when trying to create the table of contest I lost EVERYTHING... there is nothing left of my work. WHY????

Hi Peter,
Yes I'am in 5.2, I did mention it right after.
This is wonderful Peter, great advice. I got to have my latest version before I created my table of contents.
In Pages > Menu > File > Revert
and see what you get.
Peter
Thank you so much!!
Have a wonderful day

Notification when report complete

Is there a way in Forms (or Discoverer) to notify a user when an Oracle Form is completed running in Batch mode? Can it notify if a report fails?
Can you setup notification during the scheduling of the report?

DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('report4');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
copy_report_object_output(v_rep,'d:\temp\local.pdf');
host('netscape d:\temp\local.pdf');
else
message('Error when running report.');
end if;
END;

Report "completed with warning "   APP-FND-00500: AFPPRN received a return

hi ,
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='200'
P_PO_NO_FROM='9068'
P_PO_NO_TO='9068'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 6098208
Number of copies : 1
Printer : wkwcomm
wkwcomm: service-unavailable
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.

Please post the details of the application release, database version and OS.
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
Is the issue with this report only?
Is this output from the printer that the report complete successfully with warning?
Do you get an output file?
wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

Report Completion date and Report start date in BI Publisher

Guys
We have a requirement to get the Report Completion date and start date without Scheduling the report. Can any one give me an idea to get in the BIP Reports
Regards

What is the requirement ?
When the user run report from BIP EE, you want to display how long the report run ?
or
Where you want to display these info >?
If you expecting these info, on click of viewbutton then i dont think it is possible, unless you write the query to fetch the time and in the template processing, subtract that from the current sys-time to get the time it took to run.
if you can schedule then
Simplest would be is , taking these info from the tables, directly for the report you are running.
or
use Public WS provided by BIP to get the report info
but in order to get these, first of all the reports should be run in scheduled mode.
if you don't want the report to be scheduled then, i don't think, you can get these kind of report completion status info.
otherwise , you can run the query by yourself to get the data and the time it took to complete from database and do some sort of custom calculation by urself

Oracle XML Report Completes in Warning

Hi,
I have a report which has a column called Days Left which needs to be highlighted if the Days Left value is 3 or less than 3.
I have written the following code.
<?if:DAYS_LEFT<=3?><?if:CLOSE_FLAG='N'?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?><?end if?>
But the report completes in Warning and gives no output.
Then I modified the code to :
<?if:DAYS_LEFT<='3'?><?if:CLOSE_FLAG='N'?><xsl:attribute xdofo:ctx="block" name="background-color">red</xsl:attribute><?end if?><?end if?>
then the report completes in Normal and gives output, but the Days Left are highlighted for Days Left values more than 3 also..
Please help me resolve this as soon as possible.
We have UAT lined up next week :(
Thanks
Abhilash

Hi All,
I tried to preview using Template Viewer and its giving me this error when Days_left = 3
[041813_093808967][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
<Line 68, Column 92>: XML-22036: (Error) Cannot convert to number.
[041813_093808967][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=247MB, total=66MB, free=22MB
End of Process.
Time: 0.172 sec.
FO Formatting failed.
Please help :(
Thanks
Abhilash

Run java code on report completion

I understand that Business Objects allows for custom notifications when a scheduled report is completed successfully. Is there a way in Java to be notified when a report is successfully completed? I want to run some code upon report completion. Thanks.

When you create a schedule event, you can decide if the event will be triggered when the report succeeds, fails, or both.
You can then set it up so that each time the event is triggered, a java app that has been published to enterprise is run. The difficulty here is that you will probably want to know exactly "which" report has completed succcesfully (Unless you set up a seperate event for each report) - and I don't know of any way to do that reliably.
But if you just want some java code to run each time a report is completed, then you can use this method.
So the steps would be:
1. Create Schedule Event
2. When you schedule the report - assign the event to it (You won't be able to do this in the CMC - you need to use either custom code or Infoview)
3. Publish your java code to Enterprise
4. Schedule your java code to run, and set the events to wait for to the event you assigned in Step 2
a programmer learning programming from perl is like a chemisty student learning the definition of "exothermic" with dynamite

Financial Reporting Error when creating grid/connecting to database

Hi,
This is new installation of EMP 11.1.1.2 and we are having issues with FR studio. We can open the studio and create a new report, but when trying to insert a grid we get following error:
"DatasourceIDLogin.LoadDatasourceNames Error: -2147467259 Error Loading DatasourceList to Repository" from which I cannot get out, I have to shut down FR Studio.
The only entry in the host file on the client machine I have is for localhost. If I try to add FR server host I get following error:
"You are not authorized to use this functionality. Contact your administrator"
Any help i.e. if I need to perform any configuration tasks on the client machine, changes in host files, changes on servers, etc will be very appreciated.
Thank you.

Hi,
Does this prob occur in specific environment or all the three?
You need to make sure that your print server,web server and report server are configured properly.
Try to ping each of them and if still the problem persists make an entry in your host file of these servers with their complete names.
Thanks.

A question about report completion in production order

Hi,
Rightnow, i am trying to develop some application about production order and play with the production order in SAP. I found a issue which I don't understand. Let's say I have a production order with some components issued for the BOM and these components are managered by serial number. Natually, when I issue components into this production order SAP asks me to select serial number. But when I report completion for some products, SAP doesn't ask me to select component's serial number. Also when I try to return left components from production order to warehouse, SAP ask me to select the component's serial but the serial # list is the complete list which doesn't make sense. Because I have already report some products completed, how comes it ask me to select serial # from all of them? So seems that SAP doesn't manager the serial number properly in production oder, something wrong either I miss some steps in SAP or SAP missing something to manager the serial # for production order.
Any idea?
Thanks,
Lan
Edited by: ZHANGLAN on Jan 13, 2012 8:56 PM

Hi Gordon,
Thanks for your reply. If so, I think we have to use add-on with UDF or UDO to find a solution.
BTW, I will ask another question in a new thread.
Thanks,
Lan

How can i reset my ipad when i have lost the code

how can i reset my ipad when i have lost the 4 didgit/number pass code

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary", then attempt to approve TimeSheet.

Kind day, colleague.
It was required to organize a statement chain for TimeSheet of employees, as we realized. Everything is good, but at linear managers in PSW opportunity to execute Approve when viewing TimeSheet of the employee remained, and in attempt to approve TimeSheet there
is a mistake.
500 Internal Server Error
"An error occurred when communicating with the server. Check connectivity with your administrator to determine whether further action is necessary. "
Accept, is carried out as it is necessary.
It is a bug or we not correctly realized approval chain?

issue is related to the user booking time against a task that was past the finish/end date listed in the Project Schedule.
To resolve the user needs to submit their time on a valid task that is still within the current reporting timeframe, or have the Project Manager
update the task in questions so that the finish/end dates are at or beyond the submission period and then republish the project. After that, the user should be able to go in and submit their timesheet with success.
http://patrickdrews.com/2012/09/project-server-2010-timesheet-submission-produces-an-error-occurred-while-communicating-with-the-server/
kirtesh

Alv show in report but when see in spool (after run background job) there i

my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln1
         IMPORTING
              OUTPUT = t_anla-anln1.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
         EXPORTING
              INPUT = t_anla-anln2
         IMPORTING
              OUTPUT = t_anla-anln2.
check record is correct or not
    select single bukrs anln1 anln2 zugdt
    into w_output
    from anla
    where bukrs = t_anla-bukrs and
    anln1 = t_anla-anln1 and
    anln2 = t_anla-anln2
   zugdt = '00000000'
if record is correct
    if sy-subrc = 0 and w_output-zugdt = '00000000'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Yes : this asset can delete'.
      append w_output to t_output.
if record is not correct
    elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset have value already'.
      append w_output to t_output.
    else.
there is error record this asset donot exist in table anla
      v_have_error = 'X'.
      w_output-bukrs = t_anla-bukrs.
      w_output-anln1 = t_anla-anln1.
      w_output-anln2 = t_anla-anln2.
      w_output-result = 'Error : this asset doest not exist'.
      append w_output to t_output.
    endif.
*end of check record is correct or not
    clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*&      Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
      LT_EVENTS TYPE SLIS_T_EVENT,
      LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM = LV_REPID
            IT_FIELDCAT        = LT_FIELD_CAT
            I_SAVE             = 'A'
            IT_EVENTS          = LT_EVENTS[]
       TABLES
            T_OUTTAB           = t_output
       EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
IF SY-SUBRC NE 0.
    WRITE: / 'Return Code : ', SY-SUBRC,
      'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*&      Form alv_define_field_cat
      text
     -->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
    LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
    CLEAR WA_FIELDCAT.
    ADD 1 TO LV_COL_POS.
    WA_FIELDCAT-FIELDNAME = &1.
    WA_FIELDCAT-REF_TABNAME = &2.
    WA_FIELDCAT-COL_POS = LV_COL_POS.
    WA_FIELDCAT-KEY = &3.
    WA_FIELDCAT-NO_OUT = &4.
    WA_FIELDCAT-REF_FIELDNAME = &5.
    WA_FIELDCAT-DDICTXT = 'M'.
    IF NOT &6 IS INITIAL.
      WA_FIELDCAT-SELTEXT_L = &6.
      WA_FIELDCAT-SELTEXT_M = &6.
      WA_FIELDCAT-SELTEXT_S = &6.
    ENDIF.
    WA_FIELDCAT-DO_SUM = &7.
    WA_FIELDCAT-OUTPUTLEN = &8.
    APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA'     'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA'     'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA'     'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT'   'T5EAE'     'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' ''     'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM.                    " alv_define_field_cat

Hi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program = lv_repid
        it_fieldcat        = lt_field_cat
        i_save             = 'A'
        it_events          = lt_events[]
      TABLES
        t_outtab           = t_output
      EXCEPTIONS
        program_error      = 1
        OTHERS             = 2.
ENDIF.
IF sy-subrc NE 0.
    WRITE: / 'Return Code : ', sy-subrc,
    'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM.                    "display_report_ALV

HT4623 How do I find my emei number in iTunes when I've lost my phone

How do I find my emei number in iTunes when I've lost my phone

Hold down the Control key and choose iTunes > About iTunes (Mac) or Help > About iTunes (Windows).
Release the Control key.
As the iTunes and QuickTime version information scrolls, you will see the serial number and IMEI/MEID of the last-connected devices.
hope it works!

LMS Reporting Complete when communication is lost

Similar Messages

Maybe you are looking for