A question about report completion in production order

Hi,
Rightnow, i am trying to develop some application about production order and play with the production order in SAP. I found a issue which I don't understand. Let's say I have a production order with some components issued for the BOM and these components are managered by serial number. Natually, when I issue components into this production order SAP asks me to select serial number. But when I report completion for some products, SAP doesn't ask me to select component's serial number. Also when I try to return left components from production order to warehouse, SAP ask me to select the component's serial but the serial # list is the complete list which doesn't make sense. Because I have already report some products completed, how comes it ask me to select serial # from all of them? So seems that SAP doesn't manager the serial number properly in production oder, something wrong either I miss some steps in SAP or SAP missing something to manager the serial # for production order.
Any idea?
Thanks,
Lan
Edited by: ZHANGLAN on Jan 13, 2012 8:56 PM

Hi Gordon,
Thanks for your reply. If so, I think we have to use add-on with UDF or UDO to find a solution.
BTW, I will ask another question in a new thread.
Thanks,
Lan

Similar Messages

  • Report to delet production orders

    Hi guys,
    help needed!
    Does anybody of you know a report to delete production orders completely?
    Such on as the RMMMDE00, which deletes all material of the current client.
    Hoping for an answer,
    Barbara

    Hi,
      I guess the below link will help you to some extent....
    http://www.sap-img.com/production/how-to-delete-old-production-orders.htm

  • Bapi to complete the Production Order completely

    Hi All,
    I am using the above Bapi to complete the Production Order completely. Now my requirement is to complete technically. I don't want to write BDC. Can anybody please let me if there is any FM to meet this requirement.
    Thanks n Regards

    used BDC

  • FI Report against to Production order

    Dear all,
    Is thr any report FI reports againest to Production order?
    Thanks in advance
    Regards
    raj.

    Hi
    Also refer  KKBC_ORD , KKBC_ HOE
    Regards
    Dev

  • Serial number creation at the completion of production order

    I am trying to create a production order and the finished goods is serialized. However, when I complete the production order it never asks me for a serial number for the finished goods. I have to go to registered products screen and manually create the serial number. I am assuming there is a way to minimize the number of step I have to use during the production process to create a serial number.
    Any Ideas?
    Thank you
    Chintan

    Hi Chintan,
    i believe that serial numbers are not supported in production orders.
    Serial numbers are available on delivering and receiving goods
    Regards
    Andreas Czech

  • Question about reports layout

    Hi ,
    I have a quick question about report Layout.
    I have created a report in 6i. Now if I want to change my
    select statement and add new table to select from , it just
    restructures my report layout again and set that to Default One.
    Is there any way where I can set my Own layout as Default for
    that particular Report ?
    I would really appreciate any feedback.
    Thanks
    Vidya

    Try to give it alias names to the columns . Then when you
    change the table your are selecting from . The layout should
    not change.

  • Questions about your new HP Products? HP Expert Day: January 14th, 2015

    Thank you for coming to Expert Day! The event has now concluded.
    To find out about future events, please visit this page.
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
     We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
     If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
    So, what is HP Expert Day?
    Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
    Ok, how do I get started?
    It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
    We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
    What if I need more information?
    For more information and a complete schedule of previous events, check out this post on the forums.
    Is Expert Day an English-only event?
    No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
    Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
    Korean Forum: January 15th 10am to 6pm Korea Time
    Simplified Chinese Forum: January 15th 10am to 6pm China Time
    Looking forward to seeing you on January 14th!
    I am an HP employee.

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • About the variance of production order difference.

    hi all
    now i am practicing producting. i have closed the production order by technocially completed.and the variance  (difference between standard cost and actual cost) will be settled to production order difference account through our customization.
    when we are doing the delivery and billing, it is taking the standard price. but that variance is cost of this Finished product,but it is not including when we are doing delivery and billing. the variance is shows in P&L debit as a expenses.
    When the SD people defien the sales price in "PR00", do they consider this variance also?
    please let me know about this. can u give me the complete details.

    Hi
    I suspect based on the price control 'S' maintained for FG, the billing would happen at this standard price. Any variance in production would be settled to a separate variance account and would be available for analysis, based on which you could alter the standard price for the following period
    Thank You,

  • Report for Settled production orders

    Hi All,
    Is there a report I can use to show that these production orders are settled and these production orders need settlement. any clue on this. and when I ran the settlement does it chnages the production order status to reflect that it is settled ?
    Thanks
    MKR

    Hi MKR,
    Please go to COOIS,
    Give the plant and give the status of the order that u want to ge the list.
    then execute.
    System will give you all the production Orders which are having the particular status.
    Hope this will answer your query
    Best Regards
    Surya

  • CN41N and S_ALR_87013533 report not showing Production order planned cost

    Hi Experts,
    I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
    1. CN41N repoet does not show individual material cost planned in BOM.
    2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
    Example :
    1. CN41N report :
    Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
    2. S_ALR_87013533
    This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
    Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
    Thanks in advance.
    Ashish

    Hi Ashish,
    I doubt whether Item level reporting  in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
    Please check the following links:
    https://scn.sap.com/thread/1743833
    (In the above thread,focus on  Mr. Mohamed Rafi comment.)
    http://scn.sap.com/thread/3530080
    http://scn.sap.com/thread/1311820
    Order cost plan in report CN41N
    Display of plan cost., CN41N | ABAP, SAP, benX AG, benXBrain,&…
    Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
    Regards
    Saurabh

  • Report to view Production order wise atcual cost when PO is assigned to PCC

    Hi All,
    Can anyone help me to get the report for production order wise actual cost incurred when that Production order is assigned to PCC (Product cost collector).
    Is it possible through Summarization hierarchy or Product drilldown?
    If yes, can u explain the steps.
    Regards,
    Durga.

    Hi Bhaskar
    You are in Alaska and you wanna eat vegetarian food
    You cant get values at Prod order level if you have chosen PCC as cost object.... You will only get Qty at Prod order level
    To get a bird's eye view of costs incurred in PCC, execute report MCRY with PCC as the input...  MCRX shows only Qty info for components
    br, Ajay M

  • XL Reporter - Prompting for Production Order Number - How to?

    I have watched the FlashBook's for creating reprots, and following the directions. When I go to create a new Paramater, the Document Number is not an available Dimension.
    Can anyone point me in the right direction in setting up an XL Reporter report that prompts for Production Order number / Document ID? How do you create prompts for record ID's?
    Thanks.
    Mike
    Edited by: Mike White on Jun 16, 2008 11:11 PM

    Thank you for the help. This gets me closer then I was before.
    To test, I am list listing the Production Order Document Number and the Due Date. Looking to list only the Production Order and Due Date from a prompted Production Order.
    I tried both Cell Expansion and Row Expansion using the parameter you suggested. Cell Expansion returns all documents, but with a document number of 0. Row expansion gives me an error.
    I have captured all the screen shots and posted them to the web. If you wouldnt mind taking a quick look. I am sure something I am doing is off, but feel I am close with your help.
    http://www.level8systems.com/xlerror.jpg
    Thank you.
    Mike

  • Question about reports in sap fs-cd

    Dear all,
    I have got a question about SAP FS-CD (collection and disbursement)
    If I make changes to the master data (FPP2) is there a way to view the changes I have made in a report.
    It is possible to view the changes via tables but I was wondering if there is a standard transcation code in SAP-CD to view the changes
    Thanks

    You can find it in Information system from easy menu
    under this check for masters, you can find a report.
    Rgds
    Murali. N

  • Questions about reports

    Hi experts, pls help advise. Thx.
    Q1: Any chance to add the selection criteria "order creator" into the report (T code VL04)?
    Q2: Any chance to change the layout of the report (T code VL04), i.e. add "sold to party", "sales order no.", creation date for sales order", & "undelivered qty:?
    Q3: If it's hard to solve the questions above, any other reports can capture sales orders which are due for delivery?
    Q4: Which report can show the detail status of sales orders, e.g. open qty, delivered qty, undelivered qty?
    Q5: How to save the layout of the report (T code VA05) which is customized by end-users?
    Q6: What settings are required to perform collective delivery, i.e. create one delivery from several sales orders? I have tried it but failed, even same customer, same shippping condition, same delivery date, same shipping point.

    Dear Cathy,
    Q3: If it's hard to solve the questions above, any other reports can capture sales orders which are due for delivery?
    T. Code: VL10C
    Q4: Which report can show the detail status of sales orders, e.g. open qty, delivered qty, undelivered qty?
    I don't think, there is any single Standard Report for above said purpose.
    You may, look in to different reports:
    VL10C - Delivery Due (Sales Order-wise)
    VL06O - Delivered (You may fetch the Report, based upon Sales Order - Enter Range for S. Order, under Tab: Doc. Data, and then execute the Report)
    VA05 - Open Sales Order
    To view, all details in to single report, customization required.
    Alternatively, save output in "Excel" and use "VLOOKUP" to combined the result, from above reports
    Q6: What settings are required to perform collective delivery, i.e. create one delivery from several sales orders? I have tried it but failed, even same customer, same shippping condition, same delivery date, same shipping point.
    Basic requirement for Collective Delivery:
    Ship To Party
    Inco Terms
    Confirmed quantity date at schedule line level
    Delivery priority
    Shipping Point
    Above-data must be same in all Sales Orders.
    Also routine "051" will allow you to combine only if billing document types are also same. So try with 101 in Field: Order Combination, within T. Code: VTLA, for your item category.
    Try with T. code: VL01N/ VL10A/ VL10B, to create Delivery.
    If WM is assigned then a transfer order has to be created to do delivery using LT03 and once you create transfer order then you can do PGI.or you can confirm the transfer order using LT12
    Best Regards,
    Amit

  • PP scenario to complete the production order without GR and No stock update

    Hi Experts,
    I have a very typical PP scenario here. Let me explain,
    I want to create a production order (CO01) add operations to it and do the confirmation. As set, the cost will get updated against the production order. This is perfect.
    Now the trick is, i actually DONT want to update the stock of the material. That is, the goods reciept should not happen. But at the same time, I need to have the count of how much is delivered in the production order.
    I was thinking of having new movement type created (that would statiscally do the goods reciept without updating the actual stock of the material). Would this suffice, or do you guys have any other way of getting the count in the production order without having the goods reciept done.
    Thanks for your early reply.
    Beatle

    Dear ,
    If you want to avoid inventory issues as well as cost issue , i think  you can bring the Confirmation -Yeild field as Delevered quianity in a Z-report  .You can also utilise COOIS-Select Confirmation -Standrad Profile -Enter Order Type and Plant Code .Here you can select the change lay out option and bring the  confirm yeild qty  field from Hidden column  to diplay colmn for all these  orders .
    You can use following tabel  for your custom report or utlise coois for the same
    1.AFRU -Confiramtion
    2.GMNGA-Yeild Confirmed
    3.LMNGA-Yeild to confirm .
    Regards
    JH

Maybe you are looking for