Ln command not found causing Silverlight installation failure

Hi, I have been working on fixing my silverlight installation for last couple of days. From the verbose in /var/log/install.log, it seems to be failing in the last line of the install code where it tries to create a symbolic link (ln -s)
Not sure what happened, but i am unable to locate ln command in my terminal.
My path is set correctly
bash-3.2$ echo $PATH
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
How do i re-install ln ? I downloaded xcode as well as the command line tools, unfortunately "ln" is NOT part of it.

Triple-click anywhere in the line below to select it:
codesign -vv /bin/ln | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Similar Messages

[SOLVED] "ip: command not found" after power failure

Hello,
After a power failure my Arch box has no network connection available. An 'ip addr' command showed me the outrageous error message :
bash: ip: command not found
How could this ever happen ? How do I recover from such an error ?
Last edited by singleton (2014-12-19 17:34:58)

I wasn't doing any system maintenance when the power failed, just some regular browsing.
Here's the output of each command :
pacman -Qk
https://bpaste.net/show/e06fb962c42c
echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
ls -l /usr/bin/ip
ls: cannot access /usr/bin/ip: No such file or directory
pacman -Qi iproute2
error: package 'iproute2' was not found
I 'm suspecting I will need to use a fresh installation CD to get over this. Any guidance will be greatly appreciated though!

[SOLVED] 'sh: nano: command not found' on installation in arch-chroot

Hello,
I'm trying to install Arch Linux on a new laptop with a UEFI motherboard, however while following the beginners' guide on the step which requires you to arch-chroot into the /mnt base system to modify the locale.gen file using nano, I receive the following error:
'sh: nano: command not found'
I have mounted the partitions, installed the base system and have tried searching online for a solution but nothing seems to work. Also, nano works while outside of arch-root so I believe it is installed on my system.
I'm almost completely out of ideas on how to fix this, so any help or a point in the right direction would be greatly appreciated.
- Thanks.
Last edited by tyor (2013-01-20 12:01:54)

I had the same problem during my first attempts to install Arch. When you use the command as stated:
# pacstrap -i /mnt base base-devel
it seems not all packages were downloaded/installed. Now I know it was my own fault by not selecting the packages properly.
In the beginnersguide right above the pacstrap command is stated:
The -i switch can be omitted if you wish to install every package from the base and base-devel groups without prompting.
So I did, and installed without a problem

When trying to start InDesign CS6 Server: command not found

Greetings,
I just installed InDesign CS6 Server, but when trying to run the application from terminal I get the following error: -bash: InDesignServer: command not found
I thought, maybe it had something to do with the licensing so I ran this command:
MacBook-Pro-van-Mario:~ mariovandeneynde$ cd /Applications/Utilities/Adobe\ Application\ Manager/Enterprise/utilities/APTEE/CS6
MacBook-Pro-van-Mario:CS6 mariovandeneynde$ ./adobe_prtk --tool=StartTrial --leid=InDesignServer-CS6-Mac-GM
RESULT:
Copyright 2012 Adobe Systems Incorporated
All rights reserved.
StartTrial Successful
Return Code = 0
So, I tried to launch IDS again, but always the same error.
Now, my mac isn't a MAC Server, as mentioned in the Tech Specs, but I don't think that should mind, cause the installation was successful.
So, anybody got any ideas what I'm doing wrong?
Thanks!
Mario

Got it to work eventually.
I was calling "InDesignServer -port 12345"
But I had to call the indesignserver.command application instead. That did the trick!
Thanks!
M.

Gcc: command not found problem

Hi,
i just full installed cygwin 1.5.5-1 'cause i need to comiple and build a dll so i need to use gcc but in response to this command:
gcc helloworld.cpp
i get:
bash: gcc: command not found
Is that a windows xp problem or do i have to somehow configure cygwin? I read all the manuals i found but couldn't help.
Best regards
Nereida

Depending on the way you install cygwin, the start for setup.exe is different.
I will explain the way starting from web:
http://www.cygwin.com/setup.exe
You have to choose
1) Install from Internet
2) your directory for cygwin like: "D:\Programme\cygwin"
and the install for all or just for you
3) choose a local package directory like "D:\Programme\cygwin"
4) choose the settings to access the web like "Use IE5 Settings"
5) choose the nearest you download server
!!! and now the interesting Selection starts: !!!
A tree of packages is listed you have to click at 6. line (+Devel) at the word Default
+Devel # Default
Default should changed to:
+Devel # Install
...this is already your developer-pack within gcc
but further you have to go to Libs (line 12) and now click to the '+' -sign:
+ Libs # Default
The lib tree should now opened.
go up to the 5. last line at the 6. column "Package" you should read w32api: Win32 API header and library ...
look back to column 3 "New" there stands Skip click on it [as long] that you see the version number (2.5-1) or any better
It should help but it is not necessary to click on
+ Doc # Default (line 7)
so that it changes to
+ Doc # Install.
so now you can finish your installation!
I hope it helps
mike

/bin/sh: g++32: command not found

Chanage:
Migration EBS 11.5.10.2 from RHEL4.x x86-32bit to RHEL 5.3 x86-64bit (appsTier)
$adrelink_mod.sh force=y "msc MSCCPP"
/test/testclone/testap/testora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork
-lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3
-lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon
-lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient
-lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3
`cat /test/testclone/testap/testora/8.0.6/lib/sysliblist` -ldl -lpthread -lm
/test/testclone/testap/testora/8.0.6/rdbms/lib/defopt.o
/test/testclone/testap/testora/8.0.6/rdbms/lib/ssbbded.o
/usr/lib/libstdc++-2-libc6.1-1-2.9.0.so
/bin/sh: g++32: command not found
make: *** [test/testclone/testap/testappl/msc/11.5.0/bin/MSCCPP] Error 127
Done with link of msc executable 'MSCCPP' on Mon Aug 9 08:45:59 CST 2010
Relink of module "MSCCPP" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /test/testclone/testap/testappl/msc/11.5.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'msc' on Mon Aug 9 08:45:59 CST 2010
Relinking of modules ENCACN, MSCCPP, MSCMON, MSCNEW, MSCNSP,
MSCPCL, MSCPDW, MSCPRG, MSCSDW, MSCSLD, MSCXGCAL, MSONEW, and
WPCFSQ produces multiple undefine symbol errors.
Edited by: user8019167 on 2010-8-9 下午9:57
Edited by: user8019167 on 2010-8-9 下午9:57

Hi,
Chanage:
Migration EBS 11.5.10.2 from RHEL4.x x86-32bit to RHEL 5.3 x86-64bit (appsTier)Oracle Apps 11i is not certified on x86-64 for the application tier, only the database tier node is certified on a 64-bit OS (Split Configuration).
Note: 343917.1 - Frequently Asked Questions: Oracle E-Business Suite Support on x86-64, 3. Is Oracle E-Business Suite supported on x86-64?
Note: 357098.1 - Installation of E-Business Suite on Linux x86-64
Thanks,
Hussein

Installing mysql:sudo launchctl: command not found

After several days of reading about:
Installation of MySQL
Enabling apache server
And getting phpMyAdmin up
I have run into an obstacle. See error message below **
I am Running:
'Mountain lion' , 'Mac OS X 10.8.3'
I have downloaded:
MySQL version. Mac OS X 10.7. (X86, 64-bit), DMG Archive.
Within this forum I found a very brief but helpful 'user tip' post.
Link1.
https://discussions.apple.com/docs/DOC-3082
Where this sentence lead me to believe I could use the version listed above.
There is NO version for 10.8
" Download MySQL from a local mirror. You want the Mac OS X ver. 10.6 (x86, 64-bit), DMG Archive. At the time of writing this User Tip, the current version is 5.5.34. By the time you read this, there may be a newer version to use instead. Open the archive mysql-5.5.34-osx10.6-x86_64.dmg. "
Following the instructions on link1, and all went well until
I am getting this error message when I type the following command at the terminal prompt:
**Error message
-bash: launchctl: command not found.
1. I cd - changed directories all the way back up the file structure to type the command
to see if it needed to be run someplace special but the same error came up.
2. I searched here on this forum and on the web.
3. I went back and checked over every step and everything that i typed.
4. I ended up typing the instructions below by hand
because somewhere I read that a copy/paste may insert invisible characters.
Excerpt from link1.
sudo vi /Library/LaunchDaemons/com.mysql.mysql.plist
Use the following content:
<plist version="1.0">
<dict>
    <key>KeepAlive</key>
    <true/>
    <key>Label</key>
    <string>com.mysql.mysqld</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/mysql/bin/mysqld_safe</string>
    <string>--user=mysql</string>
    </array>
</dict>
</plist>
Can someone please explain what I am missing ?
Why is this command
-bash: launchctl: command not found.
That is launch c t lowercase L not number 1
An added note.
The following link also had a very nice set of instructions but unlike link1, this link uses the
'Preference pane' and 'startup item' which link1 discourages because it causes problems down the road.
I would rather use the command line and do not want to give up on this method.
Link2.
http://coolestguidesontheplanet.com/install-configure-apache-mysql-php-phpmyadmi n-osx-10-8-mountain-lion/
Now that I am going head strong with this project, I hope that my issue can be resolved quickly with this community
so I don't loose my momentum.
Thanks a lot.

1. You are really a nice person. Thank you. I really want to understand these file structures. Sorry my posts are lengthy.
Thank you for taking the time to look at the original User Tip.
2. I hope that you do not end this thread when I tell you that I actually have gotten php running. These concepts are still very important to me.
I am not up to the point where I am using mySQL so that may end up another troubleshooting problem.
3. Last week and this I have been exploring my files with terminal by cd-ing up and down; using sudo nano to open the file to see what is in there.
I have included some things that may be useful since you have a much better idea about how these paths work.
4. If you have a chance - Can you elaborate. I understand a PATH. What to you mean when you say PATH environmental variable.
I think of a variable in the computer programmer syntax sense.
5. I also cannot find a .profile file anywhere. See the below.... where I found something....
4. Searching like crazy for the load executable. I cannot find it yet. I thought that it might be with the other commands in /bin
below are some exploratory commands I am running and things I find of interest.
I use ls -la to display 'all' files. I use -la to list hidden files. those that start with a dotFileName.
/user/local/mysql/bin
there is NO load executable here.
I looked around for 'load'
macBookPro: /shortname$ ls
cd bin
ls -la
lots of commands: launchctl mkdir pwd echo ....   i thought that 'load' should live here.
cd etc
ls -la
has:apache2 my.conf named.conf passwd paths php.ini sudoes nanorc
apache2 empty - title: new buffer
sudoers i have questions about this but not a priority now.
nanorc
php.ini
my.conf
name.conf
passwd
paths
sudo nano paths
/usr/bin
/bin
/usr/sbin
/sbin
/usr/local/bin
I did not find the .profile file. what I have found is the below which references the .profile for sh(1)
I am unable to interpret the below file/code - well maybe a little.
cd etc
ls -la
sudo nano profile
# System-wide .profile for sh(1)
if [ -x /usr/libexec/path_helper ]; then
        eval `/usr/libexec/path_helper -s`
fi
if [ "${BASH-no}" != "no" ]; then
        [ -r /etc/bashrc ] && . /etc/bashrc
fi
Here is
/usr/sbin
sudo nano apachectl
the following is the code in apachectl
I see 'run launchctl load ....'
LAUNCHCTL="/bin/launchctl"
LAUNCHD_JOB="/System/Library/LaunchDaemons/org.apache.httpd.plist"
run_launchctl() {
    if [ $UID != 0 ]; then
        echo This operation requires root.
        exit 1
    fi
    $LAUNCHCTL $@
# Set the maximum number of file descriptors allowed per child process.
if [ "x$ULIMIT_MAX_FILES" != "x" ] ; then
    $ULIMIT_MAX_FILES
fi
ERROR=0
if [ "x$ARGV" = "x" ] ; then
    ARGV="-h"
fi
case $ARGV in
start)
    run_launchctl load -w $LAUNCHD_JOB
    ERROR=$?
stop|graceful-stop)
    run_launchctl unload -w $LAUNCHD_JOB
    ERROR=$?
restart|graceful)
    run_launchctl unload -w $LAUNCHD_JOB 2> /dev/null
    run_launchctl load -w $LAUNCHD_JOB
    ERROR=$?
startssl|sslstart|start-SSL)
    echo The startssl option is no longer supported.
    echo Please edit httpd.conf to include the SSL configuration settings
    echo and then use "apachectl start".
    ERROR=2
configtest)
    $HTTPD -t
    ERROR=$?
status|fullstatus)
    echo Go to $STATUSURL in the web browser of your choice.
    echo Note that mod_status must be enabled for this to work.
    $HTTPD $ARGV
    ERROR=$?
esac
exit $ERROR
Thanks again for helping me to understand these file structure.
There is no preview option so i hope this posts well.

[SOLVED] node package manager: command not found

I installed nodejs, and it was working fine. I updated a couple of days ago, and now npm install and npm lead to
zsh: command not found
Node has some naming conflicts, from what I have read. I am confused as to how the namespace for packages works, but hopefully someone can point me in the right direction with this because, while confusing, I don't think it is causing the problem. I usually execute the application as node, but it is in the repositories as nodejs. I found node in /usr/bin. I can execute npm there, but it advises that npm should be run in a normal shell with a different directory, not in /usr/bin. There was no nodejs or npm.
I removed nodejs using
pacman -Rdd nodejs
since adom has dependencies, but when I tried to reinstall using
pacman -S nodejs
, it said it was up to date and reinstalled. I updated my system and rebooted. I still can execute node but not the npm-it still returns
zsh: command not found: npm
I have no idea why the node package manager disappearred. I also have no idea why it would not have reinstalled with nodejs from the repo.
➜ ~ sudo pacman -Rdd node
[sudo] password for user:
error: target not found: node
➜ ~ nodejs npm
zsh: command not found: nodejs
➜ ~ node npm
module.js:338
throw err;
^
Error: Cannot find module '/home/user/npm'
at Function.Module._resolveFilename (module.js:336:15)
at Function.Module._load (module.js:278:25)
at Function.Module.runMain (module.js:501:10)
at startup (node.js:129:16)
at node.js:814:3
Last edited by 01010101 (2015-06-17 17:40:33)

➜ ~ pkgfile npm
zsh: command not found: pkgfile
➜ ~ sudo pacman -S pkgfile
resolving dependencies...
looking for inter-conflicts...
Packages (1): pkgfile-15-1
Total Download Size: 0.02 MiB
Total Installed Size: 0.05 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
pkgfile-15-1-x86_64 21.6 KiB 323K/s 00:00 [######################] 100%
(1/1) checking keys in keyring [######################] 100%
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) checking available disk space [######################] 100%
(1/1) installing pkgfile [######################] 100%
==> Run 'pkgfile --update' to initialize the database
➜ ~ pkgfile npm
error: No repo files found. Please run `pkgfile --update'.
➜ ~ pkgfile --update
error: unable to write to /var/cache/pkgfile: Permission denied
➜ ~ sudo pkgfile --update
:: Updating 4 repos...
download complete: multilib [ 224.2 KiB 372K/s 3 remaining]
download complete: core [ 608.8 KiB 536K/s 2 remaining]
download complete: extra [ 6.9 MiB 2038K/s 1 remaining]
download complete: community [ 10.9 MiB 2.55M/s 0 remaining]
:: download complete in 4.26s < 18.6 MiB 4.37M/s 4 files >
:: waiting for 1 process to finish repacking repos...
➜ ~ pkgfile npm
community/npm
➜ ~ cd development/anj
➜ anj ls
app.js bin bower.json package.json public routes views
➜ anj npm install
zsh: command not found: npm

Command not found on running binary files.

I have a very strange problem with my new arch installation, which I never faced on other linux installations/distros.
I'm trying to execute binary files from android-sdk, which I have them from other distros and always worked, and I get always "command not found" message. For e.g I tried to run adb(5 different files from different places), from terminal and from the folder in which is each and all times I get "command not found" message.
Some other work though, as eclipse binary. All files I've tried worked fine, and also work fine if I run them from Ubuntu installation.
I had this problem and for some newly isntalled packages too, as packagkit, and rutorrent. Packagekit worked after a reboot, but rutorrent gives same message.
Any help?

user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ QtADB
bash: QtADB: command not found
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ ./QtADBbash: ./QtADB: No such file or directory
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh ./QtADB
./QtADB: ./QtADB: cannot execute binary file
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh QtADB
QtADB: QtADB: cannot execute binary file
user-arch@archusrxpc /home/@solushome/user-solus/QtADB-cwm_edition $ ls -l
σύνολο 2940
-rw-rw-r-- 1 user-arch 1000 5259 Απρ 13 2012 Changes.txt
-rw-rw-r-- 1 user-arch 1000 25330 Ιούν 26 2012 debug.log
-rwxrwxr-x 1 user-arch 1000 2970612 Απρ 13 2012 QtADB
drwxr-xr-x 1 user-arch 1000 0 Ιούν 26 2012 tmp
drwxrwxr-x 1 user-arch 1000 366 Μάρ 13 2012 tools
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $
Last edited by dancer69 (2013-01-17 18:30:23)

Oracle apps 12i pre install checks fails in cl; command not found

Hi guyz,
Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
The installation fails in
command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
D:\stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/cygdrive/d/Tools/MKS/mksnt/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
Im doing this for a week now, had no luck.
I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
I appreciate any help.

Oracle E-Business Suite R12 Installation on Windows 2003
Re: Oracle E-Business Suite R12 Installation on Windows 2003
If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

Single user mode . using tail -f (command not found)

Have an empty computer with no systems disk as the installation CD start up will not go past the grey screen with the rotating logo before the panic crash page comes up and tells me to restart the computer.
Trying to boot into single user mode and then use the command tail -f to see contents of some of the logs... BUT I get the reply tail command not found ????

If the hard drive is empty, then you can only boot from the CD. Regardless of whether or not it has "tail," it won't do you any good. There are no logs.

Recover Accidentally Deleted Files in OS X via Terminal, "command not found"

Hi!
I am trying to recover a folder from the trash. It was deleted 30 min ago. The command I am trying to use is;
Mys-MacBook-Pro:~ storedisk$ com.apple.Finder AppleShowAllFiles true
And the response is;
-bash: com.apple.Finder: command not found
When I open any Terminal window I get this message, I don't know if this is relevant;
Last login: Wed Nov 13 08:27:40 on ttys001
I have found some similar replies on the forum but they do not seem to work in my case. I'm new to Terminal so I would really appreciate the help to find the cause and to resolve my problem.
Thanks a lot!

Thank you so much. This is the reply that I got;
Mys-MacBook-Pro:~ storedisk$ ls -a .Trash
.                                        Cherry Blossoms
..                                        FLiCKS
.DS_Store                              Nicholas Nickleby (1977)
13 Tzameti                              Robin Hood (2010)
Catch-22 [1970]                              We Live in Public 2009
Mys-MacBook-Pro:~ storedisk$ mv .Trash/FLiCKS .
Mys-MacBook-Pro:~ storedisk$
Mys-MacBook-Pro:~ storedisk$ mv .Trash/FLiCKS
usage: mv [-f | -i | -n] [-v] source target
       mv [-f | -i | -n] [-v] source ... directory
It is the FLiCKS folder that I am trying to retreive. Does this mean that I can retreive it? And if so, when I use the command mv .Trash/filename, where should it appear? Sorry for not fully understanding the instructions.
I also tend to empty the trash cumpulsively, which is how this happened in the first place. Trying to empty the files already in the trash but accidentally having had this folder selected I emptied that and kept the files that I didn't want.
The trash folder still has the size as if the folder FLiCKS is still in there though, if that makes any difference?
Thank you for all of your help.

Ldconfig: command not found

I just did a pacman -Syu and something went terribly wrong.
Whenever i try to install a new program i get something like this:
$ pacman -S glibc
warning: glibc-2.10.1-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): glibc-2.10.1-3
Total Download Size: 0.00 MB
Total Installed Size: 31.47 MB
Proceed with installation? [Y/n]
checking package integrity...
(1/1) checking for file conflicts [##############################] 100%
(1/1) upgrading glibc [##############################] 100%
/tmp/alpm_ZLRuBH/.INSTALL: line 39: ldconfig: command not found
/tmp/alpm_ZLRuBH/.INSTALL: line 40: init: command not found
Generating locales...
en_US.UTF-8... done
en_US.ISO-8859-1... done
Generation complete.
sh: ldconfig: command not found
error: command failed to execute correctly
Checking the integrity of the local database in /var/lib/pacman/
any ideas?

Have all the users with GNOME started a root's Terminal window???
I've noticed that using the Gnome's root terminal messes up the $PATH variable (as of today)... when i start archlinux (note: i don't use GDM) my path is:
/bin:/usr/bin:/sbin:/usr/sbin....
and many other items... but when a root terminal is started inside gnome, $PATH changes to:
/usr/ucb:/bin:/usr/bin:/etc
And ldconfig will fail... (and any other tool in /sbin) this change is restricted to this window only. If you exit the root terminal and go to a normal terminal, the path is what is expected.
This happens on a clean reformatted machine, installed archlinux, doing a pacman -Syu, installing gnome and all extras (including system administrations tools) (as tested today).
Maybe some config file is messed or is a bug from the Gnome guys...
Anyways the only workaround i can think is to start a normal terminal (for the guys that use gnome or use GDM to start their machines) and in the terminal doing a "su -" to got root access (of course will ask for the password) and then update/install/whatever you want with pacman.
And sorry about my english.
J.
Last edited by stargeizer (2009-09-24 14:35:10)

-bash: then : command not found

Hi
Sorry i have post the same problem in Infrastruture but i am not getting a quick reply.Thats why i am posting this in the database thread.
I have installed OEL 5.I am going to install Oracle 11g.I have configured Kernel for oracle.But now when give the command su - oracle there is an
-bash: then : command not found
-bash: : command not found
When i give su - then also same these lines appear.Please send me a solution.
Will this give nay problem in database installation
Regards
Bobby

user12119634(bobs) wrote:
Hi
Sorry i have post the same problem in Infrastruture but i am not getting a quick reply.Thats why i am posting this in the database thread.
I have installed OEL 5.I am going to install Oracle 11g.I have configured Kernel for oracle.But now when give the command su - oracle there is an
-bash: then : command not found
-bash: : command not found
When i give su - then also same these lines appear.Please send me a solution.
Will this give nay problem in database installation
Regards
BobbyTry
export PATH=/bin:$PATHthen do again

Type "purge" in Terminal and get: -bash: purge: command not found Is there another built-in command to clear memory leaks? want to clear memory periodically

I have 10.6.8. When I type "purge" in Terminal I get: -bash: purge: command not found Is there another built-in command to clear memory leaks? I have FreeMemory (works well) and considering FreeMemory Pro, to clear memory periodically, say every 20 minutes, or preferably when a threshold is reached, say when only 100MB is available.

To get purge to work you need to install Xcode from Optional Installs on the 10.6 install DVD. Also be sure you install CHUD Tools with it.
But running purge or anything like it is pointless if within a short period of time the VM just grows back again. Sounds like you need more RAM.
Where are the memory leaks? Just because the VM reaches a certain size doesn't necessarily mean it's from a memory leak.

Ln command not found causing Silverlight installation failure

Similar Messages

Maybe you are looking for