Load IBAN code in Infotype 0009 Bank Details

Hi everyone.
I'm on a massive upload of IBAN code for employees in the SAP-HR module.
When I try to build up a batch input, the screen doesn't show the IBAN button active. It doesn't occur when you manually go to PA30 -> infotype 9 -> Create (there's no problem when you do it manually).
This behaviour happens in many customers (it's no problem for a particular R/3)
There's a bapi for creating the IBAN code (BAPI_IBAN_CREATE), but I don't see the reference to an employee on that bapi.
Any suggestion?
Kind regards and a point bonus promise for any helpful answer.
Josep Rodergas

Hello Josep,
   Batch input very difficult way for this , You can use infotype BAPI FM "HR_INFOTYPE_OPERATION". And My Iban creation recommendation is "FIBF" , You can use "business transaction events". "CONVERT_BANK_ACCOUNT_2_IBAN"  modules.
I' ll hope its help you,
Best Regards,
İrfan.

Similar Messages

  • Adding a bank key directly in infotype 0009 (Bank details)

    Hi,
    in the infotype 0009, I want to enter a bank key that is not in the bank master data.
    Is it possible to configure the system so that a new bank key can be created directly in the infotype 0009 if it doesn't exist, rather than using the transaction FI01 ?
    Regards,

    Can u tel me the actual requirement ?!!!
    Y do u want to make it Optional ??
    By standard, it is mandatory only when Payment type is Transfer/Cheque....
    Then Bank Key is obvious...isnt it....
    Otherwise, on which bank, the cheque has to be prepared... hw do u come to know ?
    My suggestion, dont change it!!!
    Regards
    ...Sadhu

  • Override default values for infotype 0009 (Bank Details)

    Dear all,
    When we create a new bank details, default value will populate.
    I would like to know how to override these value, dynamic action? User exist? Feature? Or something else?
    Thanks in advance
    Regards
    Bill

    Hi Sikindar,
    Thanks for the reply, am trying to understand the options available.
    It look like the current behavior is: INITS + RUFNM
    and the user want to change it into: INITS only
    And it should only apply to country group 28
    Regards
    Bill

  • Problem with 0009 bank details infotype....

    Hi Experts,
    I am updataing the bank account number.Even though i created the new record ,the system is showing the previous record s enddate as 31.12.9999.My new account numbers are updated from 01.02.2008.How should my record delimts the end date as 31.01.2008.
    Please advice..
    sai.

    Hi Sai,
    First, which subtype (0 or 1)of bank details inotype (0009) are u trying to update?
    Also please check the time constraint of subtype 0 and 1 in view V_T591A using t-code SM30
    If the time constraint is 1, then it will only overwrite the record. If you want to delimit the previous record, change the time constraint to 2.
    Let me know if you have any questions.
    Regards,
    Reema

  • Facing problem while updating IInfotype 0009-bank details through workflow

    Dear SAP Gurus,
    I am facing a problem while updating Infotype 0009 through workflow which is integrdated with portal.
    Scenario:
    Employee logins to portal and changes his/her bank details like payee name, bank key, account number, postal code and city of bank, bank name etc.
    Once he submits the request, my workflow is triggered through SAP_WAPI_START_WORKFLOW which is called from portal and goes through various approval steps and finally reaches the step where the container elements are finally to be updated in IT0009.
    Field bank account number (BANKN), which is part of table PA0009 are easily updates using the FM HR_INFOTYPE_OPERATION by first enqueuing the employee number and after the update dequeuing it.
    However fields like payee name (EMFTX) bank key (BANKL) , bank name(BANKA -structure BNKA_BF-this is automatically fetched based on bank key) and postal code(BKPLZ) and city of bank (BKORT) are from structure Q0009 (on the infotype 9 screen level) and from table BNKA (at table level). The problem is that these are not getting updated by HR_INFOTYPE_OPERATION as they are not the part of infotype 9.
    Can anyone help me to understand how can these fields be updated ?
    Quick help will be highly appreciated.

    Hi Spantaleoni,
    Thanks for your quick response.
    Well actually the table BNKA is a master table for the bank information and we must not create entries in it or update the table programatically,  rather we should  use the available data in it.
    Now say employee currently has bank as A and he wants to change it as B which is available in BNKA then he will just select the bank B from search help provided in portal which again comes from table BNKA only. Employee then submits the info and it must get updated in the infotype PA0009.
    As far as think, this should be done on screen level of infotype PA0009 as I have already mentioned that certain fields are coming from structure Q0009 and they cannot be updated on PA0009 table level.
    I am just looking for way through which I can update the screen of infotype PA0009 of employee through workflow.
    Regards

  • IT 0009 Bank Details

    Hi All,
    Can you please tell me where in IMG we will configure the bank details that is bank key. I hired an EE and if he has a new bank say BOA with new routing no then where do we have to creat it.
    Thanks in advance
    Usefull answers will be rewarded

    Hi smith
    U cant enter bank details in IMG
    go to  PA30 masterdata
             0009 Infotype   
            create (F5)
    u can enter bank details
    Best wishes
    sekar

  • Infotype 9 Bank details Issue

    Dear Experts,
    Please suggest to solve below issue,
    One employee joined in June month (02.06.2014) and first month payment given as cash payment, So Infotype 9 maintained as cash payment and had run payroll and posted to FI for June month successfully.
    And july month salary paid as cheque payment, So Infotype 9 delimited and from 01.07.2014 maintained as Chequeq payment then while execute july payroll, the net payment is coming with two month salary, Cumulating  June payment in July period salary,
    I tried below steps to solve the issue but still it's cumulating 2 months salary in net pay,
    1. Checked in PC_Payresult , for June period BT not generated, only July period BT got generated with 2 month amounts.
    2. IT0003 ( Payroll status) Maintained only from July (01.07.2014) and ran payroll but the issue is remaining same,
    3. IT0009 (Bank details) 02.06.2014 to 30.06.2014) maintained as cash payment and for the period 01.07.2014 to 31.12.9999 miantained as cheque   payment and ran payroll but the issue is remaining the same.
    4. plan to delete Jun payroll and maintain check payment in IT09 since employee hired date (02.06.2014),
        but June payroll already got posted, and there is no posiablity to reverce this one emplyee posted document, (if reverce the document all other employees june posted document need to be reversed).
    5. Maintain the difference amounts in decuction WT at IT 15 and in payslip it's comming with correct result, but it's give mis match in FI posting.
    Below screens for your reference:
    Screen (PC-Payresult) BT not generated for June period.
    BT generated in July period cumulated with june payment.
    July RT for reference :
    BT for Reference
    Please suggest the possibilities to solve the issue.
    Thanks & Regards
    Prabu

    Hi Prabhu,
    I am not sure but try with the below mentioned hope your issue may get resolve.
    And also provide the screenshots, if any custom PCRs are written for X047 & X050.
    Regards,
    Narayana

  • Infotype for Bank details not highlighted even though user has access

    Even though a user has Bank details maintain role with P_PERNR object's authorisation field as R and W, in his PA20 - Personnel data tab - In infotype text- for Bank details there is no tick / correct mark. Doesnt the tick mark depend on all the authorisations that a user has or can perform? Please help me to understand it clearly

    Thanks for the input, I just want to clarify one more point that the user i am reffering to is an old user and his details such as bank information should have been maintained. But in this case the user / HR has not maintained it and once it is maintained it will show as tick mark is it ?

  • Triggered mail on record changes in infotype 9(bank details)

    Hi All,
    We have a requirement for triggering a mail notification on any record changes in table pa0009  (Bank Details - infotype 9).
    Please suggest.
    Thanks & Regards,
    Sujatha sahu.

    Hi all.
    I am new to this.
    actually  when i modified the data in pa30 for infotype 9, when i click the save button then email get trigger.
    this is my require ment.
    Please help me out of this.
    Thanks & Regards,
    Sujatha sahu

  • IBAN Generation for Turkey from bank details (FK01)

    Hi Experts,
    Is it possible to generate the IBAN from bank details for a Turkish (TR) supplier in FK01 ?
    If yes, can you please specify the required configuration ?
    I have checked the OSS note 925410 that shows how we can determine bank details from IBAN. BUt the client's demand is to generate the IBAN from bank details for the Tukish supplier.
    Thanks for sharing your precious knowledge !
    Regards,
    Mahesh

    Hi Srikanth,
    Thanks for thr reply.
    I had already read the OSS note 925408. It does noty mention any correction for Turkey : It mentions changes only for the countries Bosnia and Herzegovina, Bulgaria, Serbia and Montenegro, and Tunisia and it says to refer to note 925410 for Turkey.
    And in 925410 it explains hoe to generate bank details from IBAN. But I need the reverse of this , i.e from bank details to IBAN.
    Ragards,
    Mahesh

  • Infotype 9  ( Bank Details ) - Payment method

    Hi,
    Can someone tell me how the payment method in infotype 9 is driven ?  I mean is it driven by payment date or by the begin of the pay period ?
    Can we specify in SAP, how to consider or is it a default in SAP.
    Thanks,
    Sesha.

    I have an EE whose payment method has changed on the begining of the pay period. But when we run payroll, it still picks up the old payment method. Am not sure why ?

  • Authorization-Infotype Bank details

    Hi All,
    While changing infotype 0009-Bank Details, we are facing the authorization missing for SAPDBPNP.
    Please throw some light on why this would be needed to modify infotype bank details.
    Thank you.
    Regards.
    Nishy

    Hi,
    This is releated to your authorization issue because PNP is the Logical Data Base. Take a screen shot of su53 and discuss with your basis team.
    Thanks,
    Dora.

  • Removal of bank details

    hi could somebody tell me how to remove my bank details from the app store please?? i cannot download any games as everytime it says i need to log in which i do and it then wants me to put my bank card security code in which i do but still will not let me download ive tried doing most things that google suggest but still doesnt work

    Hi, an error
    Data record xxxxxxx(employee number) yyyymmddyyyymmddzzz  has grouping value /1 instead of u201C10,
    you must execute the following steps.
    SM30>V_T7CCE_GPASG->Add.
    GrpRsn ===Name=========================Status=============Grp Rule===Name
    0002          Personal Data(Infotype 0002)             SAP SAP entry            0002            Personal Data(Infotype 0002)
    0006         Address(Infotype 0006)                      SAP SAP entry            0006            Address(Infotype 0006)
    0009        Bank details(Infotype 0009)                  SAP SAP entry            0009           Bank details(Infotype 0009)
    0021        ....(Infotype 0021)                                 SAP SAP entry            0021           .....(Infotype 0021) 
    Check the notes 783499 and  Note 845592 (RPUFIXDS.)
    RPUFACECPRFN:(requerido), ajusta la tabla T582G desde la tabla T582A-CPRFN
    RPUFACEVIEKN (requerido), ajusta el campo P0003-VIEKN de acuerdo con la característica IVWID
    RPUFIXDS (No requerido pero recomendado), realiza correcciones de posibles inconsistencias en el campo PSHRD-GPRVL .
    I can share a document of this.
    Kind Regards

  • IBAN Code in IDOC

    Hi Group
    I have a requirement of sending IBAN code in IDOC to bank.
    I saw in IDOC segment - E1DB02 BB - Bank details including bank key, bank accounts, Swift Code but there is no IBAN code which is there in Vendor Master - Vendor Bank Information.
    Can anybody tell me how to get this?
    Regards,
    Amit

    You can try transaction SE38 - RFFOEDI1 - You will see for selection parameters - Go to Last output control section in that you will see "TRANSFER IBAN"
    Select this option and paying company code combination for which you want to transfer IBAN (Mostly Europe) and save as a variant. Use this variant in F110 against program RFFOEDI1.
    Regards,
    Amit Patel

  • 'CX_HRPA_INVALID_INFOTYPE_DB' Dump while maintaing Infotype 0009

    Hi,
    I got the below dump while maintained the IT 0009 (Bank details) of an user.
    The exception 'CX_HRPA_INVALID_INFOTYPE_DB' was raised, but it was not caught
    anywhere along
    the call hierarchy.
                                                                                    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_HRPA_TIMECONSTRAINT========CP' has to be
    terminated.    
    Kindly suggest how to correct this.
    Regards,
    Veeresh.

    Hi Veeresh,
    We are facing the same issue with infotype 185 (personal Ids). Could you please share the solution you found? Greatly appreciate your help.
    Thanks,
    Jaya

Maybe you are looking for

  • Development and Learning

    Hi freinds, Please explain me what is Learning Solution and SAP Tutor? Regards, Parul.

  • How do I switch to list view in the Pages local directory

    How can I switch from a grid of file icons to a list of filenames in Pages for iPad ?

  • Upgrading iphoto 9 and unable to access old iphoto library

    this week I did the maverick OS 10.9 upgrade without really reading about it, trusting that Apple knows what they are offering us. This upgrade prompted a suite  of annoying events. Apart from having to purchase new programs as the old ones would not

  • Black and white raw conversions

    The  raw converter in LR is good-I tend to reduce the saturation and use the luminance sliders. However,more variations in colour need to be catered for so that subtle differences in the grayscale shades of all the various hues (such as greens and bl

  • Custom Step Type: Sequence Call

    OK, I'm primarily a LabVIEW programmer, but in TestStand I understand how to: * Create a Custom Step Type * Link a LabVIEW Module for execution, post substep, edit substep, etc. * Prevent the user from selecting a different module for an instance of