Interaction history under Account Management not showing all quotes

We just noticed that when you look at a customer's account in the PCUI and look at the interaction history tab, not all quotes for this specific account show up.
Has anyone experienced this before and if so, what is the issue??
Thanks.

I also noticed that this occurs in the CRM GUI as well. If you search for all business transactions for a specific soldto and the amount is greater than 100, it only returns the first 100. I assume this is what the PCUI does by default.
Is there a way to return all the transactions?

Similar Messages

Account Dimension not showing all members in the cube in Analysis Services

Hi,
         In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
         The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
Sharath

Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801

Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801

BP interaction history does not show all the activities in portal

Hi Experts,
We have a problem in application CRMM_ACCOUNT when we go to BP interaction history does not show all the activities in portal as it is thr in activities screen.
Regards,
Mark

Hi Glenn Michaels,
Thanks for your response , If I look at the activities tab there were more activities than on the interaction history tab .
In allowed channels for transaction type we have 3 channels.
Can you guide me what to do next?
Regards,
Mark

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

I recently updated my e-mail address with apple, but now it does not show all the "purchased" music that I purchased under my old e-mail address. How can I re-gain access to those hundreds of purchased songs?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

In solution manager system not showing all the system in SLD

Dear Gurus,
During the installation of solution manger sysyem i selected as a Central SLD as solution manager
Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
But if i login into solution manger not able to see all the system in SLD.
Regards

Thanks for reply
it is not showing all the systems

More than 10 email accounts in TB - Not Showing all emails

Not showing all emails in UNIFIED Inbox Folder
I HAVE SETUP MORE THAN 10 EMAIL ACCOUNTS IN TB. THEN I SENT A TEST EMAIL TO ALL OF MY EMAIL ACCOUNTS.
WHEN I CHECK INBOX OF INDIVIDUAL EMAIL ACCOUNT, THERE IS EMAIL AND SHOWING IN INDIVIDUAL INBOX OF ALL EMAIL ACCOUNTS BUT UNFORTUANTELY IT IS NOT SHOWING IN UNIFIED FOLDER of ALL INBOXES. Unified Inbox Folder of all Emails Accounts is only showing few of them.
PLS ADV.

Please don't raise multiple threads for the same problem. Follow up at your OP at https://support.mozilla.org/en-US/questions/1003448.
P.S. Writing ALL CAPS is considered shouting.

The purchased items it is not showing all applications

I HAVE IPHONE 4S 16GB
WHEN I GO TO APP STORE FROM THE IPHONE TO THE PURCHASED ITEMS IT IS NOT SHOWING ALL APPLICATION WHICH ONE I DOWNLOADING
PLEASE I WANT A SOLUTION.

Hi, rsvip7.
I would recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test the results after processing these steps by attempting to access your previous purchases.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
If the issue persists, I would verify which Apple ID was used to make the purchases you are unable to locate. If the application is located on your computer, you can either Right-Click and Get Info on the selected media for Windows or Control-Click and Get Info for Mac. The Apple ID that was used to purchase the media will be on the Summary tab. You can also verify what Apple ID it was purchased with by accessing your purchase history by following the steps below.
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
If the account used to purchase the missing content is different, you will need to login with that Apple ID in order to access prior purchases.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Hope that helps,
Jason H.

Sent Emails and Account info not showing

I've just downloaded iOS 7 to my iPad 2. Everything seems OK except my different email accounts are not showing in the account listing. I'm receiving mail from both accounts and can send but they are showing collectively in Mailboxes under All Inboxes. I also can' access the Sent emails. I can see it in the iCloud list but when I click pon it to view it appears to send mails to iCloud and I don't know hoe to recall them from there? Any info would be great appreciated.

Online chat said there is maintenance, btcare on twitter says they are not aware of any issues even though one other twitter post says he can't access account, case of left hand not knowing what right is doing - typical BT
Also can't change weather location on BT home page.

I tunes does not show all of the songs that are on my i pod

When I go to i tunes it does not show all the music that is on my ipod, since I got a new computer. I didn't change usernames or accounts or anything, how do I fix theis?

Where are you looking at in iTunes? Did you click the small black triangle next to your iPod under Devices in the left hand pane of iTunes to bring up a submenu of content. Click the on Music one. Is all of your content listed there?
B-rock

List view not showing all podcasts

Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5

Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

Accounting document not showing in G/L -fbl3n

Dear All,
We are facing a problem n accounting document not showing in G/L FBL3N. when i saw in FB03 then it showing with all details including GL account. but when i go in FBL3N it was not showing. The document posted from payroll hra component. fb03 screen shot attached.
Thanks,
Mukesh

Hi .
Did you enter the correct parameter in FBl3n . Its looks liek this is related to Fiscal year 2013 and posted on 31.05.2013. .
Can you please neter below parameters in FBl3n
company code 1000
GL account 42001021
All item
Posting date 31.05.2013 to 31.05.2013
I am little bit confused that your header of document not showing any Ledger group as well . can you please run FBL3n with above parameters and if it doesn't display letus know .

My contact list does not show all my contacts.

My contact list does not show all my contacts. If I keypad a number not shown in the contacts it does know who that contact is. What can I do to show all contacts? I have 352 contacts in the phone.

Do you have different Groups for contacts? For example, perhaps you have some contacts stored on the device, some associated with a Yahoo account, and others associated with an Exchange account. If you have multiple groups like this, tap the "Groups" button at the top-left corner in Contacts and see if you're looking at only a subset of your contacts. There is an option to view "All Contacts", which summarizes them all for you.

Finder does not show all colors from selected color Labels

Since a view days finder does not show all Color Label colors. When I select either yellow or green it is selected, but it does not show in the file list with details, I can see it in icon and 3 pane view, but not in the detail list view.
does anybody know why or how? Or what plist files I might need to delete to get this reset?

Create a new account, name it "test" and see how your labels work in that User acct in list view? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

Interaction history under Account Management not showing all quotes

Similar Messages

Maybe you are looking for