LOAD_PROGRAM_NOT_FOUND when calling transaction in ECC6 from CRM3.0

Hi
Very new to CRM so would appreciate any assistance here.
We have a CRM 3.0 system and have recently replaced the old 4.7 R3 system with ECC6 The ECC6 system has a different logical system name to the old 4.7 system. We have created a new RFC destination, a new logical system name, linked then in BD97 etc as per note 363097.
We then changed the logical system names in the action boxes to the new logical system.
When we call the transactions in the new system it shortdumps in the destination system with LOAD_PROGRAM_NOT_FOUND and the program it is trying to load is as follows.
/1ISU/ENMD4MAND300ZMK00000VA21. This program name is what it tries to call when we want to call VA21 in the R3 system. It is prefixing the transaction code with language, source logical system and action box configuration name. You can change the transaction code to VA23 and the program name it dumps on becomes /1ISU/ENMD4MAND300ZMK00000VA23.
Can anyone explain why it is doing this and what we can do to fix it?
Thanks
Leigh

Hi Liegh,
Even i was facing similar problem of Load_Program_not_found. For this you can check the program name in your queus, which will give the name of the program which is not active, then check the same program in your debugging process above.
Try and let me know, cos my problem was fixed by this.
Best Regards,
Madhup

Similar Messages

Skipping multiple screens when calling transaction.

Hi Gurus,
It's quite easy to call transaction mm03 with from an ABAP program.
Filling the parameter ID MAT with the material, and you're good to go.
Call transaction 'MM03' and skip first screen.
So far so good. But is it also possible to enter data for the next screens (you have to select a view and plant). Now the user still has to enter that data and I was wondering if I could do that automatically...
kind regards,
Ron.

Hi
CALL TRANSACTION ta USING bdc_tab
bdc_tab of row type BDCDATA from the ABAP Dictionary
regards
Pavan

Skip first screen when calling transaction via BDC

I need to use BDC to call transaction FD32 and suppress the first screen. Do I need to set BDC_OKCODE? However, when I set BDC_OKCODE to '/00', this error occured, "System error: Error in routine DYNPRO_ERSTES_BILD".
Here is my code:
CLEAR ls_bdcdata.
ls_bdcdata-program = 'SAPMF02C'.
ls_bdcdata-dynpro = '0100'.
ls_bdcdata-dynbegin = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KUNNR'.
ls_bdcdata-fval = gs_data-kunnr.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KKBER'.
ls_bdcdata-fval = p_kkber.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0105'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'BDC_OKCODE'.
ls_bdcdata-fval = '/00'.
APPEND ls_bdcdata TO lt_bdcdata.
opt-dismode = 'E'.
opt-defsize = 'X'.
CALL TRANSACTION 'FD32' USING lt_bdcdata OPTIONS FROM opt.
Any suggestions?

Hi,
Try this..This is working fine for me..
CLEAR ls_bdcdata.
ls_bdcdata-program = 'SAPMF02C'.
ls_bdcdata-dynpro = '0100'.
ls_bdcdata-dynbegin = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'BDC_CURSOR'.
ls_bdcdata-fval = 'RF02L-D0110'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'BDC_OKCODE'.
ls_bdcdata-fval = '/00'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KUNNR'.
ls_bdcdata-fval = gs_data-kunnr.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-KKBER'.
ls_bdcdata-fval = p_kkber.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0105'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0110'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CLEAR ls_bdcdata.
ls_bdcdata-fnam = 'RF02L-D0120'.
ls_bdcdata-fval = 'X'.
APPEND ls_bdcdata TO lt_bdcdata.
CALL TRANSACTION 'FD32' USING lt_bdcdata MODE 'E'.
Thanks,
Naren

Character conversion problems when calling FM via RFC from Unicode ECC 6.0?

Hi all,
I faced a Cyrillic character convertion problem while calling an RFC function from R/3 ECC 6.0 (initialized as Unicode system - c.p. 4103). My target system is R/3 4.6C with default c.p. 1500.
The parameter I used in my FM interface in target system is of type CHAR10 (single-byte, obviously).
I have defined rfc-connection (SM59) as an ABAP connection and further client/logon language/user/password are supplied.
The problem I faced is, that Cyrillic symbols are transferred as '#' in the target system ('#' is set as default symbol in RFC-destination definition in case character convertion error is met).
Checking convertions between c.p. 4103 and target c.p. 1500 in my source system using tools of transaction i18n shows no errors - means conversion passed O.K. It seems default character conversion executed by source system whithin the scope of RFC-destination definition is doing something wrong.
Further, I played with MDMP & Unicode settings whithin the RFC-destination definition with no successful result - perhaps due to lack of documentation for how to set and manage these parameters.
The question is: have someone any experience with any conversion between Unicode and non-Unicide systems via RFC-call (non-English target obligatory !!!), or can anyone share valuable information regarding this issue - what should be managed in the RFC-destination in order to get character conversion working? Is it acceptable to use any character parameter in the target function module interface at all?
Many thanks in advance.
Regards,
Ivaylo Mutafchiev
Senior SAP ABAP Consultant

hey,
I had a similar experience. I was interfacing between 4.6 (RFC), PI and ECC 6.0 (ABAP Proxy). When data was passed from ECC to 4.6, RFC received them incorrectly. So i had to send trimmed strings from ECC and receive them as strings in RFC (esp for CURR and QUAN fields). Also the receiver communication channel in PI (between PI and RFC) had to be set as Non unicode. This helped a bit. But still I am getting 2 issues, truncation of values and some additional digits !! But the above changes resolved unwanted characters problem like "<" and "#". You can find a related post in my id. Hope this info helps..

Call transaction tcode OPTIONS FROM opt ?

hi,
i use BDC for a enhanced t/code, so i think i should use no batch input mode to call the transaction,
could someone give a code example about this ?
thanks!

see the simple example code :
Report     : ZMPPC018
Type       : Data upload
Author     : Seshu Maramreddy
Date       : 07/05/2005
Transport : DV3K921247
Transaction: ??
Description: This ABAP/4 Program to Update Rate Routing Material PRT's
             for SMI plants using CA22 Transaction.It accepts
             tab-delimited spreadsheet input and Run the Call
             Transaction Method.
report zmppc018 no standard page heading
                line-size 120
                line-count 55
                message-id zz.
Constants
constants : c_x type c value 'X'," Dynbegin
            c_tcode type tstc-tcode value 'CA22'," Transaction Code
            c_r(1) type c value 'R'," Task List type
            c_O(1) type c value 'O',
            c_fh(2) type c value 'FH'.
Variables
data : v_lines_in_xcel like sy-tabix,
       v_matnr(18) type c, " Material Number
       v_PLNNR like mapl-plnnr," Group
       V_DATE(8) type c," System date
       v_date1(4) type c,
       v_date2(2) type c,
       v_date3(2) type c,
       V_COUNT TYPE I." Count
Internal table for BDCDATA Structure
data : begin of itab_bdc_tab occurs 0.
        include structure bdcdata.
data : end of itab_bdc_tab.
Internal table for File
data : begin of t_file occurs 0,
       matnr(18) type c, " Material #
       werks(4) type c, " Plant
       plnal(2) type n, " Group Counter
       vornr(4) type n, " Op #
       equnr(18) type c, " PRT Material #
       steuf(4) type c, " Control Key
       mgvgw(6) type n, " Qty
       mgeinh(3) type c, " Qty Unit
       end of t_file.
Internal table for Error Log
data : begin of i_error occurs 0,
       matnr like mara-matnr,
       werks like marc-werks,
       vornr like plpo-vornr,
       plnnr like plpo-plnnr,
       text(90) type c,
       end of i_error.
Selection-screen
selection-screen : begin of block blk with frame.
selection-screen: skip 1.
parameters : p_file like rlgrap-filename obligatory,
             P_mode type c obligatory Default 'N'.
selection-screen : skip 1.
selection-screen : end of block blk.
at selection-screen on value-request for p_file.
F4 value for Input file
perform filename_get.
main processing
start-of-selection.
To get the data from file to Internal table
perform getdata_fromfile.
loop at t_file.
fill in bdc-data for Routing maintenance screens
    perform bdc_build_script.
insert the bdc script as a BDC transaction
    perform bdc_submit_transaction.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1       =
FLEX_TEXT2       =
FLEX_TEXT3       =
skip 1.
write:/2 'Material #',24 'Plant',32 'Group',44 'Op #',
          53 'Status Message'.
skip 1.
*&      Form filename_get
      F4 Value for Input File parameter
FORM filename_get.
CALL FUNCTION 'WS_FILENAME_GET'
       EXPORTING
            DEF_PATH         = 'C:\Temp\ '
            MASK             = ',.,..'
            MODE             = 'O'
            TITLE            = 'Select File '(007)
       IMPORTING
            FILENAME         = p_file
       EXCEPTIONS
            INV_WINSYS       = 1
            NO_BATCH         = 2
            SELECTION_CANCEL = 3
            SELECTION_ERROR = 4
            OTHERS           = 5.
ENDFORM.                    " filename_get
*&      Form getdata_fromfile
      text
FORM getdata_fromfile.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            FILENAME                = p_file
            FILETYPE                = 'DAT'
       TABLES
            DATA_TAB                = t_file
       EXCEPTIONS
            CONVERSION_ERROR        = 1
            FILE_OPEN_ERROR         = 2
            FILE_READ_ERROR         = 3
            INVALID_TYPE            = 4
            NO_BATCH                = 5
            UNKNOWN_ERROR           = 6
            INVALID_TABLE_WIDTH     = 7
            GUI_REFUSE_FILETRANSFER = 8
            CUSTOMER_ERROR          = 9
            OTHERS                  = 10.
if sy-subrc eq 0.
    sort t_file by matnr werks plnal vornr .
    clear v_lines_in_xcel.
    describe table t_file lines v_lines_in_xcel.
    if v_lines_in_xcel is initial.
      write: / 'No data in input file'.
      stop.
    endif.
else.
    write:/ 'Error reading input file'.
    stop.
endif.
ENDFORM.                    " getdata_fromfile
*&      Form bdc_build_script
      BDC Script
FORM bdc_build_script.
   Get the material number from tables ZMSMI_FERR_RAW,
   ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
perform get_matnr.
Screen 1010.
perform bdc_screen using 'SAPLCPDI'    '1010'.
perform bdc_field using 'BDC_OKCODE' '=VOUE'.
perform bdc_field using 'RC27M-MATNR' SPACE .
perform bdc_field using 'RC27M-WERKS' SPACE.
perform bdc_field using 'RC271-VBELN' SPACE.
perform bdc_field using 'RC271-POSNR' SPACE.
perform bdc_field using 'RC271-PSPNR' SPACE.
Clear v_plnnr.
Get the Group from MAPL Table
select single plnnr from mapl
                      into v_plnnr
                      where matnr = t_file-matnr
                      and   werks = t_file-werks
                      and   loekz = space
                      and   plnty = c_r
                      and   plnal = t_file-plnal.
perform bdc_field using 'RC271-PLNNR'   v_plnnr.
Current date
MOVE SY-DATUM TO V_DATE.
perform get_date.
perform bdc_field using 'RC271-STTAG'   V_DATE.
perform bdc_field using 'RC271-PLNAL'   t_file-plnal.
Screen 5400
perform bdc_screen using 'SAPLCPDI'    '5400'.
perform bdc_field using 'BDC_OKCODE' '=OSEA'.
Screen 1010
perform bdc_screen using 'SAPLCP02' '1010'.
perform bdc_field using 'BDC_OKCODE' '=ENT1'.
perform bdc_field using 'RC27H-VORNR' T_FILE-VORNR.
Screen 5400
perform bdc_screen using 'SAPLCPDI'    '5400'.
perform bdc_field using 'BDC_OKCODE' '=FHUE'.
perform bdc_field using 'RC27X-FLG_SEL(01)' C_X.
Get the no of records from PLAS,PLPO and PLFH Tables
perform get_count.
Screen 0200
IF V_COUNT = 0.
    perform bdc_screen using 'SAPLCFDI'    '0200'.
    perform bdc_field using 'BDC_OKCODE' '/EFIM'.
ELSEif v_count > 0.
Screen 0100
    perform bdc_screen using 'SAPLCFDI'    '0100'.
    perform bdc_field using 'BDC_OKCODE' '/EFIM'.
ENDIF.
Screen 0230
perform bdc_screen using 'SAPLCFDI'    '0200'.
perform bdc_field using 'BDC_OKCODE' '=BACK'.
perform bdc_field using 'PLFHD-MATNR' T_FILE-EQUNR.
perform bdc_field using 'PLFHD-STEUF' T_FILE-STEUF.
perform bdc_field using 'PLFHD-MGVGW' T_FILE-mgvgw.
perform bdc_field using 'PLFHD-MGEINH' T_FILE-MGEINH.
Screen 0100
perform bdc_screen using 'SAPLCFDI'    '0100'.
perform bdc_field using 'BDC_OKCODE' '=BU'.
ENDFORM.                    " bdc_build_script
*&      Form get_matnr
      Get the material number from tables ZMSMI_FERR_RAW,
      ZMSMI_SNAP_RAW and ZMSMI_SIMP_RAW
FORM get_matnr.
clear v_matnr.
case t_file-werks.
    when '0101'.
      select single cmatnr from zmsmi_simp_raw
             into v_matnr where matnr = t_file-matnr.
      if not v_matnr is initial.
        clear t_file-matnr.
        t_file-matnr = v_matnr.
      endif.
    when '0103'.
      select single cmatnr from zmsmi_ferr_raw
             into v_matnr where matnr = t_file-matnr.
      if not v_matnr is initial.
        clear t_file-matnr.
        t_file-matnr = v_matnr.
      endif.
    when '0102' or '0110' or '0111' or '0112' or '0113'
         or '0114' or '0115' or '0116' or '0117'.
      select single cmatnr from zmsmi_snap_raw
             into v_matnr where matnr = t_file-matnr.
      if not v_matnr is initial.
        clear t_file-matnr.
        t_file-matnr = v_matnr.
      endif.
endcase.
ENDFORM.                    " get_matnr
*&      Form bdc_screen
      BDC Script for Screen fields
     -->P_PROG   Program name
     -->P_SCRN   Screen Number
FORM bdc_screen USING    p_prog
                         p_scrn.
clear itab_bdc_tab.
itab_bdc_tab-program = p_prog.
itab_bdc_tab-dynpro = p_scrn.
itab_bdc_tab-dynbegin = c_x.
append itab_bdc_tab.
ENDFORM.                    " bdc_screen
*&      Form bdc_field
      BDC Script for Screen fileds
     -->P_NAM   Field name
     -->P_VAL   Field value
FORM bdc_field USING    p_nam
                        p_val.
clear itab_bdc_tab.
itab_bdc_tab-fnam = p_nam.
itab_bdc_tab-fval = p_val.
append itab_bdc_tab.
ENDFORM.                    " bdc_field
*&      Form bdc_submit_transaction
      BDC_INSERT Function Module
FORM bdc_submit_transaction.
call transaction c_tcode using itab_bdc_tab
                   mode p_mode update 'S'.
refresh itab_bdc_tab.
CALL FUNCTION 'FORMAT_MESSAGE'
       EXPORTING
            ID        = SY-MSGID
            LANG      = '-E'
            NO        = SY-MSGNO
            V1        = SY-MSGV1
            V2        = SY-MSGV2
            V3        = SY-MSGV3
            V4        = SY-MSGV4
       IMPORTING
            MSG       = i_error-text
       EXCEPTIONS
            NOT_FOUND = 1
            OTHERS    = 2.
i_error-matnr = t_file-matnr.
i_error-werks = t_file-werks.
i_error-plnnr = v_plnnr.
i_error-vornr = t_file-vornr.
append i_error.
clear i_error.
clear t_file.
ENDFORM.                    " bdc_submit_transaction
*&      Form get_date
      Converted date as per CA22 Transaction
FORM get_date.
clear : v_date,
           v_date1,
           v_date2,
           v_date3.
v_date1 = sy-datum+0(4).
v_date2 = sy-datum+4(2).
v_date3 = sy-datum+6(2).
concatenate v_date2 v_date3 v_date1 into v_date.
ENDFORM.                    " get_date
*&      Form get_count
      text
FORM get_count.
clear v_count.
select count(*) into v_count
           from plas as a inner join plpo as b on aplnty = bplnty
                                              and aplnnr = bplnnr
                                              and aplnkn = bplnkn
                    inner join plfh as c on cplnty = aplnty
                                        and   cplnnr = aplnnr
                                        and   cplnal = aplnal
                                        and   cplnfl = aplnfl
                                        and   cplnkn = bplnkn
                     where a~plnty = c_r
                     and   a~plnnr = v_plnnr
                     and   a~plnal = t_file-plnal
                     and   c~objct = c_O
                     and   a~loekz = space
                     and   b~vornr = t_file-vornr
                     and   c~objty = c_fh
                     and   c~loekz = space.
ENDFORM.                    " get_count
end-of-selection.
Displaying Error Log
loop at i_error.
write:/2 i_error-matnr,24 i_error-werks,32 i_error-plnnr,
       44 i_error-vornr,50 '-', 53 i_error-text.
endloop.

Slow response when calling a web service from an ADF client in JDev 11g

I have generated a web service (WS) for a stored procedure package with 3 functions. The WS has less than 1 second response times when I use the standard WS testing facility. I then created a data control for the WS selecting the default values in the JDev wizard. When I test the functions from a very basic ADF client the response times for the same functions are between 3-4 seconds i.e. very SLOW compared to the actual response time of WS. I need some advice on how to investigate this performance degredation as seen from the ADF client.
Could the problem be that the data control was created from a web service in the same project? Maybe it is necessary to have them in separate projects or create a proxy?
I created and tested the web service with the standard WS test tool and then simply went on to create a data control from this web service for use from a ADF client.
Some background info:
I saw the following warning in step 8 of the WS creation wizard:
"The configured policy store location at "C:\Oracle\Middleware\jdeveloper\j2ee\home\gmds" is invalid. Application cannot read policies from this location. Check that the directory name is correct and the location exists."
Also I can confirm that there is no j2ee directory in my environment.
The application server logs the following for each call from the ADF client:
009-apr-01 15:55:22 oracle.adf.model.connection.webservice.impl.WebServiceConnectionMessages debugGetSaajInteraction
INFO: Creating a SaajInteraction for oracle.j2ee.ws.model.OperationImpl@1c81d2c
2009-apr-01 15:55:22 oracle.adf.model.connection.webservice.impl.WebServiceConnectionMessages debugGetSaajInteractionResult
INFO: Created [email protected]79edc for oracle.j2ee.ws.model.OperationImpl@1c81d2c
2009-apr-01 15:55:22 oracle.j2ee.ws.rm.LogMessages logExceptionAsWarning
VARNING: Internal error: oracle.wsm.policy.model.PolicyModelException: WSM-01647 : There are no policies that match the specified category wsrm and resource pattern {1}.
2009-apr-01 15:55:22 oracle.fabric.common.AbstractSecurityInterceptor init
INFO: AbstractSecurityInterceptor:init(), client.mode.jse==ture and isJEE==true, probably is a case of JEE client calling JSE client
2009-apr-01 15:55:22 oracle.wsm.agent.WSMAgent init
INFO: WSMAgent is initialized for category=management, function=agent.function.client, topologyNodePath=null, isJ2EE=true
2009-apr-01 15:55:22 oracle.fabric.common.AbstractSecurityInterceptor init
INFO: AbstractSecurityInterceptor:init(), client.mode.jse==ture and isJEE==true, probably is a case of JEE client calling JSE client
2009-apr-01 15:55:22 oracle.wsm.agent.WSMAgent init
INFO: WSMAgent is initialized for category=security, function=agent.function.client, topologyNodePath=null, isJ2EE=true
2009-apr-01 15:55:24 oracle.wsm.common.logging.WsmMessageLogger logSevere
ALLVARLIG: error in the Oracle WSM Policy Resolver Initialization, because incorrect configuration is passed: {0} {1}
Edited by: user10601664 on Apr 8, 2009 7:11 AM

Find solution. Check this thread:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2bweb%2bservice
The com.sap.tc.webdynpro.model.webservice.api.IWDWSInvocationModifier interface can be implemented by an application using the Adaptive Web Service model in order to modify the web service invocation object just before it's execution. Invocation modifiers need to be registered with the executable model class for which invocation is to be modified:
Request_NumberToWords requestMO = new Request_NumberToWords(model);
requestMO.wdSetInvocationModifier(
new IWDWSInvocationModifier() {
    public void doModifyInvocation(Object port) {
      HTTPControlInterface httpItf = HTTPControlFactory.getInterface(port);
      //timeout for this WS invocation is 120 sec; don't use global config. setting of WS-Runtime
      httpItf.setSocketTimeout(120000);
    public void doModifyAfterInvocation() {}
Best regards.

Error when calling a stored procedure from a SQL Script

Apologies if this is a really dumb question but I can't seem to call a procedure in package from a SQL script. I have a simple package.procedure containing a loop to populate a table. I would like to include a call to this procedure from my database install script, that also includes my CREATE and INSERT statements. I run the script using "@install_databae" and the CREATE and INSERT statements run fine. The script gives an error when it reaches the line below:
exec lazarus.PopulateGridPositions;
and gives the error.....
BEGIN lazarus.PopulateGridPositions; END;
ERROR at line 1:
ORA-04063: package body "LAZARUS.LAZARUS" has errors
ORA-06508: PL/SQL: could not find program unit being called: "LAZARUS.LAZARUS"
ORA-06512: at line 1
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.
I've obviously missed some fundamental concept with scripts and SQL. Please can anybody help me?

Histon FTM wrote:
ORA-04063: package body "LAZARUS.LAZARUS" has errors Above, obviously conflicts with the statement that follows:
>
The procedure and package have both compiled without errors and the statement on its own works fine in SQL*Plus.I suggest you take a look in the USER_ERRORS view to see, what the errors are.
And just checking:
You have schema called LAZARUS, which holds a package named LAZARUS, which holds a procedure called POPULATEGRIDPOSITIONS?
Edited by: Toon Koppelaars on Oct 1, 2009 5:55 PM

Error ITS_TEMPLATE_NOT_FOUND when calling a function code from the web

Hi Experts,
I have craeted a simple module pool program and a service for the same in SICF. The module pool has only one screen where I am giving the input to the two fieds
1. year 2. category. when I click on FIND button the result will appear on the same screen. The result will be the winner and the nominees for that year. The program is running perfect when I execute the transaction in R/3.
The coding in the PAI of the module pool is as follows:
*& Module Pool       ZYMOVIE1
INCLUDE ZYMOVIE1TOP                             .    " global Data
INCLUDE ZYMOVIE1O01                             . " PBO-Modules
INCLUDE ZYMOVIE1I01                             . " PAI-Modules
INCLUDE ZYMOVIE1F01                             . " FORM-Routines
tables : ymovie.
DATA:     OKCODE like sy-ucomm.
tables: ztext.
*&      Module GET_RECORD INPUT
      text
MODULE GET_RECORD INPUT.
case okcode.
when 'FIND'.
SELECT SINGLE * FROM YMOVIE
               WHERE YYEAR      = YMOVIE-YYEAR
                     AND CATEGORY     = YMOVIE-CATEGORY.
endcase.
ENDMODULE.                 " GET_RECORD INPUT
I have created a Internet service ZYMOVIE1 ans created a template for screen 9000
The HTML code is as follows:
`include(~service="bbpglobal", ~name="bbpfunctions.html")`
<html>
<head>
<title>`~windowtitle`</title>
</head>
<body>
`~messageline`
<form name="formFind" action=”`wgateUrl()`” method="POST">
   year : <input type = "text" name = "`YMOVIE-YYEAR`"/>
   category : <input type = "text" name = "`YMOVIE-CATEGORY`"/>
<INPUT TYPE="hidden" name="~okcode" value="FIND">
<INPUT TYPE="submit" name="btnSubmit" value="FIND">
<input type = "text" name = "YMOVIE-WINNER" value= "`YMOVIE-WINNER`" size = "`YMOVIE-WINNER.maxsize`"/>
<input type = "text" name = "YMOVIE-NOMINEE1" value= "`YMOVIE-NOMINEE1`" size = "`YMOVIE-NOMINEE1.maxsize`"/>
<input type = "text" name = "YMOVIE-NOMINEE2" value= "`YMOVIE-NOMINEE2`" size = "`YMOVIE-NOMINEE2.maxsize`"/>
<input type = "text" name = "YMOVIE-NOMINEE3" value= "`YMOVIE-NOMINEE3`" size = "`YMOVIE-NOMINEE3.maxsize`"/>
</form>
</body>
</html>
when i click on the FIND button in the web I am getting a dump "ITS_TEMPLATE_NOT_FOUND".
Please suggest me where I am doing wrong. Also is there any way i can add attachemtns in SDN. It is very difficult to write everything here and how to use the "code" button when i create a new thread in SDN?/
thanks
sankar

hi
yes i got some entries in SM50 with w at the left
A Error Code ITS_TEMPLATE_NOT_FOUND.
W      *** ERROR => diag: Template for modulepool ZYMOVIE1, dynpro number 9000, service zymovie1 is not found and GenerateDynpro fla
W      *** ERROR => plugin: XKrnHandleResponse failed rc= -25 [itspxkrn.cpp 764]
W      *** ERROR => plugin: ItspXKrn_HandleResponse failed. 0x2b96feff78 rc: 0 [itspxkrn.cpp 391]
W    *** ERROR => ipl_ConvertOut failed rc = 1, send icf error page [itsplxx.c    1551]
let me know if you need any other information
thanks
sankar

Error when Calling Transaction in ABAP Proxy

Hi All,
I'm trying to call a transaction in synchronous ABAP Proxy, but there's a CNTL_ERROR in the details of SXMB_MONI.
I've checked some threads related to this problem, but they're not solved yet.
Please advise, can I use "call transaction" in synchronous ABAP Proxy ? Is there any additional setting / code to prevent the error ?
Thanks in advance,
Andy S

Hi Stefan,
I'm trying to assign marketing attributes in our CRM Business Partner Transaction, which is triggered by messages sent from some 3rd party application.
Recently, I find out that this transaction (TCode BP) raise the same error (CNTL_ERROR) if run background from SM35. So the problem is not about calling transaction in ABAP Proxy, but due to the TCode BP itself.......
My ABAPER friend is trying to find the BAPI to replace this call transaction .........
Thanks a lot for your response........
Regards,
Andy S

Problems when calling the SOAP adapter from a Webdynpro

Hi,
An error occurs in the SOAP adapter when sending a message from a Webdynpro client. I have downloaded the SAP Soap Client and made the same test and that works fine.
I had to do some debugging to finally find the stack trace found below.
Does anybody have an idea of why the call doesn't work from Webdynpro?
<text>com.sap.aii.af.service.cpa.CPAException: invalid channel (party:service:channel) = <null>
     at com.sap.aii.af.mp.soap.web.MessageServlet.getChannelID(MessageServlet.java:415)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:377)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)</text>
</s:SystemError>
Thanks for help,
Hans

Hi Suraj
First I should mention that I have imported a generated WSDL from XI to create the Model and thus the port configuration. The URL looks like this:
http://<host>:<port>/XISOAPAdapter/MessageServlet?Version=3.0&Channel=:Telia_Kundservice_portal:Sender_SOAP&version=3.0&Sender.Service=Telia_Kundservice_portal&Interface=urn%3Aacandofrontec.se%2FTelia%2Ffaktura%5ETelia_faktura_4
Service = Telia_Kundservice_portal
Channel = Sender_SOAP
I've also tried with a modified shorter version which is also the one I'm using from the SAP SOAP client.
http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=:Telia_Kundservice_portal:Sender_SOAP
The actual call is a typical one:
wdContext.currentRequest_Faktura().modelObject().execute();
Before this call the Basic authentication (user/passw) is set.
Regards,
Hans

Problem when calling BPEL process (WS) from APEX

I am trying to add a web service call to a BPEL process I have created (tried a few others aswell), but every time I try to add the WDSL file I get the following error:
*1 error has occurred*
The WSDL document contains multiple SOAP bindings. Application Express only supports WSDL's with one SOAP binding. Click Create Web Service Reference Manually to continue creating a reference for this service.
It is a simple BPEL process which works fine when called from the BPEL Console, however I have no success when calling it from APEX.
Am I doing something wrong, or is there a bug in BPEL/APEX?
Oracle BPEL Console v10.1.3.1.0
Apex: 3.2
The WDSL looks like this:
<definitions name="BPELProcess9" targetNamespace="http://xmlns.oracle.com/BPELProcess9">
−
<types>
−
<schema>
<import namespace="http://xmlns.oracle.com/BPELProcess9" schemaLocation="BPELProcess9.xsd"/>
</schema>
−
<schema>
<import namespace="http://schemas.xmlsoap.org/ws/2003/03/addressing" schemaLocation="http://xxx:8888/orabpel/xmllib/ws-addressing.xsd"/>
</schema>
</types>
−
<message name="BPELProcess9ResponseMessage">
<part name="payload" element="tns:BPELProcess9ProcessResponse"/>
</message>
−
<message name="BPELProcess9RequestMessage">
<part name="payload" element="tns:BPELProcess9ProcessRequest"/>
</message>
−
<message name="WSAReplyToHeader">
<part name="ReplyTo" element="wsa:ReplyTo"/>
</message>
−
<message name="WSARelatesToHeader">
<part name="RelatesTo" element="wsa:RelatesTo"/>
</message>
−
<message name="WSAMessageIDHeader">
<part name="MessageID" element="wsa:MessageID"/>
</message>
−
<portType name="BPELProcess9Callback">
−
<operation name="onResult">
<input message="tns:BPELProcess9ResponseMessage"/>
</operation>
</portType>
−
<portType name="BPELProcess9">
−
<operation name="initiate">
<input message="tns:BPELProcess9RequestMessage"/>
</operation>
</portType>
−
<binding name="BPELProcess9Binding" type="tns:BPELProcess9">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
<operation name="initiate">
<soap:operation style="document" soapAction="initiate"/>
−
<input>
<soap:header message="tns:WSAReplyToHeader" part="ReplyTo" use="literal" encodingStyle=""/>
<soap:header message="tns:WSAMessageIDHeader" part="MessageID" use="literal" encodingStyle=""/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
−
<binding name="BPELProcess9CallbackBinding" type="tns:BPELProcess9Callback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
−
<operation name="onResult">
<soap:operation style="document" soapAction="onResult"/>
−
<input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle=""/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
−
<service name="BPELProcess9">
−
<port name="BPELProcess9Port" binding="tns:BPELProcess9Binding">
<soap:address location="http://xxxx:8888/orabpel/default/BPELProcess9/1.1"/>
</port>
</service>
−
<service name="BPELProcess9CallbackService">
−
<port name="BPELProcess9CallbackPort" binding="tns:BPELProcess9CallbackBinding">
<soap:address location="http://set.by.caller"/>
</port>
</service>
−
<plnk:partnerLinkType name="BPELProcess9">
−
<plnk:role name="BPELProcess9Requester">
<plnk:portType name="tns:BPELProcess9Callback"/>
</plnk:role>
−
<plnk:role name="BPELProcess9Provider">
<plnk:portType name="tns:BPELProcess9"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>

Allow me to reply to my own thread, for the benefit of any others who might want to invoke a BPEL WS from APEX facing the same problem:
Apex does not seem to like asynchronous BPEL processes so the trick is to make a synchronous BPEL process call the asynchronous BPEL process.

How to track error message when calling Transaction: va02

Hi all,
    As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
    Now I want to know:
   1. how to track the error messages
   2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.

Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
                 USING g_t_bdcdata
                 MODE g_l_mode
                 UPDATE 'S'
                 MESSAGES INTO g_t_msg          .
errors will be stpored in the table g_t_msg ..
Thanks .

ORA-06553: PLS-908 when calling 10g remote procedure from 11g database

Hi,
I have 2 instances: 11g (11.1.0.7) and 10g (10.2.0.4). When I try to call 10g (remote) procedure from 11g database, there is errors:
ORA-04052: error occurred when looking up remote object CUSTOMER.PRL_PK2_GENERAL@CUSTOMER_LINK
ORA-06541: PL/SQL: compilation error - compilation aborted
ORA-06553: PLS-908: The stored format ofCUSTOMER.PRL_PK2_GENERAL@CUSTOMER_LINK is not supported...
But, if I call the same procedure from another 10g instance, it's OK.
How can I fix the problem?
Thx,
qtpham

As you can see ,it seems like the workaround that was mentioned there is currently the only way to remove this ORA.
Workaround: Remove the function call(s) from the called subroutine's
package's spec.

ACCESS_VIOLATION at AdobeOwl.dll when call Indesign com interface from windows service

ACCESS_VIOLATION at AdobeOwl.dll when call Indesign CS3 COM interface from windows service application.
Does anyone know how to workaround this issue ?

As AdobeOwl.dll file is missing or corrupted, you need to get a new dll file. Here are the steps to replace setup.dll file
Step 1. You can download missing AdobeOwl.dll here:
http://dllcentral.com/AdobeOwl.dll/1.0.92/download/
Step 2. Paste this file into your system32 or SyWOW64 folder.
Step 3. Navigate to your System32(32Bit OS) or SyWOW64(64Bit OS) Folder.
Note: The location of System32 and SyWOW64 is
C:Windows\System32 (If you are using 32Bit Windows)
C:\Windows\SysWOW64 (if you are using 64Bit Windows)
Step 4. Paste the AdobeOwl.dll file into this folder.
Step 5. Try to run it. It might work now. If not, restart your computer to restore it effectively.

Issue when calling with Facetime video from iphone 6 to iphone 4

Hello,
I am trying to call with facetime video from my iphone 6 (ios 8.0.2) to an iphone 4 (ios 7.1.2) but it doesn't work. It works when I use facetime audio but not the video. I have tried to use my ipad 2 (ios 8.0.2) instead of the iphone 6 and I am experiencing the same problem. Can you please help me out here?
Thnaks!

The iPhone 4 would have to be on wifi for the video to come through, I think. Is the person with the iPhone 4 on wifi?
Can that person receive calls from anyone else using Facetime?
~Lyssa

LOAD_PROGRAM_NOT_FOUND when calling transaction in ECC6 from CRM3.0

Similar Messages

Maybe you are looking for