Load Rule Data Error

Loading a flat file into a cube I created. The error I am getting says "Invalid blank character in name." and in the messages window it says "Failed : 1030010 Invalid blank character in name." Checked the knowledge base with no success, has anybody encountered this error before? The file I am loading is a CSV file, but I have created different flat files with the same data in different file formats with the same result.

Make sure that the full path of the data file does not have any spaces in it...folder name or file name
For instance, if you are trying to load your data file from a folder labeled "Data Files", it won't load since there is a space in the folder name. The same goes for your data file name, try using _ instead of spaces... "Data_Files"
Good Luck
Thanks,
[EssbaseInfo.com|http://essbaseinfo.com/ ]

Similar Messages

Load csv data error:

Load csv data error: ORA-01461: can bind a LONG value only for insert into
LONG column
I am trying to upload a data file (from MS Access) and get the above error message. There is a comment field that is type memo in Access. I have tried using VARCHAR2(4000) and CLOB as the data types but still get the same error. I searched the forum for a workaround or fix but can't seem to find any. Does anybody know of a working solution.
Thanks,

I am trying to load the data through APEX 2.2 for an application that I am building. Using the Excel function for length (on that column), the maximum number of characters comes up 3548. I also tried the clean function but still get the same error when trying to upload the data.

Loading master data : error invalid characters

Hello,
I load master data (example 0PROG_POS) into BW with InfoPackage and loading stops with error "invalid characters". In the logs, the error is due to a special character (in french Ä : a special A).
On BW side, is it possible to solve this problem (I don't understand the message in the help : "If this message appears during a data load, maintain the attribute in the PSA maintenance screens").
My BW is 3.5 patch 7
Thanks in advance for your help.
Daniel.

HI Daniel
all characterstic & special characterstic
goto TCODE: RSKC -> all_capital-> F8
again : rskc-> !"%&'()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXY ->F8
GOTO SE11: RSALLOWEDCHAR (maintain special characterstic)
also u can goto-> SE37->RSKC_ALLOWED_CHAR_GET
-> F8
THANKS & BEST REGARDS
SANGRAM KESHARI SUTAR

Delta loading master data errors in source system Message RSM340 quality

Hi,
I'm trying to load with delta master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !

Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran

Load csv data error: ORA-01461: can bind a LONG value only for insert into

I am trying to upload a data file (from Access) and get the above error message. There is a comment field that is a memo type in Access. I have tried using VARCHAR2(4000) and CLOB as the data types but still get the same error. I searched for the forum for a workaround or fix but there doesn't seem to be any. Does anybody know of a working solution.
Thanks,

Anybody have any ideas?

Load raster data to georaster table error

I use the follow script to load raster data, but get some error,:
---create georaster table
CREATE TABLE city_images (image_id NUMBER, image_description VARCHAR2(50), image MDSYS.SDO_GEORASTER);
--create tablespace
create tablespace rdt_tbs_1 datafile 'D:\product\11.1.0\db\oradata\rdt\rdt_data_01.dbf' size 256m uniform size 4M;
--create RDT table
CREATE TABLE city_images_rdt OF MDSYS.SDO_RASTER
(PRIMARY KEY (rasterID, pyramidLevel, bandBlockNumber,
rowBlockNumber, columnBlockNumber))
TABLESPACE rdt_tbs_1 NOLOGGING
LOB(rasterBlock) STORE AS lobseg
CHUNK 32768
CACHE READS
NOLOGGING
PCTVERSION 0
STORAGE (PCTINCREASE 0)
--赋予访问文件的权限
call dbms_java.grant_permission('MDSYS','SYS:java.io.FilePermission', 'D:\work\raster\image2\Extract_20.img', 'read' );
call dbms_java.grant_permission('PUBLIC','SYS:java.io.FilePermission', 'D:\work\raster\image2\Extract_20.img', 'read' );
--insert data
INSERT INTO city_images VALUES(1,'IMG',SDO_GEOR.INIT('city_images_rdt'));
--load data
DECLARE
geor MDSYS.SDO_GEORASTER;
BEGIN
INSERT INTO city_images values( 1, 'IMG', MDSYS.sdo_geor.init('city_images_rdt') );
SELECT image INTO geor FROM city_images WHERE image_id = 1 FOR UPDATE;
MDSYS.sdo_geor.importFrom(geor,NULL, 'IMG', 'file', 'D:\work\raster\image2\Extract_20.img');
UPDATE city_images SET image = geor WHERE image_id = 1;
END;
I use the system user, when I load data. It give me some error like this:ORA-13464: load GeoRaster data error: - Unable to render RenderedOp for this operation. ORA-06512: 在 "MDSYS.MD", line 1723 ORA-06512: 在 "MDSYS.MDERR", line 17 ORA-06512: 在 "MDSYS.SDO_GEOR", line 5006 ORA-06512: 在 line 5

Extract_20.img file has an extension IMG and thus must be in the ERDAS Imagine file format. The GeoRaster loader doesn't support this format and that's why you saw the error mesg. To load img files, you have to use third-party ETL tool for GeoRaster, or otherwise follow the instructions in section 3.3.1 in the georaster 11g developer's guide.
with your scripts, a few recommendations:
1. add "primary key" to you image_id definition (... image_id number PRIMARY KEY ...) when you define city_images table.
you have two identical INSERT stmts, which should have led to a different error mesg because you have a select stmt before the loading stmt.
2. when you create the tablespace for RDTs or add datafile to a tablespace, use "autoextend", for example,
create tablespace tbs_gr1 datafile 't_gr1_1.f'
size 300M reuse autoextend on next 20M;
3. always create user(s) for all such databases, instead of using SYSTEM user.
regards,
jeffrey xie

Data Load rule Sign flip

In this version of Essbase 11.1.2.2.100.2176
the Data Load rule
Data Load Settings
DataLoad Values
Sign flip
On UDA
SignFlip
Dimension Accounts
Doesn’t work.
I've properly set up a UDA called SignFlip in the Accounts Dimension.
I moved a data load rule from a working application in a prior version and it doesn't work in the new version.
I've also started a new dataload rule from scratch.

Used corrected Load rule.

SQL Interface - Error in Loading the data from SQL data source

Hello,
We have been using SQl data source for loading the dimensions and the data for so many years. Even using Essbase 11.1.1.0, it's been quite a while (more than one year). For the past few days,we are getting the below error when trying to load the data.
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]CURSOR IDENTIFIED IN FETCH OR CLOSE STATEMENT
IS NOT OPEN (DIAG INFO: ).]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021014)
ODBC Layer Error: Native Error code [4294966795]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1003050)
Data Load Transaction Aborted With Error [7]
[Mon Jan 10 11:02:56 2011]Local/{App Name}///Info(1013214)
Clear Active on User [Olapadm] Instance [1]
Interestingly, after the job fails thru our batch scheduler environment, when I run the same script that's being used in the batch scheduler, the job completes successfully.
Also, this is first time, I saw this kind of error message.
Appreciate any help or any suggestions to find a resolution. Thanks,

Hii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu.

Error in Loading FIGL data into a standard ODS

Hi,
I have encountered an error when i attempted to load FIGL data into a standard ODS. Below is the error i received:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Second step in the update
Second step in the update
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Initially i discovered a work around wherein i loaded the data into a write optimize ODS. It was successful. However, when i attempted to data mart the data and put it into a standard ODS, the similar error occurred.
Please help me with this problem.
Ramon

Hi,
Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
Thanks,
JituK

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

Error while loading the data from text file

Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.

Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved?

Error while loading the data from ODS to InfoCube

hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwan

Hi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly

Error in loading the data from flatfile

Hello All,
when am loading the data from flat file iam getting error "ERROR4 WHEN LOADING THE EXTERNAL DATA" is it because of mapping in the transferrules or error in the flat file.
Points will be assigned to all helpful answer.
Thanks & Regards
Priya

Hii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu.

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Error loading the data into cube

Hi All,
wen i am loading the data in the ASO Cube its giving warning but i did every thing correct yester day it was loaded correctly buttoday its not loading its giving warning ASO application ignore update to derived cells even i clear the data wats this error
so plz can any one help
Reading Rule SQL Information For Database accdb
Reading Rules From Rule Object For Database accdb
Parallel dataload enabled: [1] block prepare threads, [1] block write threads.
Aggregate storage applications ignore update to derived cells. 29 cells skipped
Data Load Elapsed Time with http://dataldcu.rul : http://0.094 seconds
Database import completed
Output columns prepared: [0]
Thanks
Ram

In ASO cubes you can only load data at level 0 (=leaf level). Every upload to aggregated dimension members are ignored. The warning message "ignore update to derived cells" is meaning that you are trying to load data at node level. As this is not possible with ASO cubes, essbase ignores that data.

Load Rule Data Error

Similar Messages

Maybe you are looking for