Loaded Iso 5 now no + in Calendar = cannot enter event?

I have updated my iPhone with version iOS 5 now I am unable to enter a new event into my calendar. I have tried switching my phone off and restarting but this does not resolve the problem. I have also tried tapping the calendar date to open up the entry fields as on the iPad but this dones not work either. Does anyone know how to resolve this problem?

I have the same issue and it just started.  My Iclous , Mac and Iphone work , Ipad does not.

Similar Messages

  • Cannot enter event in iCal on iPad

    Got new iPad 2
    Got I cloud set up enter events on my Mac And they appear on the iPad (and phone) no worries but I cannot enter any events on the iPad
    Get message "calendar not set" or "event does not belong in that event store"
    Anybody got any ideas on that .....?....
    Pleas e help very frustrated

    I have the same issue and it just started.  My Iclous , Mac and Iphone work , Ipad does not.

  • Cannot enter events in iphone ios7?Y

    Am unable to enter events on iphone calandar (ios 7)

    Hi, David.  
    Thank you for visiting Apple Support Communities.  
    This sounds like your default calendar may be set to an account that provides a similar function to iCloud.  Check for other accounts under Settings > Mail, Contacts, Calendars and see if you have another account that shows calendar syncing on.  You can also check for default calendar under this menu.  
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Cheers, 
    Jason H.  

  • HT4623 Just down loaded ISO 7 now my iTunes will not work

    Can any one help as my iTunes is just blank

    Settings>iTunes & App Stores, be sure you are connected to your itunes account.

  • Cannot enter event time in Calendar 6.0

    I recently updgraded to Mountain Lion, and when I try to enter a new event into Calendar (by double clicking on day, week or month and unchecking all day option), there is no option to enter the specific event time. 
    Also, Calendar is randomnly changing the time of events of synced google calendar events to 19:45.
    Anyone else experience this problem.  Suggestions as how to fix these two problems would be greatly appreciated.
    Thank you.

    I am having the same darn problem. I really dislike this auto feature in Calendar.
    Can anyone help us please?

  • CALENDAR - problem entering events

    Almost (but not every) time I try to enter an event on my BlackBerry Z10 calendar, I get as far as the date and time, but when I tap those tabs, the calendar flashes to the date/time selector screen and then flips back to the main screen. The information I'd entered is lost. The manual doesn't indicate what I might be doing -- or not doing -- to cause this. Any ideas out there?

    Hey DrewSnider,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Do you have any calendars set up for wireless synchronization?  Also when did the issue start?
    Also try following the steps in this KB article: www.blackberry.com/btsc/KB33621
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • "cannot save event. no calendar has been set."  what does this mean and how do i fix it?

    I keep getting the error message when I try to enter a new event or edit an existing event to my calendar:
    "Cannot save event.  No calendar has been set."
    Any ideas on how to fix it?  VERY inconvenient!
    Thanks.
    txwyrick

    Well, there's a lot we don't know ... for example, if you have actually set up a calendar somewhere you're trying to sync to.
    Anyway, with no other information than what you provided, here's a possible troubleshooter:
    iCloud: Troubleshooting iCloud Calendar

  • Lm3s8962 cannot enter debug mode

    Hello,
    I am developing an application on my luminary lm3s8962 with labview for ARM, I have an home made PCB with this ARM and sensors.
    I have 2 PCB's of the same.
    My problem is,
    instead of a 8 MHz crystal I have a 8 MHz oscillator (single ended) so I see that my RTC is not good, I can see this with GPS timing.
    but using timer0 with interval 1 sec and update a counter works good!?
    I tried to make some changes in the startup file with the clock configuration:
            ; set the system clock to run at 50 MHz
            ; SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL |
            ;                SYSCTL_XTAL_8MHZ | SYSCTL_OSC_MAIN);
            LDR        R0, =0x01C00380
            BL        SysCtlClockSet
    Looking in the SysCTL I see other crystal values, like 16 MHz. used value: #define SYSCTL_RCC_XTAL_16MHZ   0x00000540  // 16.0 MHz (USB), instead of 0x380
    I know this is not supported, but I want it to give it a try.
    I build it and flash it, but now my debugger says:
    Cannot enter memory and cannot enter debug mode.
    I did some reading on the internet and it says that because 16 MHz is not supported it goes into deep sleep.
    I don't know if this true..
    My other PCB works fine, this one is not flashed with the wrong clock.
    my question is:
    first priority:
    Can I prevent that my program starts up in my arm, so I can flash it with the good clock configuration. OR
    Can I erase the flash (with out ULINK2) in some way, so that no program starts  up and I can flash my ARM.
    second priority:
    Maybe someone knows how I can get the right RTC with my 8 MHz oscillator, I need a correct clock in ms.
    Thank you in advance,
    Wouter
    Wouter.
    "LabVIEW for ARM guru and bug destroyer"

    Hi Wouter,
    The questions about the flashing can be found via the following link.
    http://www.keil.com/support/man/docs/ulink2/ulink2_su_flashdownloadcfg.htm
    (right click on the target and click on Show Keil uVision)
    About the hardware configuration you can better ask uVision, since they know more about Hardware.
    Maybe this link helps.
    http://www.keil.com/support/man/docs/rlarm/rlarm_ar_config.htm
    Regards,
    Bas van Dijke
    NI Netherlands

  • I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I have had to uninstall itunes so that I could load this version, the PC says it is correctly loaded, but I now cannot open itunes. Advice?

    I get the message 'itunes has encountered a problem and needs to close' when trying to open itunes 11.1.1.11. I had to uninstall itunes so that I could load this version as the update to version 11 kept failing. The PC says 11.1.1.11 is correctly loaded, but I now cannot open itunes. Any advice on how to get itunes working again?

    Hello there, ytnoj.
    Uninstalling and reinstalling iTunes can be a tricky endeavor and must be done in a very specific way. The following Knowledge Base article provides the step-by-step of the process:
    Removing and Reinstalling iTunes and other software components for Windows XP
    https://support.apple.com/kb/HT1925
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have lost my calendar and now I cannot add events to it.  I keep getting cannot save event no calendar has been set.

    I have lost my calendar and now I cannot add events to it.  I keep getting message "cannot save event no calendar has been set."

    Maybe you need to Tap the Calendar Button in the upper left corner of the calendar app and select a calendar in which to add the event.
    Do you have. + sign in the lower right corner of the App? If not go to Settings>iCloud>Calendar>On. If you want to sync the calendar with iCloud, leave it set to on. If not, then set it to Off.
    Or try this of those suggestions don't work.
    Close all app scompletely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT4623 i down loaded ISO 7.0 NOW ISO  7.O.3 & ISO 7.0.4 BOTH FAILED TO LOAD

    I HAVE DOWN LOADED ISO 7.O......NOW I CAN'Y DOWN LOAD ISO 7.03 AND ISO 7.04.
    UPDATES BOTH START TO DOWN BUT THEN THEY BOTH FAIL TO INSTALL .

    Hello dave.peters,
    I would be be concerned too if I was not able to update my iPhone.  If you have not resolved the issue, I recommend following the steps in the article below for an issue like this:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    As always, it is a good idea to create a backup before hand:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have updated my 4s to iOS 7 and now cannot add events to my calendar or create reminders.  How do I fix this?

    I have updated my 4s to iOS 7 and now cannot add events to my calendar or my reminders.  Anyone else having this issue and know how to fix it?

    I have a similar problem in Reminders....there is no + button to add events.  In Calendars it is there.

  • I loaded ios7 and now  cannot swipe delete anymore.

    I loaded ios7 and now cannot swipe delete anymore.

    Well, the information above describes deleting. It doesn't say delete now in mail, it says Trash. In Messages it says delete. You just swipe from right to left now.
    Closing open apps, double tap the home button, the multi-task bar comes up. Put your finger on the thumbnail of the app just above the icon and swipe upwards. App closed!
    See if this helps you.

  • I just upgraded to the new mobile me calendar and now all my calendar entries on iCal have been erased. As I type this the calendar entries are still on the mobile me and iphone calendars. How do I restore the calendar entries to iCal?

    I just upgraded to the new mobile me calendar and now all my calendar entries on iCal have been erased. As I type this the calendar entries are still on the mobile me and iphone calendars. How do I restore the calendar entries to iCal?

    Please always post your System details when you have a query. The upgrade to the new MobileMe calendar produces different results, and different problems, with different versions of OSX.
    Snow Leopard: during the upgrade process your iCal calendars should be moved to MobileMe (this can take some time and you have to wait for it to happen). Once done, your iCal reads the calendars from MobileMe so any changes made in either place will be visible immediately. If this has not happened then this Apple Tech Note provides instructions:
    http://support.apple.com/kb/TS3397
    Leopard: when the upgrade is completed iCal on Leopard will not be able to see the MobileMe calendars until an additional process is carried out, detailed in this Apple Tech Note:
    http://support.apple.com/kb/HT4330
    Tiger: iCal on Tiger cannot read the MobileMe calendars, period. The only workaround is to upgrade to Leopard, or Snow Leopard if possible (Intel Mac required).

  • Error while loading shared libraries: libxerces-c.so.26: cannot open shared

    Hi,
    I'm trying to install SRM-MDM Catalog 2.0 under SUSE_LINUX Enterprise Server 10 (x86_64).
    First to all I'm trying to install Server part. So I navigate under the CD installation: /Master_Data_Server/LINUX_X64/MDM/bin/  and then execute ./mds-r.
    The following error appears: error while loading shared libraries: libxerces-c.so.26: cannot open shared object file: No such file or directory.
    libxerces-c.so.26 is located under /Master_Data_Server/LINUX_X64/MDM/lib/
    Could you please help me?
    Thanks in advance!

    Thanks for your comment Shiv, Yes I know that MDM 5.5 is out of standard maintainence but anyway our business scenario requires SRM-MDM 2.0.
    If anyone finds the same error I mentioned, It has been solved using ldconfig -v in the library directory of choice.
    I'd like to ask another issue: Right now We have the following error after executing ./mdis-r or ./mds-r:
    Could not open language resource file "LangStrings/ImportManagerCommon.lang". Try setting the MDM_HOME environment variable.
    Could you please help me how to do if?
    Thanks in advance,
    Edited by: Guillermo Montes on May 5, 2010 4:21 PM
    Edited by: Guillermo Montes on May 5, 2010 4:22 PM

Maybe you are looking for