Loading a webpage within a flash document
Hi, is it possible to load a webpage withing a flash document,
this is what i want to happen, i want the flash to stop animating/looping (i already have that done)
and then instead of opening a seperate page to load a website i want it to load within the swf.
CS4 ActionScript 3
Please help, thanks
yes, you can display html text in an html-enabled textfield but, the html page will probably not display as you expect because of flash textfields support for a limited number of html tags.
Similar Messages
-
Launch PowerPoint from within a Flash Document?
I am new to this and have a question. Is it possible to
launch a PowerPoint file from within a Flash Document? (It can open
either internally or externally)
And, if so, is there a simple way to do it, or can you give
me directions to the proper tutorial section?Hi Nick,
For offline/CD work, you can do this from a Flash Projector
file (see
Publish Settings) and use FlashJester JStart with it
http://jstart.flashjester.com
Download the evaluation copy and see the examples it comes
with.
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple -
Hyperlinking within a flash document
I'm trying to create a link (using CS3) in flash from text in
one SWF file to a specific labeled frame in another SWF in the same
directory. How is this possible?mmm, ok, i appreciate your help, but its still not working.
Here's the actionscript code I created:
SalmonCanBtn.onRelease = function() {
loadMovieNum("select-spacers.swf", 10);
stop();
the idea is to load the movie and jump to frame 10 which is
where the content I need is located. Unfortunately, A) it doesn't
jump to frame 10, it just goes to frame 1, and B) the content is
simply loaded on top of content I already have there. I just want
it to jump to the other swf and leave the SWF from which I clicked
the button behind entirely. -
Load webpage within flash page?
Sorry if this has been answered before, but I'm not sure what
to search under. I have a page made in Flash 8 that is mainly an
animated background and a menu on the bottom. I want to be able to
click one of the buttons on the menu and have a new "window" open
up in the middle of the background area and load the different
webpages (html, etc). Honestly I have no idea where to start on how
to tell the buttons to open up in the new window instead of opening
up in an external link. I have everything else done except for this
last part. I am including a little picture to explain - if it
helps. Thanks!
Main page before click
After click, menu
openedveekay8 wrote:
> Sorry if this has been answered before, but I'm not sure
what to search under.
> I have a page made in Flash 8 that is mainly an animated
background and a menu
> on the bottom. I want to be able to click one of the
buttons on the menu and
> have a new "window" open up in the middle of the
background area and load the
> different webpages (html, etc). Honestly I have no idea
where to start on how
> to tell the buttons to open up in the new window instead
of opening up in an
> external link. I have everything else done except for
this last part. I am
> including a little picture to explain - if it helps.
Thanks!
well, you can't load web page within flash, flash has no
browser capabilities.
you can only load text formatted with basic html tags, but
not an actual html page.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free> -
Delaying Flash Document Loading
I'm working on a site that has multiple small flash documents
within each page, and I was wondering if it is possble to delay the
second .swf from loading until the first one has finished loading
(or playing)? Is there a behavior or code for something like this?
I have preloaders built into both flash documents so they're
supposed to have all the frames loaded before they play, but it
doesn't quite seem to be doing that. The first one is only maybe
35-40 frames long, and once it plays thru it stops on a frame and
stays there. The other doc is a loop and it seems like if the short
one can play first and come to a stop the second might load easier.
Any ideas?> Is there a behavior or
> code for something like this?
No.
How heavy are your Flash elements? That's the problem....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"queenliesel" <[email protected]> wrote in
message
news:eddqsv$no0$[email protected]..
> I'm working on a site that has multiple small flash
documents within each
> page,
> and I was wondering if it is possble to delay the second
.swf from loading
> until the first one has finished loading (or playing)?
Is there a
> behavior or
> code for something like this? I have preloaders built
into both flash
> documents so they're supposed to have all the frames
loaded before they
> play,
> but it doesn't quite seem to be doing that. The first
one is only maybe
> 35-40
> frames long, and once it plays thru it stops on a frame
and stays there.
> The
> other doc is a loop and it seems like if the short one
can play first and
> come
> to a stop the second might load easier. Any ideas?
> -
I have a FLA that worked fine in CS5, I have copies of the file going back 6 months. Every file I open gives me this error: Could not load scene into memory. Your document may be damaged.
How could every fla I've backed up give the same error? They all worked fine in CS5. Does anyone know of a fix? Or do I have to go back to CS5?
Thanks!I reinstalled Flash Pro CS5 and it opens up all my FLA's (of the same project) perfectly. But Flash Pro CS5.5 gives me this error: Could not load scene into memory. Your document may be damaged.
So is CS5.5 unusable?
cheeres. -
Hi. Please can anyone show me how to install a flash document / movie into a powerpoint presentation so that the animation plays within the powerpoint? Thanks
wouldn't it make more sense that a flashtard is someone who
just generally sucks at flash and asks idiotic questions?
anyway, so i pretty much got the banner done - but i'm stuck
on one problem. I made a motion clip of a heart, and i want the
heart to fall from top to bottom, following a squiggly motion
guide, and to rotate 1/4 turn on the way. I got it as far as
following the motion guide, but when i try to select the instance
in the first frame and rotate it, shouldn't the motion tween make
it appear to slowly rotate, rather than stay put then rotate 1/4
turn at the last frame? When I select the clip and play around with
alpha and stuff, that works fine. What the heck? -
Hi all, I've been working on a project in Flash Professional CC in windows 7 that was started in a previous version of Flash Pro and occasionally after I've saved the project and tried to open it the next day I get the "Could not load scene into memory. Your document may be damaged." message and only a blank Scene 2 in the project. I've previously been reverting back to the old saved project file and starting over. Its wasted a lot of time so far.
I can still open the same exact project in CS6 on another older computer but not in CC. I can also save the fla in CS6, transfer it to the other computer and then it will work again (for now). This isn't going to be an option in the future as CS6 was a trial version that is on its last use today.
I've tried to create a new flash pro cc project and just copied and pasted the library and scene layout from the old project into the new project. This worked for a couple of saves/ opens but the error has happened again. I'm scared that now that I've reached the point in the project were my work in the animation/ visual side will start to be more intensive that I will continuosly have to worry about losing all of my work. I'm using a document class so the AS3 code hasn't been an issue thankfully. Any help would be appreciated.Thanks for the reply Amy, that is essentially what I am doing already only I'm not using version control software I'm just managing it on my own since its a solo project, though I have been considerring using git anyway. It still doesn't explain why I can open and save the supposedly damaged project (according to CC) in CS6 and only then will it work again in CC. Also I'm not gettting a chance to save as a new version over and over for long. Its only a couple of days max, usually just over one day, and I've primarily been working on the code in Flash Builder with little functional change in the actual fla project. Its primarily changing movieclips instance names, which in this project is tedious and time consuming. Having to revert back to the older working version is exaclty what I'm trying to avoid. I shouldn't have to commit the project to a repository every little change that I make to the fla file.
-
Flash CS5 Could not load scene into memory. Your document may be damaged.
Hello everyone!
Just bought the new CS5 Flash and was eager to begin my first document. I opened a new document Saved As to begin and then setup my basic page with only one imported graphic. Hit Save and received an error message: Could not load scene into memory. Your document may be damaged. When I closed and reopened the document this same error appears twice in my Output Menu.
I have noticed other people with several of simular issues and am not sure where to start to find an answer. Any help is greatly appreciated.
Thanks in Advance,
Biddler1Thought I'd add to this since I have a file with a similar problem. I'm carrying the files home to work on in the evening. I've noticed at work that when I update an image in the library flash shows me a path going all the way out to the root of the network share and then back to the file. The file is just one folder away. Maybe Flash has recorded an absolute path instead of a relative path to the asset.
At home, Flash can't find the asset at all since it's recorded a non-portable path.
The question is, if the asset has been imported to the project file, why is flash checking the original in the first place? -
I was playing an escalating flash game when it froze my
browser. A flash error window popped up saying "A script is causing
your computer to slow down and it may become unresponsive. Click
yes to terminate the script." I did, but it seems the change was
permanent as many flash documents that use scripts (so mostly
games) won't get past the first tenth of the loading bar.Sorry, no good. I used the administrator version as I suppose I am my own administrator. The appearance was a bit different, the result just the same.
I am beginning to think it is something very elementary and stupid that I am doing. As it is I am just fed up with the whole thing. If I could get it to load on any other brower would change. -
Yosemite: Input freezes when loading webpage with video (flash?)
Just updated to Yosemite, and its impressive. But im having a severe issue where input (mouse and keyboard) freezes for at least 5 seconds whenever I load a webpage in Safari with a video on it. Not sure if its just flash or any video. This did not happen before upgrade.
Im on a late 2013 Macbook pro Retina 13" with Yosemite 10.10
Any suggestions or similar experiences?Try uninstalling Adobe Flash Player, and determine if the web page containing the video you are using really requires it. Most don't.
If, after uninstalling Flash Player you determine you really require it, install it again. That alone may fix the problem. -
Multiple Forms in a Flash Document and Posting Using ASP
Hello everyone!
I have some what of a dilemma on my hands. I am creating
multiple forms in one document using Flash and need them to post
using ASP script. I have been researching this for the last six
days, and I have had NO luck. I have noticed that all the
information that I have found is for one form, not more than one.
What I have so far is the Flash document, with 4 forms. The
basic idea is that a user chooses from a drop down menu (the
combobox) a location, and depending on the location chosen, it
takes the user to another frame in the flash document. The forms
(all their own movie clip) contains a name field, a department
field, and either a manager name a userID field or an employee
number as well as the basic buttons for submitting the form or
resetting the form.
So far what I have working is the drop down menu (combobox)
taking me to the proper frame and it shows the appropriate form.
The reset button clearing the form (deleting any information that I
have imputed into the input fields), but I have absolutely NO idea
how to get the submit button to work (I did manage to get it to
send me a message if there was nothing in one of the input fields),
and NO idea how to get the information to the ASP file.
Where there are 4 forms do each of them have to have their
own ASP file attached to them, or can I use one?
If anyone knows a site that deals with multiple forms in one
SWF and posts using ASP that would be greatly appreciated, or if
you know some actionscript that could be helpful.
Thank you all in advance.That would be part of my problem, I really don't know ASP,
and I am flying by the seat of my pants.
The current script I have for the ASP file is:
<% @Language = "VBScript" %>
<%
Option explicit
Dim strfullName
Dim strdeptName
Dim strmanagerName
Dim strobjeemail
Dim strlocation
strfullName.Request.Form("fullName_txt")
strdeptName.Request.Form("deptName_txt")
strmanagerName.Request.Form("managerName_txt")
strlocation.Request.Form("locationName")
Set strobjemail = CreateObject("CDO.Message")
strobjemail.From = "[email protected]"
strobjemail.To = "[email protected]"
strobjemail.Subject = "Program from " + strlocation
strobjemail.Body = "This user has completed this progrmam
from " + strlocation & Chr(13) & Chr(10) & "Name: " +
strfullName & Chr(13) & Chr(10) & "Department: " +
strdeptName & Chr(13) & Chr(10) & + "Manager: " +
strmanagerName
strobjemail.Send
Set strobjemail=nothing
%>
The AS code that I have so far is:
function formValidationChecks(){
if (fullName_txt.length==0){
status_txt.text = "Please enter your Name";
else if (deptName_txt.length==0){
status_txt.text = "Please enter your Department";
else if (managerName_txt.length==0){
status_txt.text = "Please enter your Manager";
else {
status_txt.text = "Thank You!";
variables.fullName_txt = fullName_txt.text;
variables.deptName_txt = deptName_txt.text;
variables.managerName_txt = managerName_txt.text;
varLoader.load(varSend);
trace("-----");
trace("Name: "+fullName_txt.text);
trace("Department: "+deptName_txt.text);
trace("Manager: "+managerName_txt.text);
trace("Form validated");
submit_btn.onRelease = function(){
status_txt.text = "";
if(formValidationChecks()){
var lv = new LoadVars();
lv.fullName_txt = form.fullName_txt.text;
lv.deptName_txt = form.deptName_txt.text;
lv.managerName_txt = form.managerName_txt.text;
lv.sendAndLoad("mail.asp", lv, "POST");
reset_btn.onRelease = function()
fullName_txt.text = "";
deptName_txt.text = "";
managerName_txt.text = "";
So far my reset button clears everything, and the submit
button is tracing the content in the form fields, but it's not even
grabbing the asp page.
Any suggestions? Even pages that have tutorials that are in
the form of a video.
Thanks -
MTU Size Problem Loading Certain Webpages
Hello Colleagues,
I'm having a strange problem dealing with MTU sizes and loading certain webpages. I am aware of the default Microsoft MTU of 1500 and also using GRE IPSEC Tunnels recommended at MTU size 1400. I have since manually set some users PC's to MTU of 1400 and most of those users are experiencing no issues. However, there are a few users who still experience website loading issues even though I have manually changed their MTU size to 1400.
These are domain accounts will the same image loads on their machines, so all have the same permissions, rights, firewall settings, etc. They all use the same LAN, switches, and routers.
Here are the router configs, router 1 and router 2
Router 1
Current configuration : 9006 bytes
version 15.3
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname R-US-RS-WVPN1
boot-start-marker
boot system flash:c1900-universalk9-mz.SPA.153-1.T1.bin
boot system flash:c1900-universalk9-mz.SPA.151-3.T1.bin
boot-end-marker
logging buffered 64000
enable secret 5 *removed*
no aaa new-model
clock timezone CET 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 303
ip cef
ip domain name corp.com
ip name-server 10.###.8.21
ip name-server 10.###.8.96
ip inspect dns-timeout 90
ip inspect tcp idle-time 60
ip inspect name fw smtp timeout 120
ip inspect name fw ftp timeout 120
ip inspect name fw realaudio
ip inspect name fw tftp timeout 30
ip inspect name fw udp timeout 30
ip inspect name fw tcp timeout 60
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-316595902
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-316595902
revocation-check none
rsakeypair TP-self-signed-316595902
crypto pki certificate chain TP-self-signed-316595902
certificate self-signed 01
*removed*
quit
license udi pid CISCO1921/K9 sn FTX153182M8
spanning-tree vlan 229 priority 8192
redundancy
ip ssh version 2
crypto isakmp policy 10
hash md5
authentication pre-share
lifetime 3600
crypto isakmp key *removed* address 70.###.172.142
crypto isakmp key *removed* address 184.###.###.254
crypto isakmp keepalive 35 11
crypto ipsec transform-set FY-WVPN-Tunnel esp-aes esp-md5-hmac
mode tunnel
crypto map vpn 10 ipsec-isakmp
set peer 70.###.172.142
set peer 184.###.###.254
set transform-set FY-WVPN-Tunnel
match address gre-tunnel-list
interface Loopback0
ip address 10.###.0.10 255.255.255.255
interface Tunnel2291
description Primary-TimewarnerTelecom-Ral-FayWVPN1
ip address 10.###.99.26 255.255.255.252
no ip redirects
cdp enable
tunnel source 66.###.161.126
tunnel destination 184.###.###.254
crypto map vpn
interface Tunnel2293
description Primary-TimewarnerTelecom-Ral-FayWVPN2
ip address 10.###.99.154 255.255.255.252
no ip redirects
cdp enable
tunnel source 66.###.161.126
tunnel destination 70.###.172.142
crypto map vpn
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description TW Telecom/DMVPN1
ip address 66.###.161.126 255.255.255.252
ip access-group Block-Internet in
ip access-group Block-Internet out
duplex auto
speed auto
no cdp enable
crypto map vpn
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0/0
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/1
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/2
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/3
description PBX Eth1
switchport access vlan 229
no ip address
interface Vlan1
no ip address
shutdown
interface Vlan229
ip address 10.###.229.253 255.255.255.0
ip helper-address 10.###.231.201
standby 229 ip 10.###.229.254
standby 229 priority 105
standby 229 preempt
router eigrp 100
network 10.0.0.0
ip forward-protocol nd
no ip http server
ip http secure-server
ip route 70.###.172.142 255.255.255.255 66.###.161.125
ip route 184.###.###.254 255.255.255.255 66.###.161.125
ip route 205.###.96.180 255.255.255.252 66.###.161.125
ip access-list extended Block-Internet
permit esp host 66.###.161.126 host 184.###.###.254
permit esp host 184.###.###.254 host 66.###.161.126
permit udp host 66.###.161.126 host 184.###.###.254 eq isakmp
permit udp host 184.###.###.254 host 66.###.161.126 eq isakmp
permit esp host 66.###.161.126 host 70.###.172.142
permit esp host 70.###.172.142 host 66.###.161.126
permit udp host 66.###.161.126 host 70.###.172.142 eq isakmp
permit udp host 70.###.172.142 host 66.###.161.126 eq isakmp
permit icmp host 66.###.161.126 host 184.###.###.254
permit icmp host 184.###.###.254 host 66.###.161.126
permit icmp host 66.###.161.126 host 70.###.172.142
permit icmp host 70.###.172.142 host 66.###.161.126
permit icmp any any echo-reply
permit icmp any any time-exceeded
permit icmp any any packet-too-big
permit icmp any any traceroute
permit icmp any any unreachable
deny ip any any
deny icmp any any
ip access-list extended gre-tunnel-list
permit gre host 66.###.161.126 host 184.###.###.254
permit gre host 66.###.161.126 host 70.###.172.142
logging host 10.100.###.254
logging host 10.100.###.246
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community P_RW RW
snmp-server community P_RO RO
snmp-server enable traps entity-sensor threshold
snmp-server host 10.100.###.246 public
snmp-server host 10.100.###.254 public
access-list 20 permit 10.###.9.3
access-list 20 permit 10.###.8.16
access-list 20 permit 10.100.###.249
access-list 20 permit 10.100.###.254
access-list 20 permit 10.100.###.246
control-plane
banner motd ^CCCCCCC
****************** Warning! Warning! Warning! ********************
This system is restricted to authorized users for business
purposes. Unauthorized access is a violation of the law. This
service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring
****************** Warning! Warning! Warning! ********************
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
line vty 5 15
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
scheduler allocate 20000 1000
ntp server 10.###.8.8 prefer
ntp server 10.###.231.200 prefer
ntp server 10.###.8.69
ntp server 10.###.1.6 prefer
end
Router 2
Current configuration : 9013 bytes
version 15.3
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname R-US-RS-WVPN2
boot-start-marker
boot system flash:c1900-universalk9-mz.SPA.153-1.T1.bin
boot system flash:c1900-universalk9-mz.SPA.151-3.T1.bin
boot-end-marker
logging buffered 64000
logging console critical
enable secret 5 *removed*
no aaa new-model
clock timezone CET 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 303
ip cef
ip domain name corp.mann-hummel.com
ip name-server 10.###.8.21
ip name-server 10.###.8.96
ip inspect dns-timeout 90
ip inspect tcp idle-time 60
ip inspect name fw smtp timeout 120
ip inspect name fw ftp timeout 120
ip inspect name fw realaudio
ip inspect name fw tftp timeout 30
ip inspect name fw udp timeout 30
ip inspect name fw tcp timeout 60
ipv6 multicast rpf use-bgp
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-3179596086
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3179596086
revocation-check none
rsakeypair TP-self-signed-3179596086
crypto pki certificate chain TP-self-signed-3179596086
certificate self-signed 01
*removed*
quit
license udi pid CISCO1921/K9 sn FTX153182M2
spanning-tree vlan 229 priority 1###84
redundancy
ip ssh version 2
crypto isakmp policy 10
hash md5
authentication pre-share
lifetime 3600
crypto isakmp key *removed* address 70.###.172.142
crypto isakmp key *removed* address 184.###.###.254
crypto isakmp keepalive 35 11
crypto ipsec transform-set Fay-Ral-WVPN-Tunnel esp-aes esp-md5-hmac
mode tunnel
crypto map vpn 10 ipsec-isakmp
set peer 184.###.###.254
set peer 70.###.172.142
set transform-set Fay-Ral-WVPN-Tunnel
match address gre-tunnel-list
interface Loopback0
ip address 10.###.0.12 255.255.255.255
interface Tunnel2292
description Failover-TimewarnerCable-Ral-Fay-WVPN2
ip address 10.###.99.30 255.255.255.252
no ip redirects
cdp enable
tunnel source 96.###.25.226
tunnel destination 184.###.###.254
crypto map vpn
interface Tunnel2294
description Failover-TimewarnerCable-Ral-Fay-WVPN2
ip address 10.###.99.158 255.255.255.252
no ip redirects
cdp enable
tunnel source 96.###.25.226
tunnel destination 70.###.172.142
crypto map vpn
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Fay-Ral WVPN
ip address 96.###.25.226 255.255.255.252
ip access-group Block-Internet in
ip access-group Block-Internet out
duplex auto
speed auto
no cdp enable
crypto map vpn
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/0/0
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/1
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/2
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/3
description PBX Eth2
switchport access vlan 229
no ip address
interface Vlan1
no ip address
shutdown
interface Vlan229
ip address 10.###.229.252 255.255.255.0
ip helper-address 10.###.231.201
standby 229 ip 10.###.229.254
standby 229 preempt
router eigrp 100
network 10.0.0.0
ip forward-protocol nd
no ip http server
ip http secure-server
ip route 70.###.172.142 255.255.255.255 96.###.25.225
ip route 184.###.###.254 255.255.255.255 96.###.25.225
ip route 205.###.96.180 255.255.255.252 66.###.161.125
ip access-list extended Block-Internet
permit esp host 96.###.25.226 host 184.###.###.254
permit esp host 184.###.###.254 host 96.###.25.226
permit udp host 96.###.25.226 host 184.###.###.254 eq isakmp
permit udp host 184.###.###.254 host 96.###.25.226 eq isakmp
permit esp host 96.###.25.226 host 70.###.172.142
permit esp host 70.###.172.142 host 96.###.25.226
permit udp host 96.###.25.226 host 70.###.172.142 eq isakmp
permit udp host 70.###.172.142 host 96.###.25.226 eq isakmp
permit icmp host 96.###.25.226 host 184.###.###.254
permit icmp host 184.###.###.254 host 96.###.25.226
permit icmp host 96.###.25.226 host 70.###.172.142
permit icmp host 70.###.172.142 host 96.###.25.226
permit icmp any any echo-reply
permit icmp any any time-exceeded
permit icmp any any packet-too-big
permit icmp any any traceroute
permit icmp any any unreachable
deny ip any any
deny icmp any any
ip access-list extended gre-tunnel-list
permit gre host 96.###.25.226 host 184.###.###.254
permit gre host 96.###.25.226 host 70.###.172.142
logging host 10.100.###.254
logging host 10.100.###.246
snmp-server community P_RW RW
snmp-server community P_RO RO
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server enable traps entity-sensor threshold
snmp-server host 10.100.###.246 public
snmp-server host 10.100.###.254 public
access-list 20 permit 10.###.9.3
access-list 20 permit 10.###.8.16
access-list 20 permit 10.100.###.249
access-list 20 permit 10.100.###.254
access-list 20 permit 10.100.###.246
control-plane
banner motd ^CCCCCC
****************** Warning! Warning! Warning! ********************
This system is restricted to authorized users for business
purposes. Unauthorized access is a violation of the law. This
service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring
****************** Warning! Warning! Warning! ********************
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
line vty 5 15
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
scheduler allocate 20000 1000
ntp server 10.###.8.8 prefer
ntp server 10.###.231.200 prefer
ntp server 10.###.8.69
ntp server 10.###.1.6 prefer
endUPDATE
I have since applied the following config to the tunnel interfaces:
ip mtu 1400
ip tcp adjust-mss 1400
tunnel path-mtu-discovery
This worked and I was able to reset each users PC to default MTU size of 1500, but only until just now. I got a call from a user who explained that he wasn't able to reach some websites, again.
Sure enough, I've just confirmed that all of the users are unable to access the websites any longer.
This is crazy, does anyone have any ideas? -
How to encapsulate two games in a new flash document
Hi mates!
Now that I have my first two games I want to encapsulate them in a new document!
Here is my idea:
Create a new document with 4 keyframes in the main timeline.
The first one will accommodate the title and two "play" buttons (each allowing to play a game).
The second one will contain the first game.
The third one will contain the second game.
The last keyframe will contain the scores.
Each game contains a movieclip that is being controlled by a main class that I wrote using as3.0. For example imagine that one of the games is a simple rectangle that the user moves with the arrow keys. The motion code is inside the main document class. The second game is something similar.
So, how do I "import" the games (that were developed totally independent of each other ) to the keyframes of my new flash document?
Could you help me?
Thanks in advanceImporting the swf's will destroy any actionscript they have. You'll need to copy the timelines of the games into movieclips in your other file.
You might instead consider just loading the games dynamically, making the main file more of a loading/summary platform that you use to communicate with the loaded games. This approach would likely allow you to easily add even more games as long as you have a similar communication scheme established. -
Hey folks,
we've been getting this problem a lot. We had it in Flash CS5.5 and still have it CS6.
We're animating a series in Flash and this problem keeps cropping up way to often, but seems totally random.
Basically I'll be working on a .fla saving regular versions through out the day, no problems. I'll close the file down. Then I (or someone else on a different computer) will open it up and I'll get the error msg "Could not load scene into memory. Your document may be damaged." Everything will be fine except for a few missing graphic symbols. Sometimes just the one, sometimes a whole bunch. So where the symbol should be on the stage, instead you get a small white square, but it still contains the animation information. So it will still move about the stage. If I bring in the same symbol from an old scene I can swap them out and the problem is fixed, (until it does it again on a totally different graphic symbol).
If i select the symbol in the library the preview is white/blank and i can't go into it to edit. When I select the symbol on the stage, the "instance of:" gives me a blank "_ _ _" in the properties tab. How ever if i right click show in library it does show me the correct (although broken as in blank) symbol in the library.
I havent been able to reproduce this problem on purpose but I'd say it happens in roughly one scene out of 10. Its seems to happen at random, I know there must be something in common but i havent figured out what. Its going on in heavy scenes (large library multipule characters), lite scenes (just the one character). Its not like it happens to the same symbol, different ones each time. Everything is local to the scene, all elements are created in flash. We are working across a network but as everything is local to the scene i don't see how that would be a problem. Also we don't have duplicate named symbols. It also won't necessarily affect something that has been changed since the last version. could be a background element thats been there, untouched since the first version of the scene.
One point on how we set up our scenes which may be relevant. Start with empty scene, copy and paste symbols from other scenes to populate. Save.
The problem could appear on say version 4 or version 36. Older versions are usually fine.
So to sum up. Flash file is fine when we save it, open it up again later and a symbol will have disappeared. It's happening far too often.
I know how to fix the problem, thats not what I'm asking. I need to know WHY its doing it so we can stop this from happening in the first place.
Phew! Thanks for reading this far. Any help would be highly appreciated.
Sander/Can you elaborate on how you use the network? Are you working from FLA/XFLs stored on a machine across a network (and saving them across the network)? I had plenty of those issues and Adobe has always warned not to work across a network. I just fell into the habit of copying over what I need to work on locally, then updating the file servers at the end of the day. Nothing was corrupt after that.
Also lately in CS5.5 (not CS6 yet) I had noticed that I could change some graphics assets, close the document in OS X and open in Windows only to find freshly updated graphics reverted back. What's even more odd is if the OS X machine that made the changes opens it the changes are still made. This happens vice versa as well. My only solution on that was not to work cross-platform with other machines on a network unless absolutely necessary.
Maybe you are looking for
-
Swing Timer issues on a faster machine.
Hi everyone, I'm having some trouble using Swing Timers. I have built a system which uses three javax.swing.Timers, these are as follows: timerLeft = new Timer(timerDelay, new ActionListener() { public void actionPerformed(ActionEvent evt) {if(pathPo
-
Example Basicresponse: HTTP Error 403 - Forbidden
Hi, i installed the developer edition of ocms. The eclipse plugin works fine. I was able to deploy the "thirdpartycallcontrol" and to access it via http://localhost:8888/tpcc. BUT the basicresponse example does not work. I can deploy it but on http:/
-
I would like to know if buying oracle lite licenses for our remote users than I have to pay the same number of licenses for Enterprise database server which synchronizes data with Olite via Mobile Server. For example : With 1000 remote users (with 10
-
hi gurus can any body explain me the mdm post install steps. in my laptop i have installed 1) mdm server 2) mdm import server 3) mdm syndication server 4) database(oracle) 5) mdm console 6) mdm data manager 7 ) mdm import manager 8 ) mdm syndication
-
Does anyone know if/how one can change the date format for Aperture 3? Right now, all date related metadata is displaying in short format, like this: [Jul 16]. I'd like it to be able to change it to long, full, or medium so the year displays as well.