MTU Size Problem Loading Certain Webpages

Hello Colleagues,
I'm having a strange problem dealing with MTU sizes and loading certain webpages. I am aware of the default Microsoft MTU of 1500 and also using GRE IPSEC Tunnels recommended at MTU size 1400. I have since manually set some users PC's to MTU of 1400 and most of those users are experiencing no issues. However, there are a few users who still experience website loading issues even though I have manually changed their MTU size to 1400.
These are domain accounts will the same image loads on their machines, so all have the same permissions, rights, firewall settings, etc. They all use the same LAN, switches, and routers.
Here are the router configs, router 1 and router 2
Router 1
Current configuration : 9006 bytes
version 15.3
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname R-US-RS-WVPN1
boot-start-marker
boot system flash:c1900-universalk9-mz.SPA.153-1.T1.bin
boot system flash:c1900-universalk9-mz.SPA.151-3.T1.bin
boot-end-marker
logging buffered 64000
enable secret 5 *removed*
no aaa new-model
clock timezone CET 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 303
ip cef
ip domain name corp.com
ip name-server 10.###.8.21
ip name-server 10.###.8.96
ip inspect dns-timeout 90
ip inspect tcp idle-time 60
ip inspect name fw smtp timeout 120
ip inspect name fw ftp timeout 120
ip inspect name fw realaudio
ip inspect name fw tftp timeout 30
ip inspect name fw udp timeout 30
ip inspect name fw tcp timeout 60
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-316595902
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-316595902
revocation-check none
rsakeypair TP-self-signed-316595902
crypto pki certificate chain TP-self-signed-316595902
certificate self-signed 01
*removed*
        quit
license udi pid CISCO1921/K9 sn FTX153182M8
spanning-tree vlan 229 priority 8192
redundancy
ip ssh version 2
crypto isakmp policy 10
hash md5
authentication pre-share
lifetime 3600
crypto isakmp key *removed* address 70.###.172.142
crypto isakmp key *removed* address 184.###.###.254
crypto isakmp keepalive 35 11
crypto ipsec transform-set FY-WVPN-Tunnel esp-aes esp-md5-hmac
mode tunnel
crypto map vpn 10 ipsec-isakmp
set peer 70.###.172.142
set peer 184.###.###.254
set transform-set FY-WVPN-Tunnel
match address gre-tunnel-list
interface Loopback0
ip address 10.###.0.10 255.255.255.255
interface Tunnel2291
description Primary-TimewarnerTelecom-Ral-FayWVPN1
ip address 10.###.99.26 255.255.255.252
no ip redirects
cdp enable
tunnel source 66.###.161.126
tunnel destination 184.###.###.254
crypto map vpn
interface Tunnel2293
description Primary-TimewarnerTelecom-Ral-FayWVPN2
ip address 10.###.99.154 255.255.255.252
no ip redirects
cdp enable
tunnel source 66.###.161.126
tunnel destination 70.###.172.142
crypto map vpn
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description TW Telecom/DMVPN1
ip address 66.###.161.126 255.255.255.252
ip access-group Block-Internet in
ip access-group Block-Internet out
duplex auto
speed auto
no cdp enable
crypto map vpn
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/0/0
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/1
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/2
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/3
description PBX Eth1
switchport access vlan 229
no ip address
interface Vlan1
no ip address
shutdown
interface Vlan229
ip address 10.###.229.253 255.255.255.0
ip helper-address 10.###.231.201
standby 229 ip 10.###.229.254
standby 229 priority 105
standby 229 preempt
router eigrp 100
network 10.0.0.0
ip forward-protocol nd
no ip http server
ip http secure-server
ip route 70.###.172.142 255.255.255.255 66.###.161.125
ip route 184.###.###.254 255.255.255.255 66.###.161.125
ip route 205.###.96.180 255.255.255.252 66.###.161.125
ip access-list extended Block-Internet
permit esp host 66.###.161.126 host 184.###.###.254
permit esp host 184.###.###.254 host 66.###.161.126
permit udp host 66.###.161.126 host 184.###.###.254 eq isakmp
permit udp host 184.###.###.254 host 66.###.161.126 eq isakmp
permit esp host 66.###.161.126 host 70.###.172.142
permit esp host 70.###.172.142 host 66.###.161.126
permit udp host 66.###.161.126 host 70.###.172.142 eq isakmp
permit udp host 70.###.172.142 host 66.###.161.126 eq isakmp
permit icmp host 66.###.161.126 host 184.###.###.254
permit icmp host 184.###.###.254 host 66.###.161.126
permit icmp host 66.###.161.126 host 70.###.172.142
permit icmp host 70.###.172.142 host 66.###.161.126
permit icmp any any echo-reply
permit icmp any any time-exceeded
permit icmp any any packet-too-big
permit icmp any any traceroute
permit icmp any any unreachable
deny   ip any any
deny   icmp any any
ip access-list extended gre-tunnel-list
permit gre host 66.###.161.126 host 184.###.###.254
permit gre host 66.###.161.126 host 70.###.172.142
logging host 10.100.###.254
logging host 10.100.###.246
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community P_RW RW
snmp-server community P_RO RO
snmp-server enable traps entity-sensor threshold
snmp-server host 10.100.###.246 public
snmp-server host 10.100.###.254 public
access-list 20 permit 10.###.9.3
access-list 20 permit 10.###.8.16
access-list 20 permit 10.100.###.249
access-list 20 permit 10.100.###.254
access-list 20 permit 10.100.###.246
control-plane
banner motd ^CCCCCCC
****************** Warning! Warning! Warning! ********************
This system is restricted to authorized users for business
purposes. Unauthorized access is a violation of the law. This
service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring
****************** Warning! Warning! Warning! ********************
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
line vty 5 15
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
scheduler allocate 20000 1000
ntp server 10.###.8.8 prefer
ntp server 10.###.231.200 prefer
ntp server 10.###.8.69
ntp server 10.###.1.6 prefer
end
Router 2
Current configuration : 9013 bytes
version 15.3
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname R-US-RS-WVPN2
boot-start-marker
boot system flash:c1900-universalk9-mz.SPA.153-1.T1.bin
boot system flash:c1900-universalk9-mz.SPA.151-3.T1.bin
boot-end-marker
logging buffered 64000
logging console critical
enable secret 5 *removed*
no aaa new-model
clock timezone CET 1 0
clock summer-time CET recurring last Sun Mar 2:00 last Sun Oct 3:00
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause rootguard
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery interval 303
ip cef
ip domain name corp.mann-hummel.com
ip name-server 10.###.8.21
ip name-server 10.###.8.96
ip inspect dns-timeout 90
ip inspect tcp idle-time 60
ip inspect name fw smtp timeout 120
ip inspect name fw ftp timeout 120
ip inspect name fw realaudio
ip inspect name fw tftp timeout 30
ip inspect name fw udp timeout 30
ip inspect name fw tcp timeout 60
ipv6 multicast rpf use-bgp
no ipv6 cef
multilink bundle-name authenticated
crypto pki trustpoint TP-self-signed-3179596086
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3179596086
revocation-check none
rsakeypair TP-self-signed-3179596086
crypto pki certificate chain TP-self-signed-3179596086
certificate self-signed 01
*removed*
        quit
license udi pid CISCO1921/K9 sn FTX153182M2
spanning-tree vlan 229 priority 1###84
redundancy
ip ssh version 2
crypto isakmp policy 10
hash md5
authentication pre-share
lifetime 3600
crypto isakmp key *removed* address 70.###.172.142
crypto isakmp key *removed* address 184.###.###.254
crypto isakmp keepalive 35 11
crypto ipsec transform-set Fay-Ral-WVPN-Tunnel esp-aes esp-md5-hmac
mode tunnel
crypto map vpn 10 ipsec-isakmp
set peer 184.###.###.254
set peer 70.###.172.142
set transform-set Fay-Ral-WVPN-Tunnel
match address gre-tunnel-list
interface Loopback0
ip address 10.###.0.12 255.255.255.255
interface Tunnel2292
description Failover-TimewarnerCable-Ral-Fay-WVPN2
ip address 10.###.99.30 255.255.255.252
no ip redirects
cdp enable
tunnel source 96.###.25.226
tunnel destination 184.###.###.254
crypto map vpn
interface Tunnel2294
description Failover-TimewarnerCable-Ral-Fay-WVPN2
ip address 10.###.99.158 255.255.255.252
no ip redirects
cdp enable
tunnel source 96.###.25.226
tunnel destination 70.###.172.142
crypto map vpn
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description Fay-Ral WVPN
ip address 96.###.25.226 255.255.255.252
ip access-group Block-Internet in
ip access-group Block-Internet out
duplex auto
speed auto
no cdp enable
crypto map vpn
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/0/0
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/1
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/2
switchport access vlan 229
no ip address
interface GigabitEthernet0/0/3
description PBX Eth2
switchport access vlan 229
no ip address
interface Vlan1
no ip address
shutdown
interface Vlan229
ip address 10.###.229.252 255.255.255.0
ip helper-address 10.###.231.201
standby 229 ip 10.###.229.254
standby 229 preempt
router eigrp 100
network 10.0.0.0
ip forward-protocol nd
no ip http server
ip http secure-server
ip route 70.###.172.142 255.255.255.255 96.###.25.225
ip route 184.###.###.254 255.255.255.255 96.###.25.225
ip route 205.###.96.180 255.255.255.252 66.###.161.125
ip access-list extended Block-Internet
permit esp host 96.###.25.226 host 184.###.###.254
permit esp host 184.###.###.254 host 96.###.25.226
permit udp host 96.###.25.226 host 184.###.###.254 eq isakmp
permit udp host 184.###.###.254 host 96.###.25.226 eq isakmp
permit esp host 96.###.25.226 host 70.###.172.142
permit esp host 70.###.172.142 host 96.###.25.226
permit udp host 96.###.25.226 host 70.###.172.142 eq isakmp
permit udp host 70.###.172.142 host 96.###.25.226 eq isakmp
permit icmp host 96.###.25.226 host 184.###.###.254
permit icmp host 184.###.###.254 host 96.###.25.226
permit icmp host 96.###.25.226 host 70.###.172.142
permit icmp host 70.###.172.142 host 96.###.25.226
permit icmp any any echo-reply
permit icmp any any time-exceeded
permit icmp any any packet-too-big
permit icmp any any traceroute
permit icmp any any unreachable
deny   ip any any
deny   icmp any any
ip access-list extended gre-tunnel-list
permit gre host 96.###.25.226 host 184.###.###.254
permit gre host 96.###.25.226 host 70.###.172.142
logging host 10.100.###.254
logging host 10.100.###.246
snmp-server community P_RW RW
snmp-server community P_RO RO
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server community a RW 20
snmp-server community r RO 20
snmp-server enable traps entity-sensor threshold
snmp-server host 10.100.###.246 public
snmp-server host 10.100.###.254 public
access-list 20 permit 10.###.9.3
access-list 20 permit 10.###.8.16
access-list 20 permit 10.100.###.249
access-list 20 permit 10.100.###.254
access-list 20 permit 10.100.###.246
control-plane
banner motd ^CCCCCC
****************** Warning! Warning! Warning! ********************
This system is restricted to authorized users for business
purposes. Unauthorized access is a violation of the law. This
service may be monitored for administrative and security reasons.
By proceeding, you consent to this monitoring
****************** Warning! Warning! Warning! ********************
^C
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
line vty 5 15
exec-timeout 60 0
password 7 *removed*
login local
transport input ssh
scheduler allocate 20000 1000
ntp server 10.###.8.8 prefer
ntp server 10.###.231.200 prefer
ntp server 10.###.8.69
ntp server 10.###.1.6 prefer
end

UPDATE
I have since applied the following config to the tunnel interfaces:
ip mtu 1400
ip tcp adjust-mss 1400
tunnel path-mtu-discovery
This worked and I was able to reset each users PC to default MTU size of 1500, but only until just now. I got a call from a user who explained that he wasn't able to reach some websites, again.
Sure enough, I've just confirmed that all of the users are unable to access the websites any longer.
This is crazy, does anyone have any ideas?

Similar Messages

Unable to load certain webpages

Hi,
I recently bought a Linksys Wireless-G ADSL Home Gateway (WAG200G) and it works almost perfectly.
The problem is that i'm not able to load certain webpages which before I could.
I think (not enough knowledge to be sure) that it seems to be pages which are build up from a database. For instance: monsterboard (and other vacancy webpages) but also newspages (i.e. NOS.nl, since I live in Holland one of the pages I used to checked frequently).
I have already tried asigning DNS-servers from my ISP (tip from a friend) but that doesn't work.
Does anybody have an idea what the problem might be??
Thnx in advance,
Mike

I finaly solved the problem. Not sure if it was the firmware upgrade, or the addition of a default gateway (the router IP address) in the advanced TCP/IP configuration tab of the Ethernet conection (not sure if it was there before I came back to the DSL modem and chaged the configuration)

Problem loading certain websites

For the past year or so, my iMac has (running Mac OS X 10.5.8) has been giving me trouble when it comes to loading certain websites. The reason why I think it's my computer as opposed to my browser or my internet connection is because these websites will load on other computers connected to the wireless network in my home, and because the problem persists with any browser I attempt to use - I've tried Google Chrome, Firefox and Safari and none of them load these websites. (Also, they load fine when I'm on the internet via my iPod touch.)
The websites in question include about.com, ehow.com, and any website with a .me extension. There are others, but those are the three that come to mind at the moment. When I try to go on about.com for example, the page simply does not load. There's not even an attempt to load the page. It's very frustrating because I see no reason why these websites shouldn't work.
I have tried clearing the caches, history and preferences for all browsers, as well as logging in as a different user on my computer and seeing if these websites worked - they didn't work, even as a different user. I was told it could be a problem with the .plist files, so I dragged all of them into the trash and tried loading these webpages, but it still didn't work. Does anyone know what else it could be? Also, I apologize if my description of the problem was unclear.

Some other things you can try:
1. Run Software Update (in the Apple Menu) and make sure you have all available Apple updates for OS X.
2. Go to Adobe.com and make sure you have the latest versions of Shockwave and Flash for your computer installed.
3. Go to System Preferences > Parental Controls and see if any restrictions have been established.
4. Go to System Preferences > Accounts and set up a new user account. Try using your browsers from this account. If they work, there is a problem with your "old" account. Next steps will depend on how much time and effort you're willing to devote to troubleshooting.
5. Power cycle your router and computer.
6. Go to System Preferences > Network. Highlight your router (assuming you're using a wireless connection) and select the "TCP/IP" panel. Click on the "Renew DHCP Lease" button.
Message was edited by: inandoutofgrace

Problems loading certain web pages

Lately, in the past week or two, I have been noticing that Safari wont load certain web pages. It jsut stops and then I get a blank white page with no error message. I have noticed this mostly with Facebook, but also found the same problems with Evite.com when I click the login link. I have tried using Firefox and it seems to d better, especially with Facebook, but it did hang up on it one time. I cant get to the login page on Evite with either browser. I am using OpenDNS, but dont have these things blocked. I can access them fine from a PC laptop through the same connection via my wireless modem.

Carolyn Samit wrote:
HI,
*I cant get to the login page on Evite with either browser*
Open Keychain Access (Applications/Utiities). Select Passwords on the left then delete the Evite under Names on the right. Launch Safari or Firefox, go to the Evite site and login. After typing in your password, click Always Allow
I opened Keychain, but there is nothing in there for Evite under passwords?
Try Safari Maintenance
Repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Tried this, but still having problems in both Safari and Firefox. Facebook seems to be random, more often not working than it is. Still no login page with Evite?

Having problems loading certain sites

hi i am having problems with certain web pages. i can load up any web page but have problems when clicking on something with in the page that opens a new window. the window is displayed but loads up no images or text and says done in the bottom left hand corner. this means i can not use online banking or any of my other accounts online. any help would be greatly appreciated. as i cant think of what is coursing the problem. i have avg protection on my laptop and windows firewall.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Problems seeing certain webpages

Hi, I am having trouble seeing all the information on certain webpages. For example, on the first link below, all I can see is where it says "Oncogene" at the top, on the second link all I can see are a few trees at the top and the “BC Parks 100” thing on the right. On the third link I can see the lined paper background, but nothing else. I initially thought these sites were incompatible with Safari, but I recently I saw one of the sites work on other computers so now I’m thinking it's just an adjustment to a Safari setting, but I have no idea which.
These sites work fine on Firefox and I have the latest version of Safari (5.0.4).
Any help would be appreciated.
http://www.nature.com/onc/archive/index.html
http://www.env.gov.bc.ca/bcparks/conservation.html
https://springerlink3.metapress.com/content/a00850425n777274/resource-secured/?t arget=fulltext.pdf&sid=14bmzx553r1f5g3uggopia3r&sh=www.springerlink.de

Hi Carolyn, sorry it took me so long, but I created a new account and had the same problem with these sites, so I verified my disk using disk utility and it said that "the disk appears to be OK". I also trashed the Safari contents folder and the Safari icon thinking I could download the application again and that might solved it, but when I relaunched it all my bookmarks were still there, so I assume I didn't totally get rid of all safari folders (those sites still didn't work). Do you have any other ideas that I could try? Here's what I see when I go to the following site
http://www.nature.com/genetics/index.html
thanks for your help
Pascal

Problems loading certain websites

I am having a problem loading several websites that I know are hosted on the same server. Three of these sites I have created. I am not able to load them using my iMac, iPad, or iPhone. The browser I am using is Safari and Mobile Safari. This issue has started suddenly. If I turn wi-fi off on my iPhone, I am able to load the sites thru the cellular connection. This makes me think the culprit is either my cable modem or my AirPort Extreme. I have had friends visit the sites with no issues.
The sites I am having problems with are...
www.hbsouthprinting.com
www.kleinscuba.com
www.parkbaptistchurch.org
www.mgmoptics.net
Any suggestions is greatly appreciated.
Thanks,
Marlin

To Apple Discussions.
Repair permissions & restart.
Open up the QT MIME Settings & click on the Images arrow so that it points down.
Make sure there are check marks in everything under Images except for PDF Image.
Click the OK button.
Restart (optional)

Problem loading safari webpage after switch from EDGE to 3G and vice versa.

ok, very simple question
i'm on edge, i want to go on safari, so i enable 3G. after that i go on safari and try to open a webpage. even after the 3G icon displays on top, it still takes a very long time before the webpage starts to load. Sometimes i get a message saying Safari could not open the page because the server stopped responding. IS THIS NORMAL?
also if im on 3G and switch down to EDGE and then open a page in safari i get a message saying Could not activate cellular data network, even though the page loads anyway. IS THAT NORMAL?
Message was edited by: Stevendo

are you on 4.0.1?
if so then this of course is not normal but it is also happening to me
ill be at home and have 3G on 4 bars and i try to load a page on safari and nothing happens, then i switch it to edge and it connects, but like u when switching from 3G to edge i get those messages.. also i noticed that this only happended after i updated to 4.0.1 and i NEVER got these problems b4 on 4.0 and to make things worse.. in order for my 3G data to work i have to make a phone call, hang up, then ill get connectivity on 3G..
so the fix... i dont kno??
but im suffering like u...

Having a problem loading certain sites

Ok so I'm beating my head against a wall trying to figure this out. It's becoming more and more frequent that there are certain sites that I cannot access, in any browser, on my macbook pro running Snow Leopard. My router and everything is configured fine because I have no problems on any other computer in my home. For example there is a website I cannot access survivethenights.com which is a project I backed on kickstarter. I can access it from any computer but my macbook pro and no browser will load it. I tried pinging the address from the terminal and it pings just fine! I even tried loading the page straight from the ip address it returned in the ping and it's a no go. So I was thinking maybe a firewall, DNS, or proxy problem right? Disabled the firewall, flushed my DNS cache, tried using Google's public DNS 8.8.8.8, checked all the DNS and proxy settings, even went as far as going into the system library preferences and deleting the SystemConfiguration folder and restarting my computer and rebuilding it. Still a no. It's been happening for a while now and I have put up with it for long enough.
Anyone have any ideas?

Thanks for the help. I followed your advice but "Apple Software Update" wasn't listed anywhere under "All Programs". But, now knowing it was the Apple Installer, I went to the Control Panel/"Add or Remove Programs" and found "Apple Software Update" listed there. I clicked on "Change" and selected "Repair" after it completed repairing the software, I tried loading iTunes and was successful. Thanks again for your quick response.

Problem loading certain popular webistes like google, facebook, yahoo in Firefox 3.6.12

The following error message is displayed in firefox when I try to load popular websites:
The connection has timed out
The server at www.yahoo.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access...
I can access these sites from other browsers. I am using firefox 3.6.12 on Ubuntu 10.10. Please help.

I went into the extensions and disabled AVG Safe Search and I no longer have the problem.

Airport Problem: Problem Loading Certain Pages

Why do some pages just refuse to open in the MacBook but when I go to the Desktop XP they are not down? It just happened to me with GMail. It has happened with Google, Flickr, etc. It is not the browser, as I try on 3 different ones before going to the desktop computer. Has it happened to you? Do you know the reason? Any solutions?
The error is either "Server not found" or "No Internet Connection". I do have Internet connection as I'm on Adium and other pages do load. The server is no down, as I am able to open them in another computer, as I have said.
I'm on a wireless connection. My transfer rate is 54, but when experiencing problems, I see 32, 24, etc. I almost never, or never, gets to 0, as others have reported. I gets really annoying, really fast.
Please help. I have read threads and threads and not a single one has a solution.

Did you check the Windows Accessibility settings?
*http://windows.microsoft.com/en-US/windows-vista/Make-the-computer-easier-to-see-optimize-visual-display
If it happens in other browser as well then you need to look there.
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.image pref should be 1.
There are also extensions like Adblock Plus (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Firefox won't load certain webpages, they stay blank and say it's loading.

Certain websites don't load when I go to them. They just stay white and say that they're loading. They stay like that for hours, as I've left tabs open. This happens on Nexopia.com and Omegle.com. This doesn't happen on IE, but I prefer Firefox.
== URL of affected sites ==
http://omegle.com, http://nexopia.com

Video in Omegle suddenly stopped working.
Please fix it.

Problem loading certain pages with WRT54G2 router

I recently had to password protect my wireless network (I live in the middle of nowhere and we got new neighbors who decided to leech off my internet), and since then have had trouble loading a handful of websites that I had previously been able to access. The websites also do not load on my mother's computer (same network) or on my phone (unless I use my cellular network and not my home's wifi). I have updated my router's firmware and reset it, but this has not fixed the issue. Could anyone help me with this?

Make sure the internet thru the router is working. What you can do is hardwired the pc to the router and check if you can open a website then access the router's interface again and double check the wireless settings, personalize if possible the SSID and the wireless channel (3,6,9,11), also for the wireless security use wpa2 personal/ TKIP. If internet wired to the router is not working, connect the pc straight to the modem for isolation.

Firefox says that in order to load a webpage, I have to have javascript enabled. When I follow the instructions, it shows that java IS installed, but I still can't load the page. What can I do to fix this?

When I try to load certain webpages, a message says I have to have Javascript enabled with instructions on how to enable Javascript. Javascript IS enabled, but I still get the same message. What can I do to fix this?

To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java
http://kb.mozillazine.org/Java <br />
http://kb.mozillazine.org/JavaScript

How do you change the MTU size in a Cisco 871?

This 871 is at a remote site and is an ezvpn IPsec client (network extension mode) back to a 3030 headend.
We're having problems with a PC trying to connect through the IPsec tunnel and we think it may be an MTU size problem.
Int F4 is the outside interface.
We are using a virtual-template associated with the crypto ipsec client ezvpn statement.
When I go into any of the 871 interfaces and type 'mtu 1370' it errors out with 'The F4 (or whatever interface) does not allow manual MTU size configuration.
If I type 'ip mtu 1370' on F4 (or vlan1 or virtual-template 1) this is accepted, but when I do a 'show int f 4', it still shows MTU of 1514 - even after a reload.
What is the correct way to set the MTU size in the 871 router - and is it best set on the F4 interface, the vlan, or the virtual-template interface?

Hi
As per the supporting doc Cisco 871 has one want ethernet interface and 2 switch ports.
I feel you are trying to change the mtu under the switch port which may not be possible.
You can refer the below link for more info..
http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html
regds

MTU Size Problem Loading Certain Webpages

Similar Messages

Maybe you are looking for