Loading Data from an Infoset to an Infocube

I have been searching on this forum but still confuse because of the different answers I have found,
I want to know if it is posible to create a DTP and transformations from an Infoset to an Infocube, I know the Infoset itself does not
contain any data, it is just a join between differents infoproviders, but I just want to know if is posible.
Edited by: Wasipati on Jan 25, 2011 9:54 PM

Hi,
Yes, an Infoset can be a used as the source of a transformation.
Source can be :- Infoset, an InfoObject, a DataStore, an InfoCube, a DataSource and an Infosource.
Target can be :- an InfoObject, a DataStore, an InfoCube , an Open Hub and an infosource.
Since infoset does not store any data physically, it will fetch the data from the underlying info providers(like DSO) through Joins.
Hope it helps!!!
Regards
Lekshmi

Similar Messages

  • Problem loading data from the PSA to the InfoCube

    Hello experts.
    I'm having a problem loading data from the PSA to the InfoCube.
    I'm using a DTP for this process but is happening the following error:
    "Diagnosis
          An error occurred while executing the transformation rule:
          The exact error message is:
          Overflow converting from''
          The error was triggered at the point in the Following Program:
          GP4KMDU7EAUOSBIZVE233WNLPIG 718
      System Response
          Processing the record date has Been terminated.
    Procedure
          The Following is additional information included in the higher-level
         node of the monitor:
         Transformation ID
         Data record number of the source record
         Number and the name of the rule Which produced the error
    Procedure for System Administration
    Have already created new DTP's deactivate and reactivate the InfoCube, the transformation, but solves nothing.
    Does anyone have any idea what to do?
    Thank you.

    HI,
    Is it a flat file load or loading frm any data source?
    try to execute the program GP4KMDU7EAUOSBIZVE233WNLPIG 718 in Se38 and check if its active and no syntax errors are there.
    Check the mapping of the fileds in transformations weather
    some data fileds are mapped to decimal or char 32 filed is mapped to Raw 16
    or calweek, calmonth mapped to calday etc.
    Check in St22 if there any short dumps ..
    Regards
    KP

  • Loading data to Headcount and Personnel Actions infocube (0PA_C01) from r/3

    Hi Gurus,
    I'm loading data from R/3 into my infocube 0PA_C01. I'm loading the data from 2 infosources 0HR_PA_0 (DS is 0HR_PA_0) and 0HR_PA_1. The infosource 0HR_PA_1 has inturn 3 datssources 0EMPLOYEE_ATTR, 0PERSON_ATTR and 0HR_PA_1. So on the whole I have 4 data sources and so 4 infopackages.
    Now the problem is that if I load an employee from r/3, the data is getting loaded into the cube in 4 lines, one per each info package. But I want to see all the employee details in one line. Any ideas on how to load the data into one line ??
    Regards,
    Ramesh

    why are u loading master data in the cube.
    Load the master data seperately and what ever attributes of master data you want make that as master data attributes when you load the transaction data using 0HR_PA_0 and 0HR_PA_1.
    Also, there could be 4 records in the master data that the reson you are getting 4 records depeding about the time dependent infoobject.
    You can check that in 0Employee and 0Person what all attributes are time dependented according to that you are getting records.
    As becuase of Begda and Endda the records changes in R/3 so even you will have that set of record in BW when you fetch that data .
    Hope this help.

  • How to load data from one Infocube to another request by request using DTP

    Hi All,
    I have a scenario where we are maintaining backup Infocube B for Infocube A.  User loads data from a flat file many times a day in different requests.  We need to maintain backup of the Infocube A on weekly basis.  i.e data to be refreshed with delta update from cube A to cube B.  There are some situations where user deletes some of the requests in Infocube A randomly after use.  Will this change effect in back up cube B when performed data refresh from cube A to cube B.  i.e. this functionality is similar to reconstruct in BW 3.5.  Now we are running on BI 7.0 SP 9.
    Can anyone answer this ASAP.
    Many Thanks,
    Ravi

    You cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
    If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with   " Get Data By Request set.

  • Load data from an infocube into other infocube

    Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
    I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
    is there anything else to do?
    Regards

    The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it  in Infosources Tab and i can´t create a Infopackage....that´s my problem

  • Loading data from infoset to DSO

    Hi,
    Iam loading data from InfoSet  to DSO..the transformations were fine..no errors found.
    But could not activate the target DSO.
    Getting error.".Error while activating transformation"
    How to over come this??
    Thanks
    Ravi

    Hi Ravi Kanth,
    Please check the following links. Hope this helps.
    [/message/1410802#1410802 [original link is broken];
    [/message/2115621#2115621 [original link is broken];
    Thanks,
    Sruthi

  • Error while loading data from DataSource to InfoCube/DSO through DTP

    Hi Friends,
    I am trying to load data from DataSource to InfoCube/DSO through DTP and getting the following error:
    Exception in substep: Extraction completed
    Processing terminated
    Data package 1 / 30.04.2009 22:38:30 / Status 'Processed with Errors'
    When i see the detail message it says:
    Syntax error in routine "convert_to_applstru", line 25 of generated program"
    I checked all my transformation and looks ok. I was able to load data earlier and i getting this error all of sudden. Does some one know what is this routine "convert_to_applstru" ?
    Thanks,
    Amit

    Hi Arun,
    Where do i see this generated program in RSRV. I dont see this in RSRV. Please guide me.
    Thanks,
    Amit

  • Error While Loading data from ODS to Infocube

    I am trying to load data from ODS to Infocube  thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
    My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
    Please advise.
    Thanks,
    RR

    In Details tab of monitor, in extraction step,
    Extraction(messages): Errors occured
    Green Light for Data Request Received
    Green Light for Data Selection Scheduled
    Yellow for 25000 Records sent(0 records received)
    Yellow for 25000 Records sent(0 records received)
    Yellow for 15000 Records sent(0 records received)
    Green Light for Data Selection Ended
    Please let me know, If you need more information.
    Thanks,
    R R

  • Loading data from R/3 systems to BI infocubes

    Hi all BI gurus,
                Can anyone pls explain in simple steps how to load data from SAP R/3 systems into an infocube?
    Thanks in advance,
    karthik

    Hi,
    Which module u want?
    if its SD(for example)
    steps>>
    1>In AWB goto "business content"
    2> goto "Info provider"
    3>Under infoarea select SD cubes
    4> Drag related cubes and ODS to right panel
    5> Set the grouping option "In Data flow before&afterwards"
    6>Install the collected objects
    Go to R/3
    7> Use Tcode RSA5 Transfer all regarding SD module datasources
    Goto BW
    8> Right click on the source system "Replicate datasources"
    [DataSources|http://help.sap.com/saphelp_nw70/helpdata/en/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm]
    Edited by: Obily on Jul 10, 2008 8:36 AM

  • Quetsion about loading data from transactional infocube

    Hi,
    We have 4 transaction infocubes where the users data will be saved from their layouts and we have one more transaction infocube(A) where all these 4 transactionl data will saved to onecube say(A)
    We also load from A- to other basic cube(B).
    My questions are when
    1.I load from All these 4 trnsactional cube to A - Do I need to say transactional can be planned not loading allowed.
    2.When I load from A to b(basic cuvbe do I need to say - Planning cannot be allowed only laoding)
    Let me know
    Thanks

    If you want to load data from planning cubes to further data target using update rules or transformation, their requests need to be green (yellow request would not load further). In this case the target transactional cube should be in loading mode. If you do not want to do these things, you can look at using a copy planning function (but remember that planning function takes more time than BW loading - this difference would be really noticeable if the data volume is large).
    There are many threads on this topic - if you search, you can get more info.

  • Help in loading data from an infocube to another

    all,
    i have been trying to load data from a consolidation infocube of one BW system to a similar infocube in another BW system
    I managed to load data by identifying the fist system as the source system
    the challenge that i m facing is as follows
    the first infocube has approx 70000 records; while when i uploaded the data approx only 20000 records got updated
    would appreciate help on why this has happened
    thanks for your time

    Hi,
       Are you using Open hub interface?
       If yes, then the structure/datamodel of the two infocubes are same?
       If both the infocubes are having the same structure, then did you apply any transformation (custom)logic,selection field values in the infospoke definition ?
       If the all the above are true, then do check the the status overview of the executed infospokes grouping by logical target system, destination, infospoke and day.
       And also double click to access single request log and then drill down to record count and errors.
    regards,
    ravi

  • Loading data from infocube to datastore

    Hello,
    we migrate from 3.1 to 2004s and we are testing our old process chain.
    In one chain we load data to a datastore, from the datastore to an infocube and finally from the infocube to an other datastore. Data are loading fom datastore to infocube but the loading from infocube to final datastore don't work (it finish correctly, but there no data transfered).
    I know that with 2004s i need to use transformation and DTP to load data from an infoprovider to another one.
    But is it still possible to use the old method or do i need to change. For the moment we just want to change nothing if it's possible ?
    Thank's
    Thierry

    Hi,
    The "old" method can still be fully applied in BI 7.0
    As far as the data in the ODS, can you post the eeror you are getting, or the data simply doesn't activate? (In that case, include a process for ODS data Activation in your chain, and you will be fine).
    Hope it helps,
    Gili

  • Error while loading data from DSO to Infocube

    Hi all,
    I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
    The data loads to the DSO, i'm able to see the contents in the active data table.
    Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
    When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
    Process Request
    Data Package 1: Error during processing
    Extract from DSO  XXXXX
    Processing Terminated
    The long text of the error gives the msg:  Data package 1: Processed with errors    RSBK257
    Thanks

    Hi,
    You can check the below forums.
    DTP with error RSBK257
    - Jaimin

  • Loading data from flat file to infocube

    hi,can any one give me the steps invovled  in loading data from flatfile to info cube in an elegant way

    hi,
    data loading in BI 7.0 from fla file means
    fisrt create one Cube or DSO with the same structure which you have in flatfile..and activate it.. ->now comes to Datasource tab> create one Datasource here you need to select type of data for example..
    select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab -->
    and load preview data Activate it..
    now select your datasource and create info package and schedule it..
    now your data will loded in to PSA level...----> and now comes to info provider select your cube.. and right clcik it..
    and create transformations.,. and activate it..----> and create DTP -- Activate it.. and Execute it..
    1)Create datasource. Here u can set/check the Soucre System fields.
    2)Create Transformation for that datasource. (no more update rules/transfer rules)
    2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
    DataSource -> Transformation -> (DTP)-->Data TargetNow if you want to load data into data target from Source System Datasource:
    1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
    2)Now Create DTP (Data Transfer Process) for that data source.
    3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
    Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation.
    Here's how the DTP data load works:
    1) Load InfoPackage
    2) Data gets loaded into PSA (hence why PSA only is selected)
    3) DTP gets "executed"
    4) Data gets loaded from PSA into the data target once the DTP has executed
    if helpful provide points
    regards
    harikrishna N

  • Unable to consolidate data from two DSOs into an InfoCube for reporting.

    Hello Experts
    I am working on BW 7.0 to create BEx Report as below:
    This report will have data coming from two different sources, some data from COPA DSO [such as Customer Number, Product Hierarchy1, Product Hierarchy2, Product Hierarchy3, Product Hierarchy4. Product Hierarchy5, Product Hierarchy6 and a few other Key Figures] and the rest [such as Product Hierarchy, Reference Document, Condition Type (both Active & Inactive), Condition Value and a few other Key Figures] from another DSO (ZSD_DS18) which is a copy of the BCT DSO (0SD_O06). I've chosen this DSO because this is the BCT DSO which is used to store data from a Standard Extractor 2LIS_13_VDKON.
    Below are the screenshots of these 2 DSOs:
    I have successfully extracted the data from 2LIS_13_VDKON (includes PROD_HIER but not Customer Number) and loaded into a DSO (ZSD_D17).
    All the testing is done using only one Sales Document No (VBELN).
    First test that I tried is.. to create an Infocube and loaded data from ZCOPA_01 and ZSD_DS18 and when the LISTCUBE was run on this InfoCube, the data is coming up in two different lines which is not very meaningful. Screenshot below:
    Therefore, I have created another DSO (ZSD_DS17) to Consolidate the data from ZCOPA_01 & ZSD_DS18 establishing mappings between some of common Chars such as below:
    ZCOPA_01                    ZSD_DS18
    0REFER_DOC  <->        0BILL_NUM
    0REFER_ITM    <->        0BILL_ITEM
    0ME_ORDER    <->        0DOC_NUMBER
    0ME_ITEM        <->        0S_ORD_ITEM
    51 records are loaded from ZSD_DS18 into ZSD_DS17 and 4 records are loaded from ZCOPA_01 into ZSD_DS17 for a particular Sales Document Number.
    When I am using a Write-Optimized DSO, data is coming in just 1 line but it is showing only 4 lines which is aggregated which is as expected since W/O DSO aggregates the data. However, when I use Standard DSO, the data is again splitting up into many lines.
    Is there something that I am missing in here while designing the Data Model or does this call for some ABAP being done, if so, where or should I have to talk to the Functional Lead and then Enhance the Standard Extractor, and even if I do that, I would still have to bring in those Key Figures from ZCOPA_01 for my reporting?
    Thank you very much in advance and your help is appreciated.
    Thanks,
    Chandu

    in your (current) InfoCube setup, you could work with "constant selection" on the key figures
    for the COPA key figures, you'll need to add product hierarchy to the key figures with a selection of # and constant selection flagged
    for the SD key figures, you'll have to do the same for customer & the product hierarchy levels (instead of product hierarchy)

Maybe you are looking for