Loading Data from R/3 to 3.5 AND 7.0

Hi,
We have a BW 3.5 that has been extracting Sales data from R/3 for the past few years. We now need to load the same data into a new BI 7.0. I saw that we can load data from one R/3 system to multiple BW systems through note 775568. But the question is, how will we INIT for a new BI system when the data extraction has already been happening for a long time. The other option would be move historical data from 3.5 TO 7.0 But is there any way for loading data from R/3 into the new BI.?
Thanks in advance.
Cheers
AN

Hi,
It is possible to have multiple BW/BI systems for one R3/ECC systems. In order for you to load data into both 3.5 and 7.0 systems, you need to difine BI 7.0 logical system in R3/ECC just like your BW 3.5 logical system in R3/ECC. In R3/ECC, the outbound queue (SMQ1) differentiates the deltas based on the logical system name that you have defined (3.5 and 7.0) in R3/ECC system. So, in RSA7 you will see same delta queue name twice but differentiated by logical system name. So you will not have problems loading deltas. Hope this will shed some light.
Regards,
Rao.

Similar Messages

Options for loading data from legacy mainframe to SAP CRM and ECC

Hello All,
I am new to SAP.
As part of data conversion planning from legacy mainframe to SAP CRM and ECC systems, I need to know the different tools available for loading the data and comparative analysis of the tools by showing the features. Please also describe the process to evaluate the tools (prototyping, technical discussions etc) and make the recommendations.
I would also appreciate any information on testing tools like (eCATT) and any third party tools (like Informatica)
I know I am asking for lot of things here. But, I really appreciate any information reagrding this.
Thanks,
Balu

Hi
Data Migration(Conversions) mainly involves the following Major Steps
Discovery->Extract->Cleanse->Transform->Load
Discovery-> Involves identifying various source systems available where the actual data is residing.
Extract->Extract the data from the source systems(legacy systems)
Cleanse->Cleanse the data by enriching it,De-duplications etc
Transform->Transform the data into SAP Loadable format
Load->Upload the data into SAP Using the Load Programs(Eg,BDC,LSMW,Data Transfer Workbench,BAPIs etc)
Also i would request you to visit http://www.businessobjects.com/solutions/im/data_migration.asp
Cheers,
Hakim

Loading Data from PAS to E&A (Entry And Approval)

Dear Friends
We have imported BW data to PAS database and we need some changes to the same. Is it possible to send from PAS to E & A. Have any body
got this type of requirement if yes then what is the best solution for the same.
Here in some cases whatever BW data imported want to modify in E & A screen. (This is reqd. for certain period due to some internal req.)
Rgds
SriG

Hi,
Copy PAS data to E&A is not a nomal or common process... it is not impossible, but requires advanced knowledge.
Try to find an alterative solution!
For example:
-export PAS data to a excel file
-open the excel file and make the changes you need
-load the data from the excel file
Hope this helps,
Miguel

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

R12 Interface table for loading data from 3rd part payroll system

Hi All,
Can anyone help me to have a lists and detailed technical information of available interface table on Oracle R12 for importing/loading data from third party payroll system. And what should be the best way of importing the data? It should be load first to AP then to GL or load it directly to GL?
Any help much appreciated. Thanks.
Cyrus

Hi Cyrus,
Can you please let us know your business requirements of this integration, i.e what business want to acheive out of this integration.
It depends on what your business requirements are wether to send only accounting information from payroll system to your Oracle GL ( then you can integrate Payroll system to Oracle GL directly, by sending the accounting information from your payroll) or if your requirement is to create payroll related invoices in AP and then do payments in oracle AP and then pass accounting information to GL ( then integrate your payroll to AP)
Regards,
Madhav

SAP BPC 10 NW loading data from Infoprovider (data value issue in BPC)

Hi Experts,
We are on SAP BPC 10 - 801 NW - SP05
We are having an error when loading data from infoprovider, we tested in DEV and QA and have similar behaviour: data values which are stored in infoprovider are loaded into BPC model with no differences.
However after make a transport procedure into PROD environment and then loading data into BPC Model something happens: suppose that 100,00 is a data value stored in a BW infoprovider, after loading data into BPC from this infoprovider, different data value is loaded into BPC. E.G 100,0 is in BW , but 10000,0 is store in BPC
Is there any idea to fix it or check it?
Thanks for your answer

Hi Giovanni,
This case occurs with colombian currency and others.
Compare the table TCURX in DEV, QA and PRD.
There must be an entry for currency COP only in PRD.
Like
CURRKEY CURRDEC
COP 0
Note 1240163 explain this behavior.
If you need the value to be stored in 100,00 format in BPC, you can create a routine to convert this value.

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE

Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik Shah

Dear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain.

Unable to load data from DSO to Cube

Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!

Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.

DTP load data from DSO to CUBE can't debug

Hi,all expert.
I met a problem yestoday.
When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
inconsistent input parameter(parameter:<unknow>,value <unknown>)
message no: RS_EXCEPTION 101.
I don't know why,PLZ help me,thank you very much.

Hi,
An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
Thanks,
Arminder

Error when loading data from DSO to Cube

Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
Fredrik

Hej Martin,
Tack!
Problem solved
//Fredrik

Dump when loading Data from DSO to Cube

Hi,
i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
any idea`s?
thx!
Dominik

the Dump occurs in the last step of the last data pakage in the DTP Monitor.
I checked the OSS note, but i don´t know how to check the kernel version.
Now i used another DSO for testing and i got another Dump with a different name.
After that i logged in again and it works with my test DSO data...
But still not working with the original one...
@Kazmi: What detaisl u mean exactly?

How to load data from one Infocube to another request by request using DTP

Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
Ravi

You cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set.

Automatically trigger the event to load data from Planning cube to Standard Cube

Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen, clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube ( " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?

hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps.

Loading data from Cube to Planning area

Hi,
If I am loading data from a cube to a planning area using transaction TSCUBE,
does the system load data into planning area for the combinations that exist in the cube or does it load for all CVCs?
For example,
I have my CVC as Plant, Material, Customer
If there are 4 CVCs in the POS that were previously generated as
Plant--Material--Customer
01--M1--
C1
01--M2--
C3
01--M2--
C2
01--M4--
C5
If the cube has data like this:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
(doesnot have the last combination), then if I use TSCUBE transaction to load data to Planning area from this cube,
is the data loaded as
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
Only for the 3 combinations that exist in the cube and not load anything for the last one
OR
is the data loaded as
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M2C3--
20
01--M2C2--
5
01--M4C5--
0
Load all 4 combinations and send 0 as the cube doesnot have this combination?
Hope I am clear on this question.
Thanks.

Thanks a lot Vinod, Srinivas and Harish. The reason why I am asking you is that we have a scenario where we get this situation.
We initially get data from R/3 to BW to APO like the below:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
Later when the customer is changed or bought out by somebody C1 is changed to C2. Some times when the business doesnot know who the customer is initially they just put C1 as dummy and then after sometime replace it by C2. Then the new record coming in is as follows:
Plant--MaterialCustomer----Qty.
01--M1C2--
10
BW can identify changes in transaction data but not in Master data. What I mean by this is when Qty. 10 changes from 10 to 20, the system can identify it in deltas.
If the customer (master data) changes to C2 from C1, the system thinks it's a new record all together then if I use delta loads, it gets me the following:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
01--M1C2--
10
If I am looking at Plant and Material Level, my data is doubled.
So we are planning to do a full load that works like this:
1. Initial data like the below:
Plant--MaterialCustomer----Qty.
01--M1C1--
10
The CVC is created and the planning area has Qty.10
Then we delete the contents of cube and do a full load into the cube with changed customer
Plant--MaterialCustomer----Qty.
01--M1C2--
10
This time a new CVC is created. Then we have another 10 loaded into Planning area.
If the system loads all CVCs, then the it would send
Plant--MaterialCustomer----Qty.
01--M1C1--
0
01--M1C1--
10
If the system loads only combinations in cube,
then it loads
Plant--MaterialCustomer----Qty.
01--M1C2--
10
But the system already has another 10 for Customer C1 duplicating the values.
We are trouble in the second case.
We had to go fr this solution instead of realignment as our business has no way pf knowing that C1 was replaced by C2.
Hope I am clear.

Loading Data from R/3 to 3.5 AND 7.0

Similar Messages

Maybe you are looking for