Loading data of last three years via initial load

Hi All,
We are having one requirement. We have to load data of last three years from source to target via initial load.
most of the table(s) are not having timestamp column.
Please suggest some process to get this done.
Thanks
Kamlesh

This question doesn't seem to have anything to do with GoldenGate, does it? Assuming the source & target are both the same DB vendor (ie, both Oracle), then there is no reason to use GG for the initial load. (But trying to figure out how to get the last 3 years data without timestamps will be an interesting challenge, in any case. Not sure which forum is best to answer that question.)

Similar Messages

How to delete data older than three years from DSO

Hi all,
We needs to keep historical data in the DSO only for three years. One way of doing this is by selective deletion we can delete data older than three years but we want to make it authomated. Is it possible to add a process or ABAP program to delete data older than three years.
If it is p[ossible by ABAP code then can you please give me sample code.
Many Thanks in advance.
Harman

Some time for in case of huge volume of data selective deletion is not works, Try for "prunning" option.
It's work as follows
1)     Create DSO which is same replica of your Source DSO.
2)     Create two transformation
     a) from Source DSO to Copy DSO
     b) Another is from Copy DSO to Source DSO
3)     Transprort Last 3 years records to Copy of Source DSO using DTP Filter range for time.
4)     Once data loading from Source DSO to Copy DSO get completed delete all data from Source DSO.
5)     Now load data from Copy DSO to Source DSO.
6)     After complete loading delete entire data from Source DSO.
I use prunning process to one of my client and it's work perfectly.
Regards,
Sushant
+919820849482

Can i eligibal for Microsoft MVP ,contributing since last three year on various forums

Can i eligible for Microsoft MVP ,contributing since last three year on various forums,my questions are
what are the Dates when I apply for MVP ?
I am contributing since last three year on various forums.
I am actively contributing on
http://www.c-sharpcorner.com
I got two times MVP award from C# corner web site.
my contribution involves in giving webinar as wel writing blogs,article,forum post and so on.
Never written any paid article even people offer me because i just wanted help people through community.
Following are the webinar activities i have done and doing
My Upcoming Webinar
Date
Topic
URL
9-Nov-2014
Getting Started with WCF
Click here to attend
Following are Webinar’s which I had given in Past
Date
Topic Name
Registered attendees
Event Detail URL
24-08-2014
Introduction to Web Services
115
Click here
18-05-2014
Advance
Object Oriented Programming with C#
170
Click here
20-10-2013
Object Oriented Programming with C#
315
Click here
you can see my contribution of articles,blogs,forum post and other contribution by using below link
http://www.c-sharpcorner.com/Authors/0c1bb2/
I want help ,advice and suggestion regarding Microsoft MVP, I know their are great authors on MSDN also their are great MVP's ,can please review my profile and tell me that i am eligible to apply Microsoft MVP and Can I shall get it ?
Please give your valuable time to review my above profile for Microsoft MVP .
Thanks in advance

VW
To nominate yourself you can go here http://mvp.microsoft.com/en-us/nominate-an-mvp.aspx
Wanikiya and Dyami--Team Zigzag

I have produced (7) hard cover iPhoto books in the last three years and would like to create a using a custom photo arrangement if possible.

I have produced (7) hard cover iPhoto books in the last three years using several of the provided templates. I would like to create a photo book using a custom photo arrangement if possible. Is it possible to create a custom photo book?

No - you can create custom pages in other software and use them
Using iPhoto you are limited to the themes adn layouts offered
LN

I must find my find my iphone data for last 1 year please help me

i must find my find my iphone data for last 1 year please help me

I confirmed, I have turned on " find my iphone. Here is the error I encountered

Vendor list - not get transaction from last three years

Dear Sir,
Can we have a list of vendor which are not get transaction from last three years ?
Vijay Vadgaonkar
SAP MM

either you write a z-report
or you download all vendor numbers from LFA1 table
then run MC$4 transaction for analyzing period of last 3 year.
download the vendor numbers from this report as well.
Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
However, these are the inactive vendors from purchasing point of view only.
vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

Importing Data from an ABAP system - JOB Initial Load - IDM 8.0

Hello all,
I got the error during the execution initial load job:
Value not legal for this attribute:Attribute: MX_USERTYPE" when storing attribute 'MX_USERTYPE=A'
Value not legal for this attribute:Attribute: MX_DATEFORMAT" when storing attribute 'MX_DATEFORMAT=1'
I have executed the job read value help content before start initial load job.
Could anyone explain if this attribute should be created manually in mxi_AttrValueHelp table before run the initial job?
Thanks

Hello Rafael,
There is a possibility that you have encountered a problem that we had with the language translations for the attribute values.
I would like to ask you to check one file content: could you try to open the language translations file: this should be located under ICCORE -> Database Schema -> SQL-Server -> 9-language-data.sql
There is a chance that this file is "broken". If so - we have fixed this specific problem in the Designtime Component patch 2 (now 3 is also available) - so you would need to update to this one.
You could also take a look at the table for the attribute values help - via executing "select * from mxi_attrvaluehelp".
Kind Regards,
Rali
SAP Identity Management Development

Replicating data once again to CRM after initial load fails for few records

My question (to put it simply):
We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
Detailed information:
This is a follow up question to the one posted here.
Can we turn off email validation during BP replication ?
We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
Any ideas how to resolve this issue?
Thanks in advance.
Max

Subramaniyan/Frederic,
We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully. When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
Thanks,
Max

Iphoto doesn't recognize my Kodak Z730 any more after three years of up loading into it.

Iphoto doesn't recognize my Kodak Z730 Easyshare cameranow. Been using it for over three years and as of two months ago the Apple doesn't recognize the files. Camera works fine on my step mothers Apple just not on mine. Anyone been through this already? I tried printing to a disk and loading that way. No luck. I think getting one of the auto updates from Apple may have screwed it up. Only thing I can think of. Has to be a way to fix it. ( I hope ! )
Erich

Update: I've tried deleting my Iphoto plist but it still doesn't help - any other suggestions?

HT1491 Bought and downloanded an album, but the last three songs did not load correctly and when i play them on my ipod they turn off before the end of the song. Itunes says all songs downloaded. How can this be fixed?

Bought and downloaded an album from Itunes. Now when I play it on my Ipod the last three songs are cut short. Itunes says all songs are downloaded, no incomplete downloads. How can this be fixed?

Hi..
Try re downloading ...
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Loading data into essbase - can't stop the loading process

Hello Everyone
I have built an interface which loads data into essbase.
The interface was working great until last night, don't know why it got stuck in the stage of loading data into essbase
(This is my bonus question, why? does it have anything to do wit hte fact that I have refreshed the database via planning)
Any way, we have tried to kill the loading process by clicking stop on the interface execution in operator, and even after we killed the
session in essbase it was still there in essbase.
Does anyone know why?
Thanks

Hi,
I can't answer your questions but ...
I'm really familiar with the fact that trying to stop an execution fail.
The only solution I found is to pass by an agent for all my executions.
With an agent if I have a problem, as an emergency I can stop the agent it will stop the execution...
I'm sure that it is a bit dirty but it works...
And that is better than nothing...
The ugliest and only way I found without agent to stop an execution was to drop a table used by the job (like a I$ table) it forces the failed...
Sorry no more clue.
Regards,
Brice

How to load an Excel sheet into Oracle via SQL* Loader

Hallo!I am trying to load an Excel spreadsheet into an Oracle 10g database via SQL*Loader.
How do I achieve this via Oracle Enterprise Manager?
Please give a detailed explanation especially covering the locations of the control file,infile,bad file etc for Oracle 10g running in both Windows and Linux platforms.
Thanks.

This has nothing to do with Oracle Enterprise Manager
SQL Loader is command line and it needs to be installed with SQL PLUS (The wrong install type will not have it)
Consider reviewing this:
http://www.orafaq.com/wiki/SQL*Loader_FAQ

I've been using firefox for my macbook pro for the last three years but lately when it starts up, I hear a strange piano chord play. Have others experienced it?

Only recently has Firefox for my macbook pro been acting strange when starting up. I will hear a piano chord play only once when the tabs are loading. Over the past two-three weeks on daily usage, this has happened three times. I'm just concerned my macbook has a virus/bug or if this can be resolved with changing a preference/setting in Firefox. I don't believe this is a problem with my computer itself and I have checked the notification alert sounds and none are the piano chords I'm hearing. I am currently using two add-ons: Tabs-mix plus and FVD Speed Dial if that helps.

Does it happen when you start up in Safe Mode?
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Error while loading data from sales order header via LO-Cockpit extraction

Hi Guys
I activated sales order header d/source 2lis_11_vhdr using 3x funtionality ontop of BI 7.0 dataflow. While creating infocube I am getting an error saying that " Infoobject 0RATE_TYPE is onl allowed as an attribute (not in infoprovider)"
Also while creating the same cube I am not able to move UNIT objects to UNIT dimension (as it dont allow me to drag and drop)
Can anyone please advise me why I am not able to activate cube based on above mentioned error.
Thanks in advance.
regards

Hi,
To be able to load transaction data for 2010, you should have the master data for that in the time dimension. For this, you need to go to BPC admin and add the dimension members in the time dimension manually.
Alternatively, you can have a process to import master data from BI system also. You can do some more research on this. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/46/fcc2ef34ee439aaa56a4f6ba001e4d/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/e0/532af2d0804218a59157136bb63a98/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/73/0f917879fd416099d04fb4c49889e0/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/88/e16046853041b391314a91bfe3618b/content.htm
Hope this helps.

I have just bought the iPad Air but when I try accessing my fotos from my iCloud account, I only get this years fotos whereas in my old iPad I can access the last three years of fotos. I've tried syncing to the computer but it didn't help

I have just bought the iPad Air but cannot access the roots I have on my iCloud account. They do appear on my old ipad 2, any ideas how I can access them please

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Loading data of last three years via initial load

Similar Messages

Maybe you are looking for