Loading data to DSO in BI 7.0

Hi.,
How to load data to DSO in BI 7.0. Is Infosource mandatory if we want to load data to DSO. What about the 0RECORDMODE field for DSO. How to maintain the transformations. Please guide me in BI 7.0 process.

Hi Selva,
InfoSource is not mandatory in BI 7.0...
0RECORDMODE
The field 0RECORDMODE is used for delta update to pass indicators of the DataSource from OLTP to BI system.
Questions and answers on InfoObject 0RECORDMODE
SAP Note Number:[399739 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d333939373339%7d]
0RECORDMODE
Re: Using 0RECORDMODE
Transformation
The transformation process allows you to consolidate, cleanse, and integrate data. You can semantically synchronize data from heterogeneous sources.
When you load data from one BI object into a further BI object, the data is passed through a transformation. A transformation converts the fields of the source into the format of the target.
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/frameset.htm
Creating Transformations
http://help.sap.com/saphelp_nw04s/helpdata/en/d5/da13426e48db2ce10000000a1550b0/frameset.htm
DataStore Object
A DataStore object serves as a storage location for consolidated and cleansed transaction data or master data on a document (atomic) level.
Unlike multidimensional data storage using InfoCubes, the data in DataStore objects is stored in transparent, flat database tables. The system does not create fact tables or dimension tables.
http://help.sap.com/saphelp_nw04s/helpdata/en/f9/45503c242b4a67e10000000a114084/frameset.htm
Scenario for Using Standard DataStore Objects (check the figure to see how DSO is integrated in data flow...)
http://help.sap.com/saphelp_nw04s/helpdata/en/bd/c627c88f9e11d4b2c90050da4c74dc/frameset.htm
Regards
Andreas

Similar Messages

  • Job cancelled While loading data from DSO to CUBE using DTP

    Hi All,
      while i am loading data frm DSO to CUBE the job load is getting cancelled.
    in the job overview i got the following messages
        SYST: Date 00/01/0000 not expected.
       Job cancelled after system exception ERROR_MESSAGE
    wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

    hi,
    Are u loading the flat file to DSO?
    then check the data in the PSA in the date field and replace with the correct date.
    i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
    so clear the data in PSA and then load to DSO and then to CUBE.
    If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

  • Unable to load data from DSO to Cube

    Good morning all,
    I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
    Thank you so much!

    Hi BI User,
    For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
    So..first do the initialization and perform delta upload into the cube.
    Regards,
    Subhashini.

  • DTP load data from DSO to CUBE can't debug

    Hi,all expert.
    I met a problem yestoday.
    When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
    inconsistent input parameter(parameter:<unknow>,value <unknown>)
    message no: RS_EXCEPTION 101.
    I don't know why,PLZ help me,thank you very much.

    Hi,
    An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
    Thanks,
    Arminder

  • Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

    Hi All,
    We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
    first time i have loaded the data it is full update.
    Second time i init the data load. I pulled the delta  from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
    I tried compression but still it did not worked.
    Can some has face this kind
    Thanks

    Yaseen & Soujanya,
    It is very hard to guess the problem with the amount of information you have provided.
    - What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
    - How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
    - Is there data already in the InfoCube?
    - Is there change log data for DSO or did someone delete all the PSA data?
    Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
    Good luck.
    Sudhi Karkada
    <a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

  • Error when loading data from DSO to Cube

    Hi,
    After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
    Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
    Has anyone experienced a similar problem or have some guidelines on how to resolve it?
    Kind regards,
    Fredrik

    Hej Martin,
    Tack!
    Problem solved
    //Fredrik

  • Dump when loading Data from DSO to Cube

    Hi,
    i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
    any idea`s?
    thx!
    Dominik

    the Dump occurs in the last step of the last data pakage in the DTP Monitor.
    I checked the OSS note, but i don´t know how to check the kernel version.
    Now i used another DSO for testing and i got another Dump with a different name.
    After that i logged in again and it works with my test DSO data...
    But still not working with the original one...
    @Kazmi: What detaisl u mean exactly?

  • Issue while loading data from DSO to Cube

    Gurus,
    I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
    Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
    All the loads are managed through Process Chains.
    Would there be any reason in specific/particular for this type of problem?
    Any pointers would be of greatest help !
    Regards,
    Yaseen & Soujanya

    Yaseen & Soujanya,
    It is very hard to guess the problem with the amount of information you have provided.
    - What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
    - How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
    - Is there data already in the InfoCube?
    - Is there change log data for DSO or did someone delete all the PSA data?
    Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
    Good luck.
    Sudhi Karkada
    <a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

  • Error while loading data from DSO to Infocube

    Hi all,
    I'm loading data from flat file to the cube via a DSO. I get an error in the DTP.
    The data loads to the DSO, i'm able to see the contents in the active data table.
    Transformation from DSO to Cube is activated without any errors. Its a one to one mapping. No routines used.
    When i execute the DTP ( i use full load option as it is a one time load) i get the following error in DTP: All of which are Red.
    Process Request
    Data Package 1: Error during processing
    Extract from DSO  XXXXX
    Processing Terminated
    The long text of the error gives the msg:  Data package 1: Processed with errors    RSBK257
    Thanks

    Hi,
    You can check the below forums.
    DTP with error RSBK257
    - Jaimin

  • Problem in loading data to DSO

    Hi,
    I have a problem in loading the data to DSO through Info package. The delta request has been running for a long time, but no data has been loaded. The job details screen is showing as below.
    Previously there was no issues with this chain.
    Can some one guide me to solve this issue please.?
    Regards
    Ragu

    Hi Ragu,
    The same issue has been happened for me long time back. I have solved this issue by running the Repair Full request and then Init. delta without Data Transfer.
    May be this may also work for you.
    Steps:
    1.Delete the request by marking it as RED
    2.Run Info package Repair full Request.
    Once this is success,
    3.Change Info package and Run Init delta without data transfer
    4. If it pop ups Init Delta already exists,then delete the previous init from the source.
    after the init delta is ended fine, then change your Info package to Delta as it is before.
    Hope it helps.
    regards
    Deva

  • Prob in loading data into DSO

    Hi All,
        I am loading the transaction data into DSO and it is loaded successfully till New Data table.....but when activating that data the icon for request for reporting is shown but the request is showing red....When I click on QM status, it says the request is (partially) activated and no further QM action possible.....what could be the error?
    Thanks
    Dora.

    Hi,
    There are a couple of places where you can see the activation progress.
    1) To start with SM37 job log > (give BI_PROCESS_ODSACTIVAT or BI_ODSA*)
    and it should give you the details about the activation job. If its active make sure that the job log is getting updated at frequent intervals. If its completed check the log for ODS activation.
    2) For very huge number of records SM37 job log may not get update frequently. In that case you have a workaround.
    Go to contents > Active Data table > No. of entries > This will keep on increasing at frequent intervals.
    3) SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
    4) Go to Activate button in Target > Request tab. Inside you can see a job log button. It will also show some log regarding the last activation.
    5) If the Reporting icon has appeared near the request id in ODS. If it appears that may indicate that request is available for reporting
    6) Check the request status in these tables.
    Table RSICCONT table contains the requests that are actually loaded in a target.
    Table RSMONICDP contains the request id of the fact table.
    Table RSODSACTREQ contains information if an ODS is available for reporting/deleting inactive requests also possible.
    Table RSODSACTUPDTYPE.
    Thanks,
    JituK

  • ERROR :  "Exceptions in Substep: Rules" while loading data from DSO to CUBE

    Hi All,
    I have a scenario like this.
    I was loading data from ODS to cube daily. everything was working fine till 2  days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error  "Exceptions in Substep: Rules" after some package of data loaded successfully.
    I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again  "Exceptions in Substep: Rules".
    Can any one tell me how to come out from this situation ?
    Regards,
    Komik Shah

    Dear,
    Check some related SDN posts:
    zDSo Loading Problem
    Re: Regarding Data load in cube
    Re: Regarding Data load in cube
    Re: Error : Exceptions in Substep: Rules
    Regards,
    Syed Hussain.

  • Error while loading data from DSO to Cube

    Dear Experts,
    I have change update routines of the update rule for DSO & update rule between DSO & cube. when i uploading data in DSO , working fine. But when uploading from DSO to cube , it giving error.
    Error Message :
    DataSource 8ZDSO_ABB does not have the same status as the source system in the Business Information Warehouse.
    The time stamp in the source system is 30.09.2010 14:05:17.
    The time stamp in the BW system is 09.05.2008 16:41:10.
    I executed program RS_TRANSTRU_ACTIVATE_ALL , still giving same error.
    Regards,
    Anand Mehrotra.

    Dear Experts,
    Thanks for help.Problem solved.
    Regards,
    Anand Mehrotra.

  • Errror while loading data from dso to info cube....

    Hi All,
    When i am running dtp from dso to cube i get a error i.e :
    1.  Data package processing terminated
         Message no. RSBK229
    2.  'Processed with Errors'
         Message no. RSBK257
    3. Error while updating to target 0FIGL_C10 (type INFOCUBE)
        Message no. RSBK241.
         So these are the errors i am getting , i am new to BI so how could i solve this errors....
         All the transformation are active with no errors.
    Thanks in Advance
    Regards,
    Mrigesh.
    Edited by: montz2006 on Dec 7, 2009 8:45 AM

    Hi All,
    Now i deleted data from dso and data source and again run the dtp,
    this time i got data from data-source to dso but , when i am running dtp between dso and cube , i am not finding an error.
    Now when i go to cube and see the data the request has came but data has not transferred .....
    The Request Status is green in cube but data is not cuming....
    Regards,
    Mrigesh.

  • Error in loading data from DSO to Cube

    Hi
    Daily process chains are executed and the data is loaded from DSO to several cubes.
    On 7.11.2008, there was an error in one of the cube. When checked in the short dump, the following is the dump msg:
    DBIF_REPO_PART_NOT_FOUND. I looked into the note 854261 and had a chat with our basis guy, he said our kernal and patch levels are more then that mentioned in the note.
    Strange thing is, from 8.11.2008 to till date, the loads are running fine but the problem was only on that date.
    So now i have several request in the cube with loads of data but "WITHOUT" reporting. Because of error on 7.11.2008.
    Can anyone help in solving the issue. I want to re-execute the load again and see if the problem occurs again or not.
    Regards
    Annie

    Hi,
       Check the reconstruction tab. If the request is green, you could try deleteing and reconstructing the incorrect request.
    Regards.

Maybe you are looking for