Loading historical data from excel

Hi GURU..In the best practice i have read it's written that a sample excel file.csv exists. Where can i find it? i dont have a cd with the best practices but i've seen them in a file.doc..thx
Edited by: Andreolli2 on Mar 28, 2011 3:42 PM

Sorry im new..im talking about the demand planning best practices..when i try to start the job to load the data a read the message Error in conversion exit CONVERSION_EXIT_CUNIT_INPUT. If i go to the monitor the status i red and i read:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
An error occurred in Extractor .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.
In the details i read:
-error in data request
-error occurred in the data selection
-processing (data packet): No data

Similar Messages

How to Load the data from excel file(Extension is .CSV) into the temp.table

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Hello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
 v_full_filename varchar2(500);
 v_server_path varchar2(2000);
 v_separator VARCHAR2(1);
 v_filename VARCHAR2(400);
 filename VARCHAR2 (100);
 v_stop_load varchar2 (2000);
 v_rec_error_log varchar2(4000);
 v_error_log varchar2(4000);
 ctr NUMBER (12);
 cols NUMBER (2);
 btn number;
 RES BOOLEAN;
 application ole2.obj_type;
 workbooks ole2.obj_type;
 workbook ole2.obj_type;
 worksheets ole2.obj_type;
 worksheet ole2.obj_type;
 cell ole2.obj_type;
 cellType ole2.OBJ_TYPE;
 args ole2.obj_type;
 PROCEDURE olearg
 IS
 args ole2.obj_type;
 BEGIN
 args := ole2.create_arglist;
 ole2.add_arg (args, ctr);
 ole2.add_arg (args, cols);
 cell := ole2.get_obj_property (worksheet, 'Cells', args);
 ole2.destroy_arglist (args);
 END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
 ,file_name => null
 ,file_filter => 'Excel files (*.xls)|*.xls|'
 ||'Excel files (*.xlsx)|*.xlsx|'
 ,message => 'Choose Excel file'
 ,dialog_type => null
 ,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
 filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
 application := ole2.create_obj ('Excel.Application');
 ole2.set_property (application, 'Visible', 'false');
 workbooks := ole2.get_obj_property (application, 'Workbooks');
 args := ole2.create_arglist;
 ole2.add_arg (args, filename); -- file path and name
 workbook := ole2.get_obj_property(workbooks,'Open',args);
 ole2.destroy_arglist (args);
 args := ole2.create_arglist;
 ole2.add_arg (args, 'Sheet1');
 worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
 ole2.destroy_arglist (args);
 ctr := 2; --row number
 cols := 1; -- column number
 go_block('xxx');
 FIRST_RECORD;
 LOOP
 --Column 1 VALUE --------------------------------------------------------------------
 olearg;
 v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
 :item1 := v_stop_load;
 cols := cols + 1;
 --Column 2 VALUE --------------------------------------------------------------------
 olearg;
 :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
 cols := cols + 1;
 --<and so on>
 ole2.invoke (application, 'Quit');
 ole2.RELEASE_OBJ (cell);
 ole2.RELEASE_OBJ (worksheet);
 ole2.RELEASE_OBJ (worksheets);
 ole2.RELEASE_OBJ (workbook);
 ole2.RELEASE_OBJ (workbooks);
 ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

Error while loading the data from excel to database.

Hi,
I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
What exactly the error is when i click the filename to view the result preview it shows an error as:
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
Kindly help with solution.
Thanks/Regards
Sakthivarman J.

Hello;
That error message comes from Microsoft, so something in you Excel sheet is the cause.
Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
Or convert it to a CSV and create an external table.
Best Regards
mseberg
Might also throw an 3163 as an error where you cannot see it.
Edited by: mseberg on Sep 9, 2011 7:34 AM

Error while loading data from EXCEL to OWB

Hi Marcos,
Thank you. I got way.
I did in the following steps...
1. I created system dsn odbc_excel.
2. I created initSID.ora
3. I updated in the listener.ora.
4. I created a soure module in odbc in owb.
5. I created destination module in oracle where I want to load the data from excel.
6. I am able to get the metadata of excel.
7. I created a mapping.
8. Validation and Generation phases completed successfully.
9. At the time of deployment I got the following error.
ORA-06550: line 16, column 22:
PL/SQL: ORA-04052: error occurred when looking up remote object odbc_excel.EmployeeRange@EXCEL_SID.US.ORACLE.COM@CONNECTOR_EXCEL_OWB_SRC_DEST
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
here
--excel_sid is the service name given in listener.ora.
--connector_excel_owb_src_dest is the connector from soruce to destination.
--Employee range is sheet name of excel.
I am fighting with this problem from past few days...
Thanks and regards
Gowtham
Message was edited by:
Gowtham Sen

Maybe you can consider save excel as .csv files and then you can load them as flatfiles to external table in OWB.

[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
Mudassar

Thats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Upload data from excel to snp livecach

Dear All.
I need to up load data from excel to snp. is their any bapi or function module.

Hello,
If you are using SCM 5.0 or above version you can load the data from Excel to SNP in two steps.
1. Load the data from excel to infocube with normal process.
2. Load the data from infocube to SNP by transaction /SAPAPO/REL_TO_SNP
Hope this helps.
Regards,
Prafulla

Script to upload data from excel to table.

Hi,
Am having a different scenario.
I need to create a script to load the data from excel into oracle table.
For eg: When user1 has emp1.csv file then the datas should be loaded into emp table. at the same time user 2 has emp2.csv file then the datas should be inserted in the same emp table. Likewise my user's has different .csv files of having same template. I need to upload all those datas into the same table.
How can i achieve it
regards,
Prasad K T,
9840021070.

Hi Prasad,
You can use Sql loader tool (sqlldr) in APPEND mode to load the data from csv file to the target table. The APPEND would not delete the existing data from the table.
Your control file may look like this:
LOAD DATA
INFILE 'emp1.csv'
BADFILE 'bad_emp1.csv'
APPEND
INTO TABLE mailing_list
FIELDS TERMINATED BY ","
( field1,
field2,
Regards,
Sahir

Loading data from excel to BPS layout

Hi,
I have BPS layouts in place and also excel sheets which are exact replica of those layouts.
I know 2 options to load excel data into the BPS. These are:
1) Copy and paste the data from excel to BPS layout.
2) Create a flat file in line format from excel and then use method explained in document "How to Load a Flat File into BW-BPS Using SAPGUI.pdf".
Is there any other way I can upload the same?
Any help in this regard will be highly appreciated.
thanks in advance.
regards,
Pankaj

Thanks to Vlad, Laurent & Srini for prompt replies.
But here the user needs to load data directly to the transactional cube.
So it is a case of "instead of keying in values" on to the BPS planning layout, user wants to upload the data from excel into the BPS layout.
Planning is done on SAP GUI and not web browser.
I am able to do the same using the document "How to Load a Flat File into BW-BPS Using SAPGUI".
But in this case the data needs to be converted into a simple csv file in line item format before it can be uploaded.
Is there any way, where we can upload from excel file without having it to change to csv format as required in "How to Load a Flat File into BW-BPS Using SAPGUI"?
thanks in advance.
regards,
Pankaj

Exporting Historical Data from Lookout Version 3.8 to Excel

Can anyone please give step-by-step instructions on how to export historical data from Lookout Version 3.8 to an Excel Spreadsheet or CSV file?

Hi koehler, in the following link you can fiond a detailed step by step instructions
http://digital.ni.com/public.nsf/websearch/5915049F3BF93935862568C5005E9DF3?OpenDocument
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Historical data from ACE20 load balancer modules

Hello,
I am trying to get some historical data from our ACE20 load balancer modules which are housed in a 6504, but cannot seem to find where to get this information from. I would like to get information such as memory used, CPU active connections, throughput, http requests etc over the past month, is there any way that I can do this? I am using ANM 2.0
Thanks

Hello,
Below are teh steps to load from DB connect.
Just go to Rsa1->modeling->source system->double click on the source system. On right habd side side right click on the topmost node.now it will take u to a screen, there u can give the table name (if u know) or just execute. it will display all the tables u have in Oracle. there double click on th eselected table and select the fields requared and now generate data source. now come back to RSA1->source system-> replicate the data source. now assign infosouce as usual.And create infopackage and start the load.
And this doesn't support delta process.
This document could help:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Regards,
Dhanya

Upload data from Excel to BI

Hi 2 all,
Can anyone please send me the complete steps for uploading of data from excel to BI??
Also tell me that when we use DSO or when we use infocube? and if we design query in query designer then we use info cube fields or DSO fields??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
there is no separate Tcode for 3.5 environment... but in RSA1 itself they give 3.X functionality also.. So, if you want to follow the 3.5 procedure you can go thru that... in the Infosource tab--> select your info area -->and right clcik it.. ->in that create INFOSOURCE 3.X.. for that just right clcik ur CUBE or DSO and --> Additional functions --> Update Rules.. and like that you can follow the same procedure which you done in 3.5..
and for data loading in BI 7.0 from fla file means
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
1) Create a data source
RSA1->Source Systems->FILE(File)->PC_FILE(Filesourcesystem)->Create Application Component(optional)-Create Data source
2) Create the data provider
3) Create Transformation
Right click on the data provider, choose 'create transformation' and choose your data source (give relevant data source and its type)
Just connect the relavant fields between your data source and data provider.
4) Create DTP
Then Double click on the DTP node created under yous transformations. choose the extraction mode
5) Load the data: there are 2 ways:
you can run the infopackage and DTP separately or create a process chain consisting of these infopackage and DTP and run.
Also check /people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option for hex option
Thanks,
Sankar M

Upload data from excel to oracle table

Hi,
if i'm user and using an application and i want to upload data from excel to oracle table on button click . Is it possible by using sql loader.
If yes then please clarify it .
is it possible from client end.
thanks
kam

Yes it is possible using SQL*LDR, External tables and ORCL Export Utility. Though I didn't try Export Utility to load the external files.
SQLLdr sysntax:
Create a control file.
It looks like this
Load data
Infile 'source.dat'
Into Table tablename
Fields terminated by ',' optionally enclosed by '"'
{code}
then use sqlldr command from your OS.
{code}
sqlldr userid/password@sid control = filename.ctl, data = source.dat, log = logname.log, bad = badname.log, discard = discardname.discard
{code}

Upload data from excel into database through pl/sql

Hi All,
I have excel which contains data lets say employee details,
I have one upload button ,which is used to upload excel and then i want to map the cell of excel to the database column and through plsql code i want to upload the excel data into database.
In short ,i want to upload the data from excel into database using plsql code,
or suggest me any other way to do this.(except the data load method present in apex)
Thanks,
Jitendra

if you use APEX 4 you can define you own table
the code below is for APEX 3
PROCEDURE pro_carga_planilla_prosp( p_archivo VARCHAR2) IS
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW(10000);
v_char CHAR(1);
c_chunk_len number := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array wwv_flow_global.vc_arr2;
v_rows number;
v_sr_no number := 1;
v_ok boolean := true;
v_local_ok BOOLEAN := TRUE;
v_reg_ok NUMBER := 0;
v_reg_ko NUMBER := 0;
v_localidad_id NUMBER;
v_departamento_id NUMBER;
v_cargo_id NUMBER;
v_prospecto_id NUMBER;
v_asesor_id NUMBER;
V_REG prospectos%rowtype;
BEGIN
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files
where name= p_archivo;
v_blob_len := dbms_lob.getlength(v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE ( v_position <= v_blob_len ) LOOP
v_raw_chunk := dbms_lob.substr(v_blob_data,c_chunk_len,v_position);
v_char := chr(hex_to_decimal(rawtohex(v_raw_chunk)));
v_line := v_line || v_char;
-- pro_log('linea '||v_line);
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved 
IF v_char = CHR(10) THEN
-- Convert comma to : to use wwv_flow_utilities 
v_line := replace(REPLACE (v_line, ',', ':'), ';',':');
v_line := replace(replace(v_line, chr(10)),chr(13));
if substr(v_line,1,1)= ':' then
v_line := '0'||v_line;
end if;
if instr(v_line,':',1,21) = 0 then
if instr(v_line,':',1,20) = 0 then
v_line:=v_line||':';
end if;
v_line:=v_line||':';
end if;
-- pro_log(v_line);
-- Convert each column separated by : into array of data 
v_data_array := wwv_flow_utilities.string_to_table (v_line);
-- Insert data into target table 
IF v_data_array(1) IS NOT NULL AND
v_sr_no <> 1 THEN
V_REG.NOMBRE:=ltrim(rtrim(v_data_array(2)));
V_REG.RAZON_SOCIAL:=v_data_array(3);
V_REG.DIRECCION := v_data_array(4)||' '||v_data_array(5);
-- PRO_LOG('PROSP 1 ' ||v_sr_no);
v_localidad_id := pack_empresas.get_localidad(v_data_array(6));
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
V_REG.LOCALIDAD_ID:=v_localidad_id;
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
V_REG.CODIGO_POSTAL:=LTRIM(RTRIM(v_data_array(7)) );
-- PRO_LOG('PROSP 1.3 '||v_sr_no);
-- PRO_LOG('PROSP 1.1 '||v_sr_no);
v_departamento_id := pack_empresas.get_departamento(v_data_array(8));
-- PRO_LOG('PROSP 1.4 '||v_sr_no);
V_REG.DEPARTAMENTO_ID:=v_departamento_id;
-- PRO_LOG('PROSP 1.5 '||v_sr_no);
V_REG.TELEFONO:=v_data_array(9);
--PRO_LOG('PROSP 1.6 '||v_sr_no);
V_REG.TELEFONO2:=v_data_array(10);
-- PRO_LOG('PROSP 1.7 '||v_sr_no);
V_REG.RUBRO:=v_data_array(11);
-- PRO_LOG('PROSP 1.8 '||v_sr_no);
V_REG.RUC:=ltrim(rtrim(v_data_array(12)));
-- PRO_LOG('PROSP 1.9 '||v_sr_no);
-- pro_log(v_data_array(1));
-- pro_log(v_data_array(2));
V_REG.CANTIDAD_EMPLEADOS:=RTRIM(LTRIM(v_data_array(13)));
-- PRO_LOG('PROSP 1.10 '||v_sr_no);
-- pro_log(v_data_array(14));
V_REG.CANTIDAD_BENEFICIARIOS:=RTRIM(LTRIM(v_data_array(14)));
--PRO_LOG('PROSP 1.11 '||v_sr_no);
V_REG.MAIL:=v_data_array(19);
-- pro_log(V_REG.MAIL);
-- PRO_LOG('PROSP 1.12 '||v_sr_no);
-- v_data_array(20):= replace(replace(v_data_array(20),chr(10)),chr(13));
if not v_data_array.exists(20) then
-- pro_log('existe');
-- pro_log(ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13)))));
V_REG.Proveedor:= ltrim(rtrim(replace(replace(v_data_array(20),chr(10)),chr(13))));
else
v_data_array(20):=null;
end if;
-- V_REG.PROVEEDOR:=v_data_array(20);
-- PRO_LOG('PROSP 1.13 '||v_sr_no);
if not v_data_array.exists(21) then
V_REG.OBSERVACIONES:=v_data_array(21);
else
v_data_array(21):=null;
end if;
-- PRO_LOG('PROSP 1.14 '||v_sr_no);
-- PRO_LOG('PROSP 1.2 '||v_sr_no);
insert into prospectos (nombre,razon_social, direccion,localidad_id,codigo_postal,
departamento_id, telefono, telefono2, rubro,ruc,cantidad_empleados,
cantidad_beneficiarios,mail,proveedor,observaciones)
values (nvl(ltrim(rtrim(v_data_array(2))),v_data_array(3)), v_data_array(3),
v_data_array(4)||' '||v_data_array(5),
v_localidad_id, LTRIM(RTRIM(v_data_array(7))),v_departamento_id, v_data_array(9),
v_data_array(10),v_data_array(11), ltrim(rtrim(v_data_array(12))), RTRIM(LTRIM(v_data_array(13))),
RTRIM(LTRIM(v_data_array(14))),v_data_array(19),v_data_array(20), v_data_array(21))
returning prospecto_id INTO v_prospecto_id;
-- PRO_LOG('PROSP 2');
v_cargo_id := pack_empresas.get_cargo(v_data_array(17));
-- PRO_LOG('PROSP 3');
insert into prospecto_contactos (prospecto_id,nombre,apellido,cargo_id,
telefono,mail)
values (v_prospecto_id, nvl(v_data_array(15),'S/N'), nvl(v_data_array(16),'S/A'),
v_cargo_id, v_data_array(18), v_data_array(19));
-- PRO_LOG('PROSP 4');
v_asesor_id := pack_empresas.get_asesor(v_data_array(1));
-- PRO_LOG('PROSP 5');
insert into asignaciones (prospecto_id,asesor_id,fecha_asignacion)
values (v_prospecto_id, v_asesor_id, trunc(sysdate));
-- PRO_LOG('PROSP 6');
END IF;
-- Clear out
v_line := NULL;
v_sr_no := v_sr_no + 1;
END IF;
END LOOP;
delete wwv_flow_files
where name= p_archivo;
END pro_carga_planilla_prosp;
function hex_to_decimal
--this function is based on one by Connor McDonald
--http://www.jlcomp.demon.co.uk/faq/base_convert.html
( p_hex_str in varchar2 ) return number
is
v_dec number;
v_hex varchar2(16) := '0123456789ABCDEF';
begin
v_dec := 0;
for indx in 1 .. length(p_hex_str)
loop
v_dec := v_dec * 16 + instr(v_hex,upper(substr(p_hex_str,indx,1)))-1;
end loop;
return v_dec;
end hex_to_decimal;

Loading historical data from excel

Similar Messages

Maybe you are looking for