Loading SWF in Dreamweaver using DIV and Accordian

Hi
I am wanting to create a web page with a vertical navigation panel on the left of the page and because this will includes 'categories' and 'sub categories' (see below)
CATEGORY 1
sub category 1a
sub category 1b
sub category 1c
sub category 1d
sub category 1e
CATEGORY 2
sub category 2a
sub category 2b
sub category 2c
sub category 2e
Ideally I would want the Category tabs when clicked to reveal the sub categories (Accordian)
I have the Spry Accordian set in a Div at the moment in Dreamweaver and the sub categories
open up and function fine. What I would like to achieve is to make all those sub categories links, to insert a SWF in to the div that is located to the right of the vertical nav column. (see attachment simple diagram) So, say sub category 2a was clicked then in the 'SWF display area div', the SWF associated with that link would appear, the if 'sub category 2d' was clicked the same 'SWF area div' was populated with the SWF linked to 'sub category 2d', if 'sub category 2e' was clicked then the SWF associated with 'sub category 2e' would then load into the 'SWF area div'. The attached image may make things clearer.
Many thanks in advance for any assistance you can give me.

Hi
What you are talking about is an ajax enabled page, you can use html or xml using spry, (see - http://www.adobe.com/devnet/spry/)
Or any type of page php,asp, etc. using one of the javascript frameworks such as jQuery.
PZ

Similar Messages

Videos won't load on specific sites using Safari and FireFox. I've cleared the caches, reset Safari, removed and reinstalled Flash player, downloaded newest update.

Videos won't load on specific sites using Safari and FireFox. I've cleared the caches, reset Safari, removed and reinstalled Flash player, downloaded newest update.

Videos won't load on specific sites using Safari and FireFox. I've cleared the caches, reset Safari, removed and reinstalled Flash player, downloaded newest update.

Dreamweaver AP DIV and Rollover Actions

New to Dreamweaver. Enviornment Win XP using DW CS4. I have created tables using rollovers but discovered that AP DIVS and rollovers don't always work as expected. Here is the problem. I have a menu column that is about 3 inches tall. The top porton of the menu is a tab that says "About Us." The lower portion of the column lists the menu items. I have the about us tab set up as a rollover. When you mouse over the tab, it is suppose to change color and the tab is suppose to move down about 1/4". Then when you actually click on the tab, you are taken to another web page. When I created this in a table, it was easy. I had two images. One image was set at the size of the td and when rolled over, the second image appeared in the different color and moved slightly down so as to give the appearance that the tab had moved down. However with the ap div, I can get the image to change color, but the smaller size image (to give the appearance of moving down), is actually stretched by the ap div to fit the size of the ap div box. Not at all what I expected. So it appears that an ap div behavior is in order but I am not sure how to accomplish this. I did not find any behavior that would resize the ap div box and move it down to the appropriate position. If you mouse out, it should return to the proper position, original size and return to the original color. Any ideas? A quick response would be appreciated. Thanks!

RM818 wrote:
A quick response would be appreciated. Thanks!
In that case, please cooperate by uploading your test files and posting a link as requested

Loading Non-English Characters using VBA and BAPI

Hi Experts,
I am trying to load Non-English characters (Chinese, Korean, Japanese, etc.) into a SAP Table using BAPI and VBA. I have set the connection language and codepage values but when I run the tool, the non-English characters display as ????? or #####. Do you know how to fix this issue?
Thanks!

If your language is a unicode tehn you need to change the options like IN SAP you need to change it to unicode in the initial screen Customize local layout(ALT F12) options 118 --> Encoding ....

Load Balance Reverse Poxy using ACE and HTTP Header Sticky

Dear all,
I have a reverse proxy that makes HTTP and HTTPS requests to an ACE.
For implement persistence I want to configure HTTP HEADER Stickyness using the X-Forwarder-For information but I don't know:
How to implement it ( I'l apreciate a little example about it).
Which values I need for OFFSET and LENGHT fields.
Can you help me please?
Thanks a lot!!

Hi Cesar.
Thanks a lot for your answer but I think you misunderstand the question or I'm not explaninig very well
I don't need to insert anything.
The serverfarm X will be accesed by a reverse proxy. This reverse proxy already inserts the X-Forearder-From header, so the request from the reverse proxy comes with this header to the serverfarm X.
The problem is that now, the serverfarm X sticky the client based on source IP. This is a wrong behavior becasue all the request comes form the same source (Reverse proxy) and all the load forwards to the same real IP address.
This is because I want to change the sticky from source IP to HTTP header and looks for the X-Forwarder-For filed.
Hop it will clarify the question!

Loading customer master data using lsmw and bdc

Hi all..
Iam a beginner in sap world and my first project is to load the customer master data from mainframes into sap.
Can anyone guide me how to approach to this project and what are the best materials to go through. Also can any one send some sample programs related to these..
It would be a great help of you guys for a beginner like me..
Thanks,
mahi

Message type DEBMAS
Idoc type DEBMAS** where ** is highest number available in your system (check via WE30). e.g. DEBMAS06

Can load image from file using LabVIEW and display on IMAQ graph?

I dont have IMAQ Vision for LabVIEW on my computer. Is it possible to load image file and display on an IMAQ graph?
Thanks!

Hey werwr,
In response to: "I dont have IMAQ Vision for LabVIEW on my computer. Is it possible to load image file and display on an IMAQ graph?"
As of right now, in order to read an image from file, you actually do need the IMAQ Vision software. The IMAQ driver without the Vision VI's will allow you to collect images from a framegrabber, and it will allow you to save those images to file. But the function that allows you to read an image from file does require the Vision VI's. Once you have the VI to read images from a file, you will be able to display the image on an IMAQ "Graph" or otherwise known as an Image Display.
I hope this helps. Please let me know if you have any further questions.
Thanks,
DJ
Applications Engineer
National Instruments

Inserting Images into Dreamweaver through Div Tag

Hi im quite new to Dreamweaver and i've got CS3...I've just
designed and sliced up a website in Photoshop and have started to
compile it together in Dreamweaver using HTML and CSS. I've just
added a Div tag and added images into the page and i've got stuck,
i cant seem to put another image next to one iv already placed
their.
I need help on how to work with Div Tags and applying images
so that i can fix my website like a Jigsaw.
I have provided the code i hav in my HTML so far...

Maybe this will help you -
Taking a Fireworks comp to a CSS-based layout in Dreamweaver
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DThandi" <[email protected]> wrote in
message
news:gk8anj$4qc$[email protected]..
> Let me show you the before and after images of the site
im working on,
> then
> maybe what im trying to describe can become more
clearer...Your right that
> i do
> need some basic understanding, I actually used to know
the answer to my
> own
> question but since i havn't played around with
Dreamweaver for a while i
> seem
> to have forgotten.
>
> This was the image on Photshop:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/SAMPLE.jpg
>
> This is where I am stuck now:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/stuck.jpg
>
> These are all the small images i have sliced up from
Photshop:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/Untitled.jpg
>
> As you can see i have trouble coding in HTML. So far i
have been
> following a
> tutorial video showing me how to had images and align
them through Div
> Tag...But now i am trying to put images side by side in
the Navigation
> area and
> on top of and underneath each other. As you can see i
have Home.jpg and
> Home-Scrap.jpg. Home Scrap needs to go under Home and
both of them images
> need
> to go next to image Left-Short.jpg.
>
> Thank You
>

Loading SWF with audio playing in it...

I was loading a SWF file, and noticed that even if I didn't
add it to the display via addChild() that I can hear the audio
playing in it. Why is this? And likewise, when I do addChild(), and
see the SWF, then later use removeChild(), and no longer see it, I
can still hear it playing.
I can sort of understand that even though it's not displayed
until using addChild() that one would HEAR it, because it is loaded
- correct? But how would I actually get rid of/delete this when I
no longer want to see/hear it ?

Thanks to the both of you! I'd like to see the things you do
to "close up shop" on the loaded SWF.
I also found something about getting access to your loaded
SWF here:
TextAccessing
document class of an externally loaded swf with AS3
That blog describes adding a generic object in the complete
listener:
var loaderInfo:LoaderInfo = e.target as LoaderInfo;
var myLoadedSWF:Object = loaderInfo.content;
You can then target myLoadedSWF and access your SWF. Seems
pretty different than AS1 & 2, but I suppose that's how it is
(unless there are better ways).

Controling a loaded swf with another loaded swf

I have a blank stage with only AS that loads an swf
addChildAt(0) and a second one addChildAt(1). This works. When the
user interacts with (1) it calls another addChild (not indexed) and
possibly that one loads another, depending on the choices made by
the user. How can I get any of these to control that very first
child that was loaded at (0)? I have run out of ideas.
Some of the code:
(on the main swf, nothing on the stage, only code that loads
the next two)
addChildAt(pHolder, 0);
pLoader.load(pURLReq);
pLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,
pLoaded);
and for the second:
addChildAt(mHolder, 1);
mLoader.load(mURLReq);
mLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,
mLoaded);
On the child of childAt(1), I have:
function replaceSWF(e:MouseEvent):void
pLoader = new Loader();
pLoader.load(new URLRequest("p.swf"));
pLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,
placeNewClip);
function placeNewClip(e:Event):void
removeChildAt(0);
addChildAt(e.target.content, 0);
If I use this exact same code from that very first swf, the
one that loads the first two external swfs, it works, but once I
put it on one of hte other loadeds and sub loaded swfs, I can't get
it to work. In the current state (0) it just makes everything on
the stage disappear, so I figured then using the index of (1) would
do it, but that or any other number results in absoluly nothing.
Help! I am really out of ideas here.
(the stacking looks like this) ---
sub second loaded SWF <==== needs to tell first loaded SWF
to unload then load a new swf at same index
second loaded SWF <==== loads the next one above
first loaded SWF <=== needs to be removed and another swf
loaded at the same index
mainSWF (loads two others) <=== code placed here works for
first loaded SWF

Kglad,
I tried your code and ran into some problems with stopping
the mc's, as the embedded mc's within the loaded swf need to stop
as well. I found the attached code to stop the mc's, but now am
having trouble with the sound objects.
Here's the issue, I used this:
this.soundPosition = currentMovie.loop1.position/1000;
this.currentMovie.loop1.stop();
... for the sound object stop commands and listed a new one
for each loop I was using. On the play button I started them back
up again. This all works, but when I start them up again they all
play, not just the one that is currently paused. Do you mind giving
me some guidance with the for (obj in mc) loop? My loop experience
is nil. What I want to do is have the code cycle through all of the
loops to see which one is playing, then store that information in a
variable, then pause and play the variable. Does that sound right?
Thanks again for the help!
-Sandy

Management of memory space - using totalMemory() and maxMemory()

I'm writing an app and applet which if "users" select too many images to display would easily create an java.lang.OutOfMemoryError. When loading images, I can used totalMemory() and maxMemory() to see what's being used and available before and/or after loading an image.
Is there a desirable "headroom" between totalMemory() and maxMemory() for "normal" JVM operations? In the case of the applet, there should be few net new objects created once the applet starts besides the images cached based on their selections.
My thinking is to limit the total memory available for image caching based on the the difference maxMemory() - "headrooom" - "application base object totalMemory()"
TIA,
Roy

RoyEpperson wrote:
I understand profiling the application to see what demands it has. Assuming the app/applet logic is not creating and disposing new objects, how much space does the JVM need to do it's "housekeeping"? or is that already allocated on initial invocation of the application?It isn't as simple as that.
I have gotten the VM (1.5 I believe) to start with something like a 3meg (somewhere around there) max heap. Although interesting that isn't usable.
When the VM loads something, like the regex api it is hard to say what actually gets loaded when. And when you create instances it takes more space as well.
So if you just want to guess then I would start with 32meg.

Using TextSnapshot class on a loaded SWF on an iPad

Hello, I am creating an iPad app. I am loading SWF files using a Loader object, then placing them in a movieclip and setting a SWFLoaders source property to this clip. Before I add the clip to the SWFLoader control I am using the TextSnapshot class on it, to retrieve an array with the getTextRunInfo method.
All this works fine when I test it on my desktop machine. However, on the iPad it causes the app to crash when a control using this clip is added to the stage. Can you still use TextSnapshot with an iPad, is there a workaround for this? Thanks for your help.

We are a university. most of our books are SWF files. We have been using iPad/FlexBuilder 4.5 to successfully view the contents of these books.
All navigation (i.e gotoandstop(page), etc work fine. Gestures for pageforward/pageback, zoom, pan work fine also.
Not sure I understand your comment.
However, there IS a specific problem with text snapshot. Below is a short code piece used to highlight text on a page.
If you remove the failing line everything works fine.
If you "debug" the iPad device everything works fine when you execute the code on the iPad
if you create a release build, when the application starts and the "findtext" line is executed the "app" freezes. No error message. The try/catch does not seem to catch any error.
This is something we really need for our app. If this is a bug how should we report it.
Thanks for your help.
public function highlightText(txt:String):void {
   var start_pos:int = 0;
   try {
    if (txt == null || txt.length == 0) { return; }
    infoMessage("highlightText: " + txt);
    allText = _libMC.textSnapshot;
    allTexts.push(allText); // no reason for this but must do to make work
    start_pos = allText.findText(start_pos, txt, false);     <<<<<< Failing line ====================================
    infoMessage("start_pos: " + start_pos);
   catch (err:Error) {
    infoMessage("error: " + err.message);
   finally {
    infoMessage("finally");

Using CSS and Javascript to display a div with flash in it, mozilla reloads the flash file!

I am using CSS and Javascript to display a div with an
embedded flash object in it. Mozilla Firefox reloads the flash file
when the div is displayed! (I dont want this to happen, as it's
unexpected functionality, my expectation would be that the flash
file would not change it's state at all, and would remain in
whatever state it was left in.)
I was wondering if anyone has come across this issue and is
there something I can do to prevent this from occurring?
To be more specific, I have a single HTML page with 8 flash
files embedded in it (yeah I know, it's a bit much). I am then
using CSS and Javascript to display (via a numbered link (with an
id)) an equivalent numbered div tag containing the flash file.
Mozilla Firefox reloads the flash object that is in the div.
Internet Explorer will not do this and will instead, load the flash
object only upon initial view of the flash object. All subsequent
links (in IE) will NOT reload the flash object on the page. I'm
guessing this is some kind of difference in the flash player as an
Active X object and the plugin, or is it just IE being clever? Or
am I way off?
Anyway, here is the code...

I am using CSS and Javascript to display a div with an
embedded flash object in it. Mozilla Firefox reloads the flash file
when the div is displayed! (I dont want this to happen, as it's
unexpected functionality, my expectation would be that the flash
file would not change it's state at all, and would remain in
whatever state it was left in.)
I was wondering if anyone has come across this issue and is
there something I can do to prevent this from occurring?
To be more specific, I have a single HTML page with 8 flash
files embedded in it (yeah I know, it's a bit much). I am then
using CSS and Javascript to display (via a numbered link (with an
id)) an equivalent numbered div tag containing the flash file.
Mozilla Firefox reloads the flash object that is in the div.
Internet Explorer will not do this and will instead, load the flash
object only upon initial view of the flash object. All subsequent
links (in IE) will NOT reload the flash object on the page. I'm
guessing this is some kind of difference in the flash player as an
Active X object and the plugin, or is it just IE being clever? Or
am I way off?
Anyway, here is the code...

How to load ai file in flash CS4 using code(Like loading swf or images )

Hi,
I have to load AI file in flash CS4 and provide the interaction with user.
Can any body help?
Thanks

Hi.
No you cannot import Eps, wmf, emf, ai, cdr files in swf dynamically using Action Script 3.

Last and greatest: conditional statements for click referring to loaded swf

Hey forum,
I am so close to being done with this site update it is exciting! I will be sure to throw it up here for you to see, since without this forum I would have been hurting!
The last big hurdle I have, is the following, and I hope someone can just throw me a bit of guidance on this.
I am looking for a way to write a function, that on click of my "next" button in the main timeline, will refer to my loaded swf MovieClip(imageLoader.content) telling it to go to the next frame label, so really a compound if/then situation – just referring to the loaded file throws me.
So, my next button is "pNext," and what I am looking for is something along the lines of:
if (loaded movie) is on frames 12-144, then go here (on click),
if (loaded movie) is on frames 144-155, then go here (on click)
etc. and so forth.
Thanks so much! Below is my code that works on one next click, so you can see the instances etc.
b
pNext.addEventListener (MouseEvent.CLICK, nextClick);
function nextClick (e:MouseEvent):void{
    MovieClip(imageLoader.content).gotoAndPlay ("aboutS1");

If I'm reading your request right, what you can try is to create an array of the frame labels in the order they appear and use the currentLabel property to determine where you are and indicate where to go...
var labels:Array = new Array("one","two","three","four","five"...etc...);
pNext.addEventListener (MouseEvent.CLICK, nextClick);
function nextClick (e:MouseEvent):void{
    var mc:MovieClip = MovieClip(imageLoader.content);
    var nextLabel:String = labels[labels.indexOf(String(mc.currentLabel))+1];
    mc.gotoAndPlay (nextLabel);

Loading SWF in Dreamweaver using DIV and Accordian

Similar Messages

Maybe you are looking for