Loading too long, and finally: "Stop script"
Firefox loads extremely slowly. In certain cases finally shows the "Stop script / Continue script" dialog several times. After closing I get the "FF is running" and have to kill in task manager. I'm forced to use other browsers.
Before disabling Copernik ALWAYS had the "Stop script" dialog with a mention of Copernik site. After disabling problem persists with other sites, not mentioned in any of the add ons.
A possible solution seems to me would be to load FF without extensions. Is this possible in an easy way?
== This happened ==
Every time Firefox opened
== Always extremely slow. Stop script perhaps only with google docs. Never closes. Disabled Copernik didn't help
I had the same problem, if you have the AVG toolbar that'll be what's causeing the problem. You'll need to disable it to stop the message boxes.
Go into tools, click add-ons, click extentions on the left and then click the disable button for the AVG toolbar/search or any other AVG extentions
Similar Messages
-
browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.
it seems to work when you reset the port
try this only after you've made sure that any antiviral/firewall software isnt blocking iTunes and the internet connection settings are fine
1. go to windows, accessories and right click on command prompt and run as administrator
2. type in netsh winsock reset (i know sounds ridiculous but it works type WITH SPACES) and press enter
3. Message saying "winsock reset successful now reboot your computer"
4. restart your computer, and open iTunes..backup should run much smoother and faster
5.Click on iTunes store might be working now -
Help
When im logged in on my phone and try to purchase any app, it does the loading spinning circle and then stops. And i can't download anything. Why is this?Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, check restrictions. Settings > General > Restrictions -
i tried to erase all content and reset settings from the device option.it is taking too long and its been 15 hours but not yet done.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
nabidhadi wrote:
.its showing a skeleton sigh with buffering and sometimes flipping to apple sign.
You iPod has been jail broken. Unfortunately you are on your own here. I can offer that you need to find out which method and software was used to JB.
Good luck...you're gonna need it.... -
My iPod was updating to iOS 6 and i shut it off during the update because it was taking too long and now my screen in baby blue i've tried to drain the battery but when i plugged it in to charge the blue screen came back on.I dont know what to do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I recently updated to ios5.0.1 and was syncing my itouch.I noticed that it was taking too long and my itouch turned off. now, i can't turn it on.went online and tried everything from the troubleshooting assistant but nothing works. HELP PLEASE!
Have yu tried everthing here:
iOS: Not responding or does not turn on
Next see if placing the iPod in DFU mode will allow iTunes to see the iPod so you can restore the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, make an appointment a the Genius Bar of an Apple stroe. -
I would like to backup my itunes to my external hard drive
I did all the steps up to "organize Liberary" which at this point I checked the box and the clicked"ok"
it then said "copying files failed. The file name was invalid or too long" "OK"
It will not let me consolidate the files so I can transfer to my external hard drive
what am I doing wrong - any suggestions?
thanks,Are you using consolidate files to bring in stray files to your main iTunes Media folder before backing up, or to copy the media folder to the external drive as part of backing up? If it is the latter then you are taking the wrong approach. See this user tip.
Run my script Unconsolidated on the library. It will show you the remaining unconsolidated files which might give a clue as to which files iTunes is having a problem with. You can consolidate selected files in batches (select, right-click) as opposed to trying to do everything in one go. Alternatively you could try moving the remaining unconsolidated files with ConsolidateByMoving as long as this step is a precursor to a backup..
tt2 -
ive been trying to download for hours now and its taking too long, i have places to go but i dont want to leave the wifi area if it will harm my iphone and the ios7 software isn't finished downloading...
I think you can stop the download without any harm coming to your phone. But if it is actually installing and not just downloading, I would let it finish.
-
I made a 3-minute movie with my iphone 4S. When I attempt to share it via email or message I get a message that says it is too long, that I should try to make a clip. Of course I had rather send the whole thing. What are the possibilities? I think my music and likely my videos and pictures are in the cloud.
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
ORA-01704: string literal too long and PHP
Ok all of you Oracle experts out there, I've had one heck of a day wrestling with this oracle stuff.
I've had a couple of posts/threads today with great success and currently I face another problem.
I'm using PHP/PEAR to execute my queries on an oracle table. I'm trying to store very long (2-3 pages) texts. Currently I'm getting a string too long error.
I've googled to find that there are certain limits when inserting into a table. The CLOB datafield may hold 4 gigs of text, but you may only insert 4000 bytes at a time. Or at least that's how I understand it.
Anyone got a work around for this? I've tried:
OCIBindByName($sql,":fieldName",&$myVariable, -1);
But that gets me the error:
ocibindbyname(): supplied argument is not a valid OCI8-Statement resource
which is an actual PHP/PEAR error....I think...
Anyone out there have any work around suggestions? I really dont want to parse the insert statement into pieces each being less then 4000 bytes.
Thanks,
R<snip>
But that gets me the error:
ocibindbyname(): supplied argument is not a valid OCI8-Statement resource
</snip>
Try check the enviroment setup for oracle in your apachectl (off course if you are using apache web server).
Just enviroment configuration in /etc/profile or .profile is not enough. -
Flash website I created is loading too slow and don't know how to put in preloader.
I have 4 swf files. The index.html page is a flash swf that I renamed to index.html in order for it to the be first page to come out.
I have googled how to add a preloader but it's all too confusing, and I'm not sure if I should add it to the first swf that I renamed index.html.
The website that I created for the company is loading way too slow.
I've deleted unused files.
I've compressed the images the best way I could.
I cannot change the images, because it's the whole purpose of the design.
Any other options of loading this website any faster other than changing the design, and putting it into Dreamweaver?
And where do I add the preloader after I made it? The first fla file?
Thanks.If by "converted" you mean that you've converted the trailer to a normal project using the menu option File>Convert to Project, then YES it is still possible to edit the Credits Title.
In the converted project, double-click on the blue Title bar that sits above the background clip. In the Viewer, double-click on the text you wish to change (or highlight text by dragging over it). Now you can replace the highlighted text by typing in the new text. You can also change fonts and font colours.
It's always good practice to duplicate the Trailer before converting it. To do this, while in Project Library view, click on the Trailer name in the Library then select File>Duplicate Project. A copy will appear in the Library with the same name as the Trailer, but with the number 1 appended. You can rename this copy as desired. Now, convert the duplicate to a standard project and continue with your editing as required. You now have the original Trailer in template form (which can be further edited), and can duplicate it again if required.
John
EDIT: Regarding my first sentence - just noticed that you did mention "converting it to a project" in you topic header. Sorry!
Message was edited by: John Cogdell -
Get-CsUserPoolInfo task too long and results in no data
We have a Lync 2013 FrontEndServer topology with 3 FE and CU October 2013 installed.
Since a few days one of our FE Servers takes too long by running the Get-CsUserPoolInfo cmdlet and provides the following information:
Identity : <domain account>
PrimaryPoolFQDN : <lync frontendpool fqdn>
BackupPoolFQDN :
UserServicesPoolFQDN : <lync frontendpool fqdn>
PrimaryPoolMachinesInPreferredOrder : {}
BackupPoolMachinesInPreferredOrder : {}
PrimaryPoolPrimaryRegistrar :
PrimaryPoolBackupRegistrars : {}
PrimaryPoolPrimaryUserService :
PrimaryPoolBackupUserServices : {}
BackupPoolPrimaryRegistrar :
BackupPoolBackupRegistrars : {}
BackupPoolPrimaryUserService :
BackupPoolReplicaUserServices : {}
If we are running the same command on another FE server we get the following result:
Identity : <domain account>
PrimaryPoolFQDN : <lync frontendpool fqdn>
BackupPoolFQDN :
UserServicesPoolFQDN : <lync frontendpool fqdn>
PrimaryPoolMachinesInPreferredOrder : {<registrar 02 fqdn>,<registrar 01 fqdn>,<registrar 03 fqdn>}
BackupPoolMachinesInPreferredOrder : {}
PrimaryPoolPrimaryRegistrar : <registrar 02 fqdn>
PrimaryPoolBackupRegistrars : {<registrar 01 fqdn>,<registrar 03 fqdn>}
PrimaryPoolPrimaryUserService : <registrar 02 fqdn>
PrimaryPoolBackupUserServices : {<registrat 01 fqdn>,<registrar 03 fqdn>}
BackupPoolPrimaryRegistrar :
BackupPoolBackupRegistrars : {}
BackupPoolPrimaryUserService :
BackupPoolReplicaUserServices : {}
What is here the problem?
Regards,
MarkusHi,
The issue may happen for the synchronization of the database.
Please run the invoke-CsManagementStoreReplication then run Get-CsUserPoolInfo to check it.
If you have multiple DC servers, please replicate the AD site manually.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
My string URL is too long and my servlet don't work.
I need to call servlet from my web page but it does not work because My string URL is too long (appear message in my web "server not found"), exists a way to solve this?
It's good that you have a solution. But your solution suggests that your original problem was not that the URL was too long, since you are still using GET. Probably it was something else. But at least you have a solution.
-
Time Capsule Backup gets slower and finally stops!!! HELP!
Hi,
I am using since a view years an Airport Extreme (as base station, connected to the internet modem) and an Airport Express as network extension.
Because of backup requirements I bought some days ago a 1GB Timecapsule and setup the network "from the scratch". Now the Timecapsule is connected to the internet modem as primarily base station and the other two devises help to extend the network all over my house. This is working fine.
BUT: the backup with time machine does not work. I started with my MacBook with 57GB data to be backuped. The process started via air promising (quite fast), but slowed down later on. And finally, it breaks up, often even with restarting the whole laptop. I did not yet succeed in the initial backup of this MacBook!
Can anyone help me? Can I do something wrong with the standard adjustments on the network via the Airport Utility SW? Why is the data transfer slowing down?
Funny enough, I had a similar effect some months age when I tried to use an external HD connected to my MacMini. At that point in time I thought that the issue is because of using a separate MacMini or a separate, external HD. That was also the reason why I decided to buy the integrated system from Apple: Time Capsule.
Matthias
Message was edited by: Matthias KoehlerHi,
I am using since a view years an Airport Extreme (as base station, connected to the internet modem) and an Airport Express as network extension.
Because of backup requirements I bought some days ago a 1GB Timecapsule and setup the network "from the scratch". Now the Timecapsule is connected to the internet modem as primarily base station and the other two devises help to extend the network all over my house. This is working fine.
BUT: the backup with time machine does not work. I started with my MacBook with 57GB data to be backuped. The process started via air promising (quite fast), but slowed down later on. And finally, it breaks up, often even with restarting the whole laptop. I did not yet succeed in the initial backup of this MacBook!
Can anyone help me? Can I do something wrong with the standard adjustments on the network via the Airport Utility SW? Why is the data transfer slowing down?
Funny enough, I had a similar effect some months age when I tried to use an external HD connected to my MacMini. At that point in time I thought that the issue is because of using a separate MacMini or a separate, external HD. That was also the reason why I decided to buy the integrated system from Apple: Time Capsule.
Matthias
Message was edited by: Matthias Koehler -
New Socket takes too long / how to stop a Thread ?
Hello to everyone,
I have a problem that I have been hunting this ol' Sun website all day for a suitable answer, and have found people who have asked this same question and not gotten answers. Finally, with but a shred of hope left, I post...
My really short version:
A call to the Socket(InetAddress,int) constructor can take a very long time before it times out. How to limit the wait?
My really detailed version:
I have a GUI for which the user enters comm parameters, then the program does some I/O while the user waits (but there is a Cancel button for the Impatient), then the results are displayed. Here is quick pseudocode (which, by the way, worked great before there were Sockets in this program -- only serial ports):
Main (GUI) thread:
--> reset the stop request flag
--> calls workerThread.start(), then brings up a Cancel dialog with a Cancel button (thus going to sleep)
--> (awake by dialog closing -- dialog may have been closed by workerThread or by user)
--> set stop request flag that worker thread checks (in case he's still alive)
--> call workerThread.interrupt() (in case he's alive but asleep for some reason (???))
--> call workerThread.join() to wait for worker thread to be dead (nothing to wait for if he's dead already)
--> display worker thread's result data or "Cancelled..." information, whichever worker thread has set
Worker thread:
--> yield (to give main thread a chance to get the Cancel Dialog showing)
--> do job, checking (every few code lines) that stop request flag is not set
--> if stop request, stop and set cancelled flag for Main thread to handle
--> if finish with no stop request, set result data for Main thread to handle
--> take down Cancel Dialog (does nothing if not still up, takes down and wakes main thread if still up)
THE PROBLEM: Worker thread's job involves doing IO, and it may need to instantiate a new Socket. If it is attempting to instantiate Socket with bad arguments, it can get stuck... The port int is hardcoded by the program, but the IPAddress must be typed by user.
If the arguments to Socket(InetAddress, int) constructor contain a valid-but-not-in-use IP address, the worker thread will get stuck in the Socket constructor for a LONG time (I observed 1m:38s). There is nothing the Main thread can do to stop this wait?
EVEN WORSE: If the user clicks the Cancel Button during this time, the dialog goes away soon/immediately, but then the GUI appears to be hanging (single-threaded look) until the long wait is over (after which the "Cancelled..." info is displayed).
MY QUESTION: Is there nothing the Main thread can do to stop this wait?
Your answers will be sincerely appreciated. Despite my hopeless attitude (see above), the folks at this forum really have yet to let me down ...
/Melhttp://developer.java.sun.com/developer/technicalArticles/Networking/timeouts/
Maybe you are looking for
-
How to save a file in Java Format?
Hello All, I want to save the files I'm writing in my program in java format? (I want the result files to end with .java). Is there a specific way to do this? Thnx in advance :)
-
HT1766 Iphone 4s backup error to Itunes
Iphone 4s is connected but upon attempts to backup I get a not connected error? Any suggestions. both Iphone and Itunes are the latest version
-
Replacement check after processing escheatment
Hi- On my ISU project, we are using an outside tool to perform the escheatment process and steps on unclaimed customer credit refund checks. The checks have to be voided after 180 days then moved to a specified GL account. One way to achieve the recl
-
Why does my Adobe Reader (10.1.3) freeze-up when I down load statements from some websites?
Why does my Adobe Reader (10.1.3) freeze-up when I down load statements from some websites? When I down load statements from some websites, the pdf freezes and I get a message that the website is not responding and that windows is checking for a solu
-
BO4 - Moving from 2 node cluster to 1 node
Hi, At moment we have a 2 node cluster in a virtual environment (2 virtual hosts but actually 1 physical host) so no added resilience. We have been asked by the hardware team to look at consolidating all the bo4 services onto 1 node. Plan would be 1)