Loading variations between T1 and DSL

When I test my website using the simulate download I get
different results for T1 and DSL. T1 loads the site perfectly,
however DSL skips certain components.
This is the site in question: www.meyerhoffer.com
My client says that they experience this error after clearing
their cache when using Safari, however upon refreshing the page the
site works fine.
My layers are structured with functions and actions on top.
The movie is set to load bottom up. I've tried numerous adjustments
to the layers as well as the code, however I have had no luck
whatsoever. If anyone cares to take a moment to look at the flash
source I will gladly provide it. Thank you.

Thanks Grant.
I read the article and it was of some help. Reference TCP/IP control panel settings. I called Commspeed support and they gave me their three current DNS numbers. I typed them per article and nothing - dead. Called them back and they gave me the typical winbox answers "No hable apple" so left to my own devices and considering the stratigies suggested in the article I did two things.
I opened the TCP/IP control panel and deleted the Name Server Address - As they are supposed to be assigned by the server. There was also a check box that said use 802.3 which was checked. I unchecked it and tried the internet. Blam it was right there. I don't know which stratigy worked as I did them simultaneously.
Still don't know about upgrading to 9.2.
Thanks again,
Bill
Beige g3 - 300mghz 160 meg memory Mac OS 9.1.x

Similar Messages

Question about load balancing between Portal and ABAP

Hi,
I have the problem whit load balancing between Portal and ECC (ERC) ABAP
Exist two system:
1) ECC (ERP) ABAP = Backend Module = HR
2) EP (JAVA) = Frontend
The users (9000 users) logon in the EP and run query (data personal) in the ECC. The problem to all user connect in Central Instance and not in the Dialog Instance.
How can balancing the conecction HTTP (EP) to ECC (ABAP)??
I need balancing in the ECC to Dialog Instance

Jco -> right. Another possibility is that you use iviews that point to the backend in this case you will need to use a load balanced entry for the backend system in the [system landscape|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/8c1e438d7017fce10000000a42189c/frameset.htm] -> SAP_R3_LoadBalancing
If you have ESS deployed on your portal, you will most probably need to do both.
Cheers Michael

Load-Balancing between Foreign and two Anchors

Hi, we have two foreign controllers (one active, one standby) and two anchor controllers. All APs are connected to the active foreign controller. The layer 3 networks for the wlan clients on both anchors are different for the same SSID. SSID: Internet, anchor 1: Subnet A, anchor 2: Subnet B. So when a client is getting anchored to Anchor 1, the clients will get an ip from subnet A and when the client is getting anchored to anchor 2, the client will get an ip from subnet B.
This is so far not a big problem because we only have a few accesspoints in some rooms. But what will happen, when we have a full covered wlan and the client roams from one AP to the other AP? Is there a possibility, that the client will anchored to a different anchor while roaming? I think this will result in a lack of connectivity because without a real disconnect the client will not ask for a new IP address.
Other question: Is it possible to disable this load-balancing between anchor controllers? Or can i make a client sticky to only one anchor as long as an access-session is established?
All controllers are 5760 with 3.3.3 software.

Hi acontes,
It's an interesting question.
In this case, if all AP's are on WLC-A and there is no possibility that an L3 inter-subnet roam will occur between WLC-A and WLC-B, I would just forward WLC-A to Anchor A and WLC-B (in the event of fail over) to Anchor B (if Anchors reside on different subnets). If you must specify Anchor A and Anchor B on each WLC for redundancy purposes, it's important to understand the guidelines and limitations with regard to Foreign / Anchor Design.
As Scott mentioned, the limitation with Anchoring design is that there is no primary / secondary configuration for an Anchor on the Foreign WLC.
If WLC-A has two entries (1) for Anchor-A and (2) for Anchor-B, the EoIP tunnels are establish and load-balancing occurs in a round robin fashion.
Keep in mind the following with regard to guest N+1 redundancy:
•A given foreign controller load balances wireless client connections across the list of anchor controllers configured for the guest WLAN. There is currently no method to designate one anchor as primary with one or more secondary anchors.
•Wireless clients that are associated with an anchor WLC that becomes unreachable are re-associated with another anchor defined for the WLAN. When this happens, assuming web authentication is being used, the client is redirected to the web portal authentication page and required to re-submit their credentials.
Since traffic is transported at Layer 2 via EoIP, the first point at which DHCP services can be implemented is either locally on the anchor controller or the controller can relay client DHCP requests to an external server. Since the IP address directly correlates to the DMZ subnet or the interface where the traffic egresses, it is possible for some clients to get IP's from both Subnet A or Subnet B in the event that WLC-A is building EoIP to both anchors.
1) What happens if my clients roam?
Nothing... since all AP's are on WLC-A, it's Intra-Controller Roaming
Each controller supports same-controller client roaming across access points managed by the same controller. This roaming is transparent to the client as the session is sustained, and the client continues using the same DHCP-assigned or client-assigned IP address. The controller provides DHCP functionality with a relay function. Same-controller roaming is supported in single-controller deployments and in multiple-controller deployments.
Would it be better to choose the same DHCP Pool on both anchors?
It's probably better to have redundant anchors on the same subnet, but it's not required.
3) How would you design this :-)
WLC-A <--EoIP--> Anchor A (DHCP Pool A)
WLC-A <--EoIP--> Anchor B (DHCP Pool A)
It's important to remeber what Scott mentioned about the lack of a primary / secondary relationship. If multiple controllers are added as mobility anchors for a particular WLAN on a foreign controller, the foreign controller internally sorts the controller by their IP address. The controller with the lowest IP address is the first anchor. For example, a typical ordered list would be 172.16.7.25, and 172.16.7.28. If the first client associates to the foreign controller's anchored WLAN, the client database entry is sent to the first anchor controller in the list, the second client is sent to the second controller in the list, and so on, until the end of the anchor list is reached. The process is repeated starting with the first anchor controller.
If any of the anchor controller is detected to be down, all the clients anchored to the controller are deauthenticated, and the clients then go through the authentication/anchoring process again in a round-robin manner with the remaining controller in the anchor list. This functionality is also extended to regular mobility clients through mobility failover. This feature enables mobility group members to detect failed members and reroute clients.

Load balance between DLSw and CIP routers

Take a look on this environment:
- 4 routers receiving all DLSw peers and circuits
- 4 routers with CIP boards connected to 2 mainframes
All CIP routers are configured with same MAC address. All routers (DLSw and CIP) are connected on a Ethernet LAN switching, so this traffic are pure LLC2.
How I can balance the traffic between DLSw and CIP routers ?
Thank's in advance.

I am not sure if I totally understand the topology. Let me rephrase it. Please correct me if I misunderstand the topology. In a data centre, there are 4 DLSw routers terminating DLSw peer connections from the remote sites. In the same data centre, there are 4 CIP routers which connects to 2 mainframes. CSNA is configured on all CIP router, which uses the same MAC. You configure transparent bridging on the DLSw routers, which connect to the same ethernet switches as the CIP routers. You configure SR/TLB on the CIP routers; so that all LLC2 circuits coming from the DLSw routers connect through the ethernet interfaces of the CIP routers.
Do you want the LLC2 circuits from a DLSw router load balance across 4 CIP routers? As duplicate MAC address is not allowed, there is no way to connect all 4 DLSw routers and CIP 4 routers on the same VLAN.
I can think of a couple of workarounds.
1. Enable SNASw on the 4 DLSw routers. Create a VDLC port on all 4 DLSw routers. The MAC address of the VDLC interface is the same. The VDLC MAC address is pointed by the remote SNA stations. Each DLSw router uses one of the CIP routers as DLUS.
2. If this is the case, create 4 VLANs on the ethernet switches. Connect a pair of DLSw router and CIP router to each VLAN.

Is there an ON LOAD difference between IE and Firefox?

I am experiencing a problem where a page does one thing in IE and something different in Firefox. Just wondering if anyone knows if this is normal behaviour or not.
I have an ApEx page which is building a dynamic AJAX hierarchy tree based on the example outlined in Carl Backstrom's MacDaddy Example apex.oracle.com site (http://htmldb.oracle.com/pls/otn/f?p=11933:49). As I click down the tree, each node is a hyperlink which takes me to a detail page about that node. I have an onload process on the Hierarchy Tree page which attempts to traverse down the tree to the node which I was "last at" when I was last on the page. This is so that when I am on the detail page of a node, I can click the "Back" button on the browser to navigate back to the Hierarchy Tree page and be presented with the "view" of the tree as when I left.
When I click the "Back" button to navigate back to the Hierarchy Tree page, the ONLOAD javascript code runs in IE, but not in Firefox. This has been verified by adding a simple "alert" function to the ONLOAD. The "alert" does not appear in Firefox when navigating back, but does in IE. By the way... when I initially navigate to the Hierarchy Tree page, the "alert" shows up in both IE and Firefox. It's the navigation BACK to the page where it doesn't show up in Firefox.
First of all, is this normal functionality? Meaning, when you use the Back button on the browser, is the ONLOAD code suppose to be run or does it only run when you navigate TO a page (not BACK TO a page)?
Secondly, is this normal functionality within ApEx? Is the ApEx environment doing anything in the background to screw up IE or Firefox from doing or not doing the ONLOAD code when navigating back to my Hierarchy Tree page?

Please stop posting with your off-topic link.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"seomax" <[email protected]> wrote in
message
news:g7es1a$hhi$[email protected]..
> wht is different between IE and firefox browser, and how
to implement css
> option(if related option exists) in firefox to see
appropriate
> output(which is
> not showing in firefox), wil not it mend ever? or is
there any solution
> for it?
> lots of people asked this question suggestion
appreciated.
>

Price VARIATION BETWEEN PR and PO price

Hi All ,
Working on Ecc6.0 there is a functionality to define tolerance between PO and PR prices under below path
go through-->SPRO-> MM-->Purchasing>PR>Tolerance Limits---->Define Tolerance keys and set tolerance limits for price variance.
In help of this node , it is written that we need to assign tolerance Key to PR doc type , WONDERING what the path for this assignment.
IN PR document type there is no field to attach tolerance key.
regards
Shrey

Hi
To use this you need to have installed public sector management in SAP. The you can see it in SPRO. in the below path
spro>public sector management>functions for US federal governement>integration>materials management.-->document to document tolerance.
It will work
Regards
Antony

Losing conection between wrt110 and DSL modem

I've had the wrt110 for about a week and everything has worked flawlessly, until now. I use the wrt110 to connect one laptop and one wii, wirelessly to the internet via a dsl modem. the problem I have is that every time I close the laptop, I lose my internet connection. I'm still connected to the wrt110, but cannot connect to the internet. also the internet light is still lit on the modem, so I assume that the modem is still recognizing an internet connection. the only way that I can get reconnected to the internet is to 1. disconnect the wrt110 from the modem 2. reset the modem 3. reset the wrt110 4. reconnect the wrt110 to the modem. then I can connect to the internet just fine until I close the laptop, then the problem starts over. please help

I think it might be the problem with the routers firmware, have you tried to upgrade the firmware of your router, If not then Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router, below are some wireless settings for your router and i think this might work perfectly fine.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Possible wifi conflict between airport and dsl modem wifi

I want add my TC to my wifi system. The existing wifi is based on a frontier modem connected to a DSL line. Will the existing wifi or the airport be the functioning wifi?

Either or both.. it is up to you.
Set one to channel 1 and set the other to channel 11. Then both can work happily together.. although I would space them a couple of meters.

Variation between IW29 and MCI7

Dear Experts,
We are comparing both reports with same inputs as follows:
Input for IW29:
Select outstanding, in process, completed
Notification type -Fun location - 1000-PROJ-ABC*
Malfunction start - 01.04.2009 to 30.04.2009
Malfunction end - 01.04.2009 to 30.04.2009
Input for MCI7:
Func location - 1000-PROJ-ABC*
Period to analyze -04.2009 to 04.2009
with the above inputs we are getting five notifications in report through IW29 where as in MCI7 only 3 incident we are getting.
All Completion date Malfuction start/End dates and times are entered correctly.
Please correct me where i am going wroung.
Thanks in advance.

Hi Don,
Please check for MCI7 Report it gives
Effective breakdowns
Mean Time between Repair
Mean Time to Repair
Time between Repair
Time to Repair
It means that there should be more number of notifiactions with Breakdown flag indicator on.
Where as this is not the requirement with IW29. So please check the report with Technical object start up date & few notifications with breakdown indicator on.
Thanks & Regards,
Ramesh

Load balance between MPLS and VPN

Dear All
There are two locations, site A and site B. I am confused with it. Any one can help to understand it? The site A and B are connected with two paths. One is MPLS and another is VPN over internet. we want MPLS as primary path and L2L VPN as backup. Only when primary path is down, VPN can be used. How can we configure it ? Can you give me suggestion ? or a link. Thank you.

Hello yangfrank,
You can set this with a floating static using tracking with ip sla.
Your primary route will be via MPLS
ip route 0.0.0.0 0.0.0.0 x.x.x.x track 1 (via MPLS)
ip route 0.0.0.0 0.0.0.0 y.y.y.y 10 (via VPN)
ip sla 1
icmp-echo z.z.z.z source interface gix/x (MPLS interface)
ip sla schedule 1 life forever start-time now
track 1 ip sla 1 reachability
here are examples:
http://networklessons.com/ip-routing/reliable-static-routing-with-ip-sla/
http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/813-cisco-router-ipsla-basic.html
hope this helps

Difference between Firefox and Safari when viewing iWeb created content.

Greeting Mac fans,
I've noticed that my iWeb pages load 2-3 times faster when viewed in Firefox than Safari. I find this a little suprising.
Also, my hit counter shows when the page is displayed in Firefox, but not in Safari.
Any ideas?
All content was created using iWeb and is hosted at my dotmac account. I have a domain name and I'm also using "masked URL fowarding"
Peace
super_tee
Emac 1.25ghz Mac OS X (10.4.8) Packed to the eyeballs with goodies....

There are two things that I think are at play
here...
First, the difference in loading times between
FireFox and Safari.... I haven't noticed that huge of
a difference myself, but what I have noticed is that
FireFox is much faster at pulling up cached
material....or maybe figuring out whether to pull
from cache vs. anew. I've noticed that FireFox also
hangs on to cached material more tenaciously than
Safari, meaning that sometimes I have to go in and
empty FireFox's cache in order to see something
update...I have to do this much more often in FireFox
than Safari.
Second, about your counters. If you turn your
masking off from your domain forwarding, you .Mac
counters will be visible to all. Using masking will
make them invisible to certain browsers under certain
conditions.
James, I guess I should download and use Firefox, but remember feeling burned the last time I did. I downloaded it, and soon after, things went awry with my computer. I am hoping that the were unrelated events, since Leo Laporte, the KFI techie guru, also recommends using Firefox for various reasons. He says that it is very safe because, basically, it is "dumb" (his words). But he meant that it's lack of bells and whistles made it go very fast, and made it avoid all the problems of Internet Explorer.
Lorna in Southern California

Initial load failing between identical tables. DEFGEN skewed and fixable?

Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.

Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.

I use BT Yahoo! but when I try and navigate to email from the home page it keeps jumping between 'connected and waiting for login' and never loads up.

My internet service provider is BT in the UK. The home page is www.btinternet.com. After I've logged on, the home page displays fine - I can see the summary of my emails in one of the windows on the home page. The problem comes when I click on the mail application. The page then tries to load the email application. However, it never actually loads, it keeps jumping between connected and waiting for login. It never achieves it so I just have to click the 'back' button to get to the home page. I use chrome and ie but neither has this problem.

I retraced my steps to how i got the Google app:
App Store icon on Home Screen > Search, at bottom > entered Google
The first Google App on the screen appears:
Google logo small g in blue square: Google Search; Open (because it is already installed). Below that is a picture of the iPod with the usual Google Search screen. I have never inserted a link into a discussion group so i hope you can open this.
http://https://itunes.apple.com/us/app/google-search/id284815942?mt=8
Does this bring us any closer?

Load balancing between application server and database

Hi,
is there any load balancing between the application server and the database? Consider we have a single instance of an application server that sends database queries from different clients to the database. Are the requests queued in some way at the application server, allowing to control the flow of the queries (e.g. queries from "more important" clients might be sent with a higher priority)?
Thanks for your help!

Hi Victor/Jim/Volker,
Thanks a lot for all the responses..
Just wanted to let you guys know that my installation finished successfully.
The thing which confused me was that my Qtime, Qdate and everything else was showing correct values..
Well, my problem I set the environmental variable PASE_TZ to the EST time zone on a SYS level using WRKENVVAR>F4>SYS and added the variable. I logged off and the sidofr logged off, but one user which should have logged off and didn't was the "SAPINST"(my installation user) which was logged in the subsystem TMKSVR00.
Even when I had closed the SAPINST installlation program, the user doesn't log off...it just sits there until and unless u shut him out of the system using the option 4 on wrkactjob for ending the JOB(SAPINST logged in the system below the TMKSVR00 subsystem)
So since the SAPISNT user never logged of, his environmental variables were not initilized properly, even after the changes...
This thought came to me almost after a 6 hours of wasting my time searching for notes here and there...
I think when u end/stop the install in SAPINST, the SAPINST user should log off the AS400 system, but I have noticed, it never does...although when u restart the installation, if u have noticed it shows you the log on for the SAPINST user in the TMKSVR screen...
Its kind of buggy, I would say...
I have noticed, that even when I log on to AS400 from home or from a remote PC using Emulator, it shows me logged in the subsystem and even after i have logged of, it still shows me there...
Anyway, thanks a lot guys...for all your responses..
Just wanted to let you know all.
Thanks
Abhi

Could any one tell me what is the difference between swfloader and module loader?

Hi All,
                      Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
                Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker

Loading variations between T1 and DSL

Similar Messages

Maybe you are looking for