LoadVars Woes

I have a problem with LoadVars when i execute the code from my server it works fine but when i upload it to the clients server then loadVars stops functioning.....here is my code. Anybody have any ideas why its not working?
application.allowDebug = true;
application.onAppStart = function()
application.onConnect = function(client) {
trace("fired");
trace("fired");
trace("fired");
this.acceptConnection(client);
sv0=new LoadVars();
sv0.filename ="test";
sv0.onLoad = function(){
trace(sv0.success);
sv0.sendAndLoad("http://privatechatnow.com/SampleASP/1e.aspx", sv0, "POST");

Http requests all default to port 80.
Now that I'm looking at your code again, I see that you have the loadvars instance loading into itself. I've never done it that way (not to say it's wrong... I've just never tried that). I typically create two loadvars instances, one as the sender, and one as the result target. Not sure if it makes a difference or not.

Similar Messages

Continual Mac woes (no question, just a rant)

It's Tuesday, and I am having terrible problems with my Mac. But then, why should Tuesday be different from any other day of the week.
Here is a typical day for me. The computer appears to be working OK. I need to watch a DVD for my work. I turn on DVD player, and put one in. The machine can't read the disc. It clicks and whirls, but the icon does not show up on the desktop. Meanwhile, so distressed is the machine that it freaks out. What was up until now was a fluidly operating machine suddenly reverts back to its old ways (i.e., its ways of two days ago). The hold ups and spinning pinwheels begin to eat of hours of my work day. (Remember the old days when computers made life easier?) The machine becomes sticky, gummy. Oh, I can move the curser and it seems to work for a second but then gets stuck in the dock, which explodes in icons and then freezes for five minutes. Yes. Five minutes.
Would love to use Force Quit, but the cursor is spinning, and nothing is responding. Funny about that old Mac. You can't force quit Force Quit. I guess I need to leave it open all the time.
Of course, FQ usually works on Safari. I have never just "quit" Safari. It always requires Force Quit, otherwise I can't turn off my computer. It stalls shut down.
Now I have a DVD trapped in there and can't get it out. [But I just got an answer from another posting.]
In the old macs, there used to be a pin hole you could stick a needle into ... can't find one on my flatpanel iMac.
I bought my Apple flat panel iMac in August of 2002. Yes, I know that that is a long time to have a computer, but I am not rich nor attached to a corporation that can splurge on computers. The first weekend I had the machine, I had three kernal panics.
Among the other problems I have documented are the following: the dock hiding itself unbidden and other features checking and unchecking themselves (Aug 2002); bus errors connected with OS 9 (Sept); some problems that inspired the tech person (Eric)) to talk me through deleting my user i.d., resulting in the loss of two months worth of e-mail (Thursday, 12 September); Preview problems (September); a bizarre box with an unmovable and undeletable red stop sign in it that no tech person or other Mac user I know had ever hear of (Monday 30 September); printing problems; computer won't shut down, numerous disconnection errors, which turned out to be caused by an OS X update (beginning December, 2002, or later); Kernel panics (Feb); computer won't shut down (March); Faxstexx problems, program won't allow me to set it up, finally just deleted the software (April); keys like "V" freeze and repeat endlessly (May 21); DVD Player freezes (May); Safari and Mail begin quitting unexpectedly (May); cursor begins to blink and fade out, plus odd sounds come out of the speakers, a constant error beeping (Sept 9); DVD Player problems (Oct 4).
I called AppleCare while I had it about once a week (the total between August 2002 and the time it ran out was about 155 calls). Naturally, some of these calls are motivated by user error. On the other hand, many of the issues I have called about were unprecedented as far as the Tech person was concerned, such as the blinking mouse, the red stop sign, and the DVD Player woes.
Things improved with Panther, but in Tiger many of the same old issues have returned.
I have been having so many problems with my Mac that I once wrote a letter to the company asking when do I qualify for a new replacement machine. I never received an answer, but I felt better for about a day. Then I turned on my Mac again.

The spinning ball of death as we used to call it is often caused by a lack of RAM, it is hard to be sure as I am not working on your machine, but sometimes things can be improved with additional RAM, it makes it seem like a whole new computer.
A lot of your problems sound like stuff that can be fixed easily enough, and although frustrating things happen here and there with updates. It sounds like you are in fairly good spirits with it all, I would suggest just researching a bit more into maintenance you can do to help maintain the computer and educate yourself a bit more (sounds like you already have learned quite a bit along the way) and you will find a lot of these issues take you a few seconds to rid yourself of. I would start by making sure you are repairing permissions regularly and running the most up to date software. If a lot of problems persist, try creating a second user that is a "test" user to see if the problem is replicated on that user (don't delete your other one, but if you do find the problem not on the other user, you might have a corrupt user, however you don't have to lose all your emails there are plenty of ways to back it up and import it in, or even just bring the entire Mail folder from your library over to the new user). Another thing you can do if you find a lot of system problems is archive and install the OS, it takes a bit of time, but doing it overnight shouldn't be an issue, and you won't lose any of your stuff.

LoadVars-using send to pass a variable from flash to php

For the life of me, I've tried everything:
I've researched LoadVars on Adobe forum, used David Powers'
books, googled 'flash to php', LoadVars, etc. and tried
sendAndLoad, send, and using $_POST, $_GET, $_REQUEST.
$HTTP_POSTVARS but I keep getting this same error. any advice
please?
I have a Unix server running Apache/PHP 4 - LoadVars worked
to load name-value pairs into an array -see thread)
My goal with this simple app is to prototype being able to
pass a variable from flash to a variable in php.
Parse error: syntax error, unexpected T_VARIABLE in
flash_to_SQL.php on line 5
Actionscript 2.0 code:
var c :LoadVars = new LoadVars();
c.testing = "123FOUR";
c.send ("
http://127.0.0.1/flash_to_SQL.php","_self","POST");
php code: (I also tried $_POST, $_GET, $_REQUEST.
$HTTP_POSTVARS)
<?php
//mysql 4.1.2, php 4 , NO mysqli
ecbo $_REQUEST ['testing'];
/?>

var formData:LoadVars = new LoadVars();
formData.fname = "Name";
formData.send("
http://www.website.com/flash_php.php",
formData, "POST");
<?php
$name = $_POST['fname'];
echo $name;
?>

ICal woes - any help please

Hi everyone, I am having some major iCal woes that I hope someone has the answer to.
Ok this is how I handle my workflow. I have numerous calendars such as "call", "viewing", "meeting", "work misc", "personal" etc. All colour coded and I use the month view as standard.
Under SL I would double click the day I add an event go through the boxes (name, location, time, etc) click save and job done.
Now under Lion when I double click a day I get an event box but only the header. So I have to type the header hit return then double click on the event again to get the box up so I can assign the event the right time and calendar to use. This is taking twice as long as it did before under SL and is a pain when you have a client on the phone. Am I missing something here? Why is it now so hard? - and I have tried that quick entry business but it doesn't work for me, I simply want the whole calendar entry box when I double click in month view.
Next problem is all new events go in as a all day event. Again another click I didn't need to do in SL. Then untick all day and enter a time LionCal doesn't set the end time 1 hour later anymore it sets it hours later for me, sometimes into the next day so I have to click into the date box and type the end date, again a massive slow down in my workflow.
Finally and most annoyingly in month view I cannot for the life of me get a 12 hour clock with AM/PM. I checked my international page in sys prefs and all is ok but LionCal is not playing ball.
Any help would be appreciated as I love iCal and run my life with it over MobileMe.

If you want to Commit changes at every record level in a Multi-Record Block, you may have to write the following triggers at the block level :-
1) Key-Down
2) Key-Up
3) You will also have to handle Mouse Events
i.e When-Mosue-Click etc
In each of these triggers, issue a commit statement :-
i.e.
Trigger Name :- KEY-DOWN [ Defined at Block Level ]
Trigger Code
Commit_Form;
Next_Record;
The Commit_Form statement will display a message for the user to COMMIT transaction to the DB.
Shailender

Airport express "G" - My woes and some thoughts. . .

I got the airport about this time last year. it worked great and i loved it. In December 2007 I moved to an apartment. I got the local cable co's internet, ran it to my ax and all was well. 6 weeks ago, due to our wonderful economy, i had the cable shut off as I talked to one of my neighbors who has wireless internet running unprotected (no password)..i asked him if i could leech for a bit till i got things sorted. he said cool and all was.....hmmm. SO in my airport menu i select his network and my internet works, sometimes drops then comes right back but no biggie. I reset my ax to just do airtunes and join his network, it restarted and voila, airtunes. problem is that in the last month i get a lot more drop outs and if i go more than 2 days with out streaming by ax disappears and i have to do a hard reset to get it to show up in the utility. The light is green but nothing...sometimes the amber light blinks and it never come on line at all....grrrrrr.
could all my newfound ax woes be due to the fact i am adding it to his network? i had no issues at all when i created my own one with my internet and airtunes.....
anyone?
EDIT: let me ask this then...when i am streaming music from my mbp to the ax, am i doint it dorectly or am i using his network? If I am sending music from my MBP to the ax via his network then that would basically answer all my questions, if the mbp goes direct then I have no clue....
edits as i am brainstorming

EDIT: let me ask this then...when i am streaming music from my mbp to the ax, am i doint it dorectly or am i using his network?
It goes from your MacBook Pro to his wireless base station... then from his base station to the AX. So it depends on the performance of his base station and network.

Hp Warranty Woes & Hard Drive Heartache

HP – Warranties Woes & Hard Drive Headaches.
Dear Internet Community (I.C)
I need your help.
I would like to know if I’m being unreasonable in my expectations or is Hewlett Packard (HP) not living up to its both moral & legal obligations as a good corporate citizen & what it alleges to be – a Customer Focused Global Computer Services company.
Apologies if this is a little long winded but in the interests of fairness I need to put as many HP comments in as possible – to give you a clear picture.
So bear with me, you will not be disappointed & there are a couple of questions you might like to answer & feedback to the appropriate parties.
Keep in mind at all times we are talking about approximately a $200 (NZD) fix – less than the lost profit on one lost sale for an HP PC ( you might think twice about HP products after reading this).
There are two parts to this problem :
Part 1 :
I purchased an HP Touch Smart a few years ago, I registered the product & warranty with them & over the years have received have received numerous emails stating “buy this, upgrade now”.
But I don’t recall ever receiving an “WARNING – Critical Failure Issue (CFI) apply attached patch immediately” email while under warranty. Why is this relevant?
Ø Seagate makes Hard Drives – in this case a Barracuda 7200.11
Ø HP buys said HD’s from Seagate
Ø Seagate finds a problem with firmware in HD’s & advises HP & supplies a fix
Ø HP knows which Customers have these HD’s, because you know what goes into your machines – right ? - see below
Ø HP FAILS to send email to Customers with the fix (a simple email with attachment would solve problem) or issue recall.
Ø HP even offers previously to fix problem FOC & puts fix on its Website - but only if the Customer knows somehow of the problem.
Ø Should the Customer intuitively& telepathically know of problems in HP Products in advance before it fails, because of course HP is not telling their Customers.
Problem or Outcome: My HD has bricked itself & will not operate as I never received notice of the firmware fix at any time either in or out of warranty.
Paul Boshoff - G M -Personal Systems Group- HP NZ (PB- GMPSG) says
“It would be very difficult, if not impossible, for any computer vendor to proactively notify it’s customers of component-level updates”
“Failures of the kind you’ve experienced are usually related to a specific batch of serial numbers and often those component serial numbers aren’t available when the user is registering that particular computer.”
Now let me know if you think I’m wrong, but it sounds like HP does not know what goes into its machines or at the very minimum does not keep track of this.
HP, a Global Computer Services company cannot possibly be expected to track what goes into its machines. HP apparently does not record or match the serial number of the HD with the machine it goes into.
If Ford & Toyota can track & record what tyres go on which make & model of their cars which are in the millions each year & can recall cars dating back 8-10 years just case of a manufacturers component malfunction why can’t HP link & record the HD details.
I can just hear it now “I’m sorry we don’t know which engine we put in your car”.
And let’s be real clear here – we are not talking about some small screw at the back of a PC – Along with the CPU & the RAM, the Hard Drive is pretty much up there in the top 3 of important components of any computer.
I.C – Do you feel
ü That fills you with confidence in HP products & services ?
ü Should HP be required to tell its customer of CFI’s with its products – particularly while under warranty?
ü Has HP tried to limit their liability & cost by directly NOT telling Customers of CFI’s while under warranty?
Part 2 :
When your HD bricks itself – apparently all is not lost – some very clever person has found a solution so you can get the HD going long enough to apply the firmware fix & then your HD is a good as new – Here is the link that spells it out with pics http://www.overclock.net/t/457286/seagate-bricked-firmware-drive-fix-with-pics)
You’ll see the relevance of this shortly.
After much messing about I received the following email from PB- GMPSG : “I have escalated your issue and have just received the go-ahead to repair your unit at our cost. We will be utilizing our own, authorized service provider to re-install the original hard-drive and to run the software fix on that unit.” (This guy most likely earns a six figure salary & isn’t able to sign off $200 fix).
NOTE : it does not limit or restrict what type of fixes will be used & also at this time HP was aware of both the Seagate fix & above fix.
I delivered the PC & bricked HD into the HP Authorised Repair Centre (ARC) as requested –their ticket instructions read “do firmware update…HP to incur costs. NO COST to customer”.
Obviously it’s not rocket science but you need the HD going before you can apply any firmware fix including this one – HP knew that to get the HD going they would need a special fix to enable them to apply the Seagate fix.
After all this is not an isolated case & I did point out to HP that they would need the fix I supplied (or something similar HP approved or designed if that made them more comfortable) prior to their offer of fixing the HD.
HP said their ARC’s had all the right software for fixing their machines. In addition I have been told on several occasions, the ARC’s are the bee’s knees, the cat pajamas, the whiz kids of the PC service world “The first port of call for the repair centre agent is to download all the latest service advisory notices and updates. This is a very fundamental part of the repair process and one that we spend a great deal of time emphasizing with our authorised repair centres” Keep this in mind.
A week later I received a call from Peter Gasporaratos, HP CS Melbourne (poor guy – caught in the middle) & stated “there is nothing else we can do for you”. When I asked if they had applied the fix he said “its not our responsibility.. its not part of our guidelines.. the ARC does not practice unauthorised methods..& this ARC will not go down this path”
Ironically the day before, Barry from the ARC said “we can attempt it, but we will charge you too”. So HP’s own ARC will do it, but there will be a cost – but hang on a minute, didn’t PB- GMPSG say “to repair your unit at our cost. We will be utilizing our own, authorized service provider to re-install the original hard-drive and to run the software fix on that unit” & HP CS put on the instructions “HP to incur costs. NO COST to customer”.
I.C – Do you feel
ü HP have said they will fix it at NO COST to me, regardless of what the fix entails ?
ü Should HP honour this commitment ?
ü Would you do business with a company that says one thing & does another & does not honour its commitment ?
ü That given the bricking fault did not need to happen if HP had been proactive in letting their customers know of the firmware issue & this is not an isolated case– shouldn’t they then be responsible in finding or developing a fix for getting the HD going long enough to apply the firmware fix if they are not going to use other recognised fixes.
Abstract
So that’s it – what do you think I.C. ?
Would you want HP computers & servers controlling the Traffic Lights, Air Traffic Control, Patient records & Medications at Hospitals knowing that HP will not tell these organisations that there is CFI with their products & they could suddenly lose everything. All dead while they try to find a back up computer with all the data – god forbid if President Obama’s “football” is powered by an HP – Nuclear War before we know it.
But seriously – I would love your feedback – Am I being unreasonable in asking them to honour their commitment for a $200 fix ?
And of course HP being a Customer Focused Global Computer Services company, would welcome your feedback.
Here are a couple of the players contact details who would love to hear from you :
ü Keith Watson – CEO –HP NZ -I initially contacted him & he thanked me for bringing it to his attention, then nothing.
Email : [email protected]
ü Paul Boshoff - G M -Personal Systems Group- HP NZ – well of course you now know who he is now – he would love feedback.
Email : [email protected]
ü Jessica Rangi – She’s the Spokes person/PR/Marketing for HP NZ & has just help launch HP new PC range in NZ – She would love your feedback as it might impact on her marketing & she is quoted as having helped out in warranty situations before & has worked at HP head office.
Email : [email protected]
ü Meg Whitman - President and Chief Executive Officer of HP Global
Email : [email protected]
They would all like to hear from you J
I.C
J Thanks for being patience & reading through to the end – now it’s up to you
L buy HP Products & Services or not.
L Do HP deserve your hard earned money if you now believe they aren’t going tell you about problems with their Product & Services.
Be kind to one another & take care.
Regards
Smithie
P.S - I sent this blog to HP for fact & quote checking prior to uploading (I gave them over a week to reply) – the silence was deafening from HP.

When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
I doubt the hard drive would be covered by buying an extended warranty after the fact. There is also no reason to buy a new hard drive from HP. Almost any 2.5" hard drive on the market will work in your computer. You will need your personal HP Recovery Disc set to return the computer to a factory like state. If you didn't create these discs, you will need to order a set.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Memory leak in LoadVars?

Hi,
In one of our apps, we've a need to continuously load new
data (using Loadvars) every x seconds from the server. However, I
seem to be having a memory leak issue when doing the same. Consider
the following skeletal code:
var myVars:LoadVars = new LoadVars();
myVars.onHTTPStatus = function(httpStatus) {
this.httpStatus = httpStatus;
myVars.onLoad = function(success:Boolean){
//trace("Data loaded: " + success);
var int:Number = setInterval(loadData,2000);
function loadData(){
myVars.load("
http://server/RealTime/ISv3.asp?UpperLimit=100&lowerLimit=0");
stop();
Here, I'm loading the data from an ASP page every 2 seconds
in the same LoadVars object. Now, when I run this movie continuosly
for a few hours, there's a huge increase in memory usage of this
movie. Using the profiler, I've made sure that the memory is
increasing for the Flash movie and not InetInfo or any other
process/thread.
Now, here we do not have anything else in the movie (no
visuals, no calculations etc.) and more over we're re-using the
same LoadVars object to reload data. Any pointers as to what we
could be doing wrong? Any help would be greatly appreciated.

You might try setting it up with two LoadVars and using
sendAndLoad. And
also you have no guarantee your call has finished before your
trying again.
You could use a simple boolean to only call the asp after the
prior call has
finished.
var mySender:LoadVars = new LoadVars();
var myReceiver:LoadVars = new LoadVars();
var doneLoading = true;
mySender.onHTTPStatus = function(httpStatus) {
this.httpStatus = httpStatus;
myReceiver.onLoad = function(success:Boolean){
doneLoading = true;
//trace("Data loaded: " + success);
function loadData(){
if(doneLoading){
doneLoading = false;
mySender.upperLimit = 100;
mySender.lowerLimit = 0;
mySender.sendAndLoad("
http://server/RealTime/ISv3.asp",
myReceiver);
var int:Number = setInterval(loadData, 2000);
stop();
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Question about the sendAndLoad of LoadVars

Hi all.
I have the following code:
function testSendLoadHttp()
loaderSendAndLoad.sendAndLoad("
http://localhost:9999/",
loaderSendAndLoad,"POST");
function loaderOnLoad(s)
if (s)
Result1.text = this.var2;
else
Result1.text = "Error";
stop ();
loaderSendAndLoad = new LoadVars();
loaderSendAndLoad.var1 = "FlashLite";
testSendLoadHttp();
loaderSendAndLoad.onLoad = loaderOnLoad;
sendLoadHttpsButton.onPress = function ()
testSendLoadHttp();
I'm receiving the var1 in my Symbian server, but i'm not
getting the var2 from the server. What can happen that can cause
the loaderOnLoad to go to the else clause? Because I know that the
server sends something, but it can be sending in the wrong time or
in the wrong way. In the server i'm sending like this:
iSendBuffer.Zero();
_LIT8(HEADER,"HTTP/1.1 200 OK\r\nContent-type:
application/x-www-form-urlencoded\r\nContent-length:
12var2=Symbian\r\n\r\n");
iSendBuffer.Format(HEADER);
iSocket.Write(iSendBuffer, iStatus);

Ok...Finally I solved my problem. Solutions:
1. Added Connection: close to the header, because the request
had it
2. I was sending through the wrong socket in the Symbian side
3. In my case it doesn't matter if the Content-type is
text/html or application/x-www-form-urlencoded...it worked with
both.
Thanks for your help.

How to define special character in html text file used in loadvars

Hi
I'm witing some maths software and need to use the division
sign in a text file which is loaded using LoadVars().
The variable loaded is then assigned to a text area. Here's
the variable example.
&hint1=<title><b>Challenge 1: Instant recall
of any table</b></title><p>Including table
divisions eg 56 ÷ 8= </p>
the division sign is missing or a just a box. I've already
tried most options: ÷ (which works in XML loaded to
flash), ÷ %F7
Can anyone help please?

Hi Michael. Thank you for your reply.
There is no declaration within sgm file itself - but while opening the file I use sgml application definition with the following settings:
Default API client: FmTranslator
SGML character encoding: ISO Latin1
XML character encoding: UTF-8
Namespace: Enable
CSS2 Preferences:
Generate CSS2: Disable
Add Fm CSS Attribute To XML: Disable
Retain Stylesheet Information: Disable
Entity locations
Entity search paths
C:\Program Files\Adobe\FrameMaker9\Structure\sgml\isoents
So as you can see, character encoding is set to ISO Latin1 (there is no way to use UTF-8 encoding in sgml files)
Typing ź or ć in sgm document and opening it with framemaker sgml application - I receive: ¿æ and message: "Non-SGML character found; should have been character reference"
Everything works fine when I type f.ex.: &x016B; and insert appropriate reference lines into isolat1.rw and isolat1.ent files
But what I would like to avoid is editing those isoent files each time new character is be needed.

Using LoadVars in SSAS to send data to a php file

I am using FMS 4.5 and have a simple application which I want to use to send two strings to a php file. But I get a compilation error whenever I try to assign any value to these objects:
Here is main.asc:
<code>
var variables = new LoadVars();
variables.username = "uname";
variables.send(http://url.abc.com/test.php,POST)
</code>
I can't compile with the second line. FMS just says: Sending error message: Compilation error
How do I send variables to a HTTP URL?

However that should be fine..
This is sample way to send data using LoadVars
var my_lv = new LoadVars();
my_lv.name= "myname";
my_lv.send("http://server/test.php", "_blank", "POST");
Try keeping url and and POST method within "quotes". Also, method [POST/GET] is third parameter, second is target where results must be loaded (if any)..

Making a call over HTTPS with LoadVars, XML.load(), and WebService - Yes or No?

Hello, do LoadVars, XML.load(), or WebService support HTTPS-based endpoints, Yes or No?
BACKGROUND
============
I've been trying to get a LoadVars to actually make a call to an HTTPS endpoint. There is nothing in the documentation that says it can't. I know that there's also XML.load() and WebService class, but from the looks of it they don't do HTTPS.
During my tests I have absolutely no issues with making calls to the same service over HTTP. When I change it to HTTPS I don't see HTTPStatus or even failures. Also, netstat on my server will show a connection being established with the endpoint when using HTTP but not when using HTTPS. I've also tried setting SSLVerifyCertificate to "false" in my Server.xml and after a restart of AMS it doesn't help, same symptom.
I've also googled and looked through all Adobe forum posts that I can find:
https://forums.adobe.com/message/4938426#4938426
https://forums.adobe.com/thread/1661461
https://forums.adobe.com/thread/782037
https://forums.adobe.com/message/74981
https://forums.adobe.com/message/5107735#5107735
https://forums.adobe.com/message/7815#7815
https://forums.adobe.com/message/53870#53870
https://forums.adobe.com/message/87797#87797
WebService Class - http://stackoverflow.com/questions/5619776/webservice-and-fms
The best I found from the posts above is a non-commital answer from adobe staff at https://forums.adobe.com/message/4938426#4938426 and a 3rd party person saying that Webservice doesn't work at http://stackoverflow.com/questions/5619776/webservice-and-fms.
All I need is an official supported/not-supported from the Adobe staff. Shouldn't be to hard after 5 years or so of ignoring the questions in the forum right?

Adobe, please provide some details to your current and possibly potential customers, in at least one of the many unanswered posts about making HTTPS requests from AMS.
P.S.
realeyes_jun,
RealEyes Media has been an inspiration to me for many years, and I would like to thank them for their efforts to better the media streaming community.
Also, would it be possible to please release the source to REDbug?

LoadVars Not Working in 9 but fine 8

I have a SWF that has a form and LoadVars.send() to send the
form info to the server. It works in 8 but does not work in 9.0r16.
The SWF is on the image server domain for several sites and
the SJP file that it sends to is on a different domain. I have a
crossdomain.xml in the file that the domain that recieves the forma
data.
Should the crossdomain.xml file be on the image server
instead?
If it is in the DOCROOT of that server do I still have t o
load it with System.security.loadPolicyFile?
Does that override what I put in
System.security.allowDomain("")?
Is my problem even cross domain related? since that should be
a problem in 8 as well and in 8 it works just fine.

First thing - all webpages should have a doctype. Yours doesn't. Add one that is consistent with the code you have already used on the page (looks like HTML 4.01 Transitional). This will prevent browsers from rendering the page in quirks mode (a bad thing).
Second - don't use commas or spaces in file/pathnames:
background-image: url(images/Touring%20Sport%20-%20Sports%20Tours,%20Schools%20Tours%20and%20Corporate%20To urs.jpg);
Third - when you specify a font, do it as a family, not a single font. In your case, a computer that doesn't have Helvetica will default to Times New Roman, which is probably not what you intended:
.Contact_Header {
font-family: Helvetica;
Fourth - justified text is not very satisfactory on the web, and is harder to read than non-justified text:
.Main_Text {
font-family: Helvetica;
color: #666;
text-align: justify;
Finally, in addition to these things, wonky code is the cause of your problems. Here is the validation report for this page - there are many things there that need to be fixed -
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.gecodesigns.com%2Ftest%2Ftouringsport%2 Ffootball-tours.html&charset=%28detect+automatically%29&doctype=Inline&group=0&user-agent= W3C_Validator%2F1.2
Also, read this about the impact of using col- and rowspans the way you have in your layout tables -
http://www.apptools.com/rants/spans.php

LoadVars doesn't work everytime

On both my offline pc in using "test" withing Flash 8 and AS
2.0, and on my unix webhosting server,
I wrote a php script that saves name-value pairs from mysql
(Yeah ! Finally - if you read my other posts here!)
&keyword10=keyword1&keyword11=organelle&keyword12=photosynthesis&keyword13=digestion&keywo rd14=&keyword15=&keyword16=
However, both in the flash enviroment using "test" and in
executing the swf after uploading to my server
http://www.4themax.com/education/regents_quest/quiz.swf
sometimes the LoadVars loads and decodes the name-value
pairs, and other times doesn't.
Any insight? I haven't uncovered anything in searching this
forum nor in googling.
The LoadVars AS 2.0 is (which is in the main timeline):
traces were inserted for debugging during the AS development
process.
//sqlcache
var my_lv:LoadVars = new LoadVars();
my_lv.onLoad = function (success:Boolean):Void {
if (success) {
//Convert the variable string to properties
my_lv.decode(my_lv.toString());
//trace(my_lv.toString());
// Iterate over properties in my_lv
i=0;
for (var prop in my_lv) {
//trace(prop+" -> "+my_lv[prop]);
//trace(i+" prop : "+prop);
//trace("my_lv: "+my_lv[prop]);
i++;
t = i-2; // used to find total array elements because the
decode process populates the elements in reverse order
//trace(t);
} else {
trace("Unable to load external file.");
my_lv.load("sqlcache.txt");
//sqlcache.txt
//sqlcache repeat
var my_lv2:LoadVars = new LoadVars();
my_lv2.onLoad = function (success:Boolean):Void {
if (success) {
//Convert the variable string to properties
my_lv2.decode(my_lv2.toString());
//trace(my_lv.toString());
// Iterate over properties in my_lv
i=0;
for (var prop in my_lv2) {
//trace(prop+" -> "+my_lv[prop]);
j=t-i;
_global.keywords[j] = my_lv2[prop];
//trace(j+" "+_global.keywords[j]);
//trace(j+"my_lv: "+my_lv2[prop]);
i++;
} else {
trace("Unable to load external file.");
my_lv2.load("sqlcache.txt");
//sqlcache.txt repeat

Again, you're welcome.
Using LoadVars is only one way to do this. And you should
urlencode your values in your serverside script before returning
them. That way you can pass "?" or "=" in the values if you need
to, they will just be encoded to allow that to work properly (this
is important because there will be other values like "%" that will
be affected as well I believe).
Other ways to do it include: flash remoting,which lets you
pass complex objects as well as returning complex objects, xml
which lets you represent complex objects (in whatever way you
choose) more easily, and even json -javascript object notation-
which can also represent complex objects and is fast to encode on
the server (e.g. with php 5) but is a little slower to transfer and
to decode on the flash side compared with remoting/amfphp for
example (see json.org for actionscript classes - I use this on my
own website for pseudo-ajax style dynamic content loading).

LoadVars problem with characters

hello everyone, i am a Actionscript novice and I have a small
problem.
i am using the LoadVars class and the toString method to
retrieve some result from the web. The result obtained is
represented by the following string (which is not the full string,
as it'll be much longer to write) :
sendRPCDone%28frameElement%2C%20%22chelsea%22%2C%20new%20Array%28%22chelsea%22%2C%20%22che lsea%20fc%22%2C%20%22
The problem is: how do I convert these characters in Unicode
mode, such as %28, into ' ( ' ? Is there any special function?
thanks
K

thanks blemmo

Foreign Characters in LoadVars

My application sends user text to a database server using the sendAndLoad. The only problem is that foreign characters are not being sent properly. Räul gets received as RÃ¤ul9. Is there something I have to do in order for the loadvars to not encode the text.
Heres my LoadVars code.
var ChatLog_lv = new LoadVars();
ChatLog_lv.LASCmd = "AI:4";
ChatLog_lv.ChatRoomKey = application.RoomKey;
ChatLog_lv.ChatRoomLog = cChatLog;
bSuccess = ChatLog_lv.sendAndLoad("http://"+application.Server,ChatLog_lv,"POST");
Thanks in advanced for anyone that can send some light into this issue.

I am also having the same issue since my updates, and i find that the extra characters change (without me doing anything) each time i connect my iphone to my computer (vista).
Also since the updates, i was getting the blue screen of death when connecting my iphone to my pc, but after re-downloading the software & re-installing, i have not had any issues in regards to my pc crashing.
Not sure if the two are related somehow or if something has become corrupt on my pc.
Is there any information on this one yet?
Cheers,
Shelle

LoadVars Woes

Similar Messages

Maybe you are looking for