Local Folio hyperlinks get published without updating article

When creating a local folio, I don't even have to update the article and the hyperlinks are published and functioning when using preview folio. How is this possible? I haven't tried this with a remote folio yet.

Hi Andrew,
can't help unfortunatly, but I get the same error when trying to download a retina display folio using a normal dps account. Download is "prepared" for about 5 minutes after which I get the error message:
An error has occurred while exporting the folio.
Failed to download the folio to your local disk.
[downloadIssueFailed]
However, normal resolution folios can be exported and exporting a retina folio from a professional DPS account works.
Best greetings,
Philip

Similar Messages

First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?

First question - I have Acrobat 9 on my desktop and the license seems to have been messed up. I tried to download and fis but I asked me for a disk. I don't have any idea where the "disk" is. Can I get the license update without that disk?
Second question - In anticipation of not being able to do that, I bought (at University bookstore) Acrobat XI Pro - do I need to uninstall the 9.0 Pro version before I try to install the XI version?

If you still have your serial number for Acrobat Pro there is a link to the installer here: Download Acrobat products | 9, 8

While trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

while trying to access my local network I get the message..."The page could not be opened because server cannot be found." This, after updating to Yosemite and paying (again) for the server app.

It's absolutley scandalous that a company with Apple's resources can let this happen. They should have staggered the release by region rather than opening the flood gates. The upgrade itself took me about 10 attempts to download it, and then I thought I was home free. That was until it rebooted and won't activate. It's over 2 hours now.
Scandalous!

Go RED again after PUBLISHED...getting WORSE after updated!!!

Hi,
Recently i've just updated the iWeb software, but getting worse while working on iWeb now. Sad and Too Bad to me...
Yesterday when i open my iWeb...every Pages from Blue turn to RED and after re-published..still RED.
Not only that problem, i thought some of my pages caused the problem..so i try to create a new SITE and drag all my pages into the New Site and try to Drag and Drop back the Pages 1 by 1 and updating/publishing to check the that where's the problem from...
But,
I can't even Drag my BLOG page now...however i delete the .plist from the preferences or from the ByHost...FAILED me again!!!!
I'm so disapointed to this so call "updated software" !!!!
What s'ld i do now? Help Help..need help!!!
I'm actually ready to publish my updated Website...
I feel sad that nowaday apple doesn't take care of customer and the Quality anymore..worse and worse from Hardware to software...Too Bad!!!!! sorry for my frustrated words...

Don't feel bad. I have weather widgets and countdown code imbedded in my site via text edit and idisk. So not only does it take forever to upload when I make a change but I have to go back into all the pages with the weather widgets and countdown clocks via text edit and add the code again. Iweb Version 1.1.2. Worked for years and then all of a sudden this. It's not a software problem, but a problem on Apples end communicating back to your computer that the pages have been successfully uploaded and should stay blue leaving only pages with changes to be uploaded next time unless you say different. It has been 6 weeks since Apple told me of this problem and still no solution. I can only wonder how much more trouble is coming when .mac is officially gone. I don't have publish to mobile me in my version 1.1.2 pull down menus, only publish to .mac. I hope a free software update will add these things to my version and take care of this, but I'm not holding my breath.Will they say I need to buy a new version of Iweb. It worked great till they screwed something up on their end. I don't want anythiing more than version 1.1.2 It worked great! It seems to have started when mobile me started running. The two systems maybe are conflicting with each other. Figure it out soon Apple or .mac/mobileme will be something to dump and move to something that works.

An error has occurred while updating article layouts. The InDesign file for the layout cannot be...

When trying to complete the tutorial for indesign I get the following error when trying to add an article to my folio:
"An error has occurred while updating article layouts. The InDesign file for the layout cannot be found."
I am able to create the folio then I click into articles. My document "WiFi_v.indd" is open when clicking add article, but I keep getting this error message.
I am using the following versions of the software (Should be the latest).
- Folio Builder (Downloaded version Version 1.1.8.0)
reported version:
11.4.3.20111129_m672305 7.5.5.17
Adobe In Design 7.5.2 CS 5.5
Also tried reinstalling the plugins (uninstall + install)

If you're on Mac OS with the OS in another language than english the "User" folder might contain a non english character and causing problems.
I e in Sweden the Mac OS user-folder is called "Användare". When attempting uploading articles from a file locaded anywere this "Användare" is in the file path the Folio producer says Error finding InDesign layout, due to -what i think is-the "ä" in Användare. If you still want to work local you can place the InDesign files directly into the Macintosh HD. In this case the User folder is not used.
BR
Henrik

Updated articles in Not schowing in viewer app

When I update an article of my folio in InDesign CS6 and update in the Folio Builder panel, and then hit update in the Folio Producer still the old article shows up in the downloaded issue.
When I check folio producer everything seems fine.
I do get the notification that an update is and that is downloaded fine.
How can i get the updated articles to show up properly in the published folio?
InDesign files were checken and are fine...

Recheck if:
1. It was published as Public and Free.
2. There is no duplicate product id.
If that does not resolved the issue, try unpublishing and republishing the folio.

Publish vs Update

Hi there,
One question is still confusing me after the iWeb v1.1 update: the issue of publishing vs updating.
It seems to me that the only way to get new content (i.e., a new photo page) onto my iWeb (published to .Mac) site is to click the "Publish" button at the bottom of the iWeb "Site Organizer" list (or to select this same option from the "File" menu.
Every single time I add just a new photo page to my site and click "Publish," iWeb goes onto .Mac and goes through the "Creating Page: ..." process (via the progress bar window that pops up).
This takes forever and since I have not made any changes to any of the pages (except for, I suppose, the name of the new page being added to the list of available photo pages in the list at the top of each page) I do not see why each page needs to be republished.
My point is, I don't understand the second part up the uploading process when the little progress wheel comes up next to each site in the "Site Organizer" menu. It seems like this is when the new content is being added, so why is the first part (the "Creating Page: ...") necessary?
Does iWeb really need to recreate each page every time I want to add a new photo page to my site or is there a quicker way that I am missing?
I'm currently studying abroad and my internet connection leaves something to be desired (in terms of upload speed) so I'm looking to streamline this process as much as possible.
Thanks!!
Allen

It's a 2-step process. 'Creating pages' does exactly what it says. It's like publishing to a local folder, but with .Mac functionality included. Actual uploading to .Mac only commences when page creation is complete. That's when the progress indicator(s) appear, and it's only then that you regain control of the application.
As to your concern that the process takes a long time when you add 'just a new photo page', you go on yourself to explain why doing this necessitates re-creation of every page in the site — it's precisely because of 'the name of the new page being added to the list of available photo pages in the list at the top of each page'. Once you add a page and include this on the navigation bar, every page which displays the navigation bar has to be updated.
[ Visit here for iWeb Tips, Tricks and Hack ]

Updating articles slowness

Is anyone else experiencing problems trying to update articles to their folios? I keep getting a network error and when I don't, it moves at a snail's pace. The DPS Status page doesn't currently show any problems, though...
It says:
The upload has failed. Network failure.

I'm not sure what issues you had last week, but I have absolutely no way to update articles at all right now.

HT1567 I keep getting a pop up window saying that whatever is needed for itunes to burn a CD for me is missing. How do I get it without having my entire library erased?

I keep getting a pop up window saying that whatever is needed for itunes to burn a CD for me is missing. How do I get it without having my entire library erased?

Hello,
I am having problems copying my music to a cd, its stating disc recording not found. Please how can this be fixed. I have uninstall and reinstall several times.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Hewlett-Packard 310-1126
iTunes 11.0.1.12
QuickTime not available
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0027B2E0106D35F0
Current user is not an administrator.
The current local date and time is 2013-01-31 18:45:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4270
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.1.12 (x64) is currently running.
iTunesHelper 11.0.1.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

Problem with AUTO PUBLISH nd update NEW POLICY to Client .

To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
Main Doc
http://www.novell.com/documentation/zesm41/
Your question is answered here:
http://www.novell.com/documentation/...a/bnk7bdx.html
See "Update Interval".
Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
http://support.novell.com/contact/
>>>
From: nxgame<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 12/11/2010 3:06 pm
Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
To : who may concern , which really need urgent help .
after few days of setting up the ZESM , but then i was unable to find
is there any setting which can "AUTO PUBLISH " into the Client side .
Without the Client need to use the manual "UPDATE POLICY " button ?
Because , we find it that to make it silent update without the CLIENT
side need to manually click the UPDATE POLICY , so i would wonder is
there any way to have the AUTO UPDATE the policy from SERVER side ?
thank alot first .
From : NX ( which this few days has been keep on try and explore the
ZESM 3.5 , 4.0 , 4.1IR )
Which really need help in here , due to we are almost to the
end of the setup server and the IT infrastructure .
nxgame
nxgame's Profile: http://forums.novell.com/member.php?userid=99703
View this thread: http://forums.novell.com/showthread.php?t=427947

Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012. Everything installs without error. I have acquired a certificate for SCUP signing from the internal Enterprise CA. I have
verified the signing certificate has a 1024 bit key. I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer. When I attempt to publish a Flash update with Full content I receive the following
error:
2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
I have redone the certificates three times with no luck. I can import metadata, but any attempt to download content results in the verification error.
TIA

Hi Joyce,
This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048. Thank you for being my second set of eyes.
I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
\\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect? In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic."
No Flash updates in the ConfigMgr console are marked as downloaded. I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works.
Comments and suggestions welcome.

My ipod touch is stuck on the 4.2.1 software, its a 3rd gen as well i was just wondering why i can not get the lastest update can you please help me with this issue

i have been having an issue with updating my ipod touch for some time now and i can not seem to get it to update to the lastest update. it is stuck on 4.2.1 software and i can not update it to 4.3 or any other ios software update. can you please help me to solve this issue.

It sounds like you actually have a 2G iPod Touch which can only go as high as iOS 4.2.1. If it's an 8 GB iPod Touch it's definitely a 2G iPod Touch as there was never such a thing as a 3G 8 GB iPod Touch. See this article to help verify what generation iPod Touch you have.
Identifying iPod models
B-rock

AppV5 Office 2013 (Visio) couldn't get published (failed configuration in folder ProgramData\App-V 0x7D401F30-0x5)

Environment:
Server: AppV 5 SP1 Pub and Mgmt server (no Hotfixes applied)
Client: Windows 7 SP1 x64 with AppV 5.0 SP2 client (tried RTM and with HF5)
Created a Visio 2013 package with ODT (latest version). Only Visio, no other products added. Used the PACKAGEGUID to specify a custom PackageGUID.
Configuration.xml;
<Configuration>
<Add SourcePath="C:\Temp\" OfficeClientEdition="32" >
<Product ID="VisioStdVolume">
<Language ID="en-us" />
<Language ID="nl-nl" />
<Language ID="fr-fr" />
</Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="VisioStd2013Setup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
<Property Name="PACKAGEGUID" Value="0123e69c-b152-4c70-b178-41be0d2b7d1b" />
</Configuration>
Adding and Publishing locally with Powershell works like expected. But using the App-V 5.0 Mgmt/Publishing server it fails on all clients.
Package is published to computers.
Domain Computers have READ permission on the AppV Content share.
Previously Office 2013 packages could be published without any errors.
AppV logs:
Event ID: 19104:
Part or all packages publish failed.
published: 0
failed: 1
Please check the error events of 'Configure/Publish Package' before this message for the details of the failure.
Event ID: 1008
Package {0123e69c-b152-4c70-b178-41be0d2b7d1b} version {5197e402-1206-4940-bd96-a0597e7d4b1f} failed configuration in folder 'C:\ProgramData\App-V\0123E69C-B152-4C70-B178-41BE0D2B7D1B\5197E402-1206-4940-BD96-A0597E7D4B1F' with error 0x7D401F30-0x5.
Event ID: 4001
The App-V client failed to create a process for machine script event AddPackage with command line: '"C:\ProgramData\App-V\0123E69C-B152-4C70-B178-41BE0D2B7D1B\5197E402-1206-4940-BD96-A0597E7D4B1F\Root\..\Scripts\Integrator.exe" /I /Msi /License /AppV PackageGUID=0123e69c-b152-4c70-b178-41be0d2b7d1b PackageRoot="C:\ProgramData\App-V\0123E69C-B152-4C70-B178-41BE0D2B7D1B\5197E402-1206-4940-BD96-A0597E7D4B1F\Root" MsiName=SPPRedist.msi,SPPRedist64.msi PidKey=FN8TT-7WMH6-2D4X9-M337T-2342K,YC7DK-G2NP3-2QQC3-J6H88-GVGXT,C2FG9-N6J68-H8BTJ-BW3QX-RM3B3 PRIDName=VisioStdVolume'. Windows error: Access is denied.. The path must be a Windows application (.exe file).
Analytic and Debugs logs aren’t very helpful (Client-Publishing):
No package published.
Published: false
Failed: 0
So, Access denied (0x5) on Integrator.exe in ProgramData? As we have AppLocker in place, checked the AppLocker logs. But no trace in there.
Other AppV5 applications does work
Tested on two different App-V 5 Pub Servers (5.0 SP1 and SP1 with HF4), same behaviour.
Tested on three Win7 SP1 x64 clients, same behaviour.
EnablePackageScripts (client config) is enabled on all clients.
Issue was
reported before on the forums, but Domain Users and Domain Computers have already READ permissions to the AppV Content Share (NTFS permissions) where the .appv file is stored.
Added (as a test) Domain Computers and Everyone Full Control to c:\ProgramData\App-V, doesn’t solve it.
Cannot use ProcMon, because the Publish event occurs before user login.
I’m out of ideas. Someone that could assist me please?

The above fix was a lucky shot.
This solved it (hopefully) for good;
http://www.the-d-spot.org/wordpress/2014/11/05/appv5-office-2013-package-cannot-be-published-access-is-denied-on-integrator-exe/

How do I restore without updating software from 1.2.1. to 1.3

Here's my dilema, and hopfully someone can advise how to fix it:
I have a Pioneer AVH-P5900DVD (car stereo) and it is compatible with iPod's, which have software version 1.2.1., but no higher.
I have a 5th gen iPod which had version 1.2.1., but I accidentally updated the software via iTunes to 1.3. Now the iPod wont work with the car stereo.
I couldn't find out how to downgrade the software from 1.3 to 1.2.1., so I managed to find a 2nd hand 5th gen ipod on eBay, which had 1.2.1. When I connected it to iTunes to transfer my music onto it, it stated that its formatted for Mac, rather than Windows, so I had to re-format the drive. iTunes then stated that I need to restore the iPod, and when I do this, it will only let me restore it with the latest version of the software (1.3). I do not want to do this.
I found the software folders in my computer, and it seems that the earliest version i have is 1.2.3, and iTunes did give me the option of retoring with this version. But it wont work with my Pioneer stereo, which will only work with 1.2.1. or earlier.
So, I either need to:
1) downgrade my original iPod from 1.3. to 1.2.1.
2) restore my new iPod (which has 1.2.1. installed), without updating to 1.3
3) find and download the software files for 1.2.1. from the web, but I cant find them. They should be called: -
iPod_25.1.2.1.ipsw
iPod_25.1.2.1.ipsw.signature
If I managed to get hold of these, I could add them to my computer, then iTunes should allow me to choose 1.2.1. as a restore version on my new iPod.
If anyone knows the solutions for 1 or 2, or where I can get the above mentioned files, please let me know.
[email protected]
Thanks

I managed to find the .ipsw files on an old laptop, which enabled me to restore both ipods to 1.2.1.
Problem solved.

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Local Folio hyperlinks get published without updating article

Similar Messages

Maybe you are looking for