Local Mailbox Move Fails mapiexceptionmaxsubmissionexceed hr=0x80004005, ec=1242
Hi, having a major problem moving a mailbox to a new database with the below error. All input greatly received as have trawled forums with no other similar reported issues...
Running DAG on SP3 UR5
Mailbox is 590GB and move fails at 70% with the error
FailureCode :
-2147467259
FailureType : MapiExceptionMaxSubmissionExceeded
FailureSide : Target
Message :
Error: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005,ec=1242)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc
called [length=6090]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc
returned [ec=0x0][length=660][latency
=15]
Lid: 23226 --- ROP
Parse Start ---
Lid: 27962 ROP:
ropWriteStream [45]
Lid: 27962 ROP:
ropSaveChangesMessage [12]
Lid: 17082 ROP Error:
0x4DA
Lid: 18273
Lid: 21921 StoreEc:
0x4DA
Lid: 27962 ROP:
ropExtendedError [250]
Lid: 1494
---- Remote Context Beg ----
Lid: 1238
Remote Context Overflow
Lid: 46509
Lid: 40193 StoreEc:
0x8004010F
Lid: 5587
StoreEc: 0x8004010F PropTag: 0x30130102
Lid: 21970 StoreEc:
0x8004010F PropTag: 0x668F0040
Lid: 14164 StoreEc:
0xFFFFFA1D PropTag: 0x676D0102
Lid: 8660
StoreEc: 0x8004010F PropTag: 0x676D0102
Lid: 18658
Lid: 11956 StoreEc:
0x8004010F PropTag: 0x676D0102
Lid: 15604 StoreEc:
0x8004010F PropTag: 0x676D0102
Lid: 14164 StoreEc:
0xFFFFFA1D PropTag: 0x676C0102
Lid: 8660
StoreEc: 0x8004010F PropTag: 0x676C0102
Lid: 18658
Lid: 11956 StoreEc:
0x8004010F PropTag: 0x676C0102
Lid: 15604 StoreEc:
0x8004010F PropTag: 0x676C0102
Lid: 64319 dwParam:
0x249F0
Lid: 39743 dwParam:
0x256FC
Lid: 45016 StoreEc:
0x4DA
Lid: 57304
Lid: 5041
StoreEc: 0x4DA
Lid: 4465
StoreEc: 0x4DA
Lid: 6926
StoreEc: 0x4DA
Lid: 1750
---- Remote Context End ----
Lid: 31418 --- ROP
Parse Done ---
Lid: 21457
Lid: 19665 StoreEc:
0x4DA
FailureTimestamp : 09/04/2014 00:39:59
FailureContext : --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (867634f2-b8a2-491b-a6f2-05c380b6a04b)
Key: 94ECA0233E4D6B4B9B1C80F9970AA564F2347686A2B81B49A6F205C380B6A04BE0CA914F6695624
C98892FA527AAA91E
SyncStateLength: 157016438
IsValid : True
ValidationMessage :
RequestGuid : 23a0ec94-4d3e-4b6b-9b1c-80f9970aa564
RequestQueue : MDBVAULT2013
Identity : RequestGuid (867634f2-b8a2-491b-a6f2-05c380b6a04b), RequestQueue: (39190241-8017-4d2
0-b07d-aa8df3422311)
Report :
Entered a bad item limit of 80000 and there were 48388 bad items reported before the failure.
The mailbox and database storage limits are unlimited and the global transport limits have been increased several times and the move resumed with no change.
Have run a mailbox repair request and created a new move request to a new blank DB - same failure at 70%
Last items in the request log are:
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary (867634f2-b8a2-491b-a6f2-05c380b6a04b)
OpCode: TransferBuffer
DataLength: 21512</errorContext>
</baditem>
09/04/2014 00:39:38 [] A corrupted item was encountered during the move operation. The item wasn't copied to the destination mailbox.
<baditem errorType="MapiExceptionInvalidParameter" errorCode="0x80070057" flags="0x00000000" id="00000000D10CBF313300994889EE03CA73B8702007006D294C32D92E5942AC2E635026C560020000008A007600006D294C32D92E5942AC2E635026C56002000036CC54300000">
<folder id="00000000D10CBF313300994889EE03CA73B8702001006D294C32D92E5942AC2E635026C560020000008A00760000">Inbox</folder>
<sender>Microsoft Outlook</sender>
<recipient></recipient>
<subject>AP Data Dump P1 to P9 V2 system</subject>
<messageClass>IPM.Note</messageClass>
<size>336648</size>
<dateSent>10/03/2013 14:13:02</dateSent>
<dateReceived>10/03/2013 14:13:02</dateReceived>
<errorMessage>MapiExceptionInvalidParameter: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80070057, ec=-2147024809)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=20303]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=685][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropFXDstCopyConfig [83]
Lid: 27962 ROP: ropTellVersion [134]
Lid: 27962 ROP: ropFXDstPutBufferEx [157]
Lid: 17082 ROP Error: 0x80070057
Lid: 31329
Lid: 21921 StoreEc: 0x80070057
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 27034 StoreEc: 0x80040102
Lid: 20234
Lid: 3625 StoreEc: 0x80040102
Lid: 32762 dwParam: 0x371284B0
Lid: 32762 dwParam: 0x370B0003
Lid: 32762 dwParam: 0xE200003
Lid: 32762 dwParam: 0xFF70003
Lid: 32762 dwParam: 0x30070040
Lid: 32762 dwParam: 0x30080040
Lid: 32762 dwParam: 0x37050003
Lid: 32762 dwParam: 0x370E84B0
Lid: 32762 dwParam: 0x300184B0
Lid: 32762 dwParam: 0xFF90102
Lid: 50223
Lid: 14012 StoreEc: 0x80070057
Lid: 39487
Lid: 33551 StoreEc: 0x80070057
Lid: 49935
Lid: 55871 StoreEc: 0x80070057
Lid: 48163
Lid: 64547 StoreEc: 0x80070057
Lid: 36807
Lid: 53645 StoreEc: 0x80070057
Lid: 1445 StoreEc: 0x80070057
Lid: 24385
Lid: 1653 StoreEc: 0x80070057
Lid: 21674
Lid: 2761 StoreEc: 0x80070057
Lid: 28570 StoreEc: 0x80070057
Lid: 29738
Lid: 3401 StoreEc: 0x80070057
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80070057
Lid: 22630 </errorMessage>
<errorContext>--------
Operation: IMapiFxProxy.ProcessRequest
OpCode: TransferBuffer
DataLength: 31680
Operation: IMapiFxProxy.ProcessRequest
OperationSide: Target
Primary (867634f2-b8a2-491b-a6f2-05c380b6a04b)
OpCode: TransferBuffer
DataLength: 31680</errorContext>
</baditem>
09/04/2014 00:39:38 [] Stage: CopyingMessages. Percent complete: 70.
09/04/2014 00:39:38 [] Copy progress: 2802239/4302880 messages, 385.1 GB (413,515,837,177 bytes)/589.6 GB (633,035,651,094 bytes).
09/04/2014 00:39:59 [] Fatal error MapiExceptionMaxSubmissionExceeded has occurred.
Error details: MapiExceptionMaxSubmissionExceeded: Unable to save changes. (hr=0x80004005, ec=1242)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=6090]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=660][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropWriteStream [45]
Lid: 27962 ROP: ropSaveChangesMessage [12]
Lid: 17082 ROP Error: 0x4DA
Lid: 18273
Lid: 21921 StoreEc: 0x4DA
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 46509
Lid: 40193 StoreEc: 0x8004010F
Lid: 5587 StoreEc: 0x8004010F PropTag: 0x30130102
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 14164 StoreEc: 0xFFFFFA1D PropTag: 0x676D0102
Lid: 8660 StoreEc: 0x8004010F PropTag: 0x676D0102
Lid: 18658
Lid: 11956 StoreEc: 0x8004010F PropTag: 0x676D0102
Lid: 15604 StoreEc: 0x8004010F PropTag: 0x676D0102
Lid: 14164 StoreEc: 0xFFFFFA1D PropTag: 0x676C0102
Lid: 8660 StoreEc: 0x8004010F PropTag: 0x676C0102
Lid: 18658
Lid: 11956 StoreEc: 0x8004010F PropTag: 0x676C0102
Lid: 15604 StoreEc: 0x8004010F PropTag: 0x676C0102
Lid: 64319 dwParam: 0x249F0
Lid: 39743 dwParam: 0x256FC
Lid: 45016 StoreEc: 0x4DA
Lid: 57304
Lid: 5041 StoreEc: 0x4DA
Lid: 4465 StoreEc: 0x4DA
Lid: 6926 StoreEc: 0x4DA
Lid: 1750 ---- Remote Context End ----
Lid: 31418 --- ROP Parse Done ---
Lid: 21457
Lid: 19665 StoreEc: 0x4DA
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.UpdateMessage(T obj, GetAdditionalProperties getAdditionalPropertiesCallback)
at Microsoft.Exchange.MailboxReplicationService.MoveObjectInfo`1.UpdateMessage(T obj)
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncStateStr)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass57.<Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState>b__56()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.SaveSyncState(Byte[] key, String syncState)
at Microsoft.Exchange.MailboxReplicationService.MailboxCopierBase.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveSyncState(SaveStateFlags flags)
at Microsoft.Exchange.MailboxReplicationService.BaseJob.SaveState(SaveStateFlags flags, UpdateRequestDelegate updateRequestDel)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.WriteMessages(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.SaveSyncState
OperationSide: Target
Primary (867634f2-b8a2-491b-a6f2-05c380b6a04b)
Key: 94ECA0233E4D6B4B9B1C80F9970AA564F2347686A2B81B49A6F205C380B6A04BE0CA914F6695624C98892FA527AAA91E
SyncStateLength: 157016438
09/04/2014 00:40:24 [] Relinquishing job.
Thanks for the feedback - have increased the baditemlimit to 500000 items (from 80000) and resumed, failed after 10 mins and the item transferred count increased by 3000 so some progress made. The number of baditems detected remained at the 51362.
The last entries in the URL above refer to mailbox storage, which I've looked into and set to unrestricted.
Have the following settings in place:
mailbox storage quota set to unrestricted
source and target database storage limits set to unrestricted
global transport limit - increased from 75MB to 150MB
Annoyingly this mapiexecptionmaxsubmissionexceeded error doesn't shed any other light on the cause apart from the issue being on the target end. The original transfer was on SP2 UR7, I've then retried now on SP3 UR5 to see if this would
make a difference - no joy
The corrupt items in the move request log are calendar items - is there a way to prevent calendar items from being included in a suspended move request?
Similar Messages
-
Running Exchange 2010 SP1. I'm trying to move a mailbox to another exchange server running the same version. It's failing at 95%
Error: MapiExceptionNoSupport: IExchangeFastTransferEx.TransferBuffer failed (hr=0x80040102, ec=-2147221246)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=953]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=673][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropFXDstCopyConfig [83]
Lid: 27962 ROP: ropTellVersion [134]
Lid: 27962 ROP: ropFXDstPutBufferEx [157]
Lid: 17082 ROP Error: 0x80040102
Lid: 31329
Lid: 21921 StoreEc: 0x80040102
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 1238 Remote Context Overflow
Lid: 25008 dwParam: 0x3
Lid: 24932
Lid: 4367 StoreEc: 0x80040102
Lid: 7695 StoreEc: 0x80040102
Lid: 19936
Lid: 4559 StoreEc: 0x80040102
Lid: 21802
Lid: 19994 StoreEc: 0x80040102
Lid: 20202
Lid: 3305 StoreEc: 0x80040102
Lid: 32762 dwParam: 0xE080003
Lid: 32762 dwParam: 0xE230003
Lid: 32762 dwParam: 0xE270102
Lid: 32762 dwParam: 0xE580102
Lid: 32762 dwParam: 0xE590102
Lid: 32762 dwParam: 0xF000102
Lid: 32762 dwParam: 0xFF40003
Lid: 32762 dwParam: 0x10F4000B
Lid: 32762 dwParam: 0x10F5000B
Lid: 32762 dwParam: 0x10F6000B
Lid: 32762 dwParam: 0x300184B0
Lid: 32762 dwParam: 0x300484B0
Lid: 32762 dwParam: 0x301D0003
Lid: 32762 dwParam: 0x3FE4000B
Lid: 32762 dwParam: 0x3FE70003
Lid: 32762 dwParam: 0x3FE5000B
Lid: 26346
Lid: 4073 StoreEc: 0x80040102
Lid: 28570 StoreEc: 0x80040102
Lid: 29738
Lid: 3401 StoreEc: 0x80040102
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x80040102
Lid: 22630
I've tried using PFDAVAdmin but I'm getting a 404 error when trying to do make any changes.
Anyone have any suggestions?
ThanksCurious as why you are not already on at least SP2. SP1 support expired 6 months ago :(
Please note this is already fixed in Sp2 RU1
http://support.microsoft.com/kb/2579051/en-gb
and as documented in that KB, export to PST and import is one workaround.
Note that SP2 support will expire next April.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
Facebook:
XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Autodiscover fails after mailbox move
Hello,
Environment: existing exchange 2010 org, with new Exchange 2013 introduced. Clients are Outlook 2013. Clients can connect to all mailbox on the 2010 Server, also can connect to new mailboxes on the 2013 Server. But if I move an existing mailbox from
the 2010 Server to the 2013 server Outlook cannot connect anymore, because autodiscover fails. Both servers use the same autodiscover settings, SCP contains the same URL.
TIA
Update: I've just installed an Outlook 2010 for testing purposes and it is working! From this point it may be rather a client side problem than a server side...Hey there,
I actually installed 2013 using the CU5 install files. So you are right, CU5 does not matter from a first look, but it does matter overall for this issue. Keep reading.
Tangent: This appears to be unrelated but I will mention it anyways. I noticed, after the mailbox was migrated that when I am on the internal network, autodiscover fails the same way it does for you. However, when I bring the client off the corporate network
and have it connect via the public Internet, autodiscover suceeds. When testing with EXRCA autodiscover also succeeds. Please do note that external access to Exchange is handled by Microsoft's Web Application Proxy. This proxy performs "pass-through"
authentication of autodiscover so that may have something to do with it.
Back to the main issue of Outlook staying disconnected after the migration. I wasn't going anywhere with this so I opened a case with Microsoft. I was able to replicate the problem with the support tech and they were also able to replicate this in
their lab. This was the conclusion:
This is a known issue. It happens because when a mailbox is moved to 2013, the mailbox itself still has a cache entry that points the client back to the 2010 server. From what Microsoft said, this cache expires in an "undetermined" time interval
for Exchange 2013 SP1 up to CU4 and every "2 to 2.5 hours" in Exchange 2013 CU5. They could not reference a KB article with this info.
Microsoft mentioned that the cache is also cleared when recycling the IIS Application Pool that runs RPC on the 2013 CAS server which is also caused by an IISreset. However, I have not been able to verify the application pool recycle method in my tests.
From what I can see, IISreset is the only way to clear the cache. I have sent a follow-up to Microsoft asking which App Pools specifically need to be recycled to avoid having to perform a full IISreset. I will test and report back here.
In any case, here is my strategy moving forward which was blessed by the Microsoft team:
Create a migration batch for a number of users (in my case I will make it 5 to 10 users at a time)
Select to "Manually Complete the batch" in the "New Local Mailbox Move" window. This process will migrate 95% of the mailbox and then stop.
Once the migration has gone through 95% and it stops syncing, the batch shows as "synced" on the migration window. Until this point in the process, users are able to use Outlook without any interruption and the move is invisible to them.
When I am ready to finish the migration, I will select to "Complete This Migration Batch" on the ECP Migration screen. At this time, users that have Outlook open will receive a prompt to
restart it. When Outlook re-opens it will show as "Disconnected" until the next step is performed.
Once the batch shows as "completed" I will perform an IISreset on the 2013 CAS server (or recycle the appropriate app pools once Microsoft provides them to me.) At this time, Outlook will show as "Connected to Microsoft Exchange" and
users will receive a second prompt to restart Outlook. After the second restart you'll be good to go!
I will try to time my migration so they complete after hours, when most people are less likely to have Outlook open. Don't forget, that the cache entry that causes all these issues is cleared after about 2 to 2.5 hours if you are on 2013 CU5. In any
case, I think it's better if you have control over when the migration finishes by opting to complete it manually.
Hope this helps.
Fable
EDIT: Microsoft has confirmed that recycling the following Application Pools makes Outlook connect to Exchange 2013:
Exchange 2013 CAS Server:
MSExchangeAutodiscoverAppPool
MSExchangeRpcProxyFrontEndAppPool
Exchange 2013 Mailbox Server:
MSExchangeAutodiscoverAppPool
MSExchangeRpcProxyAppPool
If you decide to not do an iisreset and opt for recycling the App Pools instead, be advised that after the AppPools are recycled, Outlook connects to Exchange and asks to be restarted. If you close Outlook and immediately open it again, you will be prompted
with a username and password pop-up (At least I was in all my tests of this method.) This issue is resolved if, after you close Outlook, wait 5 to 10 minutes before you re-open it. You will not be prompted for a user/pass at this point. -
Single Mailbox Move to 2013 Fails with Job Hasnt Made Progress Since Error
I migrated from 2010 to 2013 and only one mailbox fails to move. I can move it within the 2010 mailbox databases but I cannot get it to migrate to a 2013 database. The migration takes a loong time to move the 500MB mailbox and eventually will
fail with an error stating the following
"This job hasn't made progress since {date / time}. I have tried to move it several times and it fails with the same error each time. All other mailboxes in the entire environment have been successful with no issues. I moved it to
another 2010 mailbox database with no issues but the 2013 move failed again afterwards.
Any ideas what the issue could be?thanks for the idea. I ran it and got the info below. That error seems interesting. I looked it up and found this: https://social.technet.microsoft.com/Forums/exchange/en-US/5da9b81d-8665-4476-954c-98d1a8418ab1/exchange-2013-mailbox-newmoverequest-from-exchange-2007-sp3-transient-error-invalid-parent-folder?forum=exchangesvradmin
Deleted that and re-running the migration to see if it fixed it.
RunspaceId : 08044fd1-eb9e-4338-b994-fed7d49bbec9
MailboxIdentity : domain.com/vertical/Sugarloaf/first last
DistinguishedName : CN=first last,OU=Sugarloaf,OU=vertical,DC=domain,DC=com
DisplayName : first last
Alias : away
ExchangeGuid : da92ca09-6fbc-45c1-8417-4868253a4a2b
ArchiveGuid :
Status : InProgress
StatusDetail : TransientFailure
SyncStage : CreatingFolderHierarchy
Flags : IntraOrg, Pull, MoveOnlyPrimaryMailbox
RequestStyle : IntraOrg
Direction : Pull
IsOffline : False
Protect : False
DoNotPreserveMailboxSignature : True
Priority : Normal
WorkloadType : Local
Suspend : False
SuspendWhenReadyToComplete : False
IgnoreRuleLimitErrors : False
RecipientTypeDetails : UserMailbox
SourceVersion : Version 14.3 (Build 224.0)
SourceDatabase : 2GB Limit
SourceServer : domain-mbx02.domain.com
TargetVersion : Version 15.0 (Build 1076.0)
TargetDatabase : Brandvertical
TargetServer : domain-exch02.domain.com
SourceArchiveDatabase :
SourceArchiveVersion :
SourceArchiveServer :
TargetArchiveDatabase :
TargetArchiveVersion :
TargetArchiveServer :
RemoteHostName :
RemoteGlobalCatalog :
BatchName : MigrationService:away2
StartAfter :
CompleteAfter :
RemoteCredentialUsername :
RemoteDatabaseName :
RemoteDatabaseGuid :
RemoteArchiveDatabaseName :
RemoteArchiveDatabaseGuid :
TargetDeliveryDomain :
ArchiveDomain :
BadItemLimit : 38
BadItemsEncountered : 0
LargeItemLimit : 0
LargeItemsEncountered : 0
AllowLargeItems : True
QueuedTimestamp : 4/3/2015 3:21:09 PM
StartTimestamp : 4/3/2015 3:21:50 PM
LastUpdateTimestamp : 4/3/2015 3:32:49 PM
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp :
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 00:11:58.9006936
TotalFinalizationDuration : 00:00:00
TotalDataReplicationWaitDuration : 00:00:00
TotalSuspendedDuration : 00:00:00
TotalFailedDuration : 00:00:00
TotalQueuedDuration : 00:00:01.7030234
TotalInProgressDuration : 00:11:57.1976702
TotalStalledDueToCIDuration : 00:00:00
TotalStalledDueToHADuration : 00:00:00
TotalStalledDueToMailboxLockedDuration : 00:00:00
TotalStalledDueToReadThrottle : 00:00:00
TotalStalledDueToWriteThrottle : 00:00:00
TotalStalledDueToReadCpu : 00:00:00
TotalStalledDueToWriteCpu : 00:00:00
TotalStalledDueToReadUnknown : 00:00:00
TotalStalledDueToWriteUnknown : 00:00:00
TotalTransientFailureDuration : 00:09:55.2540301
TotalProxyBackoffDuration : 00:00:00
TotalIdleDuration : 00:00:00
MRSServerName : domain-exch02.domain.com
TotalMailboxSize : 509.1 MB (533,870,270 bytes)
TotalMailboxItemCount : 6941
TotalArchiveSize :
TotalArchiveItemCount :
BytesTransferred : 6.626 MB (6,948,288 bytes)
BytesTransferredPerMinute : 0 B (0 bytes)
ItemsTransferred : 0
PercentComplete : 10
CompletedRequestAgeLimit : 7.00:00:00
PositionInQueue :
InternalFlags : SkipFolderPromotedProperties, SkipKnownCorruptions
FailureCode :
FailureType :
FailureSide :
Message :
FailureTimestamp :
IsValid : True
ValidationMessage :
RequestGuid : d91f6b26-7178-4d38-946e-6778ae6215cf
RequestQueue : Brandvertical
Identity : domain.com/vertical/Sugarloaf/first last
DiagnosticInfo :
Report : 4/3/2015 3:21:09 PM [domain-exch02] '' created move request.
4/3/2015 3:21:15 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:21:15 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:21:15 PM [domain-exch02] Sync state for request
d91f6b26-7178-4d38-946e-6778ae6215cf is null.
4/3/2015 3:21:15 PM [domain-exch02] Restarting the move because checkpoint data
doesn't exist or is invalid in 'da92ca09-6fbc-45c1-8417-4868253a4a2b
(Primary)'.
4/3/2015 3:21:15 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:21:15 PM [domain-exch02] Request processing started.
4/3/2015 3:21:15 PM [domain-exch02] Source mailbox information:
Regular Items: 3393, 228.6 MB (239,724,362 bytes)
Regular Deleted Items: 3420, 280.5 MB (294,145,908 bytes)
FAI Items: 128, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
4/3/2015 3:21:15 PM [domain-exch02] Cleared sync state for request
da92ca09-6fbc-45c1-8417-4868253a4a2b due to 'CleanupOrphanedMailbox'.
4/3/2015 3:21:15 PM [domain-exch02] An old copy of the mailbox was removed from
the destination database. The operation will try again in 30 seconds.
4/3/2015 3:21:50 PM [domain-exch02] Mailbox signature will not be preserved for
mailbox 'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)'. Outlook clients
will need to restart to access the moved mailbox.
4/3/2015 3:21:50 PM [domain-exch02] Stage: CreatingFolderHierarchy. Percent
complete: 10.
4/3/2015 3:21:50 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:21:50 PM [domain-exch02] Folder creation progress: 0 folders created
in mailbox 'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)'.
4/3/2015 3:21:57 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (1/60).
4/3/2015 3:22:30 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:22:30 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:22:30 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:22:30 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:22:30 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:22:34 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (2/60).
4/3/2015 3:23:05 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:23:05 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:23:05 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:23:05 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:23:05 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:23:10 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (3/60).
4/3/2015 3:23:40 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:23:40 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:23:40 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:23:41 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:23:41 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:23:45 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (4/60).
4/3/2015 3:24:21 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:24:21 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:24:21 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:24:21 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:24:21 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:24:25 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (5/60).
4/3/2015 3:24:56 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:24:56 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:24:56 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:24:56 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:24:56 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:25:00 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (6/60).
4/3/2015 3:25:31 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:25:31 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:25:31 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:25:31 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:25:31 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:25:35 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (7/60).
4/3/2015 3:26:06 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:26:06 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:26:06 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:26:06 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:26:06 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:26:10 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (8/60).
4/3/2015 3:26:42 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:26:42 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:26:42 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:26:42 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:26:42 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:26:46 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (9/60).
4/3/2015 3:27:17 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:27:17 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:27:17 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:27:17 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:27:17 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:27:17 PM [domain-exch02] Folder creation progress: 0 folders created
in mailbox 'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)'.
4/3/2015 3:27:21 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (1/60).
4/3/2015 3:27:52 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:27:52 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:27:52 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:27:52 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:27:52 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:27:56 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (2/60).
4/3/2015 3:28:27 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:28:27 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:28:27 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:28:27 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:28:27 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:28:32 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (3/60).
4/3/2015 3:29:03 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:29:03 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:29:03 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:29:03 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:29:04 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:29:08 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (4/60).
4/3/2015 3:29:38 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:29:38 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:29:38 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:29:39 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:29:39 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:29:43 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (5/60).
4/3/2015 3:30:14 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:30:14 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:30:14 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:30:14 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:30:14 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:30:18 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (6/60).
4/3/2015 3:30:54 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:30:54 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:30:54 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:30:54 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:30:54 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:30:58 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (7/60).
4/3/2015 3:31:29 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:31:29 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:31:29 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:31:29 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:31:29 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:31:34 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (8/60).
4/3/2015 3:32:09 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:32:09 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:32:09 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:32:09 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:32:09 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:32:14 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (9/60).
4/3/2015 3:32:44 PM [domain-exch02] The Microsoft Exchange Mailbox Replication
service 'domain-exch02.domain.com' (15.0.1076.6 caps:1FFF) is examining the request.
4/3/2015 3:32:44 PM [domain-exch02] Connected to target mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database 'Brandvertical',
Mailbox server 'domain-exch02.domain.com' Version 15.0 (Build 1076.0).
4/3/2015 3:32:44 PM [domain-exch02] Connected to source mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)', database '2GB Limit',
Mailbox server 'domain-mbx02.domain.com' Version 14.3 (Build 224.0).
4/3/2015 3:32:44 PM [domain-exch02] Request processing continued, stage
CreatingFolderHierarchy.
4/3/2015 3:32:44 PM [domain-exch02] Initializing folder hierarchy from mailbox
'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)': 177 folders total.
4/3/2015 3:32:44 PM [domain-exch02] Folder creation progress: 0 folders created
in mailbox 'da92ca09-6fbc-45c1-8417-4868253a4a2b (Primary)'.
4/3/2015 3:32:49 PM [domain-exch02] Transient error InvalidParentFolderException
has occurred. The system will retry (1/60).
ObjectState : New -
How to remove failed mailbox move request
Hi all,
Exchange 2010 SP1
i canceled or move failed on several mailboxes. How can I move these mailboxes again since
they still have move request checked?
Thank you.Hi JaneHHH,
Here are some examples:
To just remove the failed moverequests in EMS, RUN Get-Moverequest -MoveStatus Failed | remove-moverequest
Move all moverequests in EMS, RUN get-moverequest | remove-moverequest
You can of course also remove them in EMC, but a simple right-click the once you want to move in EMC|Recipient Configuration|Move Requests and choose "Clear Move Requests"
:Martina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Some Mailbox Moves Keep Failing
Trying to perform mailbox moves from Exchange 2010 to Exchange 2013 environment. Both are up to the latest CU and Service Pack. Most moves finish successfully. I have a couple so far that transfer data for some time then fail with the following error.
Error: MapiExceptionTooBig: IExchangeFastTransferEx.SetPerUser failed
I have attempted the moves a couple times, even adding the AllowLargeItems switch. I have tried through ecp and powershell using both New-MoveRequest and New-MigrationBatch cmdlets.
Any ideas?Thanks again for responding. I really appreciate the help.
I combined a few of the suggestions...I moved one of the mailboxes in question to another 2010 DB with no issue, I increased the BadItemLimit and due to the fact that inheritance was already checked I ran -ApplyMandatoryProperties (I stopped there to
see the results). The mailbox is still moving (as it takes a really, really long time) and my assumption is that it will still fail. I wanted to provide and update as to the status.
This time though, I ran get-MoveRequestStatistics <mailbox> -IncludeReport and what I saw was the following:
Status: InProgress
StatusDetail: Transient failure
Then the log loops through the same failure over and over again. It gets to a point where "FinalIncrementalSync" is 95% complete and then I receive the "Transient error MapiExceptionTooBig has occurred." As mentioned, it just keeps retrying
this same process as indicated in the log.
5/15/2014 4:24:44 PM [servername] The Microsoft Exchange Mailbox Replication
service 'serverfqdn'(15.0.847.31
caps:03FF) is examining the
request.
5/15/2014 4:24:44
PM [servername] Connected to target mailbox 'Primary
(mbxguid)', database
'DB29', Mailbox server
'serverfqdn' Version
15.0 (Build 847.0).
5/15/2014 4:24:44
PM [servername] Connected to source mailbox 'Primary
(mbxguid)', database
'DB003', Mailbox server
'2010mbxfqdn' Version
14.3 (Build 158.0).
5/15/2014 4:24:44
PM [servername] Request processing continued, stage
IncrementalSync.
5/15/2014 4:24:45
PM [servername] Folder hierarchy changes reported in source
'Primary (mbxguid)':
1 changed folders, 0
deleted folders.
5/15/2014 4:24:45
PM [servername] Incremental Sync 'Primary
(mbxguid)' completed:
1 hierarchy updates, 0
changed messages.
5/15/2014 4:24:45
PM [servername] Stage: IncrementalSync. Percent complete:
95.
5/15/2014 4:24:45
PM [servername] Final sync has started.
5/15/2014 4:24:46
PM [servername] Folder hierarchy changes reported in source
'Primary (mbxguid)':
0 changed folders, 1
deleted folders.
5/15/2014 4:24:46
PM [servername] Incremental Sync 'Primary
(mbxguid)' completed:
1 hierarchy updates, 0
changed messages.
5/15/2014 4:24:46
PM [servername] Source mailbox information:
Regular Items: 23857,
938.8 MB (984,358,213 bytes)
Regular Deleted
Items: 11786, 174.1 MB (182,595,699 bytes)
FAI Items: 351,
0 B (0 bytes)
FAI Deleted Items:
0, 0 B (0 bytes)
5/15/2014 4:24:46
PM [servername] Stage: FinalIncrementalSync. Percent
complete: 95.
5/15/2014 4:24:47
PM [servername] Transient error MapiExceptionTooBig has
occurred. The system
will retry (1/60). -
Exchange 2013 shell mailbox move requests showing up on 2010 hub server
We're in the process of migrating from exchange 2010 to 2013. All servers are patched and up to date. We have two 2010 CASs (one for external OWA use only) and a mailbox cluster. Our exchange 2013 setup is almost a mirror with the exceptions of how the exchange
server roles have changed.
Any new-moverequest commands entered from the either of our exchange 2013 CAS servers fail to show up in the EAC/recipients/migration page.
If the local move request is done in the EAC the batch(es) show up just fine.
The more perplexing part is: while I was going through a 2010 hub (looking for a different issue) I noticed ALL the batches/mailbox moves that weren't showing up in the 2013 EAC were listed in the 2010 move request section.
I can't get any info on the moves in the 2010 console (because they're 2013 jobs) but i can get statistics and such from a 2013 shell.
any ideas?Are you running ex2013SP1 CU6? Can you try to update n check?
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Exchange 2003 to 2010 mailbox migration fails
I'm trying to move users from my single 2003 server to my 2010 3-node DAG.
I get this error for several of the mailboxes I'm moving:
Error: Mailbox changes failed to replicate. Database 33da328a-9b34-43ba-8914-1be08f143e17 doesn't satisfy the constraint SecondCopy because the commit time 2/14/2014 9:01:30 AM isn't guaranteed by replication time 2/14/2014 8:55:22 AM.
When I manually kick off a move I notice the CQL and the RQL will sometimes get in the hundreds on my third server.
I queued up about 40 users totaling about 45 GB to be moved last night and 11 of them failed with the above error.
I have a very simple setup.
3 servers
1 DAG
1 active DB and 2 passive copies
All servers are virtualized with each running on a separate host
Each VM is connected to a NetApp SAN via iSCSI
All 3 VMs have 2 redundant connections per vNIC and are connected to 2 different switches
All 3 VMs are local, none are remote
The MSExchangeMailboxReplication.exe.config looks like this:
MaxMoveHistoryLength = "2"
MaxActiveMovesPerSourceMDB = "5"
MaxActiveMovesPerTargetMDB = "5"
MaxActiveMovesPerSourceServer = "50"
MaxActiveMovesPerTargetServer = "5"
MaxTotalMovesPerMRS = "100"
I know about setting the DataMoveReplicationConstraint to None trick but I don't think I need to do that since none of my databases are on a WAN. Shouldn't my local moves be able to keep up? That sounds like a band-aid and not a true fix
to the underlying problem.
Could this be an issue with the source server's disk speed?
I've turned the firewalls off on all the servers but still encountered the errors.
My content indexes are healthy.
I've checked the switches and the VMware servers for misconfigurations and errors.
I'm researching the various PerfMon counters to watch now to see if it could be disk-related.I've been watching this server over the past couple of days and researching the performance output.
==========
Good Server:
Physical Disk: Avg. Disk sec/Read (DB): Usually between 10 and 50
Physical Disk: Avg. Disk sec/Write (LOGS): Less than 10
Bad Server:
Physical Disk: Avg. Disk sec/Read (DB): Constant spikes to 100 (1-2 times every 10 seconds)
Physical Disk: Avg. Disk sec/Write (LOGS): Spikes to 30-40 2-3 times per 10 second interval
The % Processor Time rarely hits 10
The Avg. Disk sec/Transfer for C: is mostly 0
Bytes Received/sec MAPI is less than 10 with spikes to 45. This is a Passive node so that's to be expected.
Bytes Received/sec iSCSI is 100 steady with no drops
Bytes Receied/sec REPL is less than 10
Bytes Sent/sec MAPI spikes from 10-20
Bytes Sent/sec iSCSI usually stays at 100 with the occasional drop to 10
Bytes Send/sec REPL is less than 10
Output Queue Length for all three NICs is 0
No Received or Outbound Packet Errors
==========
The vSphere versions of both physical servers are identical as is all of the firmware.
Regarding the guest OS on each, the good server has an older NIC (vmxnet3) driver, whereas the bad server has a newer driver.
The iSCSI Initiator on each guest OS is the same version.
The switch configs are identical for every iSCSI port and there are no errors on either. -
MailBox Move Error With Exchange 2010 sp3
I initiated a mailbox move for a specific mailbox and let it run all night. The next day, the user stated he cannot log into is mailbox and the error stated "mailbox is moving, check back later".
Exchange stated the status of the move is "CompletedWithError". I noticed that the mailbox is still in the old database.
I tried to remove the move request and received an error "couldn't find a move request that corresponds to this identity".
I rebooted the exchange server.
Exchange still shows the user in the old database
There is no move requests in exchange
The user is still experiencing the same error "You weren't able ti sign in because the mailbox is being move"
I tried to initiated another move and received:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
John, Doe
Failed
Error:
Couldn't switch the mailbox into Sync Source mode.
This could be because of one of the following reasons:
Another administrator is currently moving the mailbox.
The mailbox is locked.
The Microsoft Exchange Mailbox Replication service (MRS) doesn't have the correct permissions.
Network errors are preventing MRS from cleanly closing its session with the Mailbox server. If this is the case, MRS may continue to encounter this error for up to 2 hours - this duration is controlled by the TCP KeepAlive settings on the Mailbox server.
Wait for the mailbox to be released before attempting to move this mailbox again.
MapiExceptionMailboxInTransit: Unable to open message store. (hr=0x80004005, ec=1292)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=163]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=264][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLogon [254]
Lid: 17082 ROP Error: 0x50C
Lid: 26937
Lid: 21921 StoreEc: 0x50C
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLogon [254]
Lid: 22787 Error: 0x0
Lid: 13032 StoreEc: 0x8004010F
Lid: 25848
Lid: 7588 StoreEc: 0x8004010F
Lid: 25840
Lid: 6564 StoreEc: 0x8004010F
Lid: 50999
Lid: 2567 StoreEc: 0x50C
Lid: 19452
Lid: 2199 StoreEc: 0x50C
Lid: 56415
Lid: 48223 StoreEc: 0x50C
Lid: 17097 StoreEc: 0x50C
Lid: 8620 StoreEc: 0x50C
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x50C
Lid: 26297
Lid: 16585 StoreEc: 0x50C
Lid: 32441
Lid: 1706 StoreEc: 0x50C
Lid: 24761
Lid: 20665 StoreEc: 0x50C
Lid: 25785
Lid: 29881 StoreEc: 0x50C
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.140).aspx?v=14.3.224.2&t=exchgf1&e=ms.exch.err.Ex7E66C2
Exchange Management Shell command attempted:
'ab.ad/CD/Users/doe, john' | New-MoveRequest -TargetDatabase 'Carlsbad_Mailbox'
Elapsed Time: 00:00:00
At this point, when trying to access the mailbox, exchange states its being moved... when trying to remove the move... Exchange does not see the move.
any help is appreciated,Hi Cudflyn,
Base on my search, you can try to increase the TCP Keep Alive Time for the servers involved in the move.You can refer to the following
article to increase it:
Mailbox Move Error - 'Couldn't switch the mailbox into Sync Source mode'
Note: Just REMEMBER to DELETE the registry entry when the mailbox moves are compete!
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
Can't create local mailbox in Mail
Hey guys,
I've had this problem with my new MBP where I can't create a mailbox locally on my Mac. This is usually done inside the Mail program by: Mailbox -> New Mailbox -> On My Mac.
The error I get is: Mailbox Creation Failed. Unable to create path ~/Library/Mail/Mailboxes/test.mbox.
Here's the error message that is shown in my console log:
2006-08-12 23:04:18.244 Mail[5431] couldn't create partial directory path /Users/blah/Library/Mail/Mailboxes/test.mbox
Does anyone have any ideas on how to fix this problem? Thanks in advance!
Macbook Pro Mac OS X (10.4.7) 2.16ghz, 2gb RAM, 100gb 7200rpm HD, glossy screenHi Chewy.
For some reason, ~/Library/Mail/Mailboxes sometimes is actually a file instead of a folder, thus causing the problem you're experiencing. Verify/repair your disk first, as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, proceed as follows:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/.
3. Locate Mailboxes. If it's a file instead of a folder, move it to the Trash.
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. -
Exchange 2010 SP3 mailbox move Problem
Hi,
I have a big problem with DB, when I want to move some mailbox from this DB to another (same server), move FAILED,
In Event log a found:
FailureType : MapiExceptionJetErrorKeyDuplicate
FailureSide : Source
Message : Error: MapiExceptionJetErrorKeyDuplicate: Unable to query table rows. (hr=0x80004005,ec=-1605)
I Try to run: New-MailboxRepairRequest -Mailbox bberak -CorruptionType ProvisionedFolder,SearchFolder,AggregateCounts,Folderview ... succesfull
I Try eseutil /g ... succesfull too
CAN YOU HELP MEEEEYes i try command
New-MailboxRepairRequest -Mailbox XXX -CorruptionType ProvisionedFolder,SearchFolder,AggregateCounts,Folderview –DetectOnly
I found in event log ... succesfull
I have problem with all mailbox in two DB and next two DB are OK
I want to migrate all mailbox in DB to new DB in the same server
I try command :
New-MailboxExportRequest -mailbox XXX-FilePath \\srvexchange\e$\pst\olga.snajdrova.pst ... progress fail about in 10%-20%
and too command:
New-MailboxExportRequest -mailbox pz -FilePath \\hv1-dca\tmp\pzetik.pst -verbose -BadItemLimit 50000000 -AcceptLargeDataLoss ... progress fail about in 10%-20%
I found error message:
Error: MapiExceptionJetErrorKeyDuplicate: Unabl
e to query table rows. (hr=0x80004005, ec=-1605
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [len
gth=100]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [e
c=0x0][length=69][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetContentsTable [5]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 17082 ROP Error: 0xFFFFF9BB
Lid: 17153
Lid: 21921 StoreEc: 0xFFFFF9BB
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFF9BB
Lid: 28414
Lid: 32510 StoreEc: 0xFFFFF9BB
I havn't account to www.experts-exchange.com -
Mailbox migration failing after Upgrading CU5 - CU6
hello fellow readers,
we have an Exchange 2007 (latest needed Patchlevel) / Exchange 2013 CU6 Environment and are now having trouble migrating user mailboxes from the Ex2007 mailbox server to the new Ex2013 server.
migration of the first boxes before applying CU6 went fine and smooth, but now all mailbox moves are stuck with the status "Qeued".
a ps command "get-moverequeststatistics karl.treiber" brings the following
Postfach 'Karl Treiber' wird zurzeit nicht verschoben. + CategoryInfo : InvalidArgument: (karl.treiber:MoveRequestIdParameter) [Get-MoveRequestStatistics], Mana gementObjectNotFoundException + FullyQualifiedErrorId : [Server=SERVERNAME,RequestId=bf51511d-c7b8-4b39-ad60-caa71015cc6c,TimeStamp=10.11.2014 11 :27:29] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 9B1AC428,Microsoft.Exchange.Management.Recipien tTasks.GetMoveRequestStatistics + PSComputerName : SERVERNAME.DOMAIN.local
i'm guessing that this is correct, as the migration hasn't started yet. in somehow similar threads people suggest putting the BadItemLimit higher, so i tried running ps command "set-moverequest karl.treiber -baditemlimit 9999" bringing the following
ARNUNG: Wenn ein Element nicht aus der Quelldatenbank gelesen oder in die Zieldatenbank geschrieben werden kann, wird
es als beschädigt betrachtet. Wenn Sie für 'BadItemLimit' einen anderen Wert als Null angeben, fordern Sie an, dass
Exchange diese Elemente nicht in das Zielpostfach kopiert. Nach Abschluss der Verschiebung sind diese beschädigten
Elemente nicht im Zielpostfach verfügbar.
Der Vorgang konnte nicht ausgeführt werden, weil keine Objekte des Typs
'Microsoft.Exchange.MailboxReplicationService.TransactionalRequestJob' auf 'DC.DOMAIN.local' gefunden wurden.
+ CategoryInfo : NotSpecified: (:) [Set-MoveRequest], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SERVERNAME,RequestId=ab82c24b-7914-4382-8de2-34462d4993b3,TimeStamp=10.11.2014 11
:38:01] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 285DB966,Microsoft.Exchange.Management.Recipien
tTasks.SetMoveRequest
+ PSComputerName : SERVERNAME.DOMAIN.local
my guess is, that something is missing in AD - but what? DC replication is checked and working as normal. i looked up the AD object of the user, searchung for Exchange values, finding some connecting to mailbox
moves, but none similar to "Microsoft.Exchange.MailboxReplicationService.TransactionalRequestJob".
everything worked in CU5 -> after updating to CU6 we had serious issues with mailbox databases in dirty shutdown and called MS or help. as mentioned
here this was a known error and they gave us the
hotfix for that. the hotfix seemed to be so "hot" that it fixed the database problem but brought new ones, as the fix seems to not check Exchange installation path, assuming its always c:\Program Files\... (which it is not in our case).
here they suggest to run "setup /preparedomain" again, but i am worried about possible new problems.
has anyone suggestions what to check?Hello KidStealth,
Please try the following steps:
1. Configure the database:
Get-MailboxDatabase | Set-MailboxDatabase –DataMoveReplicationConstraint None
2. We can run prepare domain, it will not cause any issue as I know.
3. Then we can try to move the mailboxes.
If issue persists, in my experience, this issue could be related to the corrupted items within the mailbox folders, so please remove the old move request, start a
new move request, use parameter “–verbose” behind the move request command, then check the detailed error message. Or we can check via command:
Get-MoveRequestStatistics -Identity “mailbox_name” –IncludeReport | fl >C:\error.txt
Please post the detailed error message. It it’s in English, I would appreciate it.
Regards, Eric Zou -
Emails in local mailboxes disappearing
I have a POP account and I'm accessing it only from one machine, my G5 dual 2GHz with 8GB RAM. Since I switched over from Eudora over the weekend, Mail.app has caused no end of headaches for me.
Occasionally, emails stored in various "On My Mac" local mailboxes have seen fit to just vanish, leaving what looks like a blank mailbox. Rebuilding the mailbox doesn't work. On the occasions that the emails do show up as a list, when I click on any individual email, it displays the infamous "The message from <Name> <[email protected]> concerning <Subject> has not been downloaded from the server. You need to take this account online in order to download it." message (which shouldn't be happening since the emails are already stored locally on my hard drive--this is a POP account after all and nobody has access to it but me and I'm only using one machine to access it). I have to re-import the emails using Mail.app's built-in menu option to do so. I cannot use the "remove the Envelope Index" trick because, in total, I have in excess of 560,000 emails in over 460 mailboxes that I need access to when searching for emails on a certain topic and having Mail.app reindex everything takes something close to 5 hours. I cannot be down for 5 hours. I have already run "Repair Permissions" using Disk Utility and have gotten a clean bill of health.
Is there anything I can do to make sure that my locally-stored emails just display their contents and not give me the dreaded " The message from <Name> <[email protected]> concerning <Subject> has not been downloaded from the server. You need to take this account online in order to download it." message or just display blank mailbox(es) and not have to rebuild the damned thing(s) all the time? Why is Mail.app so fragile anyway? I've used Eudora for decades in POP mode and have never experienced the problems that Mail.app has given me in a mere weekend.
PowerMac G5 dual 2GHz & MacBook Pro Core Duo Mac OS X (10.4.9)The recommended mailbox size limit for Tiger Mail is
2GB. Do any of 460 mailboxes approach or exceed this
limit?
I thought this artificial limit was removed after Panther? You're saying that it still exists? I sort my mailboxes by years so they are stored in this hierarchy:
<Topic> (contains current messages about <Topic>)
- <Topic>-200x (contains messages about <Topic> in year 200x so there could be many mailboxes at this level; when 2007 ends, I will have a <Topic>-2007 mailbox which I will move all email about this topic into, leaving the <Topic> mailbox only containing current emails for the year on that topic)
Now, this 2GB limit, is it just for the *.mbox folder or for just the Messages folder or for any hierarchy? When I do a "du -k" in some of my hierarchically filed mail, e.g., ~/Library/Mail/Mailboxes/Apple Lists, I get this:
1608 ./ACN/ACN Forums 2001.mbox/Messages
1612 ./ACN/ACN Forums 2001.mbox
11096 ./ACN/ACN Forums 2002.mbox/Messages
11100 ./ACN/ACN Forums 2002.mbox
31744 ./ACN/ACN Forums 2003.mbox/Messages
31748 ./ACN/ACN Forums 2003.mbox
65524 ./ACN/ACN Forums 2004.mbox/Messages
65528 ./ACN/ACN Forums 2004.mbox
130860 ./ACN/ACN Forums 2005.mbox/Messages
130864 ./ACN/ACN Forums 2005.mbox
175032 ./ACN/ACN Forums 2006.mbox/Messages
175036 ./ACN/ACN Forums 2006.mbox
415888 ./ACN
243280 ./ACN.mbox/Messages
243284 ./ACN.mbox
856 ./AppleScript.mbox/Messages
856 ./AppleScript.mbox
56 ./ARD.mbox/Messages
56 ./ARD.mbox
2652 ./Cocoa Dev.mbox/Messages
2652 ./Cocoa Dev.mbox
192 ./Mac Net Prog.mbox/Messages
192 ./Mac Net Prog.mbox
536 ./OpenGL.mbox/Messages
536 ./OpenGL.mbox
464 ./OSX Client.mbox/Messages
464 ./OSX Client.mbox
34624 ./OSX Svr/MacOS X Server Topics 2002.mbox/Messages
34628 ./OSX Svr/MacOS X Server Topics 2002.mbox
98904 ./OSX Svr/MacOS X Server Topics 2003.mbox/Messages
98908 ./OSX Svr/MacOS X Server Topics 2003.mbox
159824 ./OSX Svr/MacOS X Server Topics 2004.mbox/Messages
159828 ./OSX Svr/MacOS X Server Topics 2004.mbox
163916 ./OSX Svr/MacOS X Server Topics 2005.mbox/Messages
163920 ./OSX Svr/MacOS X Server Topics 2005.mbox
119972 ./OSX Svr/MacOS X Server Topics 2006.mbox/Messages
119976 ./OSX Svr/MacOS X Server Topics 2006.mbox
577260 ./OSX Svr
27828 ./OSX Svr.mbox/Messages
27832 ./OSX Svr.mbox
32 ./System Imaging.mbox/Messages
36 ./System Imaging.mbox
116 ./XSAN.mbox/Messages
116 ./XSAN.mbox
1269176 .
Which, as you can see, totals out to around 1.26GB for the ~/Library/Mail/Mailboxes/Apple Lists hierarchy and none of the individual .mbox or Messages folders exceeds 2GB. And some of the above folders have been the ones exhibiting the vanishing emails (i.e., they are there when I look at something once and then they are gone the next time I try to look again in those mailboxes). I've even experienced the disappearing mailbox phenomenon in mailbox hierarchies which, in total, do not exceed 500MB for all subfolders.
The "has not been downloaded from the server" error
message is not accurate and indicates what is called
an "overstuffed" mailbox issue which means the
mailbox has approached or exceeded the recommended
size limit or the mailbox has some corruption.
Oh crap. Sigh. I never had this issue with Eudora which has a 32767 email limit regardless of size of individual emails, attachments, etc.
Using the Finder, go to Home > Library > Mail. All
imported mailboxes are located within an Import named
folder located within the Mailboxes folder - Home >
Library > Mail > Mailboxes > Import > imported
mailboxes - which appear as folders at the Finder
level and include an .mbox extension.
Within any .mbox folder at the Finder level is a
Messages folder (which contains each message stored
in the mailbox as a separate .emix file) and an
Info.plist file. Any other folders and file names are
left over from the import process which are not
needed by Tiger Mail but are not deleted after the
import process is complete and can sometimes cause
problems.
Does "Rebuild" delete the Info.plist and recreate it?
There is also a Eudora mailbox cleaner utility which
may be helpful here.
Yes, this is what I used to bring my mailboxes over from Eudora. It doesn't work very well and I'm in contact with the developer who has given me a beta to try and it's a little better.
Do you sleep? ;~)
Rarely. I sometimes get by on 4 hours a night.
This can be done before you go to bed which will be
completed in the morning when you wake.
I was assuming that the "Remove Envelope Index" trick was to be used when in dire need, not a nightly event. Are you saying that it should be a nightly event? Sometimes it doesn't even complete, leaving some mailboxes in the same state as outlined in my original post, whereupon I have to do the "Import Mailboxes from Apple Mail" trick from within Mail.app itself but this gets old fast since I have to move the contents from the Import(-x) hierarchy to its "proper" place in my mail hierarchy and then wait for it to "rebuild" which takes a while but nowhere as long as 5 hours. Maybe 20 to 30 minutes. But multiply that by a couple of mailboxes and my day is shot.
PowerMac G5 dual 2GHz & MacBook Pro Core Duo Mac OS X (10.4.9) -
Mailbox move during DAG failover is stuck
I have a DAG setup on exchagne 2010. I had several mailbox moves going, some in progress and some queued. The destination mailbox database failed over to a different server. Now the inprogress and queued moves are stuck and I cant
suspend them. Any suggestions would be great.
Thank youI have a DAG setup on exchagne 2010. I had several mailbox moves going, some in progress and some queued. The destination mailbox database failed over to a different server. Now the inprogress and queued moves are stuck and I cant
suspend them. Any suggestions would be great.
Thank you
At some point they should resume.
What does get-moverequeststatistics show for the status?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Mailbox Move ForceOffline Parameter
Hell all,
scenario: Exchange 2013 RTM CU3, Exchange 2013 SP1 DAG
I'm trying to find a way to speed up Mailbox moves (local - from the RTM to the DAG environment) and I've pretty much exhausted all options I am aware of (MRS parameters, TCP Chimney, RSS etc.).
The one thing I haven't tried is the ForceOffline parameter, but unfortunately this switch appears to be very poorly documented.
Does anyone have any experience doing mailbox moves in "offline mode"? Does it speed up the transfer? Are the mailboxes automatically put back in "online mode" after the move?
Thx in advance!
M.Hi,
ForceOffline forces a mailbox move to be performed in offline mode, meaning the user will have no access to email during the mailbox move. There is no official article explaining that it speeds up the migration using ForceOffline parameter. Your understanding
will be appreciated.
What's more, after finishing the migration, users will have access to email. In other words, mailboxes put back in "online mode".
Hope my clarification can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support
Maybe you are looking for
-
Help!! Thank you!!!
Halo, i am doing a JSP program with Java script. Here i am facing some problems to passing the value for checking purposes. Basically, i want to retrieve value from database and pass to JS function to check whether have any "empty value" or not. If g
-
Deskjet 6988, wireless printing not working. Network light blinking.
Deskjet 6988 will only print when connected via USB, used to work wirelessly.....now network light on printer blinks. Please assist.
-
My display sometimes reverts to the lowest brightness setting, but the computer doesn't recognize that it's on the lowest setting, and therefore I can not tell the display to get brighter. The only way to fix this that I have figured out so far is to
-
Customer master creation or entering data into customer master.
Hi Friends Can any give good example to create customer master from Account group to entering customer master data? so that to move forward. Thanks in advance.
-
Error in Loading Daemon plist programmatically
I'm trying to a Load LaunchDaemon plist from my Mac Application.When i try to load it in terminal it loads successfully, but when i try to load it thru my code, it doesn't work. Here is my code : OSStatus status; Authorization